1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2011-2012 4 * Pali Rohr <pali.rohar (at) gmail.com> 5 * 6 * (C) Copyright 2010 7 * Alistair Buxton <a.j.buxton (at) gmail.com> 8 * 9 * Derived from Beagle Board code: 10 * (C) Copyright 2006-2008 11 * Texas Instruments. 12 * Richard Woodruff <r-woodruff2 (at) ti.com> 13 * Syed Mohammed Khasim <x0khasim (at) ti.com> 14 * 15 * Configuration settings for the Nokia RX-51 aka N900. 16 */ 17 18 #ifndef __CONFIG_H 19 #define __CONFIG_H 20 21 /* 22 * High Level Configuration Options 23 */ 24 #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ 25 26 #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 27 28 /* 29 * Nokia X-Loader loading secondary image to address 0x80400000 30 * NOLO loading boot image to random place, so it doesn't really 31 * matter what we set this to. We have to copy u-boot to this address 32 */ 33 34 #include <asm/arch/cpu.h> /* get chip and board defs */ 35 #include <asm/arch/omap.h> 36 #include <asm/arch/mem.h> 37 #include <linux/stringify.h> 38 39 /* Clock Defines */ 40 #define V_OSCK 26000000 /* Clock output from T2 */ 41 #define V_SCLK (V_OSCK >> 1) 42 43 #define CONFIG_MISC_INIT_R 44 #define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */ 45 46 #define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */ 47 #define CONFIG_INITRD_TAG /* enable passing initrd */ 48 #define CONFIG_REVISION_TAG /* enable passing revision tag*/ 49 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 50 51 /* 52 * Size of malloc() pool 53 */ 54 #define CONFIG_ENV_SIZE (128 << 10) 55 #define CONFIG_UBI_SIZE (512 << 10) 56 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \ 57 (128 << 10)) 58 59 /* 60 * Hardware drivers 61 */ 62 63 /* 64 * NS16550 Configuration 65 */ 66 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 67 68 #define CONFIG_SYS_NS16550_SERIAL 69 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 70 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 71 72 /* 73 * select serial console configuration 74 */ 75 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 76 #define CONFIG_SERIAL3 3 /* UART3 on RX-51 */ 77 78 /* allow to overwrite serial and ethaddr */ 79 #define CONFIG_ENV_OVERWRITE 80 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } 81 82 /* USB device configuration */ 83 #define CONFIG_USB_DEVICE 84 #define CONFIG_USBD_VENDORID 0x0421 85 #define CONFIG_USBD_PRODUCTID 0x01c8 86 #define CONFIG_USBD_MANUFACTURER "Nokia" 87 #define CONFIG_USBD_PRODUCT_NAME "N900" 88 89 /* commands to include */ 90 91 #define CONFIG_SYS_I2C 92 93 /* 94 * TWL4030 95 */ 96 #define CONFIG_TWL4030_LED 97 #define CONFIG_TWL4030_KEYPAD 98 99 #define GPIO_SLIDE 71 100 101 /* 102 * Board ONENAND Info. 103 */ 104 105 #define PART1_NAME "bootloader" 106 #define PART1_SIZE 128 107 #define PART1_MULL 1024 108 #define PART1_SUFF "k" 109 #define PART1_OFFS 0x00000000 110 #define PART1_MASK 0x00000003 111 112 #define PART2_NAME "config" 113 #define PART2_SIZE 384 114 #define PART2_MULL 1024 115 #define PART2_SUFF "k" 116 #define PART2_OFFS 0x00020000 117 #define PART2_MASK 0x00000000 118 119 #define PART3_NAME "log" 120 #define PART3_SIZE 256 121 #define PART3_MULL 1024 122 #define PART3_SUFF "k" 123 #define PART3_OFFS 0x00080000 124 #define PART3_MASK 0x00000000 125 126 #define PART4_NAME "kernel" 127 #define PART4_SIZE 2 128 #define PART4_MULL 1024*1024 129 #define PART4_SUFF "m" 130 #define PART4_OFFS 0x000c0000 131 #define PART4_MASK 0x00000000 132 133 #define PART5_NAME "initfs" 134 #define PART5_SIZE 2 135 #define PART5_MULL 1024*1024 136 #define PART5_SUFF "m" 137 #define PART5_OFFS 0x002c0000 138 #define PART5_MASK 0x00000000 139 140 #define PART6_NAME "rootfs" 141 #define PART6_SIZE 257280 142 #define PART6_MULL 1024 143 #define PART6_SUFF "k" 144 #define PART6_OFFS 0x004c0000 145 #define PART6_MASK 0x00000000 146 147 #ifdef ONENAND_SUPPORT 148 149 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP 150 #define CONFIG_MTD_DEVICE 151 #define CONFIG_MTD_PARTITIONS 152 153 #endif 154 155 /* Watchdog support */ 156 #define CONFIG_HW_WATCHDOG 157 158 /* 159 * Framebuffer 160 */ 161 /* Video console */ 162 #define CONFIG_VIDEO_LOGO 163 #define VIDEO_FB_16BPP_PIXEL_SWAP 164 #define VIDEO_FB_16BPP_WORD_SWAP 165 #define CONFIG_SPLASH_SCREEN 166 167 /* functions for cfb_console */ 168 #define VIDEO_KBD_INIT_FCT rx51_kp_init() 169 #define VIDEO_TSTC_FCT rx51_kp_tstc 170 #define VIDEO_GETC_FCT rx51_kp_getc 171 #ifndef __ASSEMBLY__ 172 struct stdio_dev; 173 int rx51_kp_init(void); 174 int rx51_kp_tstc(struct stdio_dev *sdev); 175 int rx51_kp_getc(struct stdio_dev *sdev); 176 #endif 177 178 /* Environment information */ 179 #ifdef CONFIG_MTDPARTS_DEFAULT 180 #define MTDPARTS "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" 181 #else 182 #define MTDPARTS 183 #endif 184 #define CONFIG_EXTRA_ENV_SETTINGS \ 185 MTDPARTS \ 186 "usbtty=cdc_acm\0" \ 187 "stdin=vga\0" \ 188 "stdout=vga\0" \ 189 "stderr=vga\0" \ 190 "setcon=setenv stdin ${con};" \ 191 "setenv stdout ${con};" \ 192 "setenv stderr ${con}\0" \ 193 "sercon=setenv con serial; run setcon\0" \ 194 "usbcon=setenv con usbtty; run setcon\0" \ 195 "vgacon=setenv con vga; run setcon\0" \ 196 "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ 197 "switchmmc=mmc dev ${mmcnum}\0" \ 198 "kernaddr=0x82008000\0" \ 199 "initrdaddr=0x84008000\0" \ 200 "scriptaddr=0x86008000\0" \ 201 "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \ 202 "${loadaddr} ${mmcfile}\0" \ 203 "kernload=setenv loadaddr ${kernaddr};" \ 204 "setenv mmcfile ${mmckernfile};" \ 205 "run fileload\0" \ 206 "initrdload=setenv loadaddr ${initrdaddr};" \ 207 "setenv mmcfile ${mmcinitrdfile};" \ 208 "run fileload\0" \ 209 "scriptload=setenv loadaddr ${scriptaddr};" \ 210 "setenv mmcfile ${mmcscriptfile};" \ 211 "run fileload\0" \ 212 "scriptboot=echo Running ${mmcscriptfile} from mmc " \ 213 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \ 214 "kernboot=echo Booting ${mmckernfile} from mmc " \ 215 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \ 216 "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\ 217 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \ 218 "attachboot=echo Booting attached kernel image ...;" \ 219 "setenv setup_omap_atag 1;" \ 220 "bootm ${attkernaddr};" \ 221 "setenv setup_omap_atag\0" \ 222 "trymmcscriptboot=if run switchmmc; then " \ 223 "if run scriptload; then " \ 224 "run scriptboot;" \ 225 "fi;" \ 226 "fi\0" \ 227 "trymmckernboot=if run switchmmc; then " \ 228 "if run kernload; then " \ 229 "run kernboot;" \ 230 "fi;" \ 231 "fi\0" \ 232 "trymmckerninitrdboot=if run switchmmc; then " \ 233 "if run initrdload; then " \ 234 "if run kernload; then " \ 235 "run kerninitrdboot;" \ 236 "fi;" \ 237 "fi; " \ 238 "fi\0" \ 239 "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \ 240 "setenv mmckernfile uImage; run trymmckernboot\0" \ 241 "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \ 242 "setenv mmcpart 2; run trymmcpartboot;" \ 243 "setenv mmcpart 3; run trymmcpartboot;" \ 244 "setenv mmcpart 4; run trymmcpartboot\0" \ 245 "trymmcboot=if run switchmmc; then " \ 246 "setenv mmctype fat;" \ 247 "run trymmcallpartboot;" \ 248 "setenv mmctype ext2;" \ 249 "run trymmcallpartboot;" \ 250 "setenv mmctype ext4;" \ 251 "run trymmcallpartboot;" \ 252 "fi\0" \ 253 "emmcboot=setenv mmcnum 1; run trymmcboot\0" \ 254 "sdboot=setenv mmcnum 0; run trymmcboot\0" \ 255 "menucmd=bootmenu\0" \ 256 "bootmenu_0=Attached kernel=run attachboot\0" \ 257 "bootmenu_1=Internal eMMC=run emmcboot\0" \ 258 "bootmenu_2=External SD card=run sdboot\0" \ 259 "bootmenu_3=U-Boot boot order=boot\0" \ 260 "bootmenu_delay=30\0" \ 261 "" 262 263 #define CONFIG_PREBOOT \ 264 "setenv mmcnum 1; setenv mmcpart 1;" \ 265 "setenv mmcscriptfile bootmenu.scr;" \ 266 "if run switchmmc; then " \ 267 "setenv mmcdone true;" \ 268 "setenv mmctype fat;" \ 269 "if run scriptload; then true; else " \ 270 "setenv mmctype ext2;" \ 271 "if run scriptload; then true; else " \ 272 "setenv mmctype ext4;" \ 273 "if run scriptload; then true; else " \ 274 "setenv mmcdone false;" \ 275 "fi;" \ 276 "fi;" \ 277 "fi;" \ 278 "if ${mmcdone}; then " \ 279 "run scriptboot;" \ 280 "fi;" \ 281 "fi;" \ 282 "if run slide; then true; else " \ 283 "setenv bootmenu_delay 0;" \ 284 "setenv bootdelay 0;" \ 285 "fi" 286 287 #define CONFIG_POSTBOOTMENU \ 288 "echo;" \ 289 "echo Extra commands:;" \ 290 "echo run sercon - Use serial port for control.;" \ 291 "echo run usbcon - Use usbtty for control.;" \ 292 "echo run vgacon - Use framebuffer/keyboard.;" \ 293 "echo run sdboot - Boot from SD card slot.;" \ 294 "echo run emmcboot - Boot internal eMMC memory.;" \ 295 "echo run attachboot - Boot attached kernel image.;" \ 296 "echo" 297 298 #define CONFIG_BOOTCOMMAND \ 299 "run sdboot;" \ 300 "run emmcboot;" \ 301 "run attachboot;" \ 302 "echo" 303 304 #define CONFIG_MENU_SHOW 305 306 /* 307 * Miscellaneous configurable options 308 */ 309 310 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 311 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/ 312 313 /* default load address */ 314 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) 315 316 /* 317 * OMAP3 has 12 GP timers, they can be driven by the system clock 318 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 319 * This rate is divided by a local divisor. 320 */ 321 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) 322 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 323 324 /* 325 * Physical Memory Map 326 */ 327 #define CONFIG_NR_DRAM_BANKS 2 328 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 329 330 /* 331 * FLASH and environment organization 332 */ 333 334 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 335 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 336 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 337 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 338 CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 339 340 /* 341 * Attached kernel image 342 */ 343 344 #define SDRAM_SIZE 0x10000000 /* 256 MB */ 345 #define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE) 346 347 #define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */ 348 #define KERNEL_OFFSET 0x40000 /* 256 kB */ 349 #define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET) 350 #define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE) 351 352 /* Reserve protected RAM for attached kernel */ 353 #define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1) 354 355 #endif /* __CONFIG_H */ 356
