1 /* Portions are Copyright (C) 2011 Google Inc */ 2 /* ***** BEGIN LICENSE BLOCK ***** 3 * Version: MPL 1.1/GPL 2.0/LGPL 2.1 4 * 5 * The contents of this file are subject to the Mozilla Public License Version 6 * 1.1 (the "License"); you may not use this file except in compliance with 7 * the License. You may obtain a copy of the License at 8 * http://www.mozilla.org/MPL/ 9 * 10 * Software distributed under the License is distributed on an "AS IS" basis, 11 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License 12 * for the specific language governing rights and limitations under the 13 * License. 14 * 15 * The Original Code is the Netscape Portable Runtime (NSPR). 16 * 17 * The Initial Developer of the Original Code is 18 * Netscape Communications Corporation. 19 * Portions created by the Initial Developer are Copyright (C) 1998-2000 20 * the Initial Developer. All Rights Reserved. 21 * 22 * Contributor(s): 23 * 24 * Alternatively, the contents of this file may be used under the terms of 25 * either the GNU General Public License Version 2 or later (the "GPL"), or 26 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), 27 * in which case the provisions of the GPL or the LGPL are applicable instead 28 * of those above. If you wish to allow use of your version of this file only 29 * under the terms of either the GPL or the LGPL, and not to allow others to 30 * use your version of this file under the terms of the MPL, indicate your 31 * decision by deleting the provisions above and replace them with the notice 32 * and other provisions required by the GPL or the LGPL. If you do not delete 33 * the provisions above, a recipient may use your version of this file under 34 * the terms of any one of the MPL, the GPL or the LGPL. 35 * 36 * ***** END LICENSE BLOCK ***** */ 37 38 /* 39 * prtime.cc -- 40 * NOTE: The original nspr file name is prtime.c 41 * 42 * NSPR date and time functions 43 * 44 * CVS revision 3.37 45 */ 46 47 /* 48 * The following functions were copied from the NSPR prtime.c file. 49 * PR_ParseTimeString 50 * We inlined the new PR_ParseTimeStringToExplodedTime function to avoid 51 * copying PR_ExplodeTime and PR_LocalTimeParameters. (The PR_ExplodeTime 52 * and PR_ImplodeTime calls cancel each other out.) 53 * PR_NormalizeTime 54 * PR_GMTParameters 55 * PR_ImplodeTime 56 * Upstream implementation from 57 * http://lxr.mozilla.org/nspr/source/pr/src/misc/prtime.c#221 58 * All types and macros are defined in the base/third_party/prtime.h file. 59 * These have been copied from the following nspr files. We have only copied 60 * over the types we need. 61 * 1. prtime.h 62 * 2. prtypes.h 63 * 3. prlong.h 64 * 65 * Unit tests are in base/time/pr_time_unittest.cc. 66 */ 67 68 #include <limits.h> 69 70 #include "base/logging.h" 71 #include "base/third_party/nspr/prtime.h" 72 #include "build/build_config.h" 73 74 #include <errno.h> /* for EINVAL */ 75 #include <time.h> 76 77 /* 78 * The COUNT_LEAPS macro counts the number of leap years passed by 79 * till the start of the given year Y. At the start of the year 4 80 * A.D. the number of leap years passed by is 0, while at the start of 81 * the year 5 A.D. this count is 1. The number of years divisible by 82 * 100 but not divisible by 400 (the non-leap years) is deducted from 83 * the count to get the correct number of leap years. 84 * 85 * The COUNT_DAYS macro counts the number of days since 01/01/01 till the 86 * start of the given year Y. The number of days at the start of the year 87 * 1 is 0 while the number of days at the start of the year 2 is 365 88 * (which is ((2)-1) * 365) and so on. The reference point is 01/01/01 89 * midnight 00:00:00. 90 */ 91 92 #define COUNT_LEAPS(Y) (((Y)-1) / 4 - ((Y)-1) / 100 + ((Y)-1) / 400) 93 #define COUNT_DAYS(Y) (((Y)-1) * 365 + COUNT_LEAPS(Y)) 94 #define DAYS_BETWEEN_YEARS(A, B) (COUNT_DAYS(B) - COUNT_DAYS(A)) 95 96 /* Implements the Unix localtime_r() function for windows */ 97 #if defined(OS_WIN) 98 static void localtime_r(const time_t* secs, struct tm* time) { 99 (void) localtime_s(time, secs); 100 } 101 #endif 102 103 /* 104 * Static variables used by functions in this file 105 */ 106 107 /* 108 * The following array contains the day of year for the last day of 109 * each month, where index 1 is January, and day 0 is January 1. 110 */ 111 112 static const int lastDayOfMonth[2][13] = { 113 {-1, 30, 58, 89, 119, 150, 180, 211, 242, 272, 303, 333, 364}, 114 {-1, 30, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365} 115 }; 116 117 /* 118 * The number of days in a month 119 */ 120 121 static const PRInt8 nDays[2][12] = { 122 {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}, 123 {31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31} 124 }; 125 126 /* 127 *------------------------------------------------------------------------ 128 * 129 * PR_ImplodeTime -- 130 * 131 * Cf. time_t mktime(struct tm *tp) 132 * Note that 1 year has < 2^25 seconds. So an PRInt32 is large enough. 133 * 134 *------------------------------------------------------------------------ 135 */ 136 PRTime 137 PR_ImplodeTime(const PRExplodedTime *exploded) 138 { 139 PRExplodedTime copy; 140 PRTime retVal; 141 PRInt64 secPerDay, usecPerSec; 142 PRInt64 temp; 143 PRInt64 numSecs64; 144 PRInt32 numDays; 145 PRInt32 numSecs; 146 147 /* Normalize first. Do this on our copy */ 148 copy = *exploded; 149 PR_NormalizeTime(©, PR_GMTParameters); 150 151 numDays = DAYS_BETWEEN_YEARS(1970, copy.tm_year); 152 153 numSecs = copy.tm_yday * 86400 + copy.tm_hour * 3600 + copy.tm_min * 60 + 154 copy.tm_sec; 155 156 LL_I2L(temp, numDays); 157 LL_I2L(secPerDay, 86400); 158 LL_MUL(temp, temp, secPerDay); 159 LL_I2L(numSecs64, numSecs); 160 LL_ADD(numSecs64, numSecs64, temp); 161 162 /* apply the GMT and DST offsets */ 163 LL_I2L(temp, copy.tm_params.tp_gmt_offset); 164 LL_SUB(numSecs64, numSecs64, temp); 165 LL_I2L(temp, copy.tm_params.tp_dst_offset); 166 LL_SUB(numSecs64, numSecs64, temp); 167 168 LL_I2L(usecPerSec, 1000000L); 169 LL_MUL(temp, numSecs64, usecPerSec); 170 LL_I2L(retVal, copy.tm_usec); 171 LL_ADD(retVal, retVal, temp); 172 173 return retVal; 174 } 175 176 /* 177 *------------------------------------------------------------------------- 178 * 179 * IsLeapYear -- 180 * 181 * Returns 1 if the year is a leap year, 0 otherwise. 182 * 183 *------------------------------------------------------------------------- 184 */ 185 186 static int IsLeapYear(PRInt16 year) 187 { 188 if ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0) 189 return 1; 190 else 191 return 0; 192 } 193 194 /* 195 * 'secOffset' should be less than 86400 (i.e., a day). 196 * 'time' should point to a normalized PRExplodedTime. 197 */ 198 199 static void 200 ApplySecOffset(PRExplodedTime *time, PRInt32 secOffset) 201 { 202 time->tm_sec += secOffset; 203 204 /* Note that in this implementation we do not count leap seconds */ 205 if (time->tm_sec < 0 || time->tm_sec >= 60) { 206 time->tm_min += time->tm_sec / 60; 207 time->tm_sec %= 60; 208 if (time->tm_sec < 0) { 209 time->tm_sec += 60; 210 time->tm_min--; 211 } 212 } 213 214 if (time->tm_min < 0 || time->tm_min >= 60) { 215 time->tm_hour += time->tm_min / 60; 216 time->tm_min %= 60; 217 if (time->tm_min < 0) { 218 time->tm_min += 60; 219 time->tm_hour--; 220 } 221 } 222 223 if (time->tm_hour < 0) { 224 /* Decrement mday, yday, and wday */ 225 time->tm_hour += 24; 226 time->tm_mday--; 227 time->tm_yday--; 228 if (time->tm_mday < 1) { 229 time->tm_month--; 230 if (time->tm_month < 0) { 231 time->tm_month = 11; 232 time->tm_year--; 233 if (IsLeapYear(time->tm_year)) 234 time->tm_yday = 365; 235 else 236 time->tm_yday = 364; 237 } 238 time->tm_mday = nDays[IsLeapYear(time->tm_year)][time->tm_month]; 239 } 240 time->tm_wday--; 241 if (time->tm_wday < 0) 242 time->tm_wday = 6; 243 } else if (time->tm_hour > 23) { 244 /* Increment mday, yday, and wday */ 245 time->tm_hour -= 24; 246 time->tm_mday++; 247 time->tm_yday++; 248 if (time->tm_mday > 249 nDays[IsLeapYear(time->tm_year)][time->tm_month]) { 250 time->tm_mday = 1; 251 time->tm_month++; 252 if (time->tm_month > 11) { 253 time->tm_month = 0; 254 time->tm_year++; 255 time->tm_yday = 0; 256 } 257 } 258 time->tm_wday++; 259 if (time->tm_wday > 6) 260 time->tm_wday = 0; 261 } 262 } 263 264 void 265 PR_NormalizeTime(PRExplodedTime *time, PRTimeParamFn params) 266 { 267 int daysInMonth; 268 PRInt32 numDays; 269 270 /* Get back to GMT */ 271 time->tm_sec -= time->tm_params.tp_gmt_offset 272 + time->tm_params.tp_dst_offset; 273 time->tm_params.tp_gmt_offset = 0; 274 time->tm_params.tp_dst_offset = 0; 275 276 /* Now normalize GMT */ 277 278 if (time->tm_usec < 0 || time->tm_usec >= 1000000) { 279 time->tm_sec += time->tm_usec / 1000000; 280 time->tm_usec %= 1000000; 281 if (time->tm_usec < 0) { 282 time->tm_usec += 1000000; 283 time->tm_sec--; 284 } 285 } 286 287 /* Note that we do not count leap seconds in this implementation */ 288 if (time->tm_sec < 0 || time->tm_sec >= 60) { 289 time->tm_min += time->tm_sec / 60; 290 time->tm_sec %= 60; 291 if (time->tm_sec < 0) { 292 time->tm_sec += 60; 293 time->tm_min--; 294 } 295 } 296 297 if (time->tm_min < 0 || time->tm_min >= 60) { 298 time->tm_hour += time->tm_min / 60; 299 time->tm_min %= 60; 300 if (time->tm_min < 0) { 301 time->tm_min += 60; 302 time->tm_hour--; 303 } 304 } 305 306 if (time->tm_hour < 0 || time->tm_hour >= 24) { 307 time->tm_mday += time->tm_hour / 24; 308 time->tm_hour %= 24; 309 if (time->tm_hour < 0) { 310 time->tm_hour += 24; 311 time->tm_mday--; 312 } 313 } 314 315 /* Normalize month and year before mday */ 316 if (time->tm_month < 0 || time->tm_month >= 12) { 317 time->tm_year += static_cast<PRInt16>(time->tm_month / 12); 318 time->tm_month %= 12; 319 if (time->tm_month < 0) { 320 time->tm_month += 12; 321 time->tm_year--; 322 } 323 } 324 325 /* Now that month and year are in proper range, normalize mday */ 326 327 if (time->tm_mday < 1) { 328 /* mday too small */ 329 do { 330 /* the previous month */ 331 time->tm_month--; 332 if (time->tm_month < 0) { 333 time->tm_month = 11; 334 time->tm_year--; 335 } 336 time->tm_mday += nDays[IsLeapYear(time->tm_year)][time->tm_month]; 337 } while (time->tm_mday < 1); 338 } else { 339 daysInMonth = nDays[IsLeapYear(time->tm_year)][time->tm_month]; 340 while (time->tm_mday > daysInMonth) { 341 /* mday too large */ 342 time->tm_mday -= daysInMonth; 343 time->tm_month++; 344 if (time->tm_month > 11) { 345 time->tm_month = 0; 346 time->tm_year++; 347 } 348 daysInMonth = nDays[IsLeapYear(time->tm_year)][time->tm_month]; 349 } 350 } 351 352 /* Recompute yday and wday */ 353 time->tm_yday = static_cast<PRInt16>(time->tm_mday + 354 lastDayOfMonth[IsLeapYear(time->tm_year)][time->tm_month]); 355 356 numDays = DAYS_BETWEEN_YEARS(1970, time->tm_year) + time->tm_yday; 357 time->tm_wday = (numDays + 4) % 7; 358 if (time->tm_wday < 0) { 359 time->tm_wday += 7; 360 } 361 362 /* Recompute time parameters */ 363 364 time->tm_params = params(time); 365 366 ApplySecOffset(time, time->tm_params.tp_gmt_offset 367 + time->tm_params.tp_dst_offset); 368 } 369 370 /* 371 *------------------------------------------------------------------------ 372 * 373 * PR_GMTParameters -- 374 * 375 * Returns the PRTimeParameters for Greenwich Mean Time. 376 * Trivially, both the tp_gmt_offset and tp_dst_offset fields are 0. 377 * 378 *------------------------------------------------------------------------ 379 */ 380 381 PRTimeParameters 382 PR_GMTParameters(const PRExplodedTime *gmt) 383 { 384 PRTimeParameters retVal = { 0, 0 }; 385 return retVal; 386 } 387 388 /* 389 * The following code implements PR_ParseTimeString(). It is based on 390 * ns/lib/xp/xp_time.c, revision 1.25, by Jamie Zawinski <jwz (at) netscape.com>. 391 */ 392 393 /* 394 * We only recognize the abbreviations of a small subset of time zones 395 * in North America, Europe, and Japan. 396 * 397 * PST/PDT: Pacific Standard/Daylight Time 398 * MST/MDT: Mountain Standard/Daylight Time 399 * CST/CDT: Central Standard/Daylight Time 400 * EST/EDT: Eastern Standard/Daylight Time 401 * AST: Atlantic Standard Time 402 * NST: Newfoundland Standard Time 403 * GMT: Greenwich Mean Time 404 * BST: British Summer Time 405 * MET: Middle Europe Time 406 * EET: Eastern Europe Time 407 * JST: Japan Standard Time 408 */ 409 410 typedef enum 411 { 412 TT_UNKNOWN, 413 414 TT_SUN, TT_MON, TT_TUE, TT_WED, TT_THU, TT_FRI, TT_SAT, 415 416 TT_JAN, TT_FEB, TT_MAR, TT_APR, TT_MAY, TT_JUN, 417 TT_JUL, TT_AUG, TT_SEP, TT_OCT, TT_NOV, TT_DEC, 418 419 TT_PST, TT_PDT, TT_MST, TT_MDT, TT_CST, TT_CDT, TT_EST, TT_EDT, 420 TT_AST, TT_NST, TT_GMT, TT_BST, TT_MET, TT_EET, TT_JST 421 } TIME_TOKEN; 422 423 /* 424 * This parses a time/date string into a PRTime 425 * (microseconds after "1-Jan-1970 00:00:00 GMT"). 426 * It returns PR_SUCCESS on success, and PR_FAILURE 427 * if the time/date string can't be parsed. 428 * 429 * Many formats are handled, including: 430 * 431 * 14 Apr 89 03:20:12 432 * 14 Apr 89 03:20 GMT 433 * Fri, 17 Mar 89 4:01:33 434 * Fri, 17 Mar 89 4:01 GMT 435 * Mon Jan 16 16:12 PDT 1989 436 * Mon Jan 16 16:12 +0130 1989 437 * 6 May 1992 16:41-JST (Wednesday) 438 * 22-AUG-1993 10:59:12.82 439 * 22-AUG-1993 10:59pm 440 * 22-AUG-1993 12:59am 441 * 22-AUG-1993 12:59 PM 442 * Friday, August 04, 1995 3:54 PM 443 * 06/21/95 04:24:34 PM 444 * 20/06/95 21:07 445 * 95-06-08 19:32:48 EDT 446 * 1995-06-17T23:11:25.342156Z 447 * 448 * If the input string doesn't contain a description of the timezone, 449 * we consult the `default_to_gmt' to decide whether the string should 450 * be interpreted relative to the local time zone (PR_FALSE) or GMT (PR_TRUE). 451 * The correct value for this argument depends on what standard specified 452 * the time string which you are parsing. 453 */ 454 455 PRStatus 456 PR_ParseTimeString( 457 const char *string, 458 PRBool default_to_gmt, 459 PRTime *result_imploded) 460 { 461 PRExplodedTime tm; 462 PRExplodedTime *result = &tm; 463 TIME_TOKEN dotw = TT_UNKNOWN; 464 TIME_TOKEN month = TT_UNKNOWN; 465 TIME_TOKEN zone = TT_UNKNOWN; 466 int zone_offset = -1; 467 int dst_offset = 0; 468 int date = -1; 469 PRInt32 year = -1; 470 int hour = -1; 471 int min = -1; 472 int sec = -1; 473 int usec = -1; 474 475 const char *rest = string; 476 477 int iterations = 0; 478 479 PR_ASSERT(string && result); 480 if (!string || !result) return PR_FAILURE; 481 482 while (*rest) 483 { 484 485 if (iterations++ > 1000) 486 { 487 return PR_FAILURE; 488 } 489 490 switch (*rest) 491 { 492 case 'a': case 'A': 493 if (month == TT_UNKNOWN && 494 (rest[1] == 'p' || rest[1] == 'P') && 495 (rest[2] == 'r' || rest[2] == 'R')) 496 month = TT_APR; 497 else if (zone == TT_UNKNOWN && 498 (rest[1] == 's' || rest[1] == 'S') && 499 (rest[2] == 't' || rest[2] == 'T')) 500 zone = TT_AST; 501 else if (month == TT_UNKNOWN && 502 (rest[1] == 'u' || rest[1] == 'U') && 503 (rest[2] == 'g' || rest[2] == 'G')) 504 month = TT_AUG; 505 break; 506 case 'b': case 'B': 507 if (zone == TT_UNKNOWN && 508 (rest[1] == 's' || rest[1] == 'S') && 509 (rest[2] == 't' || rest[2] == 'T')) 510 zone = TT_BST; 511 break; 512 case 'c': case 'C': 513 if (zone == TT_UNKNOWN && 514 (rest[1] == 'd' || rest[1] == 'D') && 515 (rest[2] == 't' || rest[2] == 'T')) 516 zone = TT_CDT; 517 else if (zone == TT_UNKNOWN && 518 (rest[1] == 's' || rest[1] == 'S') && 519 (rest[2] == 't' || rest[2] == 'T')) 520 zone = TT_CST; 521 break; 522 case 'd': case 'D': 523 if (month == TT_UNKNOWN && 524 (rest[1] == 'e' || rest[1] == 'E') && 525 (rest[2] == 'c' || rest[2] == 'C')) 526 month = TT_DEC; 527 break; 528 case 'e': case 'E': 529 if (zone == TT_UNKNOWN && 530 (rest[1] == 'd' || rest[1] == 'D') && 531 (rest[2] == 't' || rest[2] == 'T')) 532 zone = TT_EDT; 533 else if (zone == TT_UNKNOWN && 534 (rest[1] == 'e' || rest[1] == 'E') && 535 (rest[2] == 't' || rest[2] == 'T')) 536 zone = TT_EET; 537 else if (zone == TT_UNKNOWN && 538 (rest[1] == 's' || rest[1] == 'S') && 539 (rest[2] == 't' || rest[2] == 'T')) 540 zone = TT_EST; 541 break; 542 case 'f': case 'F': 543 if (month == TT_UNKNOWN && 544 (rest[1] == 'e' || rest[1] == 'E') && 545 (rest[2] == 'b' || rest[2] == 'B')) 546 month = TT_FEB; 547 else if (dotw == TT_UNKNOWN && 548 (rest[1] == 'r' || rest[1] == 'R') && 549 (rest[2] == 'i' || rest[2] == 'I')) 550 dotw = TT_FRI; 551 break; 552 case 'g': case 'G': 553 if (zone == TT_UNKNOWN && 554 (rest[1] == 'm' || rest[1] == 'M') && 555 (rest[2] == 't' || rest[2] == 'T')) 556 zone = TT_GMT; 557 break; 558 case 'j': case 'J': 559 if (month == TT_UNKNOWN && 560 (rest[1] == 'a' || rest[1] == 'A') && 561 (rest[2] == 'n' || rest[2] == 'N')) 562 month = TT_JAN; 563 else if (zone == TT_UNKNOWN && 564 (rest[1] == 's' || rest[1] == 'S') && 565 (rest[2] == 't' || rest[2] == 'T')) 566 zone = TT_JST; 567 else if (month == TT_UNKNOWN && 568 (rest[1] == 'u' || rest[1] == 'U') && 569 (rest[2] == 'l' || rest[2] == 'L')) 570 month = TT_JUL; 571 else if (month == TT_UNKNOWN && 572 (rest[1] == 'u' || rest[1] == 'U') && 573 (rest[2] == 'n' || rest[2] == 'N')) 574 month = TT_JUN; 575 break; 576 case 'm': case 'M': 577 if (month == TT_UNKNOWN && 578 (rest[1] == 'a' || rest[1] == 'A') && 579 (rest[2] == 'r' || rest[2] == 'R')) 580 month = TT_MAR; 581 else if (month == TT_UNKNOWN && 582 (rest[1] == 'a' || rest[1] == 'A') && 583 (rest[2] == 'y' || rest[2] == 'Y')) 584 month = TT_MAY; 585 else if (zone == TT_UNKNOWN && 586 (rest[1] == 'd' || rest[1] == 'D') && 587 (rest[2] == 't' || rest[2] == 'T')) 588 zone = TT_MDT; 589 else if (zone == TT_UNKNOWN && 590 (rest[1] == 'e' || rest[1] == 'E') && 591 (rest[2] == 't' || rest[2] == 'T')) 592 zone = TT_MET; 593 else if (dotw == TT_UNKNOWN && 594 (rest[1] == 'o' || rest[1] == 'O') && 595 (rest[2] == 'n' || rest[2] == 'N')) 596 dotw = TT_MON; 597 else if (zone == TT_UNKNOWN && 598 (rest[1] == 's' || rest[1] == 'S') && 599 (rest[2] == 't' || rest[2] == 'T')) 600 zone = TT_MST; 601 break; 602 case 'n': case 'N': 603 if (month == TT_UNKNOWN && 604 (rest[1] == 'o' || rest[1] == 'O') && 605 (rest[2] == 'v' || rest[2] == 'V')) 606 month = TT_NOV; 607 else if (zone == TT_UNKNOWN && 608 (rest[1] == 's' || rest[1] == 'S') && 609 (rest[2] == 't' || rest[2] == 'T')) 610 zone = TT_NST; 611 break; 612 case 'o': case 'O': 613 if (month == TT_UNKNOWN && 614 (rest[1] == 'c' || rest[1] == 'C') && 615 (rest[2] == 't' || rest[2] == 'T')) 616 month = TT_OCT; 617 break; 618 case 'p': case 'P': 619 if (zone == TT_UNKNOWN && 620 (rest[1] == 'd' || rest[1] == 'D') && 621 (rest[2] == 't' || rest[2] == 'T')) 622 zone = TT_PDT; 623 else if (zone == TT_UNKNOWN && 624 (rest[1] == 's' || rest[1] == 'S') && 625 (rest[2] == 't' || rest[2] == 'T')) 626 zone = TT_PST; 627 break; 628 case 's': case 'S': 629 if (dotw == TT_UNKNOWN && 630 (rest[1] == 'a' || rest[1] == 'A') && 631 (rest[2] == 't' || rest[2] == 'T')) 632 dotw = TT_SAT; 633 else if (month == TT_UNKNOWN && 634 (rest[1] == 'e' || rest[1] == 'E') && 635 (rest[2] == 'p' || rest[2] == 'P')) 636 month = TT_SEP; 637 else if (dotw == TT_UNKNOWN && 638 (rest[1] == 'u' || rest[1] == 'U') && 639 (rest[2] == 'n' || rest[2] == 'N')) 640 dotw = TT_SUN; 641 break; 642 case 't': case 'T': 643 if (dotw == TT_UNKNOWN && 644 (rest[1] == 'h' || rest[1] == 'H') && 645 (rest[2] == 'u' || rest[2] == 'U')) 646 dotw = TT_THU; 647 else if (dotw == TT_UNKNOWN && 648 (rest[1] == 'u' || rest[1] == 'U') && 649 (rest[2] == 'e' || rest[2] == 'E')) 650 dotw = TT_TUE; 651 break; 652 case 'u': case 'U': 653 if (zone == TT_UNKNOWN && 654 (rest[1] == 't' || rest[1] == 'T') && 655 !(rest[2] >= 'A' && rest[2] <= 'Z') && 656 !(rest[2] >= 'a' && rest[2] <= 'z')) 657 /* UT is the same as GMT but UTx is not. */ 658 zone = TT_GMT; 659 break; 660 case 'w': case 'W': 661 if (dotw == TT_UNKNOWN && 662 (rest[1] == 'e' || rest[1] == 'E') && 663 (rest[2] == 'd' || rest[2] == 'D')) 664 dotw = TT_WED; 665 break; 666 667 case '+': case '-': 668 { 669 const char *end; 670 int sign; 671 if (zone_offset != -1) 672 { 673 /* already got one... */ 674 rest++; 675 break; 676 } 677 if (zone != TT_UNKNOWN && zone != TT_GMT) 678 { 679 /* GMT+0300 is legal, but PST+0300 is not. */ 680 rest++; 681 break; 682 } 683 684 sign = ((*rest == '+') ? 1 : -1); 685 rest++; /* move over sign */ 686 end = rest; 687 while (*end >= '0' && *end <= '9') 688 end++; 689 if (rest == end) /* no digits here */ 690 break; 691 692 if ((end - rest) == 4) 693 /* offset in HHMM */ 694 zone_offset = (((((rest[0]-'0')*10) + (rest[1]-'0')) * 60) + 695 (((rest[2]-'0')*10) + (rest[3]-'0'))); 696 else if ((end - rest) == 2) 697 /* offset in hours */ 698 zone_offset = (((rest[0]-'0')*10) + (rest[1]-'0')) * 60; 699 else if ((end - rest) == 1) 700 /* offset in hours */ 701 zone_offset = (rest[0]-'0') * 60; 702 else 703 /* 3 or >4 */ 704 break; 705 706 zone_offset *= sign; 707 zone = TT_GMT; 708 break; 709 } 710 711 case '0': case '1': case '2': case '3': case '4': 712 case '5': case '6': case '7': case '8': case '9': 713 { 714 int tmp_hour = -1; 715 int tmp_min = -1; 716 int tmp_sec = -1; 717 int tmp_usec = -1; 718 const char *end = rest + 1; 719 while (*end >= '0' && *end <= '9') 720 end++; 721 722 /* end is now the first character after a range of digits. */ 723 724 if (*end == ':') 725 { 726 if (hour >= 0 && min >= 0) /* already got it */ 727 break; 728 729 /* We have seen "[0-9]+:", so this is probably HH:MM[:SS] */ 730 if ((end - rest) > 2) 731 /* it is [0-9][0-9][0-9]+: */ 732 break; 733 else if ((end - rest) == 2) 734 tmp_hour = ((rest[0]-'0')*10 + 735 (rest[1]-'0')); 736 else 737 tmp_hour = (rest[0]-'0'); 738 739 /* move over the colon, and parse minutes */ 740 741 rest = ++end; 742 while (*end >= '0' && *end <= '9') 743 end++; 744 745 if (end == rest) 746 /* no digits after first colon? */ 747 break; 748 else if ((end - rest) > 2) 749 /* it is [0-9][0-9][0-9]+: */ 750 break; 751 else if ((end - rest) == 2) 752 tmp_min = ((rest[0]-'0')*10 + 753 (rest[1]-'0')); 754 else 755 tmp_min = (rest[0]-'0'); 756 757 /* now go for seconds */ 758 rest = end; 759 if (*rest == ':') 760 rest++; 761 end = rest; 762 while (*end >= '0' && *end <= '9') 763 end++; 764 765 if (end == rest) 766 /* no digits after second colon - that's ok. */ 767 ; 768 else if ((end - rest) > 2) 769 /* it is [0-9][0-9][0-9]+: */ 770 break; 771 else if ((end - rest) == 2) 772 tmp_sec = ((rest[0]-'0')*10 + 773 (rest[1]-'0')); 774 else 775 tmp_sec = (rest[0]-'0'); 776 777 /* fractional second */ 778 rest = end; 779 if (*rest == '.') 780 { 781 rest++; 782 end++; 783 tmp_usec = 0; 784 /* use up to 6 digits, skip over the rest */ 785 while (*end >= '0' && *end <= '9') 786 { 787 if (end - rest < 6) 788 tmp_usec = tmp_usec * 10 + *end - '0'; 789 end++; 790 } 791 int ndigits = end - rest; 792 while (ndigits++ < 6) 793 tmp_usec *= 10; 794 rest = end; 795 } 796 797 if (*rest == 'Z') 798 { 799 zone = TT_GMT; 800 rest++; 801 } 802 else if (tmp_hour <= 12) 803 { 804 /* If we made it here, we've parsed hour and min, 805 and possibly sec, so the current token is a time. 806 Now skip over whitespace and see if there's an AM 807 or PM directly following the time. 808 */ 809 const char *s = end; 810 while (*s && (*s == ' ' || *s == '\t')) 811 s++; 812 if ((s[0] == 'p' || s[0] == 'P') && 813 (s[1] == 'm' || s[1] == 'M')) 814 /* 10:05pm == 22:05, and 12:05pm == 12:05 */ 815 tmp_hour = (tmp_hour == 12 ? 12 : tmp_hour + 12); 816 else if (tmp_hour == 12 && 817 (s[0] == 'a' || s[0] == 'A') && 818 (s[1] == 'm' || s[1] == 'M')) 819 /* 12:05am == 00:05 */ 820 tmp_hour = 0; 821 } 822 823 hour = tmp_hour; 824 min = tmp_min; 825 sec = tmp_sec; 826 usec = tmp_usec; 827 rest = end; 828 break; 829 } 830 else if ((*end == '/' || *end == '-') && 831 end[1] >= '0' && end[1] <= '9') 832 { 833 /* Perhaps this is 6/16/95, 16/6/95, 6-16-95, or 16-6-95 834 or even 95-06-05 or 1995-06-22. 835 */ 836 int n1, n2, n3; 837 const char *s; 838 839 if (month != TT_UNKNOWN) 840 /* if we saw a month name, this can't be. */ 841 break; 842 843 s = rest; 844 845 n1 = (*s++ - '0'); /* first 1, 2 or 4 digits */ 846 if (*s >= '0' && *s <= '9') 847 { 848 n1 = n1*10 + (*s++ - '0'); 849 850 if (*s >= '0' && *s <= '9') /* optional digits 3 and 4 */ 851 { 852 n1 = n1*10 + (*s++ - '0'); 853 if (*s < '0' || *s > '9') 854 break; 855 n1 = n1*10 + (*s++ - '0'); 856 } 857 } 858 859 if (*s != '/' && *s != '-') /* slash */ 860 break; 861 s++; 862 863 if (*s < '0' || *s > '9') /* second 1 or 2 digits */ 864 break; 865 n2 = (*s++ - '0'); 866 if (*s >= '0' && *s <= '9') 867 n2 = n2*10 + (*s++ - '0'); 868 869 if (*s != '/' && *s != '-') /* slash */ 870 break; 871 s++; 872 873 if (*s < '0' || *s > '9') /* third 1, 2, 4, or 5 digits */ 874 break; 875 n3 = (*s++ - '0'); 876 if (*s >= '0' && *s <= '9') 877 n3 = n3*10 + (*s++ - '0'); 878 879 if (*s >= '0' && *s <= '9') /* optional digits 3, 4, and 5 */ 880 { 881 n3 = n3*10 + (*s++ - '0'); 882 if (*s < '0' || *s > '9') 883 break; 884 n3 = n3*10 + (*s++ - '0'); 885 if (*s >= '0' && *s <= '9') 886 n3 = n3*10 + (*s++ - '0'); 887 } 888 889 if (*s == 'T' && s[1] >= '0' && s[1] <= '9') 890 /* followed by ISO 8601 T delimiter and number is ok */ 891 ; 892 else if ((*s >= '0' && *s <= '9') || 893 (*s >= 'A' && *s <= 'Z') || 894 (*s >= 'a' && *s <= 'z')) 895 /* but other alphanumerics are not ok */ 896 break; 897 898 /* Ok, we parsed three multi-digit numbers, with / or - 899 between them. Now decide what the hell they are 900 (DD/MM/YY or MM/DD/YY or [YY]YY/MM/DD.) 901 */ 902 903 if (n1 > 31 || n1 == 0) /* must be [YY]YY/MM/DD */ 904 { 905 if (n2 > 12) break; 906 if (n3 > 31) break; 907 year = n1; 908 if (year < 70) 909 year += 2000; 910 else if (year < 100) 911 year += 1900; 912 month = (TIME_TOKEN)(n2 + ((int)TT_JAN) - 1); 913 date = n3; 914 rest = s; 915 break; 916 } 917 918 if (n1 > 12 && n2 > 12) /* illegal */ 919 { 920 rest = s; 921 break; 922 } 923 924 if (n3 < 70) 925 n3 += 2000; 926 else if (n3 < 100) 927 n3 += 1900; 928 929 if (n1 > 12) /* must be DD/MM/YY */ 930 { 931 date = n1; 932 month = (TIME_TOKEN)(n2 + ((int)TT_JAN) - 1); 933 year = n3; 934 } 935 else /* assume MM/DD/YY */ 936 { 937 /* #### In the ambiguous case, should we consult the 938 locale to find out the local default? */ 939 month = (TIME_TOKEN)(n1 + ((int)TT_JAN) - 1); 940 date = n2; 941 year = n3; 942 } 943 rest = s; 944 } 945 else if ((*end >= 'A' && *end <= 'Z') || 946 (*end >= 'a' && *end <= 'z')) 947 /* Digits followed by non-punctuation - what's that? */ 948 ; 949 else if ((end - rest) == 5) /* five digits is a year */ 950 year = (year < 0 951 ? ((rest[0]-'0')*10000L + 952 (rest[1]-'0')*1000L + 953 (rest[2]-'0')*100L + 954 (rest[3]-'0')*10L + 955 (rest[4]-'0')) 956 : year); 957 else if ((end - rest) == 4) /* four digits is a year */ 958 year = (year < 0 959 ? ((rest[0]-'0')*1000L + 960 (rest[1]-'0')*100L + 961 (rest[2]-'0')*10L + 962 (rest[3]-'0')) 963 : year); 964 else if ((end - rest) == 2) /* two digits - date or year */ 965 { 966 int n = ((rest[0]-'0')*10 + 967 (rest[1]-'0')); 968 /* If we don't have a date (day of the month) and we see a number 969 less than 32, then assume that is the date. 970 971 Otherwise, if we have a date and not a year, assume this is the 972 year. If it is less than 70, then assume it refers to the 21st 973 century. If it is two digits (>= 70), assume it refers to this 974 century. Otherwise, assume it refers to an unambiguous year. 975 976 The world will surely end soon. 977 */ 978 if (date < 0 && n < 32) 979 date = n; 980 else if (year < 0) 981 { 982 if (n < 70) 983 year = 2000 + n; 984 else if (n < 100) 985 year = 1900 + n; 986 else 987 year = n; 988 } 989 /* else what the hell is this. */ 990 } 991 else if ((end - rest) == 1) /* one digit - date */ 992 date = (date < 0 ? (rest[0]-'0') : date); 993 /* else, three or more than five digits - what's that? */ 994 995 break; 996 } /* case '0' .. '9' */ 997 } /* switch */ 998 999 /* Skip to the end of this token, whether we parsed it or not. 1000 Tokens are delimited by whitespace, or ,;-+/()[] but explicitly not .: 1001 'T' is also treated as delimiter when followed by a digit (ISO 8601). 1002 */ 1003 while (*rest && 1004 *rest != ' ' && *rest != '\t' && 1005 *rest != ',' && *rest != ';' && 1006 *rest != '-' && *rest != '+' && 1007 *rest != '/' && 1008 *rest != '(' && *rest != ')' && *rest != '[' && *rest != ']' && 1009 !(*rest == 'T' && rest[1] >= '0' && rest[1] <= '9') 1010 ) 1011 rest++; 1012 /* skip over uninteresting chars. */ 1013 SKIP_MORE: 1014 while (*rest == ' ' || *rest == '\t' || 1015 *rest == ',' || *rest == ';' || *rest == '/' || 1016 *rest == '(' || *rest == ')' || *rest == '[' || *rest == ']') 1017 rest++; 1018 1019 /* "-" is ignored at the beginning of a token if we have not yet 1020 parsed a year (e.g., the second "-" in "30-AUG-1966"), or if 1021 the character after the dash is not a digit. */ 1022 if (*rest == '-' && ((rest > string && 1023 isalpha((unsigned char)rest[-1]) && year < 0) || 1024 rest[1] < '0' || rest[1] > '9')) 1025 { 1026 rest++; 1027 goto SKIP_MORE; 1028 } 1029 1030 /* Skip T that may precede ISO 8601 time. */ 1031 if (*rest == 'T' && rest[1] >= '0' && rest[1] <= '9') 1032 rest++; 1033 } /* while */ 1034 1035 if (zone != TT_UNKNOWN && zone_offset == -1) 1036 { 1037 switch (zone) 1038 { 1039 case TT_PST: zone_offset = -8 * 60; break; 1040 case TT_PDT: zone_offset = -8 * 60; dst_offset = 1 * 60; break; 1041 case TT_MST: zone_offset = -7 * 60; break; 1042 case TT_MDT: zone_offset = -7 * 60; dst_offset = 1 * 60; break; 1043 case TT_CST: zone_offset = -6 * 60; break; 1044 case TT_CDT: zone_offset = -6 * 60; dst_offset = 1 * 60; break; 1045 case TT_EST: zone_offset = -5 * 60; break; 1046 case TT_EDT: zone_offset = -5 * 60; dst_offset = 1 * 60; break; 1047 case TT_AST: zone_offset = -4 * 60; break; 1048 case TT_NST: zone_offset = -3 * 60 - 30; break; 1049 case TT_GMT: zone_offset = 0 * 60; break; 1050 case TT_BST: zone_offset = 0 * 60; dst_offset = 1 * 60; break; 1051 case TT_MET: zone_offset = 1 * 60; break; 1052 case TT_EET: zone_offset = 2 * 60; break; 1053 case TT_JST: zone_offset = 9 * 60; break; 1054 default: 1055 PR_ASSERT (0); 1056 break; 1057 } 1058 } 1059 1060 /* If we didn't find a year, month, or day-of-the-month, we can't 1061 possibly parse this, and in fact, mktime() will do something random 1062 (I'm seeing it return "Tue Feb 5 06:28:16 2036", which is no doubt 1063 a numerologically significant date... */ 1064 if (month == TT_UNKNOWN || date == -1 || year == -1 || year > PR_INT16_MAX) 1065 return PR_FAILURE; 1066 1067 memset(result, 0, sizeof(*result)); 1068 if (usec != -1) 1069 result->tm_usec = usec; 1070 if (sec != -1) 1071 result->tm_sec = sec; 1072 if (min != -1) 1073 result->tm_min = min; 1074 if (hour != -1) 1075 result->tm_hour = hour; 1076 if (date != -1) 1077 result->tm_mday = date; 1078 if (month != TT_UNKNOWN) 1079 result->tm_month = (((int)month) - ((int)TT_JAN)); 1080 if (year != -1) 1081 result->tm_year = static_cast<PRInt16>(year); 1082 if (dotw != TT_UNKNOWN) 1083 result->tm_wday = static_cast<PRInt8>(((int)dotw) - ((int)TT_SUN)); 1084 /* 1085 * Mainly to compute wday and yday, but normalized time is also required 1086 * by the check below that works around a Visual C++ 2005 mktime problem. 1087 */ 1088 PR_NormalizeTime(result, PR_GMTParameters); 1089 /* The remaining work is to set the gmt and dst offsets in tm_params. */ 1090 1091 if (zone == TT_UNKNOWN && default_to_gmt) 1092 { 1093 /* No zone was specified, so pretend the zone was GMT. */ 1094 zone = TT_GMT; 1095 zone_offset = 0; 1096 } 1097 1098 if (zone_offset == -1) 1099 { 1100 /* no zone was specified, and we're to assume that everything 1101 is local. */ 1102 struct tm localTime; 1103 time_t secs; 1104 1105 PR_ASSERT(result->tm_month > -1 && 1106 result->tm_mday > 0 && 1107 result->tm_hour > -1 && 1108 result->tm_min > -1 && 1109 result->tm_sec > -1); 1110 1111 /* 1112 * To obtain time_t from a tm structure representing the local 1113 * time, we call mktime(). However, we need to see if we are 1114 * on 1-Jan-1970 or before. If we are, we can't call mktime() 1115 * because mktime() will crash on win16. In that case, we 1116 * calculate zone_offset based on the zone offset at 1117 * 00:00:00, 2 Jan 1970 GMT, and subtract zone_offset from the 1118 * date we are parsing to transform the date to GMT. We also 1119 * do so if mktime() returns (time_t) -1 (time out of range). 1120 */ 1121 1122 /* month, day, hours, mins and secs are always non-negative 1123 so we dont need to worry about them. */ 1124 if (result->tm_year >= 1970) 1125 { 1126 localTime.tm_sec = result->tm_sec; 1127 localTime.tm_min = result->tm_min; 1128 localTime.tm_hour = result->tm_hour; 1129 localTime.tm_mday = result->tm_mday; 1130 localTime.tm_mon = result->tm_month; 1131 localTime.tm_year = result->tm_year - 1900; 1132 /* Set this to -1 to tell mktime "I don't care". If you set 1133 it to 0 or 1, you are making assertions about whether the 1134 date you are handing it is in daylight savings mode or not; 1135 and if you're wrong, it will "fix" it for you. */ 1136 localTime.tm_isdst = -1; 1137 1138 #if _MSC_VER == 1400 /* 1400 = Visual C++ 2005 (8.0) */ 1139 /* 1140 * mktime will return (time_t) -1 if the input is a date 1141 * after 23:59:59, December 31, 3000, US Pacific Time (not 1142 * UTC as documented): 1143 * http://msdn.microsoft.com/en-us/library/d1y53h2a(VS.80).aspx 1144 * But if the year is 3001, mktime also invokes the invalid 1145 * parameter handler, causing the application to crash. This 1146 * problem has been reported in 1147 * http://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=266036. 1148 * We avoid this crash by not calling mktime if the date is 1149 * out of range. To use a simple test that works in any time 1150 * zone, we consider year 3000 out of range as well. (See 1151 * bug 480740.) 1152 */ 1153 if (result->tm_year >= 3000) { 1154 /* Emulate what mktime would have done. */ 1155 errno = EINVAL; 1156 secs = (time_t) -1; 1157 } else { 1158 secs = mktime(&localTime); 1159 } 1160 #else 1161 secs = mktime(&localTime); 1162 #endif 1163 if (secs != (time_t) -1) 1164 { 1165 *result_imploded = (PRInt64)secs * PR_USEC_PER_SEC; 1166 *result_imploded += result->tm_usec; 1167 return PR_SUCCESS; 1168 } 1169 } 1170 1171 /* So mktime() can't handle this case. We assume the 1172 zone_offset for the date we are parsing is the same as 1173 the zone offset on 00:00:00 2 Jan 1970 GMT. */ 1174 secs = 86400; 1175 localtime_r(&secs, &localTime); 1176 zone_offset = localTime.tm_min 1177 + 60 * localTime.tm_hour 1178 + 1440 * (localTime.tm_mday - 2); 1179 } 1180 1181 result->tm_params.tp_gmt_offset = zone_offset * 60; 1182 result->tm_params.tp_dst_offset = dst_offset * 60; 1183 1184 *result_imploded = PR_ImplodeTime(result); 1185 return PR_SUCCESS; 1186 } 1187