Lines Matching refs:Modes
460 Disqualifies specific modes for an IDE device.
463 drivers) to reject certain timing modes and request the IDE controller driver
464 to recalculate modes. This function allows the driver entity and the IDE
467 is when the IDE device fails to accept the timing modes that are calculated
470 If the driver entity does not want to limit the ATA timing modes and leave that
473 modes that are listed in EFI_ATA_COLLECTIVE_MODE.
475 The driver entity may disqualify modes for a device in any order and any number
478 This function can be called multiple times to invalidate multiple modes of the
479 same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI
480 specification for more information on PIO modes.
490 @param[in] BadModes The modes that the device does not support and that
493 @retval EFI_SUCCESS The modes were accepted without any errors.
512 Returns the information about the optimum modes for the specified IDE device.
514 This function is used by the driver entity to obtain the optimum ATA modes for
551 @param[out] SupportedModes The optimum modes for the device.
557 @retval EFI_NOT_READY Modes cannot be calculated due to a lack of
591 driver to program the IDE controller hardware to the specified modes. This
599 @param[in] Modes The modes to set.
604 @retval EFI_NOT_READY Modes cannot be set at this time due to lack of data.
605 @retval EFI_DEVICE_ERROR Modes cannot be set due to hardware failure.
615 IN EFI_ATA_COLLECTIVE_MODE *Modes
