1 /* 2 * Overview: 3 * This is the generic MTD driver for NAND flash devices. It should be 4 * capable of working with almost all NAND chips currently available. 5 * 6 * Additional technical information is available on 7 * http://www.linux-mtd.infradead.org/doc/nand.html 8 * 9 * Copyright (C) 2000 Steven J. Hill (sjhill (at) realitydiluted.com) 10 * 2002-2006 Thomas Gleixner (tglx (at) linutronix.de) 11 * 12 * Credits: 13 * David Woodhouse for adding multichip support 14 * 15 * Aleph One Ltd. and Toby Churchill Ltd. for supporting the 16 * rework for 2K page size chips 17 * 18 * TODO: 19 * Enable cached programming for 2k page size chips 20 * Check, if mtd->ecctype should be set to MTD_ECC_HW 21 * if we have HW ECC support. 22 * BBT table is not serialized, has to be fixed 23 * 24 * This program is free software; you can redistribute it and/or modify 25 * it under the terms of the GNU General Public License version 2 as 26 * published by the Free Software Foundation. 27 * 28 */ 29 30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 31 #include <common.h> 32 #if CONFIG_IS_ENABLED(OF_CONTROL) 33 #include <fdtdec.h> 34 #endif 35 #include <malloc.h> 36 #include <watchdog.h> 37 #include <linux/err.h> 38 #include <linux/compat.h> 39 #include <linux/mtd/mtd.h> 40 #include <linux/mtd/rawnand.h> 41 #include <linux/mtd/nand_ecc.h> 42 #include <linux/mtd/nand_bch.h> 43 #ifdef CONFIG_MTD_PARTITIONS 44 #include <linux/mtd/partitions.h> 45 #endif 46 #include <asm/io.h> 47 #include <linux/errno.h> 48 49 /* Define default oob placement schemes for large and small page devices */ 50 static struct nand_ecclayout nand_oob_8 = { 51 .eccbytes = 3, 52 .eccpos = {0, 1, 2}, 53 .oobfree = { 54 {.offset = 3, 55 .length = 2}, 56 {.offset = 6, 57 .length = 2} } 58 }; 59 60 static struct nand_ecclayout nand_oob_16 = { 61 .eccbytes = 6, 62 .eccpos = {0, 1, 2, 3, 6, 7}, 63 .oobfree = { 64 {.offset = 8, 65 . length = 8} } 66 }; 67 68 static struct nand_ecclayout nand_oob_64 = { 69 .eccbytes = 24, 70 .eccpos = { 71 40, 41, 42, 43, 44, 45, 46, 47, 72 48, 49, 50, 51, 52, 53, 54, 55, 73 56, 57, 58, 59, 60, 61, 62, 63}, 74 .oobfree = { 75 {.offset = 2, 76 .length = 38} } 77 }; 78 79 static struct nand_ecclayout nand_oob_128 = { 80 .eccbytes = 48, 81 .eccpos = { 82 80, 81, 82, 83, 84, 85, 86, 87, 83 88, 89, 90, 91, 92, 93, 94, 95, 84 96, 97, 98, 99, 100, 101, 102, 103, 85 104, 105, 106, 107, 108, 109, 110, 111, 86 112, 113, 114, 115, 116, 117, 118, 119, 87 120, 121, 122, 123, 124, 125, 126, 127}, 88 .oobfree = { 89 {.offset = 2, 90 .length = 78} } 91 }; 92 93 static int nand_get_device(struct mtd_info *mtd, int new_state); 94 95 static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, 96 struct mtd_oob_ops *ops); 97 98 /* 99 * For devices which display every fart in the system on a separate LED. Is 100 * compiled away when LED support is disabled. 101 */ 102 DEFINE_LED_TRIGGER(nand_led_trigger); 103 104 static int check_offs_len(struct mtd_info *mtd, 105 loff_t ofs, uint64_t len) 106 { 107 struct nand_chip *chip = mtd_to_nand(mtd); 108 int ret = 0; 109 110 /* Start address must align on block boundary */ 111 if (ofs & ((1ULL << chip->phys_erase_shift) - 1)) { 112 pr_debug("%s: unaligned address\n", __func__); 113 ret = -EINVAL; 114 } 115 116 /* Length must align on block boundary */ 117 if (len & ((1ULL << chip->phys_erase_shift) - 1)) { 118 pr_debug("%s: length not block aligned\n", __func__); 119 ret = -EINVAL; 120 } 121 122 return ret; 123 } 124 125 /** 126 * nand_release_device - [GENERIC] release chip 127 * @mtd: MTD device structure 128 * 129 * Release chip lock and wake up anyone waiting on the device. 130 */ 131 static void nand_release_device(struct mtd_info *mtd) 132 { 133 struct nand_chip *chip = mtd_to_nand(mtd); 134 135 /* De-select the NAND device */ 136 chip->select_chip(mtd, -1); 137 } 138 139 /** 140 * nand_read_byte - [DEFAULT] read one byte from the chip 141 * @mtd: MTD device structure 142 * 143 * Default read function for 8bit buswidth 144 */ 145 uint8_t nand_read_byte(struct mtd_info *mtd) 146 { 147 struct nand_chip *chip = mtd_to_nand(mtd); 148 return readb(chip->IO_ADDR_R); 149 } 150 151 /** 152 * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip 153 * @mtd: MTD device structure 154 * 155 * Default read function for 16bit buswidth with endianness conversion. 156 * 157 */ 158 static uint8_t nand_read_byte16(struct mtd_info *mtd) 159 { 160 struct nand_chip *chip = mtd_to_nand(mtd); 161 return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R)); 162 } 163 164 /** 165 * nand_read_word - [DEFAULT] read one word from the chip 166 * @mtd: MTD device structure 167 * 168 * Default read function for 16bit buswidth without endianness conversion. 169 */ 170 static u16 nand_read_word(struct mtd_info *mtd) 171 { 172 struct nand_chip *chip = mtd_to_nand(mtd); 173 return readw(chip->IO_ADDR_R); 174 } 175 176 /** 177 * nand_select_chip - [DEFAULT] control CE line 178 * @mtd: MTD device structure 179 * @chipnr: chipnumber to select, -1 for deselect 180 * 181 * Default select function for 1 chip devices. 182 */ 183 static void nand_select_chip(struct mtd_info *mtd, int chipnr) 184 { 185 struct nand_chip *chip = mtd_to_nand(mtd); 186 187 switch (chipnr) { 188 case -1: 189 chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE); 190 break; 191 case 0: 192 break; 193 194 default: 195 BUG(); 196 } 197 } 198 199 /** 200 * nand_write_byte - [DEFAULT] write single byte to chip 201 * @mtd: MTD device structure 202 * @byte: value to write 203 * 204 * Default function to write a byte to I/O[7:0] 205 */ 206 static void nand_write_byte(struct mtd_info *mtd, uint8_t byte) 207 { 208 struct nand_chip *chip = mtd_to_nand(mtd); 209 210 chip->write_buf(mtd, &byte, 1); 211 } 212 213 /** 214 * nand_write_byte16 - [DEFAULT] write single byte to a chip with width 16 215 * @mtd: MTD device structure 216 * @byte: value to write 217 * 218 * Default function to write a byte to I/O[7:0] on a 16-bit wide chip. 219 */ 220 static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte) 221 { 222 struct nand_chip *chip = mtd_to_nand(mtd); 223 uint16_t word = byte; 224 225 /* 226 * It's not entirely clear what should happen to I/O[15:8] when writing 227 * a byte. The ONFi spec (Revision 3.1; 2012-09-19, Section 2.16) reads: 228 * 229 * When the host supports a 16-bit bus width, only data is 230 * transferred at the 16-bit width. All address and command line 231 * transfers shall use only the lower 8-bits of the data bus. During 232 * command transfers, the host may place any value on the upper 233 * 8-bits of the data bus. During address transfers, the host shall 234 * set the upper 8-bits of the data bus to 00h. 235 * 236 * One user of the write_byte callback is nand_onfi_set_features. The 237 * four parameters are specified to be written to I/O[7:0], but this is 238 * neither an address nor a command transfer. Let's assume a 0 on the 239 * upper I/O lines is OK. 240 */ 241 chip->write_buf(mtd, (uint8_t *)&word, 2); 242 } 243 244 static void iowrite8_rep(void *addr, const uint8_t *buf, int len) 245 { 246 int i; 247 248 for (i = 0; i < len; i++) 249 writeb(buf[i], addr); 250 } 251 static void ioread8_rep(void *addr, uint8_t *buf, int len) 252 { 253 int i; 254 255 for (i = 0; i < len; i++) 256 buf[i] = readb(addr); 257 } 258 259 static void ioread16_rep(void *addr, void *buf, int len) 260 { 261 int i; 262 u16 *p = (u16 *) buf; 263 264 for (i = 0; i < len; i++) 265 p[i] = readw(addr); 266 } 267 268 static void iowrite16_rep(void *addr, void *buf, int len) 269 { 270 int i; 271 u16 *p = (u16 *) buf; 272 273 for (i = 0; i < len; i++) 274 writew(p[i], addr); 275 } 276 277 /** 278 * nand_write_buf - [DEFAULT] write buffer to chip 279 * @mtd: MTD device structure 280 * @buf: data buffer 281 * @len: number of bytes to write 282 * 283 * Default write function for 8bit buswidth. 284 */ 285 void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) 286 { 287 struct nand_chip *chip = mtd_to_nand(mtd); 288 289 iowrite8_rep(chip->IO_ADDR_W, buf, len); 290 } 291 292 /** 293 * nand_read_buf - [DEFAULT] read chip data into buffer 294 * @mtd: MTD device structure 295 * @buf: buffer to store date 296 * @len: number of bytes to read 297 * 298 * Default read function for 8bit buswidth. 299 */ 300 void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) 301 { 302 struct nand_chip *chip = mtd_to_nand(mtd); 303 304 ioread8_rep(chip->IO_ADDR_R, buf, len); 305 } 306 307 /** 308 * nand_write_buf16 - [DEFAULT] write buffer to chip 309 * @mtd: MTD device structure 310 * @buf: data buffer 311 * @len: number of bytes to write 312 * 313 * Default write function for 16bit buswidth. 314 */ 315 void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) 316 { 317 struct nand_chip *chip = mtd_to_nand(mtd); 318 u16 *p = (u16 *) buf; 319 320 iowrite16_rep(chip->IO_ADDR_W, p, len >> 1); 321 } 322 323 /** 324 * nand_read_buf16 - [DEFAULT] read chip data into buffer 325 * @mtd: MTD device structure 326 * @buf: buffer to store date 327 * @len: number of bytes to read 328 * 329 * Default read function for 16bit buswidth. 330 */ 331 void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) 332 { 333 struct nand_chip *chip = mtd_to_nand(mtd); 334 u16 *p = (u16 *) buf; 335 336 ioread16_rep(chip->IO_ADDR_R, p, len >> 1); 337 } 338 339 /** 340 * nand_block_bad - [DEFAULT] Read bad block marker from the chip 341 * @mtd: MTD device structure 342 * @ofs: offset from device start 343 * 344 * Check, if the block is bad. 345 */ 346 static int nand_block_bad(struct mtd_info *mtd, loff_t ofs) 347 { 348 int page, res = 0, i = 0; 349 struct nand_chip *chip = mtd_to_nand(mtd); 350 u16 bad; 351 352 if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) 353 ofs += mtd->erasesize - mtd->writesize; 354 355 page = (int)(ofs >> chip->page_shift) & chip->pagemask; 356 357 do { 358 if (chip->options & NAND_BUSWIDTH_16) { 359 chip->cmdfunc(mtd, NAND_CMD_READOOB, 360 chip->badblockpos & 0xFE, page); 361 bad = cpu_to_le16(chip->read_word(mtd)); 362 if (chip->badblockpos & 0x1) 363 bad >>= 8; 364 else 365 bad &= 0xFF; 366 } else { 367 chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, 368 page); 369 bad = chip->read_byte(mtd); 370 } 371 372 if (likely(chip->badblockbits == 8)) 373 res = bad != 0xFF; 374 else 375 res = hweight8(bad) < chip->badblockbits; 376 ofs += mtd->writesize; 377 page = (int)(ofs >> chip->page_shift) & chip->pagemask; 378 i++; 379 } while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE)); 380 381 return res; 382 } 383 384 /** 385 * nand_default_block_markbad - [DEFAULT] mark a block bad via bad block marker 386 * @mtd: MTD device structure 387 * @ofs: offset from device start 388 * 389 * This is the default implementation, which can be overridden by a hardware 390 * specific driver. It provides the details for writing a bad block marker to a 391 * block. 392 */ 393 static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) 394 { 395 struct nand_chip *chip = mtd_to_nand(mtd); 396 struct mtd_oob_ops ops; 397 uint8_t buf[2] = { 0, 0 }; 398 int ret = 0, res, i = 0; 399 400 memset(&ops, 0, sizeof(ops)); 401 ops.oobbuf = buf; 402 ops.ooboffs = chip->badblockpos; 403 if (chip->options & NAND_BUSWIDTH_16) { 404 ops.ooboffs &= ~0x01; 405 ops.len = ops.ooblen = 2; 406 } else { 407 ops.len = ops.ooblen = 1; 408 } 409 ops.mode = MTD_OPS_PLACE_OOB; 410 411 /* Write to first/last page(s) if necessary */ 412 if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) 413 ofs += mtd->erasesize - mtd->writesize; 414 do { 415 res = nand_do_write_oob(mtd, ofs, &ops); 416 if (!ret) 417 ret = res; 418 419 i++; 420 ofs += mtd->writesize; 421 } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2); 422 423 return ret; 424 } 425 426 /** 427 * nand_block_markbad_lowlevel - mark a block bad 428 * @mtd: MTD device structure 429 * @ofs: offset from device start 430 * 431 * This function performs the generic NAND bad block marking steps (i.e., bad 432 * block table(s) and/or marker(s)). We only allow the hardware driver to 433 * specify how to write bad block markers to OOB (chip->block_markbad). 434 * 435 * We try operations in the following order: 436 * (1) erase the affected block, to allow OOB marker to be written cleanly 437 * (2) write bad block marker to OOB area of affected block (unless flag 438 * NAND_BBT_NO_OOB_BBM is present) 439 * (3) update the BBT 440 * Note that we retain the first error encountered in (2) or (3), finish the 441 * procedures, and dump the error in the end. 442 */ 443 static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) 444 { 445 struct nand_chip *chip = mtd_to_nand(mtd); 446 int res, ret = 0; 447 448 if (!(chip->bbt_options & NAND_BBT_NO_OOB_BBM)) { 449 struct erase_info einfo; 450 451 /* Attempt erase before marking OOB */ 452 memset(&einfo, 0, sizeof(einfo)); 453 einfo.mtd = mtd; 454 einfo.addr = ofs; 455 einfo.len = 1ULL << chip->phys_erase_shift; 456 nand_erase_nand(mtd, &einfo, 0); 457 458 /* Write bad block marker to OOB */ 459 nand_get_device(mtd, FL_WRITING); 460 ret = chip->block_markbad(mtd, ofs); 461 nand_release_device(mtd); 462 } 463 464 /* Mark block bad in BBT */ 465 if (chip->bbt) { 466 res = nand_markbad_bbt(mtd, ofs); 467 if (!ret) 468 ret = res; 469 } 470 471 if (!ret) 472 mtd->ecc_stats.badblocks++; 473 474 return ret; 475 } 476 477 /** 478 * nand_check_wp - [GENERIC] check if the chip is write protected 479 * @mtd: MTD device structure 480 * 481 * Check, if the device is write protected. The function expects, that the 482 * device is already selected. 483 */ 484 static int nand_check_wp(struct mtd_info *mtd) 485 { 486 struct nand_chip *chip = mtd_to_nand(mtd); 487 488 /* Broken xD cards report WP despite being writable */ 489 if (chip->options & NAND_BROKEN_XD) 490 return 0; 491 492 /* Check the WP bit */ 493 chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); 494 return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; 495 } 496 497 /** 498 * nand_block_isreserved - [GENERIC] Check if a block is marked reserved. 499 * @mtd: MTD device structure 500 * @ofs: offset from device start 501 * 502 * Check if the block is marked as reserved. 503 */ 504 static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs) 505 { 506 struct nand_chip *chip = mtd_to_nand(mtd); 507 508 if (!chip->bbt) 509 return 0; 510 /* Return info from the table */ 511 return nand_isreserved_bbt(mtd, ofs); 512 } 513 514 /** 515 * nand_block_checkbad - [GENERIC] Check if a block is marked bad 516 * @mtd: MTD device structure 517 * @ofs: offset from device start 518 * @allowbbt: 1, if its allowed to access the bbt area 519 * 520 * Check, if the block is bad. Either by reading the bad block table or 521 * calling of the scan function. 522 */ 523 static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt) 524 { 525 struct nand_chip *chip = mtd_to_nand(mtd); 526 527 if (!(chip->options & NAND_SKIP_BBTSCAN) && 528 !(chip->options & NAND_BBT_SCANNED)) { 529 chip->options |= NAND_BBT_SCANNED; 530 chip->scan_bbt(mtd); 531 } 532 533 if (!chip->bbt) 534 return chip->block_bad(mtd, ofs); 535 536 /* Return info from the table */ 537 return nand_isbad_bbt(mtd, ofs, allowbbt); 538 } 539 540 /** 541 * nand_wait_ready - [GENERIC] Wait for the ready pin after commands. 542 * @mtd: MTD device structure 543 * 544 * Wait for the ready pin after a command, and warn if a timeout occurs. 545 */ 546 void nand_wait_ready(struct mtd_info *mtd) 547 { 548 struct nand_chip *chip = mtd_to_nand(mtd); 549 u32 timeo = (CONFIG_SYS_HZ * 400) / 1000; 550 u32 time_start; 551 552 time_start = get_timer(0); 553 /* Wait until command is processed or timeout occurs */ 554 while (get_timer(time_start) < timeo) { 555 if (chip->dev_ready) 556 if (chip->dev_ready(mtd)) 557 break; 558 } 559 560 if (!chip->dev_ready(mtd)) 561 pr_warn("timeout while waiting for chip to become ready\n"); 562 } 563 EXPORT_SYMBOL_GPL(nand_wait_ready); 564 565 /** 566 * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands. 567 * @mtd: MTD device structure 568 * @timeo: Timeout in ms 569 * 570 * Wait for status ready (i.e. command done) or timeout. 571 */ 572 static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo) 573 { 574 register struct nand_chip *chip = mtd_to_nand(mtd); 575 u32 time_start; 576 577 timeo = (CONFIG_SYS_HZ * timeo) / 1000; 578 time_start = get_timer(0); 579 while (get_timer(time_start) < timeo) { 580 if ((chip->read_byte(mtd) & NAND_STATUS_READY)) 581 break; 582 WATCHDOG_RESET(); 583 } 584 }; 585 586 /** 587 * nand_command - [DEFAULT] Send command to NAND device 588 * @mtd: MTD device structure 589 * @command: the command to be sent 590 * @column: the column address for this command, -1 if none 591 * @page_addr: the page address for this command, -1 if none 592 * 593 * Send command to NAND device. This function is used for small page devices 594 * (512 Bytes per page). 595 */ 596 static void nand_command(struct mtd_info *mtd, unsigned int command, 597 int column, int page_addr) 598 { 599 register struct nand_chip *chip = mtd_to_nand(mtd); 600 int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; 601 602 /* Write out the command to the device */ 603 if (command == NAND_CMD_SEQIN) { 604 int readcmd; 605 606 if (column >= mtd->writesize) { 607 /* OOB area */ 608 column -= mtd->writesize; 609 readcmd = NAND_CMD_READOOB; 610 } else if (column < 256) { 611 /* First 256 bytes --> READ0 */ 612 readcmd = NAND_CMD_READ0; 613 } else { 614 column -= 256; 615 readcmd = NAND_CMD_READ1; 616 } 617 chip->cmd_ctrl(mtd, readcmd, ctrl); 618 ctrl &= ~NAND_CTRL_CHANGE; 619 } 620 chip->cmd_ctrl(mtd, command, ctrl); 621 622 /* Address cycle, when necessary */ 623 ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE; 624 /* Serially input address */ 625 if (column != -1) { 626 /* Adjust columns for 16 bit buswidth */ 627 if (chip->options & NAND_BUSWIDTH_16 && 628 !nand_opcode_8bits(command)) 629 column >>= 1; 630 chip->cmd_ctrl(mtd, column, ctrl); 631 ctrl &= ~NAND_CTRL_CHANGE; 632 } 633 if (page_addr != -1) { 634 chip->cmd_ctrl(mtd, page_addr, ctrl); 635 ctrl &= ~NAND_CTRL_CHANGE; 636 chip->cmd_ctrl(mtd, page_addr >> 8, ctrl); 637 if (chip->options & NAND_ROW_ADDR_3) 638 chip->cmd_ctrl(mtd, page_addr >> 16, ctrl); 639 } 640 chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); 641 642 /* 643 * Program and erase have their own busy handlers status and sequential 644 * in needs no delay 645 */ 646 switch (command) { 647 648 case NAND_CMD_PAGEPROG: 649 case NAND_CMD_ERASE1: 650 case NAND_CMD_ERASE2: 651 case NAND_CMD_SEQIN: 652 case NAND_CMD_STATUS: 653 case NAND_CMD_READID: 654 case NAND_CMD_SET_FEATURES: 655 return; 656 657 case NAND_CMD_RESET: 658 if (chip->dev_ready) 659 break; 660 udelay(chip->chip_delay); 661 chip->cmd_ctrl(mtd, NAND_CMD_STATUS, 662 NAND_CTRL_CLE | NAND_CTRL_CHANGE); 663 chip->cmd_ctrl(mtd, 664 NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); 665 /* EZ-NAND can take upto 250ms as per ONFi v4.0 */ 666 nand_wait_status_ready(mtd, 250); 667 return; 668 669 /* This applies to read commands */ 670 default: 671 /* 672 * If we don't have access to the busy pin, we apply the given 673 * command delay 674 */ 675 if (!chip->dev_ready) { 676 udelay(chip->chip_delay); 677 return; 678 } 679 } 680 /* 681 * Apply this short delay always to ensure that we do wait tWB in 682 * any case on any machine. 683 */ 684 ndelay(100); 685 686 nand_wait_ready(mtd); 687 } 688 689 /** 690 * nand_command_lp - [DEFAULT] Send command to NAND large page device 691 * @mtd: MTD device structure 692 * @command: the command to be sent 693 * @column: the column address for this command, -1 if none 694 * @page_addr: the page address for this command, -1 if none 695 * 696 * Send command to NAND device. This is the version for the new large page 697 * devices. We don't have the separate regions as we have in the small page 698 * devices. We must emulate NAND_CMD_READOOB to keep the code compatible. 699 */ 700 static void nand_command_lp(struct mtd_info *mtd, unsigned int command, 701 int column, int page_addr) 702 { 703 register struct nand_chip *chip = mtd_to_nand(mtd); 704 705 /* Emulate NAND_CMD_READOOB */ 706 if (command == NAND_CMD_READOOB) { 707 column += mtd->writesize; 708 command = NAND_CMD_READ0; 709 } 710 711 /* Command latch cycle */ 712 chip->cmd_ctrl(mtd, command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); 713 714 if (column != -1 || page_addr != -1) { 715 int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE; 716 717 /* Serially input address */ 718 if (column != -1) { 719 /* Adjust columns for 16 bit buswidth */ 720 if (chip->options & NAND_BUSWIDTH_16 && 721 !nand_opcode_8bits(command)) 722 column >>= 1; 723 chip->cmd_ctrl(mtd, column, ctrl); 724 ctrl &= ~NAND_CTRL_CHANGE; 725 chip->cmd_ctrl(mtd, column >> 8, ctrl); 726 } 727 if (page_addr != -1) { 728 chip->cmd_ctrl(mtd, page_addr, ctrl); 729 chip->cmd_ctrl(mtd, page_addr >> 8, 730 NAND_NCE | NAND_ALE); 731 if (chip->options & NAND_ROW_ADDR_3) 732 chip->cmd_ctrl(mtd, page_addr >> 16, 733 NAND_NCE | NAND_ALE); 734 } 735 } 736 chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); 737 738 /* 739 * Program and erase have their own busy handlers status, sequential 740 * in and status need no delay. 741 */ 742 switch (command) { 743 744 case NAND_CMD_CACHEDPROG: 745 case NAND_CMD_PAGEPROG: 746 case NAND_CMD_ERASE1: 747 case NAND_CMD_ERASE2: 748 case NAND_CMD_SEQIN: 749 case NAND_CMD_RNDIN: 750 case NAND_CMD_STATUS: 751 case NAND_CMD_READID: 752 case NAND_CMD_SET_FEATURES: 753 return; 754 755 case NAND_CMD_RESET: 756 if (chip->dev_ready) 757 break; 758 udelay(chip->chip_delay); 759 chip->cmd_ctrl(mtd, NAND_CMD_STATUS, 760 NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); 761 chip->cmd_ctrl(mtd, NAND_CMD_NONE, 762 NAND_NCE | NAND_CTRL_CHANGE); 763 /* EZ-NAND can take upto 250ms as per ONFi v4.0 */ 764 nand_wait_status_ready(mtd, 250); 765 return; 766 767 case NAND_CMD_RNDOUT: 768 /* No ready / busy check necessary */ 769 chip->cmd_ctrl(mtd, NAND_CMD_RNDOUTSTART, 770 NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); 771 chip->cmd_ctrl(mtd, NAND_CMD_NONE, 772 NAND_NCE | NAND_CTRL_CHANGE); 773 return; 774 775 case NAND_CMD_READ0: 776 chip->cmd_ctrl(mtd, NAND_CMD_READSTART, 777 NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); 778 chip->cmd_ctrl(mtd, NAND_CMD_NONE, 779 NAND_NCE | NAND_CTRL_CHANGE); 780 781 /* This applies to read commands */ 782 default: 783 /* 784 * If we don't have access to the busy pin, we apply the given 785 * command delay. 786 */ 787 if (!chip->dev_ready) { 788 udelay(chip->chip_delay); 789 return; 790 } 791 } 792 793 /* 794 * Apply this short delay always to ensure that we do wait tWB in 795 * any case on any machine. 796 */ 797 ndelay(100); 798 799 nand_wait_ready(mtd); 800 } 801 802 /** 803 * panic_nand_get_device - [GENERIC] Get chip for selected access 804 * @chip: the nand chip descriptor 805 * @mtd: MTD device structure 806 * @new_state: the state which is requested 807 * 808 * Used when in panic, no locks are taken. 809 */ 810 static void panic_nand_get_device(struct nand_chip *chip, 811 struct mtd_info *mtd, int new_state) 812 { 813 /* Hardware controller shared among independent devices */ 814 chip->controller->active = chip; 815 chip->state = new_state; 816 } 817 818 /** 819 * nand_get_device - [GENERIC] Get chip for selected access 820 * @mtd: MTD device structure 821 * @new_state: the state which is requested 822 * 823 * Get the device and lock it for exclusive access 824 */ 825 static int 826 nand_get_device(struct mtd_info *mtd, int new_state) 827 { 828 struct nand_chip *chip = mtd_to_nand(mtd); 829 chip->state = new_state; 830 return 0; 831 } 832 833 /** 834 * panic_nand_wait - [GENERIC] wait until the command is done 835 * @mtd: MTD device structure 836 * @chip: NAND chip structure 837 * @timeo: timeout 838 * 839 * Wait for command done. This is a helper function for nand_wait used when 840 * we are in interrupt context. May happen when in panic and trying to write 841 * an oops through mtdoops. 842 */ 843 static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip, 844 unsigned long timeo) 845 { 846 int i; 847 for (i = 0; i < timeo; i++) { 848 if (chip->dev_ready) { 849 if (chip->dev_ready(mtd)) 850 break; 851 } else { 852 if (chip->read_byte(mtd) & NAND_STATUS_READY) 853 break; 854 } 855 mdelay(1); 856 } 857 } 858 859 /** 860 * nand_wait - [DEFAULT] wait until the command is done 861 * @mtd: MTD device structure 862 * @chip: NAND chip structure 863 * 864 * Wait for command done. This applies to erase and program only. 865 */ 866 static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) 867 { 868 int status; 869 unsigned long timeo = 400; 870 871 led_trigger_event(nand_led_trigger, LED_FULL); 872 873 /* 874 * Apply this short delay always to ensure that we do wait tWB in any 875 * case on any machine. 876 */ 877 ndelay(100); 878 879 chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); 880 881 u32 timer = (CONFIG_SYS_HZ * timeo) / 1000; 882 u32 time_start; 883 884 time_start = get_timer(0); 885 while (get_timer(time_start) < timer) { 886 if (chip->dev_ready) { 887 if (chip->dev_ready(mtd)) 888 break; 889 } else { 890 if (chip->read_byte(mtd) & NAND_STATUS_READY) 891 break; 892 } 893 } 894 led_trigger_event(nand_led_trigger, LED_OFF); 895 896 status = (int)chip->read_byte(mtd); 897 /* This can happen if in case of timeout or buggy dev_ready */ 898 WARN_ON(!(status & NAND_STATUS_READY)); 899 return status; 900 } 901 902 /** 903 * nand_reset_data_interface - Reset data interface and timings 904 * @chip: The NAND chip 905 * @chipnr: Internal die id 906 * 907 * Reset the Data interface and timings to ONFI mode 0. 908 * 909 * Returns 0 for success or negative error code otherwise. 910 */ 911 static int nand_reset_data_interface(struct nand_chip *chip, int chipnr) 912 { 913 struct mtd_info *mtd = nand_to_mtd(chip); 914 const struct nand_data_interface *conf; 915 int ret; 916 917 if (!chip->setup_data_interface) 918 return 0; 919 920 /* 921 * The ONFI specification says: 922 * " 923 * To transition from NV-DDR or NV-DDR2 to the SDR data 924 * interface, the host shall use the Reset (FFh) command 925 * using SDR timing mode 0. A device in any timing mode is 926 * required to recognize Reset (FFh) command issued in SDR 927 * timing mode 0. 928 * " 929 * 930 * Configure the data interface in SDR mode and set the 931 * timings to timing mode 0. 932 */ 933 934 conf = nand_get_default_data_interface(); 935 ret = chip->setup_data_interface(mtd, chipnr, conf); 936 if (ret) 937 pr_err("Failed to configure data interface to SDR timing mode 0\n"); 938 939 return ret; 940 } 941 942 /** 943 * nand_setup_data_interface - Setup the best data interface and timings 944 * @chip: The NAND chip 945 * @chipnr: Internal die id 946 * 947 * Find and configure the best data interface and NAND timings supported by 948 * the chip and the driver. 949 * First tries to retrieve supported timing modes from ONFI information, 950 * and if the NAND chip does not support ONFI, relies on the 951 * ->onfi_timing_mode_default specified in the nand_ids table. 952 * 953 * Returns 0 for success or negative error code otherwise. 954 */ 955 static int nand_setup_data_interface(struct nand_chip *chip, int chipnr) 956 { 957 struct mtd_info *mtd = nand_to_mtd(chip); 958 int ret; 959 960 if (!chip->setup_data_interface || !chip->data_interface) 961 return 0; 962 963 /* 964 * Ensure the timing mode has been changed on the chip side 965 * before changing timings on the controller side. 966 */ 967 if (chip->onfi_version) { 968 u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = { 969 chip->onfi_timing_mode_default, 970 }; 971 972 ret = chip->onfi_set_features(mtd, chip, 973 ONFI_FEATURE_ADDR_TIMING_MODE, 974 tmode_param); 975 if (ret) 976 goto err; 977 } 978 979 ret = chip->setup_data_interface(mtd, chipnr, chip->data_interface); 980 err: 981 return ret; 982 } 983 984 /** 985 * nand_init_data_interface - find the best data interface and timings 986 * @chip: The NAND chip 987 * 988 * Find the best data interface and NAND timings supported by the chip 989 * and the driver. 990 * First tries to retrieve supported timing modes from ONFI information, 991 * and if the NAND chip does not support ONFI, relies on the 992 * ->onfi_timing_mode_default specified in the nand_ids table. After this 993 * function nand_chip->data_interface is initialized with the best timing mode 994 * available. 995 * 996 * Returns 0 for success or negative error code otherwise. 997 */ 998 static int nand_init_data_interface(struct nand_chip *chip) 999 { 1000 struct mtd_info *mtd = nand_to_mtd(chip); 1001 int modes, mode, ret; 1002 1003 if (!chip->setup_data_interface) 1004 return 0; 1005 1006 /* 1007 * First try to identify the best timings from ONFI parameters and 1008 * if the NAND does not support ONFI, fallback to the default ONFI 1009 * timing mode. 1010 */ 1011 modes = onfi_get_async_timing_mode(chip); 1012 if (modes == ONFI_TIMING_MODE_UNKNOWN) { 1013 if (!chip->onfi_timing_mode_default) 1014 return 0; 1015 1016 modes = GENMASK(chip->onfi_timing_mode_default, 0); 1017 } 1018 1019 chip->data_interface = kzalloc(sizeof(*chip->data_interface), 1020 GFP_KERNEL); 1021 if (!chip->data_interface) 1022 return -ENOMEM; 1023 1024 for (mode = fls(modes) - 1; mode >= 0; mode--) { 1025 ret = onfi_init_data_interface(chip, chip->data_interface, 1026 NAND_SDR_IFACE, mode); 1027 if (ret) 1028 continue; 1029 1030 /* Pass -1 to only */ 1031 ret = chip->setup_data_interface(mtd, 1032 NAND_DATA_IFACE_CHECK_ONLY, 1033 chip->data_interface); 1034 if (!ret) { 1035 chip->onfi_timing_mode_default = mode; 1036 break; 1037 } 1038 } 1039 1040 return 0; 1041 } 1042 1043 static void __maybe_unused nand_release_data_interface(struct nand_chip *chip) 1044 { 1045 kfree(chip->data_interface); 1046 } 1047 1048 /** 1049 * nand_reset - Reset and initialize a NAND device 1050 * @chip: The NAND chip 1051 * @chipnr: Internal die id 1052 * 1053 * Returns 0 for success or negative error code otherwise 1054 */ 1055 int nand_reset(struct nand_chip *chip, int chipnr) 1056 { 1057 struct mtd_info *mtd = nand_to_mtd(chip); 1058 int ret; 1059 1060 ret = nand_reset_data_interface(chip, chipnr); 1061 if (ret) 1062 return ret; 1063 1064 /* 1065 * The CS line has to be released before we can apply the new NAND 1066 * interface settings, hence this weird ->select_chip() dance. 1067 */ 1068 chip->select_chip(mtd, chipnr); 1069 chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); 1070 chip->select_chip(mtd, -1); 1071 1072 chip->select_chip(mtd, chipnr); 1073 ret = nand_setup_data_interface(chip, chipnr); 1074 chip->select_chip(mtd, -1); 1075 if (ret) 1076 return ret; 1077 1078 return 0; 1079 } 1080 1081 /** 1082 * nand_check_erased_buf - check if a buffer contains (almost) only 0xff data 1083 * @buf: buffer to test 1084 * @len: buffer length 1085 * @bitflips_threshold: maximum number of bitflips 1086 * 1087 * Check if a buffer contains only 0xff, which means the underlying region 1088 * has been erased and is ready to be programmed. 1089 * The bitflips_threshold specify the maximum number of bitflips before 1090 * considering the region is not erased. 1091 * Note: The logic of this function has been extracted from the memweight 1092 * implementation, except that nand_check_erased_buf function exit before 1093 * testing the whole buffer if the number of bitflips exceed the 1094 * bitflips_threshold value. 1095 * 1096 * Returns a positive number of bitflips less than or equal to 1097 * bitflips_threshold, or -ERROR_CODE for bitflips in excess of the 1098 * threshold. 1099 */ 1100 static int nand_check_erased_buf(void *buf, int len, int bitflips_threshold) 1101 { 1102 const unsigned char *bitmap = buf; 1103 int bitflips = 0; 1104 int weight; 1105 1106 for (; len && ((uintptr_t)bitmap) % sizeof(long); 1107 len--, bitmap++) { 1108 weight = hweight8(*bitmap); 1109 bitflips += BITS_PER_BYTE - weight; 1110 if (unlikely(bitflips > bitflips_threshold)) 1111 return -EBADMSG; 1112 } 1113 1114 for (; len >= 4; len -= 4, bitmap += 4) { 1115 weight = hweight32(*((u32 *)bitmap)); 1116 bitflips += 32 - weight; 1117 if (unlikely(bitflips > bitflips_threshold)) 1118 return -EBADMSG; 1119 } 1120 1121 for (; len > 0; len--, bitmap++) { 1122 weight = hweight8(*bitmap); 1123 bitflips += BITS_PER_BYTE - weight; 1124 if (unlikely(bitflips > bitflips_threshold)) 1125 return -EBADMSG; 1126 } 1127 1128 return bitflips; 1129 } 1130 1131 /** 1132 * nand_check_erased_ecc_chunk - check if an ECC chunk contains (almost) only 1133 * 0xff data 1134 * @data: data buffer to test 1135 * @datalen: data length 1136 * @ecc: ECC buffer 1137 * @ecclen: ECC length 1138 * @extraoob: extra OOB buffer 1139 * @extraooblen: extra OOB length 1140 * @bitflips_threshold: maximum number of bitflips 1141 * 1142 * Check if a data buffer and its associated ECC and OOB data contains only 1143 * 0xff pattern, which means the underlying region has been erased and is 1144 * ready to be programmed. 1145 * The bitflips_threshold specify the maximum number of bitflips before 1146 * considering the region as not erased. 1147 * 1148 * Note: 1149 * 1/ ECC algorithms are working on pre-defined block sizes which are usually 1150 * different from the NAND page size. When fixing bitflips, ECC engines will 1151 * report the number of errors per chunk, and the NAND core infrastructure 1152 * expect you to return the maximum number of bitflips for the whole page. 1153 * This is why you should always use this function on a single chunk and 1154 * not on the whole page. After checking each chunk you should update your 1155 * max_bitflips value accordingly. 1156 * 2/ When checking for bitflips in erased pages you should not only check 1157 * the payload data but also their associated ECC data, because a user might 1158 * have programmed almost all bits to 1 but a few. In this case, we 1159 * shouldn't consider the chunk as erased, and checking ECC bytes prevent 1160 * this case. 1161 * 3/ The extraoob argument is optional, and should be used if some of your OOB 1162 * data are protected by the ECC engine. 1163 * It could also be used if you support subpages and want to attach some 1164 * extra OOB data to an ECC chunk. 1165 * 1166 * Returns a positive number of bitflips less than or equal to 1167 * bitflips_threshold, or -ERROR_CODE for bitflips in excess of the 1168 * threshold. In case of success, the passed buffers are filled with 0xff. 1169 */ 1170 int nand_check_erased_ecc_chunk(void *data, int datalen, 1171 void *ecc, int ecclen, 1172 void *extraoob, int extraooblen, 1173 int bitflips_threshold) 1174 { 1175 int data_bitflips = 0, ecc_bitflips = 0, extraoob_bitflips = 0; 1176 1177 data_bitflips = nand_check_erased_buf(data, datalen, 1178 bitflips_threshold); 1179 if (data_bitflips < 0) 1180 return data_bitflips; 1181 1182 bitflips_threshold -= data_bitflips; 1183 1184 ecc_bitflips = nand_check_erased_buf(ecc, ecclen, bitflips_threshold); 1185 if (ecc_bitflips < 0) 1186 return ecc_bitflips; 1187 1188 bitflips_threshold -= ecc_bitflips; 1189 1190 extraoob_bitflips = nand_check_erased_buf(extraoob, extraooblen, 1191 bitflips_threshold); 1192 if (extraoob_bitflips < 0) 1193 return extraoob_bitflips; 1194 1195 if (data_bitflips) 1196 memset(data, 0xff, datalen); 1197 1198 if (ecc_bitflips) 1199 memset(ecc, 0xff, ecclen); 1200 1201 if (extraoob_bitflips) 1202 memset(extraoob, 0xff, extraooblen); 1203 1204 return data_bitflips + ecc_bitflips + extraoob_bitflips; 1205 } 1206 EXPORT_SYMBOL(nand_check_erased_ecc_chunk); 1207 1208 /** 1209 * nand_read_page_raw - [INTERN] read raw page data without ecc 1210 * @mtd: mtd info structure 1211 * @chip: nand chip info structure 1212 * @buf: buffer to store read data 1213 * @oob_required: caller requires OOB data read to chip->oob_poi 1214 * @page: page number to read 1215 * 1216 * Not for syndrome calculating ECC controllers, which use a special oob layout. 1217 */ 1218 static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, 1219 uint8_t *buf, int oob_required, int page) 1220 { 1221 chip->read_buf(mtd, buf, mtd->writesize); 1222 if (oob_required) 1223 chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); 1224 return 0; 1225 } 1226 1227 /** 1228 * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc 1229 * @mtd: mtd info structure 1230 * @chip: nand chip info structure 1231 * @buf: buffer to store read data 1232 * @oob_required: caller requires OOB data read to chip->oob_poi 1233 * @page: page number to read 1234 * 1235 * We need a special oob layout and handling even when OOB isn't used. 1236 */ 1237 static int nand_read_page_raw_syndrome(struct mtd_info *mtd, 1238 struct nand_chip *chip, uint8_t *buf, 1239 int oob_required, int page) 1240 { 1241 int eccsize = chip->ecc.size; 1242 int eccbytes = chip->ecc.bytes; 1243 uint8_t *oob = chip->oob_poi; 1244 int steps, size; 1245 1246 for (steps = chip->ecc.steps; steps > 0; steps--) { 1247 chip->read_buf(mtd, buf, eccsize); 1248 buf += eccsize; 1249 1250 if (chip->ecc.prepad) { 1251 chip->read_buf(mtd, oob, chip->ecc.prepad); 1252 oob += chip->ecc.prepad; 1253 } 1254 1255 chip->read_buf(mtd, oob, eccbytes); 1256 oob += eccbytes; 1257 1258 if (chip->ecc.postpad) { 1259 chip->read_buf(mtd, oob, chip->ecc.postpad); 1260 oob += chip->ecc.postpad; 1261 } 1262 } 1263 1264 size = mtd->oobsize - (oob - chip->oob_poi); 1265 if (size) 1266 chip->read_buf(mtd, oob, size); 1267 1268 return 0; 1269 } 1270 1271 /** 1272 * nand_read_page_swecc - [REPLACEABLE] software ECC based page read function 1273 * @mtd: mtd info structure 1274 * @chip: nand chip info structure 1275 * @buf: buffer to store read data 1276 * @oob_required: caller requires OOB data read to chip->oob_poi 1277 * @page: page number to read 1278 */ 1279 static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, 1280 uint8_t *buf, int oob_required, int page) 1281 { 1282 int i, eccsize = chip->ecc.size; 1283 int eccbytes = chip->ecc.bytes; 1284 int eccsteps = chip->ecc.steps; 1285 uint8_t *p = buf; 1286 uint8_t *ecc_calc = chip->buffers->ecccalc; 1287 uint8_t *ecc_code = chip->buffers->ecccode; 1288 uint32_t *eccpos = chip->ecc.layout->eccpos; 1289 unsigned int max_bitflips = 0; 1290 1291 chip->ecc.read_page_raw(mtd, chip, buf, 1, page); 1292 1293 for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) 1294 chip->ecc.calculate(mtd, p, &ecc_calc[i]); 1295 1296 for (i = 0; i < chip->ecc.total; i++) 1297 ecc_code[i] = chip->oob_poi[eccpos[i]]; 1298 1299 eccsteps = chip->ecc.steps; 1300 p = buf; 1301 1302 for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { 1303 int stat; 1304 1305 stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); 1306 if (stat < 0) { 1307 mtd->ecc_stats.failed++; 1308 } else { 1309 mtd->ecc_stats.corrected += stat; 1310 max_bitflips = max_t(unsigned int, max_bitflips, stat); 1311 } 1312 } 1313 return max_bitflips; 1314 } 1315 1316 /** 1317 * nand_read_subpage - [REPLACEABLE] ECC based sub-page read function 1318 * @mtd: mtd info structure 1319 * @chip: nand chip info structure 1320 * @data_offs: offset of requested data within the page 1321 * @readlen: data length 1322 * @bufpoi: buffer to store read data 1323 * @page: page number to read 1324 */ 1325 static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, 1326 uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, 1327 int page) 1328 { 1329 int start_step, end_step, num_steps; 1330 uint32_t *eccpos = chip->ecc.layout->eccpos; 1331 uint8_t *p; 1332 int data_col_addr, i, gaps = 0; 1333 int datafrag_len, eccfrag_len, aligned_len, aligned_pos; 1334 int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1; 1335 int index; 1336 unsigned int max_bitflips = 0; 1337 1338 /* Column address within the page aligned to ECC size (256bytes) */ 1339 start_step = data_offs / chip->ecc.size; 1340 end_step = (data_offs + readlen - 1) / chip->ecc.size; 1341 num_steps = end_step - start_step + 1; 1342 index = start_step * chip->ecc.bytes; 1343 1344 /* Data size aligned to ECC ecc.size */ 1345 datafrag_len = num_steps * chip->ecc.size; 1346 eccfrag_len = num_steps * chip->ecc.bytes; 1347 1348 data_col_addr = start_step * chip->ecc.size; 1349 /* If we read not a page aligned data */ 1350 if (data_col_addr != 0) 1351 chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1); 1352 1353 p = bufpoi + data_col_addr; 1354 chip->read_buf(mtd, p, datafrag_len); 1355 1356 /* Calculate ECC */ 1357 for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) 1358 chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]); 1359 1360 /* 1361 * The performance is faster if we position offsets according to 1362 * ecc.pos. Let's make sure that there are no gaps in ECC positions. 1363 */ 1364 for (i = 0; i < eccfrag_len - 1; i++) { 1365 if (eccpos[i + index] + 1 != eccpos[i + index + 1]) { 1366 gaps = 1; 1367 break; 1368 } 1369 } 1370 if (gaps) { 1371 chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); 1372 chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); 1373 } else { 1374 /* 1375 * Send the command to read the particular ECC bytes take care 1376 * about buswidth alignment in read_buf. 1377 */ 1378 aligned_pos = eccpos[index] & ~(busw - 1); 1379 aligned_len = eccfrag_len; 1380 if (eccpos[index] & (busw - 1)) 1381 aligned_len++; 1382 if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1)) 1383 aligned_len++; 1384 1385 chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 1386 mtd->writesize + aligned_pos, -1); 1387 chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); 1388 } 1389 1390 for (i = 0; i < eccfrag_len; i++) 1391 chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]]; 1392 1393 p = bufpoi + data_col_addr; 1394 for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) { 1395 int stat; 1396 1397 stat = chip->ecc.correct(mtd, p, 1398 &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]); 1399 if (stat == -EBADMSG && 1400 (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) { 1401 /* check for empty pages with bitflips */ 1402 stat = nand_check_erased_ecc_chunk(p, chip->ecc.size, 1403 &chip->buffers->ecccode[i], 1404 chip->ecc.bytes, 1405 NULL, 0, 1406 chip->ecc.strength); 1407 } 1408 1409 if (stat < 0) { 1410 mtd->ecc_stats.failed++; 1411 } else { 1412 mtd->ecc_stats.corrected += stat; 1413 max_bitflips = max_t(unsigned int, max_bitflips, stat); 1414 } 1415 } 1416 return max_bitflips; 1417 } 1418 1419 /** 1420 * nand_read_page_hwecc - [REPLACEABLE] hardware ECC based page read function 1421 * @mtd: mtd info structure 1422 * @chip: nand chip info structure 1423 * @buf: buffer to store read data 1424 * @oob_required: caller requires OOB data read to chip->oob_poi 1425 * @page: page number to read 1426 * 1427 * Not for syndrome calculating ECC controllers which need a special oob layout. 1428 */ 1429 static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, 1430 uint8_t *buf, int oob_required, int page) 1431 { 1432 int i, eccsize = chip->ecc.size; 1433 int eccbytes = chip->ecc.bytes; 1434 int eccsteps = chip->ecc.steps; 1435 uint8_t *p = buf; 1436 uint8_t *ecc_calc = chip->buffers->ecccalc; 1437 uint8_t *ecc_code = chip->buffers->ecccode; 1438 uint32_t *eccpos = chip->ecc.layout->eccpos; 1439 unsigned int max_bitflips = 0; 1440 1441 for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { 1442 chip->ecc.hwctl(mtd, NAND_ECC_READ); 1443 chip->read_buf(mtd, p, eccsize); 1444 chip->ecc.calculate(mtd, p, &ecc_calc[i]); 1445 } 1446 chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); 1447 1448 for (i = 0; i < chip->ecc.total; i++) 1449 ecc_code[i] = chip->oob_poi[eccpos[i]]; 1450 1451 eccsteps = chip->ecc.steps; 1452 p = buf; 1453 1454 for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { 1455 int stat; 1456 1457 stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); 1458 if (stat == -EBADMSG && 1459 (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) { 1460 /* check for empty pages with bitflips */ 1461 stat = nand_check_erased_ecc_chunk(p, eccsize, 1462 &ecc_code[i], eccbytes, 1463 NULL, 0, 1464 chip->ecc.strength); 1465 } 1466 1467 if (stat < 0) { 1468 mtd->ecc_stats.failed++; 1469 } else { 1470 mtd->ecc_stats.corrected += stat; 1471 max_bitflips = max_t(unsigned int, max_bitflips, stat); 1472 } 1473 } 1474 return max_bitflips; 1475 } 1476 1477 /** 1478 * nand_read_page_hwecc_oob_first - [REPLACEABLE] hw ecc, read oob first 1479 * @mtd: mtd info structure 1480 * @chip: nand chip info structure 1481 * @buf: buffer to store read data 1482 * @oob_required: caller requires OOB data read to chip->oob_poi 1483 * @page: page number to read 1484 * 1485 * Hardware ECC for large page chips, require OOB to be read first. For this 1486 * ECC mode, the write_page method is re-used from ECC_HW. These methods 1487 * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with 1488 * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from 1489 * the data area, by overwriting the NAND manufacturer bad block markings. 1490 */ 1491 static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, 1492 struct nand_chip *chip, uint8_t *buf, int oob_required, int page) 1493 { 1494 int i, eccsize = chip->ecc.size; 1495 int eccbytes = chip->ecc.bytes; 1496 int eccsteps = chip->ecc.steps; 1497 uint8_t *p = buf; 1498 uint8_t *ecc_code = chip->buffers->ecccode; 1499 uint32_t *eccpos = chip->ecc.layout->eccpos; 1500 uint8_t *ecc_calc = chip->buffers->ecccalc; 1501 unsigned int max_bitflips = 0; 1502 1503 /* Read the OOB area first */ 1504 chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); 1505 chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); 1506 chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); 1507 1508 for (i = 0; i < chip->ecc.total; i++) 1509 ecc_code[i] = chip->oob_poi[eccpos[i]]; 1510 1511 for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { 1512 int stat; 1513 1514 chip->ecc.hwctl(mtd, NAND_ECC_READ); 1515 chip->read_buf(mtd, p, eccsize); 1516 chip->ecc.calculate(mtd, p, &ecc_calc[i]); 1517 1518 stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); 1519 if (stat == -EBADMSG && 1520 (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) { 1521 /* check for empty pages with bitflips */ 1522 stat = nand_check_erased_ecc_chunk(p, eccsize, 1523 &ecc_code[i], eccbytes, 1524 NULL, 0, 1525 chip->ecc.strength); 1526 } 1527 1528 if (stat < 0) { 1529 mtd->ecc_stats.failed++; 1530 } else { 1531 mtd->ecc_stats.corrected += stat; 1532 max_bitflips = max_t(unsigned int, max_bitflips, stat); 1533 } 1534 } 1535 return max_bitflips; 1536 } 1537 1538 /** 1539 * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read 1540 * @mtd: mtd info structure 1541 * @chip: nand chip info structure 1542 * @buf: buffer to store read data 1543 * @oob_required: caller requires OOB data read to chip->oob_poi 1544 * @page: page number to read 1545 * 1546 * The hw generator calculates the error syndrome automatically. Therefore we 1547 * need a special oob layout and handling. 1548 */ 1549 static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, 1550 uint8_t *buf, int oob_required, int page) 1551 { 1552 int i, eccsize = chip->ecc.size; 1553 int eccbytes = chip->ecc.bytes; 1554 int eccsteps = chip->ecc.steps; 1555 int eccpadbytes = eccbytes + chip->ecc.prepad + chip->ecc.postpad; 1556 uint8_t *p = buf; 1557 uint8_t *oob = chip->oob_poi; 1558 unsigned int max_bitflips = 0; 1559 1560 for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { 1561 int stat; 1562 1563 chip->ecc.hwctl(mtd, NAND_ECC_READ); 1564 chip->read_buf(mtd, p, eccsize); 1565 1566 if (chip->ecc.prepad) { 1567 chip->read_buf(mtd, oob, chip->ecc.prepad); 1568 oob += chip->ecc.prepad; 1569 } 1570 1571 chip->ecc.hwctl(mtd, NAND_ECC_READSYN); 1572 chip->read_buf(mtd, oob, eccbytes); 1573 stat = chip->ecc.correct(mtd, p, oob, NULL); 1574 1575 oob += eccbytes; 1576 1577 if (chip->ecc.postpad) { 1578 chip->read_buf(mtd, oob, chip->ecc.postpad); 1579 oob += chip->ecc.postpad; 1580 } 1581 1582 if (stat == -EBADMSG && 1583 (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) { 1584 /* check for empty pages with bitflips */ 1585 stat = nand_check_erased_ecc_chunk(p, chip->ecc.size, 1586 oob - eccpadbytes, 1587 eccpadbytes, 1588 NULL, 0, 1589 chip->ecc.strength); 1590 } 1591 1592 if (stat < 0) { 1593 mtd->ecc_stats.failed++; 1594 } else { 1595 mtd->ecc_stats.corrected += stat; 1596 max_bitflips = max_t(unsigned int, max_bitflips, stat); 1597 } 1598 } 1599 1600 /* Calculate remaining oob bytes */ 1601 i = mtd->oobsize - (oob - chip->oob_poi); 1602 if (i) 1603 chip->read_buf(mtd, oob, i); 1604 1605 return max_bitflips; 1606 } 1607 1608 /** 1609 * nand_transfer_oob - [INTERN] Transfer oob to client buffer 1610 * @chip: nand chip structure 1611 * @oob: oob destination address 1612 * @ops: oob ops structure 1613 * @len: size of oob to transfer 1614 */ 1615 static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, 1616 struct mtd_oob_ops *ops, size_t len) 1617 { 1618 switch (ops->mode) { 1619 1620 case MTD_OPS_PLACE_OOB: 1621 case MTD_OPS_RAW: 1622 memcpy(oob, chip->oob_poi + ops->ooboffs, len); 1623 return oob + len; 1624 1625 case MTD_OPS_AUTO_OOB: { 1626 struct nand_oobfree *free = chip->ecc.layout->oobfree; 1627 uint32_t boffs = 0, roffs = ops->ooboffs; 1628 size_t bytes = 0; 1629 1630 for (; free->length && len; free++, len -= bytes) { 1631 /* Read request not from offset 0? */ 1632 if (unlikely(roffs)) { 1633 if (roffs >= free->length) { 1634 roffs -= free->length; 1635 continue; 1636 } 1637 boffs = free->offset + roffs; 1638 bytes = min_t(size_t, len, 1639 (free->length - roffs)); 1640 roffs = 0; 1641 } else { 1642 bytes = min_t(size_t, len, free->length); 1643 boffs = free->offset; 1644 } 1645 memcpy(oob, chip->oob_poi + boffs, bytes); 1646 oob += bytes; 1647 } 1648 return oob; 1649 } 1650 default: 1651 BUG(); 1652 } 1653 return NULL; 1654 } 1655 1656 /** 1657 * nand_setup_read_retry - [INTERN] Set the READ RETRY mode 1658 * @mtd: MTD device structure 1659 * @retry_mode: the retry mode to use 1660 * 1661 * Some vendors supply a special command to shift the Vt threshold, to be used 1662 * when there are too many bitflips in a page (i.e., ECC error). After setting 1663 * a new threshold, the host should retry reading the page. 1664 */ 1665 static int nand_setup_read_retry(struct mtd_info *mtd, int retry_mode) 1666 { 1667 struct nand_chip *chip = mtd_to_nand(mtd); 1668 1669 pr_debug("setting READ RETRY mode %d\n", retry_mode); 1670 1671 if (retry_mode >= chip->read_retries) 1672 return -EINVAL; 1673 1674 if (!chip->setup_read_retry) 1675 return -EOPNOTSUPP; 1676 1677 return chip->setup_read_retry(mtd, retry_mode); 1678 } 1679 1680 /** 1681 * nand_do_read_ops - [INTERN] Read data with ECC 1682 * @mtd: MTD device structure 1683 * @from: offset to read from 1684 * @ops: oob ops structure 1685 * 1686 * Internal function. Called with chip held. 1687 */ 1688 static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, 1689 struct mtd_oob_ops *ops) 1690 { 1691 int chipnr, page, realpage, col, bytes, aligned, oob_required; 1692 struct nand_chip *chip = mtd_to_nand(mtd); 1693 int ret = 0; 1694 uint32_t readlen = ops->len; 1695 uint32_t oobreadlen = ops->ooblen; 1696 uint32_t max_oobsize = mtd_oobavail(mtd, ops); 1697 1698 uint8_t *bufpoi, *oob, *buf; 1699 int use_bufpoi; 1700 unsigned int max_bitflips = 0; 1701 int retry_mode = 0; 1702 bool ecc_fail = false; 1703 1704 chipnr = (int)(from >> chip->chip_shift); 1705 chip->select_chip(mtd, chipnr); 1706 1707 realpage = (int)(from >> chip->page_shift); 1708 page = realpage & chip->pagemask; 1709 1710 col = (int)(from & (mtd->writesize - 1)); 1711 1712 buf = ops->datbuf; 1713 oob = ops->oobbuf; 1714 oob_required = oob ? 1 : 0; 1715 1716 while (1) { 1717 unsigned int ecc_failures = mtd->ecc_stats.failed; 1718 1719 WATCHDOG_RESET(); 1720 bytes = min(mtd->writesize - col, readlen); 1721 aligned = (bytes == mtd->writesize); 1722 1723 if (!aligned) 1724 use_bufpoi = 1; 1725 else if (chip->options & NAND_USE_BOUNCE_BUFFER) 1726 use_bufpoi = !IS_ALIGNED((unsigned long)buf, 1727 chip->buf_align); 1728 else 1729 use_bufpoi = 0; 1730 1731 /* Is the current page in the buffer? */ 1732 if (realpage != chip->pagebuf || oob) { 1733 bufpoi = use_bufpoi ? chip->buffers->databuf : buf; 1734 1735 if (use_bufpoi && aligned) 1736 pr_debug("%s: using read bounce buffer for buf@%p\n", 1737 __func__, buf); 1738 1739 read_retry: 1740 if (nand_standard_page_accessors(&chip->ecc)) 1741 chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); 1742 1743 /* 1744 * Now read the page into the buffer. Absent an error, 1745 * the read methods return max bitflips per ecc step. 1746 */ 1747 if (unlikely(ops->mode == MTD_OPS_RAW)) 1748 ret = chip->ecc.read_page_raw(mtd, chip, bufpoi, 1749 oob_required, 1750 page); 1751 else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) && 1752 !oob) 1753 ret = chip->ecc.read_subpage(mtd, chip, 1754 col, bytes, bufpoi, 1755 page); 1756 else 1757 ret = chip->ecc.read_page(mtd, chip, bufpoi, 1758 oob_required, page); 1759 if (ret < 0) { 1760 if (use_bufpoi) 1761 /* Invalidate page cache */ 1762 chip->pagebuf = -1; 1763 break; 1764 } 1765 1766 max_bitflips = max_t(unsigned int, max_bitflips, ret); 1767 1768 /* Transfer not aligned data */ 1769 if (use_bufpoi) { 1770 if (!NAND_HAS_SUBPAGE_READ(chip) && !oob && 1771 !(mtd->ecc_stats.failed - ecc_failures) && 1772 (ops->mode != MTD_OPS_RAW)) { 1773 chip->pagebuf = realpage; 1774 chip->pagebuf_bitflips = ret; 1775 } else { 1776 /* Invalidate page cache */ 1777 chip->pagebuf = -1; 1778 } 1779 memcpy(buf, chip->buffers->databuf + col, bytes); 1780 } 1781 1782 if (unlikely(oob)) { 1783 int toread = min(oobreadlen, max_oobsize); 1784 1785 if (toread) { 1786 oob = nand_transfer_oob(chip, 1787 oob, ops, toread); 1788 oobreadlen -= toread; 1789 } 1790 } 1791 1792 if (chip->options & NAND_NEED_READRDY) { 1793 /* Apply delay or wait for ready/busy pin */ 1794 if (!chip->dev_ready) 1795 udelay(chip->chip_delay); 1796 else 1797 nand_wait_ready(mtd); 1798 } 1799 1800 if (mtd->ecc_stats.failed - ecc_failures) { 1801 if (retry_mode + 1 < chip->read_retries) { 1802 retry_mode++; 1803 ret = nand_setup_read_retry(mtd, 1804 retry_mode); 1805 if (ret < 0) 1806 break; 1807 1808 /* Reset failures; retry */ 1809 mtd->ecc_stats.failed = ecc_failures; 1810 goto read_retry; 1811 } else { 1812 /* No more retry modes; real failure */ 1813 ecc_fail = true; 1814 } 1815 } 1816 1817 buf += bytes; 1818 } else { 1819 memcpy(buf, chip->buffers->databuf + col, bytes); 1820 buf += bytes; 1821 max_bitflips = max_t(unsigned int, max_bitflips, 1822 chip->pagebuf_bitflips); 1823 } 1824 1825 readlen -= bytes; 1826 1827 /* Reset to retry mode 0 */ 1828 if (retry_mode) { 1829 ret = nand_setup_read_retry(mtd, 0); 1830 if (ret < 0) 1831 break; 1832 retry_mode = 0; 1833 } 1834 1835 if (!readlen) 1836 break; 1837 1838 /* For subsequent reads align to page boundary */ 1839 col = 0; 1840 /* Increment page address */ 1841 realpage++; 1842 1843 page = realpage & chip->pagemask; 1844 /* Check, if we cross a chip boundary */ 1845 if (!page) { 1846 chipnr++; 1847 chip->select_chip(mtd, -1); 1848 chip->select_chip(mtd, chipnr); 1849 } 1850 } 1851 chip->select_chip(mtd, -1); 1852 1853 ops->retlen = ops->len - (size_t) readlen; 1854 if (oob) 1855 ops->oobretlen = ops->ooblen - oobreadlen; 1856 1857 if (ret < 0) 1858 return ret; 1859 1860 if (ecc_fail) 1861 return -EBADMSG; 1862 1863 return max_bitflips; 1864 } 1865 1866 /** 1867 * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc 1868 * @mtd: MTD device structure 1869 * @from: offset to read from 1870 * @len: number of bytes to read 1871 * @retlen: pointer to variable to store the number of read bytes 1872 * @buf: the databuffer to put data 1873 * 1874 * Get hold of the chip and call nand_do_read. 1875 */ 1876 static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, 1877 size_t *retlen, uint8_t *buf) 1878 { 1879 struct mtd_oob_ops ops; 1880 int ret; 1881 1882 nand_get_device(mtd, FL_READING); 1883 memset(&ops, 0, sizeof(ops)); 1884 ops.len = len; 1885 ops.datbuf = buf; 1886 ops.mode = MTD_OPS_PLACE_OOB; 1887 ret = nand_do_read_ops(mtd, from, &ops); 1888 *retlen = ops.retlen; 1889 nand_release_device(mtd); 1890 return ret; 1891 } 1892 1893 /** 1894 * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function 1895 * @mtd: mtd info structure 1896 * @chip: nand chip info structure 1897 * @page: page number to read 1898 */ 1899 static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, 1900 int page) 1901 { 1902 chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); 1903 chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); 1904 return 0; 1905 } 1906 1907 /** 1908 * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC 1909 * with syndromes 1910 * @mtd: mtd info structure 1911 * @chip: nand chip info structure 1912 * @page: page number to read 1913 */ 1914 static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, 1915 int page) 1916 { 1917 int length = mtd->oobsize; 1918 int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; 1919 int eccsize = chip->ecc.size; 1920 uint8_t *bufpoi = chip->oob_poi; 1921 int i, toread, sndrnd = 0, pos; 1922 1923 chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page); 1924 for (i = 0; i < chip->ecc.steps; i++) { 1925 if (sndrnd) { 1926 pos = eccsize + i * (eccsize + chunk); 1927 if (mtd->writesize > 512) 1928 chip->cmdfunc(mtd, NAND_CMD_RNDOUT, pos, -1); 1929 else 1930 chip->cmdfunc(mtd, NAND_CMD_READ0, pos, page); 1931 } else 1932 sndrnd = 1; 1933 toread = min_t(int, length, chunk); 1934 chip->read_buf(mtd, bufpoi, toread); 1935 bufpoi += toread; 1936 length -= toread; 1937 } 1938 if (length > 0) 1939 chip->read_buf(mtd, bufpoi, length); 1940 1941 return 0; 1942 } 1943 1944 /** 1945 * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function 1946 * @mtd: mtd info structure 1947 * @chip: nand chip info structure 1948 * @page: page number to write 1949 */ 1950 static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, 1951 int page) 1952 { 1953 int status = 0; 1954 const uint8_t *buf = chip->oob_poi; 1955 int length = mtd->oobsize; 1956 1957 chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); 1958 chip->write_buf(mtd, buf, length); 1959 /* Send command to program the OOB data */ 1960 chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); 1961 1962 status = chip->waitfunc(mtd, chip); 1963 1964 return status & NAND_STATUS_FAIL ? -EIO : 0; 1965 } 1966 1967 /** 1968 * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC 1969 * with syndrome - only for large page flash 1970 * @mtd: mtd info structure 1971 * @chip: nand chip info structure 1972 * @page: page number to write 1973 */ 1974 static int nand_write_oob_syndrome(struct mtd_info *mtd, 1975 struct nand_chip *chip, int page) 1976 { 1977 int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; 1978 int eccsize = chip->ecc.size, length = mtd->oobsize; 1979 int i, len, pos, status = 0, sndcmd = 0, steps = chip->ecc.steps; 1980 const uint8_t *bufpoi = chip->oob_poi; 1981 1982 /* 1983 * data-ecc-data-ecc ... ecc-oob 1984 * or 1985 * data-pad-ecc-pad-data-pad .... ecc-pad-oob 1986 */ 1987 if (!chip->ecc.prepad && !chip->ecc.postpad) { 1988 pos = steps * (eccsize + chunk); 1989 steps = 0; 1990 } else 1991 pos = eccsize; 1992 1993 chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page); 1994 for (i = 0; i < steps; i++) { 1995 if (sndcmd) { 1996 if (mtd->writesize <= 512) { 1997 uint32_t fill = 0xFFFFFFFF; 1998 1999 len = eccsize; 2000 while (len > 0) { 2001 int num = min_t(int, len, 4); 2002 chip->write_buf(mtd, (uint8_t *)&fill, 2003 num); 2004 len -= num; 2005 } 2006 } else { 2007 pos = eccsize + i * (eccsize + chunk); 2008 chip->cmdfunc(mtd, NAND_CMD_RNDIN, pos, -1); 2009 } 2010 } else 2011 sndcmd = 1; 2012 len = min_t(int, length, chunk); 2013 chip->write_buf(mtd, bufpoi, len); 2014 bufpoi += len; 2015 length -= len; 2016 } 2017 if (length > 0) 2018 chip->write_buf(mtd, bufpoi, length); 2019 2020 chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); 2021 status = chip->waitfunc(mtd, chip); 2022 2023 return status & NAND_STATUS_FAIL ? -EIO : 0; 2024 } 2025 2026 /** 2027 * nand_do_read_oob - [INTERN] NAND read out-of-band 2028 * @mtd: MTD device structure 2029 * @from: offset to read from 2030 * @ops: oob operations description structure 2031 * 2032 * NAND read out-of-band data from the spare area. 2033 */ 2034 static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, 2035 struct mtd_oob_ops *ops) 2036 { 2037 int page, realpage, chipnr; 2038 struct nand_chip *chip = mtd_to_nand(mtd); 2039 struct mtd_ecc_stats stats; 2040 int readlen = ops->ooblen; 2041 int len; 2042 uint8_t *buf = ops->oobbuf; 2043 int ret = 0; 2044 2045 pr_debug("%s: from = 0x%08Lx, len = %i\n", 2046 __func__, (unsigned long long)from, readlen); 2047 2048 stats = mtd->ecc_stats; 2049 2050 len = mtd_oobavail(mtd, ops); 2051 2052 if (unlikely(ops->ooboffs >= len)) { 2053 pr_debug("%s: attempt to start read outside oob\n", 2054 __func__); 2055 return -EINVAL; 2056 } 2057 2058 /* Do not allow reads past end of device */ 2059 if (unlikely(from >= mtd->size || 2060 ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) - 2061 (from >> chip->page_shift)) * len)) { 2062 pr_debug("%s: attempt to read beyond end of device\n", 2063 __func__); 2064 return -EINVAL; 2065 } 2066 2067 chipnr = (int)(from >> chip->chip_shift); 2068 chip->select_chip(mtd, chipnr); 2069 2070 /* Shift to get page */ 2071 realpage = (int)(from >> chip->page_shift); 2072 page = realpage & chip->pagemask; 2073 2074 while (1) { 2075 WATCHDOG_RESET(); 2076 2077 if (ops->mode == MTD_OPS_RAW) 2078 ret = chip->ecc.read_oob_raw(mtd, chip, page); 2079 else 2080 ret = chip->ecc.read_oob(mtd, chip, page); 2081 2082 if (ret < 0) 2083 break; 2084 2085 len = min(len, readlen); 2086 buf = nand_transfer_oob(chip, buf, ops, len); 2087 2088 if (chip->options & NAND_NEED_READRDY) { 2089 /* Apply delay or wait for ready/busy pin */ 2090 if (!chip->dev_ready) 2091 udelay(chip->chip_delay); 2092 else 2093 nand_wait_ready(mtd); 2094 } 2095 2096 readlen -= len; 2097 if (!readlen) 2098 break; 2099 2100 /* Increment page address */ 2101 realpage++; 2102 2103 page = realpage & chip->pagemask; 2104 /* Check, if we cross a chip boundary */ 2105 if (!page) { 2106 chipnr++; 2107 chip->select_chip(mtd, -1); 2108 chip->select_chip(mtd, chipnr); 2109 } 2110 } 2111 chip->select_chip(mtd, -1); 2112 2113 ops->oobretlen = ops->ooblen - readlen; 2114 2115 if (ret < 0) 2116 return ret; 2117 2118 if (mtd->ecc_stats.failed - stats.failed) 2119 return -EBADMSG; 2120 2121 return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0; 2122 } 2123 2124 /** 2125 * nand_read_oob - [MTD Interface] NAND read data and/or out-of-band 2126 * @mtd: MTD device structure 2127 * @from: offset to read from 2128 * @ops: oob operation description structure 2129 * 2130 * NAND read data and/or out-of-band data. 2131 */ 2132 static int nand_read_oob(struct mtd_info *mtd, loff_t from, 2133 struct mtd_oob_ops *ops) 2134 { 2135 int ret = -ENOTSUPP; 2136 2137 ops->retlen = 0; 2138 2139 /* Do not allow reads past end of device */ 2140 if (ops->datbuf && (from + ops->len) > mtd->size) { 2141 pr_debug("%s: attempt to read beyond end of device\n", 2142 __func__); 2143 return -EINVAL; 2144 } 2145 2146 nand_get_device(mtd, FL_READING); 2147 2148 switch (ops->mode) { 2149 case MTD_OPS_PLACE_OOB: 2150 case MTD_OPS_AUTO_OOB: 2151 case MTD_OPS_RAW: 2152 break; 2153 2154 default: 2155 goto out; 2156 } 2157 2158 if (!ops->datbuf) 2159 ret = nand_do_read_oob(mtd, from, ops); 2160 else 2161 ret = nand_do_read_ops(mtd, from, ops); 2162 2163 out: 2164 nand_release_device(mtd); 2165 return ret; 2166 } 2167 2168 2169 /** 2170 * nand_write_page_raw - [INTERN] raw page write function 2171 * @mtd: mtd info structure 2172 * @chip: nand chip info structure 2173 * @buf: data buffer 2174 * @oob_required: must write chip->oob_poi to OOB 2175 * @page: page number to write 2176 * 2177 * Not for syndrome calculating ECC controllers, which use a special oob layout. 2178 */ 2179 static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, 2180 const uint8_t *buf, int oob_required, int page) 2181 { 2182 chip->write_buf(mtd, buf, mtd->writesize); 2183 if (oob_required) 2184 chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); 2185 2186 return 0; 2187 } 2188 2189 /** 2190 * nand_write_page_raw_syndrome - [INTERN] raw page write function 2191 * @mtd: mtd info structure 2192 * @chip: nand chip info structure 2193 * @buf: data buffer 2194 * @oob_required: must write chip->oob_poi to OOB 2195 * @page: page number to write 2196 * 2197 * We need a special oob layout and handling even when ECC isn't checked. 2198 */ 2199 static int nand_write_page_raw_syndrome(struct mtd_info *mtd, 2200 struct nand_chip *chip, 2201 const uint8_t *buf, int oob_required, 2202 int page) 2203 { 2204 int eccsize = chip->ecc.size; 2205 int eccbytes = chip->ecc.bytes; 2206 uint8_t *oob = chip->oob_poi; 2207 int steps, size; 2208 2209 for (steps = chip->ecc.steps; steps > 0; steps--) { 2210 chip->write_buf(mtd, buf, eccsize); 2211 buf += eccsize; 2212 2213 if (chip->ecc.prepad) { 2214 chip->write_buf(mtd, oob, chip->ecc.prepad); 2215 oob += chip->ecc.prepad; 2216 } 2217 2218 chip->write_buf(mtd, oob, eccbytes); 2219 oob += eccbytes; 2220 2221 if (chip->ecc.postpad) { 2222 chip->write_buf(mtd, oob, chip->ecc.postpad); 2223 oob += chip->ecc.postpad; 2224 } 2225 } 2226 2227 size = mtd->oobsize - (oob - chip->oob_poi); 2228 if (size) 2229 chip->write_buf(mtd, oob, size); 2230 2231 return 0; 2232 } 2233 /** 2234 * nand_write_page_swecc - [REPLACEABLE] software ECC based page write function 2235 * @mtd: mtd info structure 2236 * @chip: nand chip info structure 2237 * @buf: data buffer 2238 * @oob_required: must write chip->oob_poi to OOB 2239 * @page: page number to write 2240 */ 2241 static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, 2242 const uint8_t *buf, int oob_required, 2243 int page) 2244 { 2245 int i, eccsize = chip->ecc.size; 2246 int eccbytes = chip->ecc.bytes; 2247 int eccsteps = chip->ecc.steps; 2248 uint8_t *ecc_calc = chip->buffers->ecccalc; 2249 const uint8_t *p = buf; 2250 uint32_t *eccpos = chip->ecc.layout->eccpos; 2251 2252 /* Software ECC calculation */ 2253 for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) 2254 chip->ecc.calculate(mtd, p, &ecc_calc[i]); 2255 2256 for (i = 0; i < chip->ecc.total; i++) 2257 chip->oob_poi[eccpos[i]] = ecc_calc[i]; 2258 2259 return chip->ecc.write_page_raw(mtd, chip, buf, 1, page); 2260 } 2261 2262 /** 2263 * nand_write_page_hwecc - [REPLACEABLE] hardware ECC based page write function 2264 * @mtd: mtd info structure 2265 * @chip: nand chip info structure 2266 * @buf: data buffer 2267 * @oob_required: must write chip->oob_poi to OOB 2268 * @page: page number to write 2269 */ 2270 static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, 2271 const uint8_t *buf, int oob_required, 2272 int page) 2273 { 2274 int i, eccsize = chip->ecc.size; 2275 int eccbytes = chip->ecc.bytes; 2276 int eccsteps = chip->ecc.steps; 2277 uint8_t *ecc_calc = chip->buffers->ecccalc; 2278 const uint8_t *p = buf; 2279 uint32_t *eccpos = chip->ecc.layout->eccpos; 2280 2281 for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { 2282 chip->ecc.hwctl(mtd, NAND_ECC_WRITE); 2283 chip->write_buf(mtd, p, eccsize); 2284 chip->ecc.calculate(mtd, p, &ecc_calc[i]); 2285 } 2286 2287 for (i = 0; i < chip->ecc.total; i++) 2288 chip->oob_poi[eccpos[i]] = ecc_calc[i]; 2289 2290 chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); 2291 2292 return 0; 2293 } 2294 2295 2296 /** 2297 * nand_write_subpage_hwecc - [REPLACEABLE] hardware ECC based subpage write 2298 * @mtd: mtd info structure 2299 * @chip: nand chip info structure 2300 * @offset: column address of subpage within the page 2301 * @data_len: data length 2302 * @buf: data buffer 2303 * @oob_required: must write chip->oob_poi to OOB 2304 * @page: page number to write 2305 */ 2306 static int nand_write_subpage_hwecc(struct mtd_info *mtd, 2307 struct nand_chip *chip, uint32_t offset, 2308 uint32_t data_len, const uint8_t *buf, 2309 int oob_required, int page) 2310 { 2311 uint8_t *oob_buf = chip->oob_poi; 2312 uint8_t *ecc_calc = chip->buffers->ecccalc; 2313 int ecc_size = chip->ecc.size; 2314 int ecc_bytes = chip->ecc.bytes; 2315 int ecc_steps = chip->ecc.steps; 2316 uint32_t *eccpos = chip->ecc.layout->eccpos; 2317 uint32_t start_step = offset / ecc_size; 2318 uint32_t end_step = (offset + data_len - 1) / ecc_size; 2319 int oob_bytes = mtd->oobsize / ecc_steps; 2320 int step, i; 2321 2322 for (step = 0; step < ecc_steps; step++) { 2323 /* configure controller for WRITE access */ 2324 chip->ecc.hwctl(mtd, NAND_ECC_WRITE); 2325 2326 /* write data (untouched subpages already masked by 0xFF) */ 2327 chip->write_buf(mtd, buf, ecc_size); 2328 2329 /* mask ECC of un-touched subpages by padding 0xFF */ 2330 if ((step < start_step) || (step > end_step)) 2331 memset(ecc_calc, 0xff, ecc_bytes); 2332 else 2333 chip->ecc.calculate(mtd, buf, ecc_calc); 2334 2335 /* mask OOB of un-touched subpages by padding 0xFF */ 2336 /* if oob_required, preserve OOB metadata of written subpage */ 2337 if (!oob_required || (step < start_step) || (step > end_step)) 2338 memset(oob_buf, 0xff, oob_bytes); 2339 2340 buf += ecc_size; 2341 ecc_calc += ecc_bytes; 2342 oob_buf += oob_bytes; 2343 } 2344 2345 /* copy calculated ECC for whole page to chip->buffer->oob */ 2346 /* this include masked-value(0xFF) for unwritten subpages */ 2347 ecc_calc = chip->buffers->ecccalc; 2348 for (i = 0; i < chip->ecc.total; i++) 2349 chip->oob_poi[eccpos[i]] = ecc_calc[i]; 2350 2351 /* write OOB buffer to NAND device */ 2352 chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); 2353 2354 return 0; 2355 } 2356 2357 2358 /** 2359 * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write 2360 * @mtd: mtd info structure 2361 * @chip: nand chip info structure 2362 * @buf: data buffer 2363 * @oob_required: must write chip->oob_poi to OOB 2364 * @page: page number to write 2365 * 2366 * The hw generator calculates the error syndrome automatically. Therefore we 2367 * need a special oob layout and handling. 2368 */ 2369 static int nand_write_page_syndrome(struct mtd_info *mtd, 2370 struct nand_chip *chip, 2371 const uint8_t *buf, int oob_required, 2372 int page) 2373 { 2374 int i, eccsize = chip->ecc.size; 2375 int eccbytes = chip->ecc.bytes; 2376 int eccsteps = chip->ecc.steps; 2377 const uint8_t *p = buf; 2378 uint8_t *oob = chip->oob_poi; 2379 2380 for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { 2381 2382 chip->ecc.hwctl(mtd, NAND_ECC_WRITE); 2383 chip->write_buf(mtd, p, eccsize); 2384 2385 if (chip->ecc.prepad) { 2386 chip->write_buf(mtd, oob, chip->ecc.prepad); 2387 oob += chip->ecc.prepad; 2388 } 2389 2390 chip->ecc.calculate(mtd, p, oob); 2391 chip->write_buf(mtd, oob, eccbytes); 2392 oob += eccbytes; 2393 2394 if (chip->ecc.postpad) { 2395 chip->write_buf(mtd, oob, chip->ecc.postpad); 2396 oob += chip->ecc.postpad; 2397 } 2398 } 2399 2400 /* Calculate remaining oob bytes */ 2401 i = mtd->oobsize - (oob - chip->oob_poi); 2402 if (i) 2403 chip->write_buf(mtd, oob, i); 2404 2405 return 0; 2406 } 2407 2408 /** 2409 * nand_write_page - [REPLACEABLE] write one page 2410 * @mtd: MTD device structure 2411 * @chip: NAND chip descriptor 2412 * @offset: address offset within the page 2413 * @data_len: length of actual data to be written 2414 * @buf: the data to write 2415 * @oob_required: must write chip->oob_poi to OOB 2416 * @page: page number to write 2417 * @raw: use _raw version of write_page 2418 */ 2419 static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, 2420 uint32_t offset, int data_len, const uint8_t *buf, 2421 int oob_required, int page, int raw) 2422 { 2423 int status, subpage; 2424 2425 if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && 2426 chip->ecc.write_subpage) 2427 subpage = offset || (data_len < mtd->writesize); 2428 else 2429 subpage = 0; 2430 2431 if (nand_standard_page_accessors(&chip->ecc)) 2432 chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); 2433 2434 if (unlikely(raw)) 2435 status = chip->ecc.write_page_raw(mtd, chip, buf, 2436 oob_required, page); 2437 else if (subpage) 2438 status = chip->ecc.write_subpage(mtd, chip, offset, data_len, 2439 buf, oob_required, page); 2440 else 2441 status = chip->ecc.write_page(mtd, chip, buf, oob_required, 2442 page); 2443 2444 if (status < 0) 2445 return status; 2446 2447 if (nand_standard_page_accessors(&chip->ecc)) { 2448 chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); 2449 2450 status = chip->waitfunc(mtd, chip); 2451 if (status & NAND_STATUS_FAIL) 2452 return -EIO; 2453 } 2454 2455 return 0; 2456 } 2457 2458 /** 2459 * nand_fill_oob - [INTERN] Transfer client buffer to oob 2460 * @mtd: MTD device structure 2461 * @oob: oob data buffer 2462 * @len: oob data write length 2463 * @ops: oob ops structure 2464 */ 2465 static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len, 2466 struct mtd_oob_ops *ops) 2467 { 2468 struct nand_chip *chip = mtd_to_nand(mtd); 2469 2470 /* 2471 * Initialise to all 0xFF, to avoid the possibility of left over OOB 2472 * data from a previous OOB read. 2473 */ 2474 memset(chip->oob_poi, 0xff, mtd->oobsize); 2475 2476 switch (ops->mode) { 2477 2478 case MTD_OPS_PLACE_OOB: 2479 case MTD_OPS_RAW: 2480 memcpy(chip->oob_poi + ops->ooboffs, oob, len); 2481 return oob + len; 2482 2483 case MTD_OPS_AUTO_OOB: { 2484 struct nand_oobfree *free = chip->ecc.layout->oobfree; 2485 uint32_t boffs = 0, woffs = ops->ooboffs; 2486 size_t bytes = 0; 2487 2488 for (; free->length && len; free++, len -= bytes) { 2489 /* Write request not from offset 0? */ 2490 if (unlikely(woffs)) { 2491 if (woffs >= free->length) { 2492 woffs -= free->length; 2493 continue; 2494 } 2495 boffs = free->offset + woffs; 2496 bytes = min_t(size_t, len, 2497 (free->length - woffs)); 2498 woffs = 0; 2499 } else { 2500 bytes = min_t(size_t, len, free->length); 2501 boffs = free->offset; 2502 } 2503 memcpy(chip->oob_poi + boffs, oob, bytes); 2504 oob += bytes; 2505 } 2506 return oob; 2507 } 2508 default: 2509 BUG(); 2510 } 2511 return NULL; 2512 } 2513 2514 #define NOTALIGNED(x) ((x & (chip->subpagesize - 1)) != 0) 2515 2516 /** 2517 * nand_do_write_ops - [INTERN] NAND write with ECC 2518 * @mtd: MTD device structure 2519 * @to: offset to write to 2520 * @ops: oob operations description structure 2521 * 2522 * NAND write with ECC. 2523 */ 2524 static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, 2525 struct mtd_oob_ops *ops) 2526 { 2527 int chipnr, realpage, page, column; 2528 struct nand_chip *chip = mtd_to_nand(mtd); 2529 uint32_t writelen = ops->len; 2530 2531 uint32_t oobwritelen = ops->ooblen; 2532 uint32_t oobmaxlen = mtd_oobavail(mtd, ops); 2533 2534 uint8_t *oob = ops->oobbuf; 2535 uint8_t *buf = ops->datbuf; 2536 int ret; 2537 int oob_required = oob ? 1 : 0; 2538 2539 ops->retlen = 0; 2540 if (!writelen) 2541 return 0; 2542 2543 /* Reject writes, which are not page aligned */ 2544 if (NOTALIGNED(to)) { 2545 pr_notice("%s: attempt to write non page aligned data\n", 2546 __func__); 2547 return -EINVAL; 2548 } 2549 2550 column = to & (mtd->writesize - 1); 2551 2552 chipnr = (int)(to >> chip->chip_shift); 2553 chip->select_chip(mtd, chipnr); 2554 2555 /* Check, if it is write protected */ 2556 if (nand_check_wp(mtd)) { 2557 ret = -EIO; 2558 goto err_out; 2559 } 2560 2561 realpage = (int)(to >> chip->page_shift); 2562 page = realpage & chip->pagemask; 2563 2564 /* Invalidate the page cache, when we write to the cached page */ 2565 if (to <= ((loff_t)chip->pagebuf << chip->page_shift) && 2566 ((loff_t)chip->pagebuf << chip->page_shift) < (to + ops->len)) 2567 chip->pagebuf = -1; 2568 2569 /* Don't allow multipage oob writes with offset */ 2570 if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen)) { 2571 ret = -EINVAL; 2572 goto err_out; 2573 } 2574 2575 while (1) { 2576 int bytes = mtd->writesize; 2577 uint8_t *wbuf = buf; 2578 int use_bufpoi; 2579 int part_pagewr = (column || writelen < mtd->writesize); 2580 2581 if (part_pagewr) 2582 use_bufpoi = 1; 2583 else if (chip->options & NAND_USE_BOUNCE_BUFFER) 2584 use_bufpoi = !IS_ALIGNED((unsigned long)buf, 2585 chip->buf_align); 2586 else 2587 use_bufpoi = 0; 2588 2589 WATCHDOG_RESET(); 2590 /* Partial page write?, or need to use bounce buffer */ 2591 if (use_bufpoi) { 2592 pr_debug("%s: using write bounce buffer for buf@%p\n", 2593 __func__, buf); 2594 if (part_pagewr) 2595 bytes = min_t(int, bytes - column, writelen); 2596 chip->pagebuf = -1; 2597 memset(chip->buffers->databuf, 0xff, mtd->writesize); 2598 memcpy(&chip->buffers->databuf[column], buf, bytes); 2599 wbuf = chip->buffers->databuf; 2600 } 2601 2602 if (unlikely(oob)) { 2603 size_t len = min(oobwritelen, oobmaxlen); 2604 oob = nand_fill_oob(mtd, oob, len, ops); 2605 oobwritelen -= len; 2606 } else { 2607 /* We still need to erase leftover OOB data */ 2608 memset(chip->oob_poi, 0xff, mtd->oobsize); 2609 } 2610 ret = chip->write_page(mtd, chip, column, bytes, wbuf, 2611 oob_required, page, 2612 (ops->mode == MTD_OPS_RAW)); 2613 if (ret) 2614 break; 2615 2616 writelen -= bytes; 2617 if (!writelen) 2618 break; 2619 2620 column = 0; 2621 buf += bytes; 2622 realpage++; 2623 2624 page = realpage & chip->pagemask; 2625 /* Check, if we cross a chip boundary */ 2626 if (!page) { 2627 chipnr++; 2628 chip->select_chip(mtd, -1); 2629 chip->select_chip(mtd, chipnr); 2630 } 2631 } 2632 2633 ops->retlen = ops->len - writelen; 2634 if (unlikely(oob)) 2635 ops->oobretlen = ops->ooblen; 2636 2637 err_out: 2638 chip->select_chip(mtd, -1); 2639 return ret; 2640 } 2641 2642 /** 2643 * panic_nand_write - [MTD Interface] NAND write with ECC 2644 * @mtd: MTD device structure 2645 * @to: offset to write to 2646 * @len: number of bytes to write 2647 * @retlen: pointer to variable to store the number of written bytes 2648 * @buf: the data to write 2649 * 2650 * NAND write with ECC. Used when performing writes in interrupt context, this 2651 * may for example be called by mtdoops when writing an oops while in panic. 2652 */ 2653 static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, 2654 size_t *retlen, const uint8_t *buf) 2655 { 2656 struct nand_chip *chip = mtd_to_nand(mtd); 2657 struct mtd_oob_ops ops; 2658 int ret; 2659 2660 /* Wait for the device to get ready */ 2661 panic_nand_wait(mtd, chip, 400); 2662 2663 /* Grab the device */ 2664 panic_nand_get_device(chip, mtd, FL_WRITING); 2665 2666 memset(&ops, 0, sizeof(ops)); 2667 ops.len = len; 2668 ops.datbuf = (uint8_t *)buf; 2669 ops.mode = MTD_OPS_PLACE_OOB; 2670 2671 ret = nand_do_write_ops(mtd, to, &ops); 2672 2673 *retlen = ops.retlen; 2674 return ret; 2675 } 2676 2677 /** 2678 * nand_write - [MTD Interface] NAND write with ECC 2679 * @mtd: MTD device structure 2680 * @to: offset to write to 2681 * @len: number of bytes to write 2682 * @retlen: pointer to variable to store the number of written bytes 2683 * @buf: the data to write 2684 * 2685 * NAND write with ECC. 2686 */ 2687 static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, 2688 size_t *retlen, const uint8_t *buf) 2689 { 2690 struct mtd_oob_ops ops; 2691 int ret; 2692 2693 nand_get_device(mtd, FL_WRITING); 2694 memset(&ops, 0, sizeof(ops)); 2695 ops.len = len; 2696 ops.datbuf = (uint8_t *)buf; 2697 ops.mode = MTD_OPS_PLACE_OOB; 2698 ret = nand_do_write_ops(mtd, to, &ops); 2699 *retlen = ops.retlen; 2700 nand_release_device(mtd); 2701 return ret; 2702 } 2703 2704 /** 2705 * nand_do_write_oob - [MTD Interface] NAND write out-of-band 2706 * @mtd: MTD device structure 2707 * @to: offset to write to 2708 * @ops: oob operation description structure 2709 * 2710 * NAND write out-of-band. 2711 */ 2712 static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, 2713 struct mtd_oob_ops *ops) 2714 { 2715 int chipnr, page, status, len; 2716 struct nand_chip *chip = mtd_to_nand(mtd); 2717 2718 pr_debug("%s: to = 0x%08x, len = %i\n", 2719 __func__, (unsigned int)to, (int)ops->ooblen); 2720 2721 len = mtd_oobavail(mtd, ops); 2722 2723 /* Do not allow write past end of page */ 2724 if ((ops->ooboffs + ops->ooblen) > len) { 2725 pr_debug("%s: attempt to write past end of page\n", 2726 __func__); 2727 return -EINVAL; 2728 } 2729 2730 if (unlikely(ops->ooboffs >= len)) { 2731 pr_debug("%s: attempt to start write outside oob\n", 2732 __func__); 2733 return -EINVAL; 2734 } 2735 2736 /* Do not allow write past end of device */ 2737 if (unlikely(to >= mtd->size || 2738 ops->ooboffs + ops->ooblen > 2739 ((mtd->size >> chip->page_shift) - 2740 (to >> chip->page_shift)) * len)) { 2741 pr_debug("%s: attempt to write beyond end of device\n", 2742 __func__); 2743 return -EINVAL; 2744 } 2745 2746 chipnr = (int)(to >> chip->chip_shift); 2747 2748 /* 2749 * Reset the chip. Some chips (like the Toshiba TC5832DC found in one 2750 * of my DiskOnChip 2000 test units) will clear the whole data page too 2751 * if we don't do this. I have no clue why, but I seem to have 'fixed' 2752 * it in the doc2000 driver in August 1999. dwmw2. 2753 */ 2754 nand_reset(chip, chipnr); 2755 2756 chip->select_chip(mtd, chipnr); 2757 2758 /* Shift to get page */ 2759 page = (int)(to >> chip->page_shift); 2760 2761 /* Check, if it is write protected */ 2762 if (nand_check_wp(mtd)) { 2763 chip->select_chip(mtd, -1); 2764 return -EROFS; 2765 } 2766 2767 /* Invalidate the page cache, if we write to the cached page */ 2768 if (page == chip->pagebuf) 2769 chip->pagebuf = -1; 2770 2771 nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops); 2772 2773 if (ops->mode == MTD_OPS_RAW) 2774 status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask); 2775 else 2776 status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask); 2777 2778 chip->select_chip(mtd, -1); 2779 2780 if (status) 2781 return status; 2782 2783 ops->oobretlen = ops->ooblen; 2784 2785 return 0; 2786 } 2787 2788 /** 2789 * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band 2790 * @mtd: MTD device structure 2791 * @to: offset to write to 2792 * @ops: oob operation description structure 2793 */ 2794 static int nand_write_oob(struct mtd_info *mtd, loff_t to, 2795 struct mtd_oob_ops *ops) 2796 { 2797 int ret = -ENOTSUPP; 2798 2799 ops->retlen = 0; 2800 2801 /* Do not allow writes past end of device */ 2802 if (ops->datbuf && (to + ops->len) > mtd->size) { 2803 pr_debug("%s: attempt to write beyond end of device\n", 2804 __func__); 2805 return -EINVAL; 2806 } 2807 2808 nand_get_device(mtd, FL_WRITING); 2809 2810 switch (ops->mode) { 2811 case MTD_OPS_PLACE_OOB: 2812 case MTD_OPS_AUTO_OOB: 2813 case MTD_OPS_RAW: 2814 break; 2815 2816 default: 2817 goto out; 2818 } 2819 2820 if (!ops->datbuf) 2821 ret = nand_do_write_oob(mtd, to, ops); 2822 else 2823 ret = nand_do_write_ops(mtd, to, ops); 2824 2825 out: 2826 nand_release_device(mtd); 2827 return ret; 2828 } 2829 2830 /** 2831 * single_erase - [GENERIC] NAND standard block erase command function 2832 * @mtd: MTD device structure 2833 * @page: the page address of the block which will be erased 2834 * 2835 * Standard erase command for NAND chips. Returns NAND status. 2836 */ 2837 static int single_erase(struct mtd_info *mtd, int page) 2838 { 2839 struct nand_chip *chip = mtd_to_nand(mtd); 2840 /* Send commands to erase a block */ 2841 chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); 2842 chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); 2843 2844 return chip->waitfunc(mtd, chip); 2845 } 2846 2847 /** 2848 * nand_erase - [MTD Interface] erase block(s) 2849 * @mtd: MTD device structure 2850 * @instr: erase instruction 2851 * 2852 * Erase one ore more blocks. 2853 */ 2854 static int nand_erase(struct mtd_info *mtd, struct erase_info *instr) 2855 { 2856 return nand_erase_nand(mtd, instr, 0); 2857 } 2858 2859 /** 2860 * nand_erase_nand - [INTERN] erase block(s) 2861 * @mtd: MTD device structure 2862 * @instr: erase instruction 2863 * @allowbbt: allow erasing the bbt area 2864 * 2865 * Erase one ore more blocks. 2866 */ 2867 int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, 2868 int allowbbt) 2869 { 2870 int page, status, pages_per_block, ret, chipnr; 2871 struct nand_chip *chip = mtd_to_nand(mtd); 2872 loff_t len; 2873 2874 pr_debug("%s: start = 0x%012llx, len = %llu\n", 2875 __func__, (unsigned long long)instr->addr, 2876 (unsigned long long)instr->len); 2877 2878 if (check_offs_len(mtd, instr->addr, instr->len)) 2879 return -EINVAL; 2880 2881 /* Grab the lock and see if the device is available */ 2882 nand_get_device(mtd, FL_ERASING); 2883 2884 /* Shift to get first page */ 2885 page = (int)(instr->addr >> chip->page_shift); 2886 chipnr = (int)(instr->addr >> chip->chip_shift); 2887 2888 /* Calculate pages in each block */ 2889 pages_per_block = 1 << (chip->phys_erase_shift - chip->page_shift); 2890 2891 /* Select the NAND device */ 2892 chip->select_chip(mtd, chipnr); 2893 2894 /* Check, if it is write protected */ 2895 if (nand_check_wp(mtd)) { 2896 pr_debug("%s: device is write protected!\n", 2897 __func__); 2898 instr->state = MTD_ERASE_FAILED; 2899 goto erase_exit; 2900 } 2901 2902 /* Loop through the pages */ 2903 len = instr->len; 2904 2905 instr->state = MTD_ERASING; 2906 2907 while (len) { 2908 WATCHDOG_RESET(); 2909 2910 /* Check if we have a bad block, we do not erase bad blocks! */ 2911 if (!instr->scrub && nand_block_checkbad(mtd, ((loff_t) page) << 2912 chip->page_shift, allowbbt)) { 2913 pr_warn("%s: attempt to erase a bad block at page 0x%08x\n", 2914 __func__, page); 2915 instr->state = MTD_ERASE_FAILED; 2916 goto erase_exit; 2917 } 2918 2919 /* 2920 * Invalidate the page cache, if we erase the block which 2921 * contains the current cached page. 2922 */ 2923 if (page <= chip->pagebuf && chip->pagebuf < 2924 (page + pages_per_block)) 2925 chip->pagebuf = -1; 2926 2927 status = chip->erase(mtd, page & chip->pagemask); 2928 2929 /* See if block erase succeeded */ 2930 if (status & NAND_STATUS_FAIL) { 2931 pr_debug("%s: failed erase, page 0x%08x\n", 2932 __func__, page); 2933 instr->state = MTD_ERASE_FAILED; 2934 instr->fail_addr = 2935 ((loff_t)page << chip->page_shift); 2936 goto erase_exit; 2937 } 2938 2939 /* Increment page address and decrement length */ 2940 len -= (1ULL << chip->phys_erase_shift); 2941 page += pages_per_block; 2942 2943 /* Check, if we cross a chip boundary */ 2944 if (len && !(page & chip->pagemask)) { 2945 chipnr++; 2946 chip->select_chip(mtd, -1); 2947 chip->select_chip(mtd, chipnr); 2948 } 2949 } 2950 instr->state = MTD_ERASE_DONE; 2951 2952 erase_exit: 2953 2954 ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; 2955 2956 /* Deselect and wake up anyone waiting on the device */ 2957 chip->select_chip(mtd, -1); 2958 nand_release_device(mtd); 2959 2960 /* Do call back function */ 2961 if (!ret) 2962 mtd_erase_callback(instr); 2963 2964 /* Return more or less happy */ 2965 return ret; 2966 } 2967 2968 /** 2969 * nand_sync - [MTD Interface] sync 2970 * @mtd: MTD device structure 2971 * 2972 * Sync is actually a wait for chip ready function. 2973 */ 2974 static void nand_sync(struct mtd_info *mtd) 2975 { 2976 pr_debug("%s: called\n", __func__); 2977 2978 /* Grab the lock and see if the device is available */ 2979 nand_get_device(mtd, FL_SYNCING); 2980 /* Release it and go back */ 2981 nand_release_device(mtd); 2982 } 2983 2984 /** 2985 * nand_block_isbad - [MTD Interface] Check if block at offset is bad 2986 * @mtd: MTD device structure 2987 * @offs: offset relative to mtd start 2988 */ 2989 static int nand_block_isbad(struct mtd_info *mtd, loff_t offs) 2990 { 2991 struct nand_chip *chip = mtd_to_nand(mtd); 2992 int chipnr = (int)(offs >> chip->chip_shift); 2993 int ret; 2994 2995 /* Select the NAND device */ 2996 nand_get_device(mtd, FL_READING); 2997 chip->select_chip(mtd, chipnr); 2998 2999 ret = nand_block_checkbad(mtd, offs, 0); 3000 3001 chip->select_chip(mtd, -1); 3002 nand_release_device(mtd); 3003 3004 return ret; 3005 } 3006 3007 /** 3008 * nand_block_markbad - [MTD Interface] Mark block at the given offset as bad 3009 * @mtd: MTD device structure 3010 * @ofs: offset relative to mtd start 3011 */ 3012 static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs) 3013 { 3014 int ret; 3015 3016 ret = nand_block_isbad(mtd, ofs); 3017 if (ret) { 3018 /* If it was bad already, return success and do nothing */ 3019 if (ret > 0) 3020 return 0; 3021 return ret; 3022 } 3023 3024 return nand_block_markbad_lowlevel(mtd, ofs); 3025 } 3026 3027 /** 3028 * nand_onfi_set_features- [REPLACEABLE] set features for ONFI nand 3029 * @mtd: MTD device structure 3030 * @chip: nand chip info structure 3031 * @addr: feature address. 3032 * @subfeature_param: the subfeature parameters, a four bytes array. 3033 */ 3034 static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip, 3035 int addr, uint8_t *subfeature_param) 3036 { 3037 int status; 3038 int i; 3039 3040 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION 3041 if (!chip->onfi_version || 3042 !(le16_to_cpu(chip->onfi_params.opt_cmd) 3043 & ONFI_OPT_CMD_SET_GET_FEATURES)) 3044 return -EINVAL; 3045 #endif 3046 3047 chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, addr, -1); 3048 for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i) 3049 chip->write_byte(mtd, subfeature_param[i]); 3050 3051 status = chip->waitfunc(mtd, chip); 3052 if (status & NAND_STATUS_FAIL) 3053 return -EIO; 3054 return 0; 3055 } 3056 3057 /** 3058 * nand_onfi_get_features- [REPLACEABLE] get features for ONFI nand 3059 * @mtd: MTD device structure 3060 * @chip: nand chip info structure 3061 * @addr: feature address. 3062 * @subfeature_param: the subfeature parameters, a four bytes array. 3063 */ 3064 static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip, 3065 int addr, uint8_t *subfeature_param) 3066 { 3067 int i; 3068 3069 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION 3070 if (!chip->onfi_version || 3071 !(le16_to_cpu(chip->onfi_params.opt_cmd) 3072 & ONFI_OPT_CMD_SET_GET_FEATURES)) 3073 return -EINVAL; 3074 #endif 3075 3076 chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, addr, -1); 3077 for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i) 3078 *subfeature_param++ = chip->read_byte(mtd); 3079 return 0; 3080 } 3081 3082 /* Set default functions */ 3083 static void nand_set_defaults(struct nand_chip *chip, int busw) 3084 { 3085 /* check for proper chip_delay setup, set 20us if not */ 3086 if (!chip->chip_delay) 3087 chip->chip_delay = 20; 3088 3089 /* check, if a user supplied command function given */ 3090 if (chip->cmdfunc == NULL) 3091 chip->cmdfunc = nand_command; 3092 3093 /* check, if a user supplied wait function given */ 3094 if (chip->waitfunc == NULL) 3095 chip->waitfunc = nand_wait; 3096 3097 if (!chip->select_chip) 3098 chip->select_chip = nand_select_chip; 3099 3100 /* set for ONFI nand */ 3101 if (!chip->onfi_set_features) 3102 chip->onfi_set_features = nand_onfi_set_features; 3103 if (!chip->onfi_get_features) 3104 chip->onfi_get_features = nand_onfi_get_features; 3105 3106 /* If called twice, pointers that depend on busw may need to be reset */ 3107 if (!chip->read_byte || chip->read_byte == nand_read_byte) 3108 chip->read_byte = busw ? nand_read_byte16 : nand_read_byte; 3109 if (!chip->read_word) 3110 chip->read_word = nand_read_word; 3111 if (!chip->block_bad) 3112 chip->block_bad = nand_block_bad; 3113 if (!chip->block_markbad) 3114 chip->block_markbad = nand_default_block_markbad; 3115 if (!chip->write_buf || chip->write_buf == nand_write_buf) 3116 chip->write_buf = busw ? nand_write_buf16 : nand_write_buf; 3117 if (!chip->write_byte || chip->write_byte == nand_write_byte) 3118 chip->write_byte = busw ? nand_write_byte16 : nand_write_byte; 3119 if (!chip->read_buf || chip->read_buf == nand_read_buf) 3120 chip->read_buf = busw ? nand_read_buf16 : nand_read_buf; 3121 if (!chip->scan_bbt) 3122 chip->scan_bbt = nand_default_bbt; 3123 3124 if (!chip->controller) { 3125 chip->controller = &chip->hwcontrol; 3126 spin_lock_init(&chip->controller->lock); 3127 init_waitqueue_head(&chip->controller->wq); 3128 } 3129 3130 if (!chip->buf_align) 3131 chip->buf_align = 1; 3132 } 3133 3134 /* Sanitize ONFI strings so we can safely print them */ 3135 static void sanitize_string(char *s, size_t len) 3136 { 3137 ssize_t i; 3138 3139 /* Null terminate */ 3140 s[len - 1] = 0; 3141 3142 /* Remove non printable chars */ 3143 for (i = 0; i < len - 1; i++) { 3144 if (s[i] < ' ' || s[i] > 127) 3145 s[i] = '?'; 3146 } 3147 3148 /* Remove trailing spaces */ 3149 strim(s); 3150 } 3151 3152 static u16 onfi_crc16(u16 crc, u8 const *p, size_t len) 3153 { 3154 int i; 3155 while (len--) { 3156 crc ^= *p++ << 8; 3157 for (i = 0; i < 8; i++) 3158 crc = (crc << 1) ^ ((crc & 0x8000) ? 0x8005 : 0); 3159 } 3160 3161 return crc; 3162 } 3163 3164 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION 3165 /* Parse the Extended Parameter Page. */ 3166 static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, 3167 struct nand_chip *chip, struct nand_onfi_params *p) 3168 { 3169 struct onfi_ext_param_page *ep; 3170 struct onfi_ext_section *s; 3171 struct onfi_ext_ecc_info *ecc; 3172 uint8_t *cursor; 3173 int ret = -EINVAL; 3174 int len; 3175 int i; 3176 3177 len = le16_to_cpu(p->ext_param_page_length) * 16; 3178 ep = kmalloc(len, GFP_KERNEL); 3179 if (!ep) 3180 return -ENOMEM; 3181 3182 /* Send our own NAND_CMD_PARAM. */ 3183 chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); 3184 3185 /* Use the Change Read Column command to skip the ONFI param pages. */ 3186 chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 3187 sizeof(*p) * p->num_of_param_pages , -1); 3188 3189 /* Read out the Extended Parameter Page. */ 3190 chip->read_buf(mtd, (uint8_t *)ep, len); 3191 if ((onfi_crc16(ONFI_CRC_BASE, ((uint8_t *)ep) + 2, len - 2) 3192 != le16_to_cpu(ep->crc))) { 3193 pr_debug("fail in the CRC.\n"); 3194 goto ext_out; 3195 } 3196 3197 /* 3198 * Check the signature. 3199 * Do not strictly follow the ONFI spec, maybe changed in future. 3200 */ 3201 if (strncmp((char *)ep->sig, "EPPS", 4)) { 3202 pr_debug("The signature is invalid.\n"); 3203 goto ext_out; 3204 } 3205 3206 /* find the ECC section. */ 3207 cursor = (uint8_t *)(ep + 1); 3208 for (i = 0; i < ONFI_EXT_SECTION_MAX; i++) { 3209 s = ep->sections + i; 3210 if (s->type == ONFI_SECTION_TYPE_2) 3211 break; 3212 cursor += s->length * 16; 3213 } 3214 if (i == ONFI_EXT_SECTION_MAX) { 3215 pr_debug("We can not find the ECC section.\n"); 3216 goto ext_out; 3217 } 3218 3219 /* get the info we want. */ 3220 ecc = (struct onfi_ext_ecc_info *)cursor; 3221 3222 if (!ecc->codeword_size) { 3223 pr_debug("Invalid codeword size\n"); 3224 goto ext_out; 3225 } 3226 3227 chip->ecc_strength_ds = ecc->ecc_bits; 3228 chip->ecc_step_ds = 1 << ecc->codeword_size; 3229 ret = 0; 3230 3231 ext_out: 3232 kfree(ep); 3233 return ret; 3234 } 3235 3236 static int nand_setup_read_retry_micron(struct mtd_info *mtd, int retry_mode) 3237 { 3238 struct nand_chip *chip = mtd_to_nand(mtd); 3239 uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode}; 3240 3241 return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY, 3242 feature); 3243 } 3244 3245 /* 3246 * Configure chip properties from Micron vendor-specific ONFI table 3247 */ 3248 static void nand_onfi_detect_micron(struct nand_chip *chip, 3249 struct nand_onfi_params *p) 3250 { 3251 struct nand_onfi_vendor_micron *micron = (void *)p->vendor; 3252 3253 if (le16_to_cpu(p->vendor_revision) < 1) 3254 return; 3255 3256 chip->read_retries = micron->read_retry_options; 3257 chip->setup_read_retry = nand_setup_read_retry_micron; 3258 } 3259 3260 /* 3261 * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise. 3262 */ 3263 static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, 3264 int *busw) 3265 { 3266 struct nand_onfi_params *p = &chip->onfi_params; 3267 int i, j; 3268 int val; 3269 3270 /* Try ONFI for unknown chip or LP */ 3271 chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1); 3272 if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' || 3273 chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I') 3274 return 0; 3275 3276 chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); 3277 for (i = 0; i < 3; i++) { 3278 for (j = 0; j < sizeof(*p); j++) 3279 ((uint8_t *)p)[j] = chip->read_byte(mtd); 3280 if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) == 3281 le16_to_cpu(p->crc)) { 3282 break; 3283 } 3284 } 3285 3286 if (i == 3) { 3287 pr_err("Could not find valid ONFI parameter page; aborting\n"); 3288 return 0; 3289 } 3290 3291 /* Check version */ 3292 val = le16_to_cpu(p->revision); 3293 if (val & (1 << 5)) 3294 chip->onfi_version = 23; 3295 else if (val & (1 << 4)) 3296 chip->onfi_version = 22; 3297 else if (val & (1 << 3)) 3298 chip->onfi_version = 21; 3299 else if (val & (1 << 2)) 3300 chip->onfi_version = 20; 3301 else if (val & (1 << 1)) 3302 chip->onfi_version = 10; 3303 3304 if (!chip->onfi_version) { 3305 pr_info("unsupported ONFI version: %d\n", val); 3306 return 0; 3307 } 3308 3309 sanitize_string(p->manufacturer, sizeof(p->manufacturer)); 3310 sanitize_string(p->model, sizeof(p->model)); 3311 if (!mtd->name) 3312 mtd->name = p->model; 3313 3314 mtd->writesize = le32_to_cpu(p->byte_per_page); 3315 3316 /* 3317 * pages_per_block and blocks_per_lun may not be a power-of-2 size 3318 * (don't ask me who thought of this...). MTD assumes that these 3319 * dimensions will be power-of-2, so just truncate the remaining area. 3320 */ 3321 mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1); 3322 mtd->erasesize *= mtd->writesize; 3323 3324 mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page); 3325 3326 /* See erasesize comment */ 3327 chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1); 3328 chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count; 3329 chip->bits_per_cell = p->bits_per_cell; 3330 3331 if (onfi_feature(chip) & ONFI_FEATURE_16_BIT_BUS) 3332 *busw = NAND_BUSWIDTH_16; 3333 else 3334 *busw = 0; 3335 3336 if (p->ecc_bits != 0xff) { 3337 chip->ecc_strength_ds = p->ecc_bits; 3338 chip->ecc_step_ds = 512; 3339 } else if (chip->onfi_version >= 21 && 3340 (onfi_feature(chip) & ONFI_FEATURE_EXT_PARAM_PAGE)) { 3341 3342 /* 3343 * The nand_flash_detect_ext_param_page() uses the 3344 * Change Read Column command which maybe not supported 3345 * by the chip->cmdfunc. So try to update the chip->cmdfunc 3346 * now. We do not replace user supplied command function. 3347 */ 3348 if (mtd->writesize > 512 && chip->cmdfunc == nand_command) 3349 chip->cmdfunc = nand_command_lp; 3350 3351 /* The Extended Parameter Page is supported since ONFI 2.1. */ 3352 if (nand_flash_detect_ext_param_page(mtd, chip, p)) 3353 pr_warn("Failed to detect ONFI extended param page\n"); 3354 } else { 3355 pr_warn("Could not retrieve ONFI ECC requirements\n"); 3356 } 3357 3358 if (p->jedec_id == NAND_MFR_MICRON) 3359 nand_onfi_detect_micron(chip, p); 3360 3361 return 1; 3362 } 3363 #else 3364 static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, 3365 int *busw) 3366 { 3367 return 0; 3368 } 3369 #endif 3370 3371 /* 3372 * Check if the NAND chip is JEDEC compliant, returns 1 if it is, 0 otherwise. 3373 */ 3374 static int nand_flash_detect_jedec(struct mtd_info *mtd, struct nand_chip *chip, 3375 int *busw) 3376 { 3377 struct nand_jedec_params *p = &chip->jedec_params; 3378 struct jedec_ecc_info *ecc; 3379 int val; 3380 int i, j; 3381 3382 /* Try JEDEC for unknown chip or LP */ 3383 chip->cmdfunc(mtd, NAND_CMD_READID, 0x40, -1); 3384 if (chip->read_byte(mtd) != 'J' || chip->read_byte(mtd) != 'E' || 3385 chip->read_byte(mtd) != 'D' || chip->read_byte(mtd) != 'E' || 3386 chip->read_byte(mtd) != 'C') 3387 return 0; 3388 3389 chip->cmdfunc(mtd, NAND_CMD_PARAM, 0x40, -1); 3390 for (i = 0; i < 3; i++) { 3391 for (j = 0; j < sizeof(*p); j++) 3392 ((uint8_t *)p)[j] = chip->read_byte(mtd); 3393 3394 if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 510) == 3395 le16_to_cpu(p->crc)) 3396 break; 3397 } 3398 3399 if (i == 3) { 3400 pr_err("Could not find valid JEDEC parameter page; aborting\n"); 3401 return 0; 3402 } 3403 3404 /* Check version */ 3405 val = le16_to_cpu(p->revision); 3406 if (val & (1 << 2)) 3407 chip->jedec_version = 10; 3408 else if (val & (1 << 1)) 3409 chip->jedec_version = 1; /* vendor specific version */ 3410 3411 if (!chip->jedec_version) { 3412 pr_info("unsupported JEDEC version: %d\n", val); 3413 return 0; 3414 } 3415 3416 sanitize_string(p->manufacturer, sizeof(p->manufacturer)); 3417 sanitize_string(p->model, sizeof(p->model)); 3418 if (!mtd->name) 3419 mtd->name = p->model; 3420 3421 mtd->writesize = le32_to_cpu(p->byte_per_page); 3422 3423 /* Please reference to the comment for nand_flash_detect_onfi. */ 3424 mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1); 3425 mtd->erasesize *= mtd->writesize; 3426 3427 mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page); 3428 3429 /* Please reference to the comment for nand_flash_detect_onfi. */ 3430 chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1); 3431 chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count; 3432 chip->bits_per_cell = p->bits_per_cell; 3433 3434 if (jedec_feature(chip) & JEDEC_FEATURE_16_BIT_BUS) 3435 *busw = NAND_BUSWIDTH_16; 3436 else 3437 *busw = 0; 3438 3439 /* ECC info */ 3440 ecc = &p->ecc_info[0]; 3441 3442 if (ecc->codeword_size >= 9) { 3443 chip->ecc_strength_ds = ecc->ecc_bits; 3444 chip->ecc_step_ds = 1 << ecc->codeword_size; 3445 } else { 3446 pr_warn("Invalid codeword size\n"); 3447 } 3448 3449 return 1; 3450 } 3451 3452 /* 3453 * nand_id_has_period - Check if an ID string has a given wraparound period 3454 * @id_data: the ID string 3455 * @arrlen: the length of the @id_data array 3456 * @period: the period of repitition 3457 * 3458 * Check if an ID string is repeated within a given sequence of bytes at 3459 * specific repetition interval period (e.g., {0x20,0x01,0x7F,0x20} has a 3460 * period of 3). This is a helper function for nand_id_len(). Returns non-zero 3461 * if the repetition has a period of @period; otherwise, returns zero. 3462 */ 3463 static int nand_id_has_period(u8 *id_data, int arrlen, int period) 3464 { 3465 int i, j; 3466 for (i = 0; i < period; i++) 3467 for (j = i + period; j < arrlen; j += period) 3468 if (id_data[i] != id_data[j]) 3469 return 0; 3470 return 1; 3471 } 3472 3473 /* 3474 * nand_id_len - Get the length of an ID string returned by CMD_READID 3475 * @id_data: the ID string 3476 * @arrlen: the length of the @id_data array 3477 3478 * Returns the length of the ID string, according to known wraparound/trailing 3479 * zero patterns. If no pattern exists, returns the length of the array. 3480 */ 3481 static int nand_id_len(u8 *id_data, int arrlen) 3482 { 3483 int last_nonzero, period; 3484 3485 /* Find last non-zero byte */ 3486 for (last_nonzero = arrlen - 1; last_nonzero >= 0; last_nonzero--) 3487 if (id_data[last_nonzero]) 3488 break; 3489 3490 /* All zeros */ 3491 if (last_nonzero < 0) 3492 return 0; 3493 3494 /* Calculate wraparound period */ 3495 for (period = 1; period < arrlen; period++) 3496 if (nand_id_has_period(id_data, arrlen, period)) 3497 break; 3498 3499 /* There's a repeated pattern */ 3500 if (period < arrlen) 3501 return period; 3502 3503 /* There are trailing zeros */ 3504 if (last_nonzero < arrlen - 1) 3505 return last_nonzero + 1; 3506 3507 /* No pattern detected */ 3508 return arrlen; 3509 } 3510 3511 /* Extract the bits of per cell from the 3rd byte of the extended ID */ 3512 static int nand_get_bits_per_cell(u8 cellinfo) 3513 { 3514 int bits; 3515 3516 bits = cellinfo & NAND_CI_CELLTYPE_MSK; 3517 bits >>= NAND_CI_CELLTYPE_SHIFT; 3518 return bits + 1; 3519 } 3520 3521 /* 3522 * Many new NAND share similar device ID codes, which represent the size of the 3523 * chip. The rest of the parameters must be decoded according to generic or 3524 * manufacturer-specific "extended ID" decoding patterns. 3525 */ 3526 static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, 3527 u8 id_data[8], int *busw) 3528 { 3529 int extid, id_len; 3530 /* The 3rd id byte holds MLC / multichip data */ 3531 chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]); 3532 /* The 4th id byte is the important one */ 3533 extid = id_data[3]; 3534 3535 id_len = nand_id_len(id_data, 8); 3536 3537 /* 3538 * Field definitions are in the following datasheets: 3539 * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32) 3540 * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44) 3541 * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22) 3542 * 3543 * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung 3544 * ID to decide what to do. 3545 */ 3546 if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG && 3547 !nand_is_slc(chip) && id_data[5] != 0x00) { 3548 /* Calc pagesize */ 3549 mtd->writesize = 2048 << (extid & 0x03); 3550 extid >>= 2; 3551 /* Calc oobsize */ 3552 switch (((extid >> 2) & 0x04) | (extid & 0x03)) { 3553 case 1: 3554 mtd->oobsize = 128; 3555 break; 3556 case 2: 3557 mtd->oobsize = 218; 3558 break; 3559 case 3: 3560 mtd->oobsize = 400; 3561 break; 3562 case 4: 3563 mtd->oobsize = 436; 3564 break; 3565 case 5: 3566 mtd->oobsize = 512; 3567 break; 3568 case 6: 3569 mtd->oobsize = 640; 3570 break; 3571 case 7: 3572 default: /* Other cases are "reserved" (unknown) */ 3573 mtd->oobsize = 1024; 3574 break; 3575 } 3576 extid >>= 2; 3577 /* Calc blocksize */ 3578 mtd->erasesize = (128 * 1024) << 3579 (((extid >> 1) & 0x04) | (extid & 0x03)); 3580 *busw = 0; 3581 } else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX && 3582 !nand_is_slc(chip)) { 3583 unsigned int tmp; 3584 3585 /* Calc pagesize */ 3586 mtd->writesize = 2048 << (extid & 0x03); 3587 extid >>= 2; 3588 /* Calc oobsize */ 3589 switch (((extid >> 2) & 0x04) | (extid & 0x03)) { 3590 case 0: 3591 mtd->oobsize = 128; 3592 break; 3593 case 1: 3594 mtd->oobsize = 224; 3595 break; 3596 case 2: 3597 mtd->oobsize = 448; 3598 break; 3599 case 3: 3600 mtd->oobsize = 64; 3601 break; 3602 case 4: 3603 mtd->oobsize = 32; 3604 break; 3605 case 5: 3606 mtd->oobsize = 16; 3607 break; 3608 default: 3609 mtd->oobsize = 640; 3610 break; 3611 } 3612 extid >>= 2; 3613 /* Calc blocksize */ 3614 tmp = ((extid >> 1) & 0x04) | (extid & 0x03); 3615 if (tmp < 0x03) 3616 mtd->erasesize = (128 * 1024) << tmp; 3617 else if (tmp == 0x03) 3618 mtd->erasesize = 768 * 1024; 3619 else 3620 mtd->erasesize = (64 * 1024) << tmp; 3621 *busw = 0; 3622 } else { 3623 /* Calc pagesize */ 3624 mtd->writesize = 1024 << (extid & 0x03); 3625 extid >>= 2; 3626 /* Calc oobsize */ 3627 mtd->oobsize = (8 << (extid & 0x01)) * 3628 (mtd->writesize >> 9); 3629 extid >>= 2; 3630 /* Calc blocksize. Blocksize is multiples of 64KiB */ 3631 mtd->erasesize = (64 * 1024) << (extid & 0x03); 3632 extid >>= 2; 3633 /* Get buswidth information */ 3634 *busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0; 3635 3636 /* 3637 * Toshiba 24nm raw SLC (i.e., not BENAND) have 32B OOB per 3638 * 512B page. For Toshiba SLC, we decode the 5th/6th byte as 3639 * follows: 3640 * - ID byte 6, bits[2:0]: 100b -> 43nm, 101b -> 32nm, 3641 * 110b -> 24nm 3642 * - ID byte 5, bit[7]: 1 -> BENAND, 0 -> raw SLC 3643 */ 3644 if (id_len >= 6 && id_data[0] == NAND_MFR_TOSHIBA && 3645 nand_is_slc(chip) && 3646 (id_data[5] & 0x7) == 0x6 /* 24nm */ && 3647 !(id_data[4] & 0x80) /* !BENAND */) { 3648 mtd->oobsize = 32 * mtd->writesize >> 9; 3649 } 3650 3651 } 3652 } 3653 3654 /* 3655 * Old devices have chip data hardcoded in the device ID table. nand_decode_id 3656 * decodes a matching ID table entry and assigns the MTD size parameters for 3657 * the chip. 3658 */ 3659 static void nand_decode_id(struct mtd_info *mtd, struct nand_chip *chip, 3660 struct nand_flash_dev *type, u8 id_data[8], 3661 int *busw) 3662 { 3663 int maf_id = id_data[0]; 3664 3665 mtd->erasesize = type->erasesize; 3666 mtd->writesize = type->pagesize; 3667 mtd->oobsize = mtd->writesize / 32; 3668 *busw = type->options & NAND_BUSWIDTH_16; 3669 3670 /* All legacy ID NAND are small-page, SLC */ 3671 chip->bits_per_cell = 1; 3672 3673 /* 3674 * Check for Spansion/AMD ID + repeating 5th, 6th byte since 3675 * some Spansion chips have erasesize that conflicts with size 3676 * listed in nand_ids table. 3677 * Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39) 3678 */ 3679 if (maf_id == NAND_MFR_AMD && id_data[4] != 0x00 && id_data[5] == 0x00 3680 && id_data[6] == 0x00 && id_data[7] == 0x00 3681 && mtd->writesize == 512) { 3682 mtd->erasesize = 128 * 1024; 3683 mtd->erasesize <<= ((id_data[3] & 0x03) << 1); 3684 } 3685 } 3686 3687 /* 3688 * Set the bad block marker/indicator (BBM/BBI) patterns according to some 3689 * heuristic patterns using various detected parameters (e.g., manufacturer, 3690 * page size, cell-type information). 3691 */ 3692 static void nand_decode_bbm_options(struct mtd_info *mtd, 3693 struct nand_chip *chip, u8 id_data[8]) 3694 { 3695 int maf_id = id_data[0]; 3696 3697 /* Set the bad block position */ 3698 if (mtd->writesize > 512 || (chip->options & NAND_BUSWIDTH_16)) 3699 chip->badblockpos = NAND_LARGE_BADBLOCK_POS; 3700 else 3701 chip->badblockpos = NAND_SMALL_BADBLOCK_POS; 3702 3703 /* 3704 * Bad block marker is stored in the last page of each block on Samsung 3705 * and Hynix MLC devices; stored in first two pages of each block on 3706 * Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba, 3707 * AMD/Spansion, and Macronix. All others scan only the first page. 3708 */ 3709 if (!nand_is_slc(chip) && 3710 (maf_id == NAND_MFR_SAMSUNG || 3711 maf_id == NAND_MFR_HYNIX)) 3712 chip->bbt_options |= NAND_BBT_SCANLASTPAGE; 3713 else if ((nand_is_slc(chip) && 3714 (maf_id == NAND_MFR_SAMSUNG || 3715 maf_id == NAND_MFR_HYNIX || 3716 maf_id == NAND_MFR_TOSHIBA || 3717 maf_id == NAND_MFR_AMD || 3718 maf_id == NAND_MFR_MACRONIX)) || 3719 (mtd->writesize == 2048 && 3720 maf_id == NAND_MFR_MICRON)) 3721 chip->bbt_options |= NAND_BBT_SCAN2NDPAGE; 3722 } 3723 3724 static inline bool is_full_id_nand(struct nand_flash_dev *type) 3725 { 3726 return type->id_len; 3727 } 3728 3729 static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, 3730 struct nand_flash_dev *type, u8 *id_data, int *busw) 3731 { 3732 if (!strncmp((char *)type->id, (char *)id_data, type->id_len)) { 3733 mtd->writesize = type->pagesize; 3734 mtd->erasesize = type->erasesize; 3735 mtd->oobsize = type->oobsize; 3736 3737 chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]); 3738 chip->chipsize = (uint64_t)type->chipsize << 20; 3739 chip->options |= type->options; 3740 chip->ecc_strength_ds = NAND_ECC_STRENGTH(type); 3741 chip->ecc_step_ds = NAND_ECC_STEP(type); 3742 chip->onfi_timing_mode_default = 3743 type->onfi_timing_mode_default; 3744 3745 *busw = type->options & NAND_BUSWIDTH_16; 3746 3747 if (!mtd->name) 3748 mtd->name = type->name; 3749 3750 return true; 3751 } 3752 return false; 3753 } 3754 3755 /* 3756 * Get the flash and manufacturer id and lookup if the type is supported. 3757 */ 3758 struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, 3759 struct nand_chip *chip, 3760 int *maf_id, int *dev_id, 3761 struct nand_flash_dev *type) 3762 { 3763 int busw; 3764 int i, maf_idx; 3765 u8 id_data[8]; 3766 3767 /* 3768 * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx) 3769 * after power-up. 3770 */ 3771 nand_reset(chip, 0); 3772 3773 /* Select the device */ 3774 chip->select_chip(mtd, 0); 3775 3776 /* Send the command for reading device ID */ 3777 chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); 3778 3779 /* Read manufacturer and device IDs */ 3780 *maf_id = chip->read_byte(mtd); 3781 *dev_id = chip->read_byte(mtd); 3782 3783 /* 3784 * Try again to make sure, as some systems the bus-hold or other 3785 * interface concerns can cause random data which looks like a 3786 * possibly credible NAND flash to appear. If the two results do 3787 * not match, ignore the device completely. 3788 */ 3789 3790 chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); 3791 3792 /* Read entire ID string */ 3793 for (i = 0; i < 8; i++) 3794 id_data[i] = chip->read_byte(mtd); 3795 3796 if (id_data[0] != *maf_id || id_data[1] != *dev_id) { 3797 pr_info("second ID read did not match %02x,%02x against %02x,%02x\n", 3798 *maf_id, *dev_id, id_data[0], id_data[1]); 3799 return ERR_PTR(-ENODEV); 3800 } 3801 3802 if (!type) 3803 type = nand_flash_ids; 3804 3805 for (; type->name != NULL; type++) { 3806 if (is_full_id_nand(type)) { 3807 if (find_full_id_nand(mtd, chip, type, id_data, &busw)) 3808 goto ident_done; 3809 } else if (*dev_id == type->dev_id) { 3810 break; 3811 } 3812 } 3813 3814 chip->onfi_version = 0; 3815 if (!type->name || !type->pagesize) { 3816 /* Check if the chip is ONFI compliant */ 3817 if (nand_flash_detect_onfi(mtd, chip, &busw)) 3818 goto ident_done; 3819 3820 /* Check if the chip is JEDEC compliant */ 3821 if (nand_flash_detect_jedec(mtd, chip, &busw)) 3822 goto ident_done; 3823 } 3824 3825 if (!type->name) 3826 return ERR_PTR(-ENODEV); 3827 3828 if (!mtd->name) 3829 mtd->name = type->name; 3830 3831 chip->chipsize = (uint64_t)type->chipsize << 20; 3832 3833 if (!type->pagesize) { 3834 /* Decode parameters from extended ID */ 3835 nand_decode_ext_id(mtd, chip, id_data, &busw); 3836 } else { 3837 nand_decode_id(mtd, chip, type, id_data, &busw); 3838 } 3839 /* Get chip options */ 3840 chip->options |= type->options; 3841 3842 /* 3843 * Check if chip is not a Samsung device. Do not clear the 3844 * options for chips which do not have an extended id. 3845 */ 3846 if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize) 3847 chip->options &= ~NAND_SAMSUNG_LP_OPTIONS; 3848 ident_done: 3849 3850 /* Try to identify manufacturer */ 3851 for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) { 3852 if (nand_manuf_ids[maf_idx].id == *maf_id) 3853 break; 3854 } 3855 3856 if (chip->options & NAND_BUSWIDTH_AUTO) { 3857 WARN_ON(chip->options & NAND_BUSWIDTH_16); 3858 chip->options |= busw; 3859 nand_set_defaults(chip, busw); 3860 } else if (busw != (chip->options & NAND_BUSWIDTH_16)) { 3861 /* 3862 * Check, if buswidth is correct. Hardware drivers should set 3863 * chip correct! 3864 */ 3865 pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", 3866 *maf_id, *dev_id); 3867 pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, mtd->name); 3868 pr_warn("bus width %d instead %d bit\n", 3869 (chip->options & NAND_BUSWIDTH_16) ? 16 : 8, 3870 busw ? 16 : 8); 3871 return ERR_PTR(-EINVAL); 3872 } 3873 3874 nand_decode_bbm_options(mtd, chip, id_data); 3875 3876 /* Calculate the address shift from the page size */ 3877 chip->page_shift = ffs(mtd->writesize) - 1; 3878 /* Convert chipsize to number of pages per chip -1 */ 3879 chip->pagemask = (chip->chipsize >> chip->page_shift) - 1; 3880 3881 chip->bbt_erase_shift = chip->phys_erase_shift = 3882 ffs(mtd->erasesize) - 1; 3883 if (chip->chipsize & 0xffffffff) 3884 chip->chip_shift = ffs((unsigned)chip->chipsize) - 1; 3885 else { 3886 chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)); 3887 chip->chip_shift += 32 - 1; 3888 } 3889 3890 if (chip->chip_shift - chip->page_shift > 16) 3891 chip->options |= NAND_ROW_ADDR_3; 3892 3893 chip->badblockbits = 8; 3894 chip->erase = single_erase; 3895 3896 /* Do not replace user supplied command function! */ 3897 if (mtd->writesize > 512 && chip->cmdfunc == nand_command) 3898 chip->cmdfunc = nand_command_lp; 3899 3900 pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n", 3901 *maf_id, *dev_id); 3902 3903 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION 3904 if (chip->onfi_version) 3905 pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, 3906 chip->onfi_params.model); 3907 else if (chip->jedec_version) 3908 pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, 3909 chip->jedec_params.model); 3910 else 3911 pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, 3912 type->name); 3913 #else 3914 if (chip->jedec_version) 3915 pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, 3916 chip->jedec_params.model); 3917 else 3918 pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, 3919 type->name); 3920 3921 pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, 3922 type->name); 3923 #endif 3924 3925 pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n", 3926 (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC", 3927 mtd->erasesize >> 10, mtd->writesize, mtd->oobsize); 3928 return type; 3929 } 3930 EXPORT_SYMBOL(nand_get_flash_type); 3931 3932 #if CONFIG_IS_ENABLED(OF_CONTROL) 3933 DECLARE_GLOBAL_DATA_PTR; 3934 3935 static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip, int node) 3936 { 3937 int ret, ecc_mode = -1, ecc_strength, ecc_step; 3938 const void *blob = gd->fdt_blob; 3939 const char *str; 3940 3941 ret = fdtdec_get_int(blob, node, "nand-bus-width", -1); 3942 if (ret == 16) 3943 chip->options |= NAND_BUSWIDTH_16; 3944 3945 if (fdtdec_get_bool(blob, node, "nand-on-flash-bbt")) 3946 chip->bbt_options |= NAND_BBT_USE_FLASH; 3947 3948 str = fdt_getprop(blob, node, "nand-ecc-mode", NULL); 3949 if (str) { 3950 if (!strcmp(str, "none")) 3951 ecc_mode = NAND_ECC_NONE; 3952 else if (!strcmp(str, "soft")) 3953 ecc_mode = NAND_ECC_SOFT; 3954 else if (!strcmp(str, "hw")) 3955 ecc_mode = NAND_ECC_HW; 3956 else if (!strcmp(str, "hw_syndrome")) 3957 ecc_mode = NAND_ECC_HW_SYNDROME; 3958 else if (!strcmp(str, "hw_oob_first")) 3959 ecc_mode = NAND_ECC_HW_OOB_FIRST; 3960 else if (!strcmp(str, "soft_bch")) 3961 ecc_mode = NAND_ECC_SOFT_BCH; 3962 } 3963 3964 3965 ecc_strength = fdtdec_get_int(blob, node, "nand-ecc-strength", -1); 3966 ecc_step = fdtdec_get_int(blob, node, "nand-ecc-step-size", -1); 3967 3968 if ((ecc_step >= 0 && !(ecc_strength >= 0)) || 3969 (!(ecc_step >= 0) && ecc_strength >= 0)) { 3970 pr_err("must set both strength and step size in DT\n"); 3971 return -EINVAL; 3972 } 3973 3974 if (ecc_mode >= 0) 3975 chip->ecc.mode = ecc_mode; 3976 3977 if (ecc_strength >= 0) 3978 chip->ecc.strength = ecc_strength; 3979 3980 if (ecc_step > 0) 3981 chip->ecc.size = ecc_step; 3982 3983 if (fdt_getprop(blob, node, "nand-ecc-maximize", NULL)) 3984 chip->ecc.options |= NAND_ECC_MAXIMIZE; 3985 3986 return 0; 3987 } 3988 #else 3989 static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip, int node) 3990 { 3991 return 0; 3992 } 3993 #endif /* CONFIG_IS_ENABLED(OF_CONTROL) */ 3994 3995 /** 3996 * nand_scan_ident - [NAND Interface] Scan for the NAND device 3997 * @mtd: MTD device structure 3998 * @maxchips: number of chips to scan for 3999 * @table: alternative NAND ID table 4000 * 4001 * This is the first phase of the normal nand_scan() function. It reads the 4002 * flash ID and sets up MTD fields accordingly. 4003 * 4004 */ 4005 int nand_scan_ident(struct mtd_info *mtd, int maxchips, 4006 struct nand_flash_dev *table) 4007 { 4008 int i, nand_maf_id, nand_dev_id; 4009 struct nand_chip *chip = mtd_to_nand(mtd); 4010 struct nand_flash_dev *type; 4011 int ret; 4012 4013 if (chip->flash_node) { 4014 ret = nand_dt_init(mtd, chip, chip->flash_node); 4015 if (ret) 4016 return ret; 4017 } 4018 4019 /* Set the default functions */ 4020 nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16); 4021 4022 /* Read the flash type */ 4023 type = nand_get_flash_type(mtd, chip, &nand_maf_id, 4024 &nand_dev_id, table); 4025 4026 if (IS_ERR(type)) { 4027 if (!(chip->options & NAND_SCAN_SILENT_NODEV)) 4028 pr_warn("No NAND device found\n"); 4029 chip->select_chip(mtd, -1); 4030 return PTR_ERR(type); 4031 } 4032 4033 /* Initialize the ->data_interface field. */ 4034 ret = nand_init_data_interface(chip); 4035 if (ret) 4036 return ret; 4037 4038 /* 4039 * Setup the data interface correctly on the chip and controller side. 4040 * This explicit call to nand_setup_data_interface() is only required 4041 * for the first die, because nand_reset() has been called before 4042 * ->data_interface and ->default_onfi_timing_mode were set. 4043 * For the other dies, nand_reset() will automatically switch to the 4044 * best mode for us. 4045 */ 4046 ret = nand_setup_data_interface(chip, 0); 4047 if (ret) 4048 return ret; 4049 4050 chip->select_chip(mtd, -1); 4051 4052 /* Check for a chip array */ 4053 for (i = 1; i < maxchips; i++) { 4054 /* See comment in nand_get_flash_type for reset */ 4055 nand_reset(chip, i); 4056 4057 chip->select_chip(mtd, i); 4058 /* Send the command for reading device ID */ 4059 chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); 4060 /* Read manufacturer and device IDs */ 4061 if (nand_maf_id != chip->read_byte(mtd) || 4062 nand_dev_id != chip->read_byte(mtd)) { 4063 chip->select_chip(mtd, -1); 4064 break; 4065 } 4066 chip->select_chip(mtd, -1); 4067 } 4068 4069 #ifdef DEBUG 4070 if (i > 1) 4071 pr_info("%d chips detected\n", i); 4072 #endif 4073 4074 /* Store the number of chips and calc total size for mtd */ 4075 chip->numchips = i; 4076 mtd->size = i * chip->chipsize; 4077 4078 return 0; 4079 } 4080 EXPORT_SYMBOL(nand_scan_ident); 4081 4082 /** 4083 * nand_check_ecc_caps - check the sanity of preset ECC settings 4084 * @chip: nand chip info structure 4085 * @caps: ECC caps info structure 4086 * @oobavail: OOB size that the ECC engine can use 4087 * 4088 * When ECC step size and strength are already set, check if they are supported 4089 * by the controller and the calculated ECC bytes fit within the chip's OOB. 4090 * On success, the calculated ECC bytes is set. 4091 */ 4092 int nand_check_ecc_caps(struct nand_chip *chip, 4093 const struct nand_ecc_caps *caps, int oobavail) 4094 { 4095 struct mtd_info *mtd = nand_to_mtd(chip); 4096 const struct nand_ecc_step_info *stepinfo; 4097 int preset_step = chip->ecc.size; 4098 int preset_strength = chip->ecc.strength; 4099 int nsteps, ecc_bytes; 4100 int i, j; 4101 4102 if (WARN_ON(oobavail < 0)) 4103 return -EINVAL; 4104 4105 if (!preset_step || !preset_strength) 4106 return -ENODATA; 4107 4108 nsteps = mtd->writesize / preset_step; 4109 4110 for (i = 0; i < caps->nstepinfos; i++) { 4111 stepinfo = &caps->stepinfos[i]; 4112 4113 if (stepinfo->stepsize != preset_step) 4114 continue; 4115 4116 for (j = 0; j < stepinfo->nstrengths; j++) { 4117 if (stepinfo->strengths[j] != preset_strength) 4118 continue; 4119 4120 ecc_bytes = caps->calc_ecc_bytes(preset_step, 4121 preset_strength); 4122 if (WARN_ON_ONCE(ecc_bytes < 0)) 4123 return ecc_bytes; 4124 4125 if (ecc_bytes * nsteps > oobavail) { 4126 pr_err("ECC (step, strength) = (%d, %d) does not fit in OOB", 4127 preset_step, preset_strength); 4128 return -ENOSPC; 4129 } 4130 4131 chip->ecc.bytes = ecc_bytes; 4132 4133 return 0; 4134 } 4135 } 4136 4137 pr_err("ECC (step, strength) = (%d, %d) not supported on this controller", 4138 preset_step, preset_strength); 4139 4140 return -ENOTSUPP; 4141 } 4142 EXPORT_SYMBOL_GPL(nand_check_ecc_caps); 4143 4144 /** 4145 * nand_match_ecc_req - meet the chip's requirement with least ECC bytes 4146 * @chip: nand chip info structure 4147 * @caps: ECC engine caps info structure 4148 * @oobavail: OOB size that the ECC engine can use 4149 * 4150 * If a chip's ECC requirement is provided, try to meet it with the least 4151 * number of ECC bytes (i.e. with the largest number of OOB-free bytes). 4152 * On success, the chosen ECC settings are set. 4153 */ 4154 int nand_match_ecc_req(struct nand_chip *chip, 4155 const struct nand_ecc_caps *caps, int oobavail) 4156 { 4157 struct mtd_info *mtd = nand_to_mtd(chip); 4158 const struct nand_ecc_step_info *stepinfo; 4159 int req_step = chip->ecc_step_ds; 4160 int req_strength = chip->ecc_strength_ds; 4161 int req_corr, step_size, strength, nsteps, ecc_bytes, ecc_bytes_total; 4162 int best_step, best_strength, best_ecc_bytes; 4163 int best_ecc_bytes_total = INT_MAX; 4164 int i, j; 4165 4166 if (WARN_ON(oobavail < 0)) 4167 return -EINVAL; 4168 4169 /* No information provided by the NAND chip */ 4170 if (!req_step || !req_strength) 4171 return -ENOTSUPP; 4172 4173 /* number of correctable bits the chip requires in a page */ 4174 req_corr = mtd->writesize / req_step * req_strength; 4175 4176 for (i = 0; i < caps->nstepinfos; i++) { 4177 stepinfo = &caps->stepinfos[i]; 4178 step_size = stepinfo->stepsize; 4179 4180 for (j = 0; j < stepinfo->nstrengths; j++) { 4181 strength = stepinfo->strengths[j]; 4182 4183 /* 4184 * If both step size and strength are smaller than the 4185 * chip's requirement, it is not easy to compare the 4186 * resulted reliability. 4187 */ 4188 if (step_size < req_step && strength < req_strength) 4189 continue; 4190 4191 if (mtd->writesize % step_size) 4192 continue; 4193 4194 nsteps = mtd->writesize / step_size; 4195 4196 ecc_bytes = caps->calc_ecc_bytes(step_size, strength); 4197 if (WARN_ON_ONCE(ecc_bytes < 0)) 4198 continue; 4199 ecc_bytes_total = ecc_bytes * nsteps; 4200 4201 if (ecc_bytes_total > oobavail || 4202 strength * nsteps < req_corr) 4203 continue; 4204 4205 /* 4206 * We assume the best is to meet the chip's requrement 4207 * with the least number of ECC bytes. 4208 */ 4209 if (ecc_bytes_total < best_ecc_bytes_total) { 4210 best_ecc_bytes_total = ecc_bytes_total; 4211 best_step = step_size; 4212 best_strength = strength; 4213 best_ecc_bytes = ecc_bytes; 4214 } 4215 } 4216 } 4217 4218 if (best_ecc_bytes_total == INT_MAX) 4219 return -ENOTSUPP; 4220 4221 chip->ecc.size = best_step; 4222 chip->ecc.strength = best_strength; 4223 chip->ecc.bytes = best_ecc_bytes; 4224 4225 return 0; 4226 } 4227 EXPORT_SYMBOL_GPL(nand_match_ecc_req); 4228 4229 /** 4230 * nand_maximize_ecc - choose the max ECC strength available 4231 * @chip: nand chip info structure 4232 * @caps: ECC engine caps info structure 4233 * @oobavail: OOB size that the ECC engine can use 4234 * 4235 * Choose the max ECC strength that is supported on the controller, and can fit 4236 * within the chip's OOB. On success, the chosen ECC settings are set. 4237 */ 4238 int nand_maximize_ecc(struct nand_chip *chip, 4239 const struct nand_ecc_caps *caps, int oobavail) 4240 { 4241 struct mtd_info *mtd = nand_to_mtd(chip); 4242 const struct nand_ecc_step_info *stepinfo; 4243 int step_size, strength, nsteps, ecc_bytes, corr; 4244 int best_corr = 0; 4245 int best_step = 0; 4246 int best_strength, best_ecc_bytes; 4247 int i, j; 4248 4249 if (WARN_ON(oobavail < 0)) 4250 return -EINVAL; 4251 4252 for (i = 0; i < caps->nstepinfos; i++) { 4253 stepinfo = &caps->stepinfos[i]; 4254 step_size = stepinfo->stepsize; 4255 4256 /* If chip->ecc.size is already set, respect it */ 4257 if (chip->ecc.size && step_size != chip->ecc.size) 4258 continue; 4259 4260 for (j = 0; j < stepinfo->nstrengths; j++) { 4261 strength = stepinfo->strengths[j]; 4262 4263 if (mtd->writesize % step_size) 4264 continue; 4265 4266 nsteps = mtd->writesize / step_size; 4267 4268 ecc_bytes = caps->calc_ecc_bytes(step_size, strength); 4269 if (WARN_ON_ONCE(ecc_bytes < 0)) 4270 continue; 4271 4272 if (ecc_bytes * nsteps > oobavail) 4273 continue; 4274 4275 corr = strength * nsteps; 4276 4277 /* 4278 * If the number of correctable bits is the same, 4279 * bigger step_size has more reliability. 4280 */ 4281 if (corr > best_corr || 4282 (corr == best_corr && step_size > best_step)) { 4283 best_corr = corr; 4284 best_step = step_size; 4285 best_strength = strength; 4286 best_ecc_bytes = ecc_bytes; 4287 } 4288 } 4289 } 4290 4291 if (!best_corr) 4292 return -ENOTSUPP; 4293 4294 chip->ecc.size = best_step; 4295 chip->ecc.strength = best_strength; 4296 chip->ecc.bytes = best_ecc_bytes; 4297 4298 return 0; 4299 } 4300 EXPORT_SYMBOL_GPL(nand_maximize_ecc); 4301 4302 /* 4303 * Check if the chip configuration meet the datasheet requirements. 4304 4305 * If our configuration corrects A bits per B bytes and the minimum 4306 * required correction level is X bits per Y bytes, then we must ensure 4307 * both of the following are true: 4308 * 4309 * (1) A / B >= X / Y 4310 * (2) A >= X 4311 * 4312 * Requirement (1) ensures we can correct for the required bitflip density. 4313 * Requirement (2) ensures we can correct even when all bitflips are clumped 4314 * in the same sector. 4315 */ 4316 static bool nand_ecc_strength_good(struct mtd_info *mtd) 4317 { 4318 struct nand_chip *chip = mtd_to_nand(mtd); 4319 struct nand_ecc_ctrl *ecc = &chip->ecc; 4320 int corr, ds_corr; 4321 4322 if (ecc->size == 0 || chip->ecc_step_ds == 0) 4323 /* Not enough information */ 4324 return true; 4325 4326 /* 4327 * We get the number of corrected bits per page to compare 4328 * the correction density. 4329 */ 4330 corr = (mtd->writesize * ecc->strength) / ecc->size; 4331 ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds; 4332 4333 return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds; 4334 } 4335 4336 static bool invalid_ecc_page_accessors(struct nand_chip *chip) 4337 { 4338 struct nand_ecc_ctrl *ecc = &chip->ecc; 4339 4340 if (nand_standard_page_accessors(ecc)) 4341 return false; 4342 4343 /* 4344 * NAND_ECC_CUSTOM_PAGE_ACCESS flag is set, make sure the NAND 4345 * controller driver implements all the page accessors because 4346 * default helpers are not suitable when the core does not 4347 * send the READ0/PAGEPROG commands. 4348 */ 4349 return (!ecc->read_page || !ecc->write_page || 4350 !ecc->read_page_raw || !ecc->write_page_raw || 4351 (NAND_HAS_SUBPAGE_READ(chip) && !ecc->read_subpage) || 4352 (NAND_HAS_SUBPAGE_WRITE(chip) && !ecc->write_subpage && 4353 ecc->hwctl && ecc->calculate)); 4354 } 4355 4356 /** 4357 * nand_scan_tail - [NAND Interface] Scan for the NAND device 4358 * @mtd: MTD device structure 4359 * 4360 * This is the second phase of the normal nand_scan() function. It fills out 4361 * all the uninitialized function pointers with the defaults and scans for a 4362 * bad block table if appropriate. 4363 */ 4364 int nand_scan_tail(struct mtd_info *mtd) 4365 { 4366 int i; 4367 struct nand_chip *chip = mtd_to_nand(mtd); 4368 struct nand_ecc_ctrl *ecc = &chip->ecc; 4369 struct nand_buffers *nbuf; 4370 4371 /* New bad blocks should be marked in OOB, flash-based BBT, or both */ 4372 BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && 4373 !(chip->bbt_options & NAND_BBT_USE_FLASH)); 4374 4375 if (invalid_ecc_page_accessors(chip)) { 4376 pr_err("Invalid ECC page accessors setup\n"); 4377 return -EINVAL; 4378 } 4379 4380 if (!(chip->options & NAND_OWN_BUFFERS)) { 4381 nbuf = kzalloc(sizeof(struct nand_buffers), GFP_KERNEL); 4382 chip->buffers = nbuf; 4383 } else { 4384 if (!chip->buffers) 4385 return -ENOMEM; 4386 } 4387 4388 /* Set the internal oob buffer location, just after the page data */ 4389 chip->oob_poi = chip->buffers->databuf + mtd->writesize; 4390 4391 /* 4392 * If no default placement scheme is given, select an appropriate one. 4393 */ 4394 if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) { 4395 switch (mtd->oobsize) { 4396 case 8: 4397 ecc->layout = &nand_oob_8; 4398 break; 4399 case 16: 4400 ecc->layout = &nand_oob_16; 4401 break; 4402 case 64: 4403 ecc->layout = &nand_oob_64; 4404 break; 4405 case 128: 4406 ecc->layout = &nand_oob_128; 4407 break; 4408 default: 4409 pr_warn("No oob scheme defined for oobsize %d\n", 4410 mtd->oobsize); 4411 BUG(); 4412 } 4413 } 4414 4415 if (!chip->write_page) 4416 chip->write_page = nand_write_page; 4417 4418 /* 4419 * Check ECC mode, default to software if 3byte/512byte hardware ECC is 4420 * selected and we have 256 byte pagesize fallback to software ECC 4421 */ 4422 4423 switch (ecc->mode) { 4424 case NAND_ECC_HW_OOB_FIRST: 4425 /* Similar to NAND_ECC_HW, but a separate read_page handle */ 4426 if (!ecc->calculate || !ecc->correct || !ecc->hwctl) { 4427 pr_warn("No ECC functions supplied; hardware ECC not possible\n"); 4428 BUG(); 4429 } 4430 if (!ecc->read_page) 4431 ecc->read_page = nand_read_page_hwecc_oob_first; 4432 4433 case NAND_ECC_HW: 4434 /* Use standard hwecc read page function? */ 4435 if (!ecc->read_page) 4436 ecc->read_page = nand_read_page_hwecc; 4437 if (!ecc->write_page) 4438 ecc->write_page = nand_write_page_hwecc; 4439 if (!ecc->read_page_raw) 4440 ecc->read_page_raw = nand_read_page_raw; 4441 if (!ecc->write_page_raw) 4442 ecc->write_page_raw = nand_write_page_raw; 4443 if (!ecc->read_oob) 4444 ecc->read_oob = nand_read_oob_std; 4445 if (!ecc->write_oob) 4446 ecc->write_oob = nand_write_oob_std; 4447 if (!ecc->read_subpage) 4448 ecc->read_subpage = nand_read_subpage; 4449 if (!ecc->write_subpage && ecc->hwctl && ecc->calculate) 4450 ecc->write_subpage = nand_write_subpage_hwecc; 4451 4452 case NAND_ECC_HW_SYNDROME: 4453 if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) && 4454 (!ecc->read_page || 4455 ecc->read_page == nand_read_page_hwecc || 4456 !ecc->write_page || 4457 ecc->write_page == nand_write_page_hwecc)) { 4458 pr_warn("No ECC functions supplied; hardware ECC not possible\n"); 4459 BUG(); 4460 } 4461 /* Use standard syndrome read/write page function? */ 4462 if (!ecc->read_page) 4463 ecc->read_page = nand_read_page_syndrome; 4464 if (!ecc->write_page) 4465 ecc->write_page = nand_write_page_syndrome; 4466 if (!ecc->read_page_raw) 4467 ecc->read_page_raw = nand_read_page_raw_syndrome; 4468 if (!ecc->write_page_raw) 4469 ecc->write_page_raw = nand_write_page_raw_syndrome; 4470 if (!ecc->read_oob) 4471 ecc->read_oob = nand_read_oob_syndrome; 4472 if (!ecc->write_oob) 4473 ecc->write_oob = nand_write_oob_syndrome; 4474 4475 if (mtd->writesize >= ecc->size) { 4476 if (!ecc->strength) { 4477 pr_warn("Driver must set ecc.strength when using hardware ECC\n"); 4478 BUG(); 4479 } 4480 break; 4481 } 4482 pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n", 4483 ecc->size, mtd->writesize); 4484 ecc->mode = NAND_ECC_SOFT; 4485 4486 case NAND_ECC_SOFT: 4487 ecc->calculate = nand_calculate_ecc; 4488 ecc->correct = nand_correct_data; 4489 ecc->read_page = nand_read_page_swecc; 4490 ecc->read_subpage = nand_read_subpage; 4491 ecc->write_page = nand_write_page_swecc; 4492 ecc->read_page_raw = nand_read_page_raw; 4493 ecc->write_page_raw = nand_write_page_raw; 4494 ecc->read_oob = nand_read_oob_std; 4495 ecc->write_oob = nand_write_oob_std; 4496 if (!ecc->size) 4497 ecc->size = 256; 4498 ecc->bytes = 3; 4499 ecc->strength = 1; 4500 break; 4501 4502 case NAND_ECC_SOFT_BCH: 4503 if (!mtd_nand_has_bch()) { 4504 pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n"); 4505 BUG(); 4506 } 4507 ecc->calculate = nand_bch_calculate_ecc; 4508 ecc->correct = nand_bch_correct_data; 4509 ecc->read_page = nand_read_page_swecc; 4510 ecc->read_subpage = nand_read_subpage; 4511 ecc->write_page = nand_write_page_swecc; 4512 ecc->read_page_raw = nand_read_page_raw; 4513 ecc->write_page_raw = nand_write_page_raw; 4514 ecc->read_oob = nand_read_oob_std; 4515 ecc->write_oob = nand_write_oob_std; 4516 /* 4517 * Board driver should supply ecc.size and ecc.strength values 4518 * to select how many bits are correctable. Otherwise, default 4519 * to 4 bits for large page devices. 4520 */ 4521 if (!ecc->size && (mtd->oobsize >= 64)) { 4522 ecc->size = 512; 4523 ecc->strength = 4; 4524 } 4525 4526 /* See nand_bch_init() for details. */ 4527 ecc->bytes = 0; 4528 ecc->priv = nand_bch_init(mtd); 4529 if (!ecc->priv) { 4530 pr_warn("BCH ECC initialization failed!\n"); 4531 BUG(); 4532 } 4533 break; 4534 4535 case NAND_ECC_NONE: 4536 pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n"); 4537 ecc->read_page = nand_read_page_raw; 4538 ecc->write_page = nand_write_page_raw; 4539 ecc->read_oob = nand_read_oob_std; 4540 ecc->read_page_raw = nand_read_page_raw; 4541 ecc->write_page_raw = nand_write_page_raw; 4542 ecc->write_oob = nand_write_oob_std; 4543 ecc->size = mtd->writesize; 4544 ecc->bytes = 0; 4545 ecc->strength = 0; 4546 break; 4547 4548 default: 4549 pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode); 4550 BUG(); 4551 } 4552 4553 /* For many systems, the standard OOB write also works for raw */ 4554 if (!ecc->read_oob_raw) 4555 ecc->read_oob_raw = ecc->read_oob; 4556 if (!ecc->write_oob_raw) 4557 ecc->write_oob_raw = ecc->write_oob; 4558 4559 /* 4560 * The number of bytes available for a client to place data into 4561 * the out of band area. 4562 */ 4563 mtd->oobavail = 0; 4564 if (ecc->layout) { 4565 for (i = 0; ecc->layout->oobfree[i].length; i++) 4566 mtd->oobavail += ecc->layout->oobfree[i].length; 4567 } 4568 4569 /* ECC sanity check: warn if it's too weak */ 4570 if (!nand_ecc_strength_good(mtd)) 4571 pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", 4572 mtd->name); 4573 4574 /* 4575 * Set the number of read / write steps for one page depending on ECC 4576 * mode. 4577 */ 4578 ecc->steps = mtd->writesize / ecc->size; 4579 if (ecc->steps * ecc->size != mtd->writesize) { 4580 pr_warn("Invalid ECC parameters\n"); 4581 BUG(); 4582 } 4583 ecc->total = ecc->steps * ecc->bytes; 4584 4585 /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ 4586 if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) { 4587 switch (ecc->steps) { 4588 case 2: 4589 mtd->subpage_sft = 1; 4590 break; 4591 case 4: 4592 case 8: 4593 case 16: 4594 mtd->subpage_sft = 2; 4595 break; 4596 } 4597 } 4598 chip->subpagesize = mtd->writesize >> mtd->subpage_sft; 4599 4600 /* Initialize state */ 4601 chip->state = FL_READY; 4602 4603 /* Invalidate the pagebuffer reference */ 4604 chip->pagebuf = -1; 4605 4606 /* Large page NAND with SOFT_ECC should support subpage reads */ 4607 switch (ecc->mode) { 4608 case NAND_ECC_SOFT: 4609 case NAND_ECC_SOFT_BCH: 4610 if (chip->page_shift > 9) 4611 chip->options |= NAND_SUBPAGE_READ; 4612 break; 4613 4614 default: 4615 break; 4616 } 4617 4618 /* Fill in remaining MTD driver data */ 4619 mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH; 4620 mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM : 4621 MTD_CAP_NANDFLASH; 4622 mtd->_erase = nand_erase; 4623 mtd->_read = nand_read; 4624 mtd->_write = nand_write; 4625 mtd->_panic_write = panic_nand_write; 4626 mtd->_read_oob = nand_read_oob; 4627 mtd->_write_oob = nand_write_oob; 4628 mtd->_sync = nand_sync; 4629 mtd->_lock = NULL; 4630 mtd->_unlock = NULL; 4631 mtd->_block_isreserved = nand_block_isreserved; 4632 mtd->_block_isbad = nand_block_isbad; 4633 mtd->_block_markbad = nand_block_markbad; 4634 mtd->writebufsize = mtd->writesize; 4635 4636 /* propagate ecc info to mtd_info */ 4637 mtd->ecclayout = ecc->layout; 4638 mtd->ecc_strength = ecc->strength; 4639 mtd->ecc_step_size = ecc->size; 4640 /* 4641 * Initialize bitflip_threshold to its default prior scan_bbt() call. 4642 * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be 4643 * properly set. 4644 */ 4645 if (!mtd->bitflip_threshold) 4646 mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4); 4647 4648 return 0; 4649 } 4650 EXPORT_SYMBOL(nand_scan_tail); 4651 4652 /** 4653 * nand_scan - [NAND Interface] Scan for the NAND device 4654 * @mtd: MTD device structure 4655 * @maxchips: number of chips to scan for 4656 * 4657 * This fills out all the uninitialized function pointers with the defaults. 4658 * The flash ID is read and the mtd/chip structures are filled with the 4659 * appropriate values. 4660 */ 4661 int nand_scan(struct mtd_info *mtd, int maxchips) 4662 { 4663 int ret; 4664 4665 ret = nand_scan_ident(mtd, maxchips, NULL); 4666 if (!ret) 4667 ret = nand_scan_tail(mtd); 4668 return ret; 4669 } 4670 EXPORT_SYMBOL(nand_scan); 4671 4672 MODULE_LICENSE("GPL"); 4673 MODULE_AUTHOR("Steven J. Hill <sjhill (at) realitydiluted.com>"); 4674 MODULE_AUTHOR("Thomas Gleixner <tglx (at) linutronix.de>"); 4675 MODULE_DESCRIPTION("Generic NAND flash driver code"); 4676