1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (c) 2009 Wind River Systems, Inc. 4 * Tom Rix <Tom.Rix at windriver.com> 5 * 6 * twl4030_power_reset_init is derived from code on omapzoom, 7 * git://git.omapzoom.com/repo/u-boot.git 8 * 9 * Copyright (C) 2007-2009 Texas Instruments, Inc. 10 * 11 * twl4030_power_init is from cpu/omap3/common.c, power_init_r 12 * 13 * (C) Copyright 2004-2008 14 * Texas Instruments, <www.ti.com> 15 * 16 * Author : 17 * Sunil Kumar <sunilsaini05 at gmail.com> 18 * Shashi Ranjan <shashiranjanmca05 at gmail.com> 19 * 20 * Derived from Beagle Board and 3430 SDP code by 21 * Richard Woodruff <r-woodruff2 at ti.com> 22 * Syed Mohammed Khasim <khasim at ti.com> 23 */ 24 25 #include <twl4030.h> 26 27 /* 28 * Power Reset 29 */ 30 void twl4030_power_reset_init(void) 31 { 32 u8 val = 0; 33 if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, 34 TWL4030_PM_MASTER_P1_SW_EVENTS, &val)) { 35 printf("Error:TWL4030: failed to read the power register\n"); 36 printf("Could not initialize hardware reset\n"); 37 } else { 38 val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON; 39 if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 40 TWL4030_PM_MASTER_P1_SW_EVENTS, val)) { 41 printf("Error:TWL4030: failed to write the power register\n"); 42 printf("Could not initialize hardware reset\n"); 43 } 44 } 45 } 46 47 /* 48 * Power off 49 */ 50 void twl4030_power_off(void) 51 { 52 u8 data; 53 54 /* PM master unlock (CFG and TST keys) */ 55 56 data = 0xCE; 57 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 58 TWL4030_PM_MASTER_PROTECT_KEY, data); 59 data = 0xEC; 60 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 61 TWL4030_PM_MASTER_PROTECT_KEY, data); 62 63 /* VBAT start disable */ 64 65 twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, 66 TWL4030_PM_MASTER_CFG_P1_TRANSITION, &data); 67 data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT; 68 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 69 TWL4030_PM_MASTER_CFG_P1_TRANSITION, data); 70 71 twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, 72 TWL4030_PM_MASTER_CFG_P2_TRANSITION, &data); 73 data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT; 74 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 75 TWL4030_PM_MASTER_CFG_P2_TRANSITION, data); 76 77 twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, 78 TWL4030_PM_MASTER_CFG_P3_TRANSITION, &data); 79 data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT; 80 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 81 TWL4030_PM_MASTER_CFG_P3_TRANSITION, data); 82 83 /* High jitter for PWRANA2 */ 84 85 twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, 86 TWL4030_PM_MASTER_CFG_PWRANA2, &data); 87 data &= ~(TWL4030_PM_MASTER_CFG_PWRANA2_LOJIT0_LOWV | 88 TWL4030_PM_MASTER_CFG_PWRANA2_LOJIT1_LOWV); 89 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 90 TWL4030_PM_MASTER_CFG_PWRANA2, data); 91 92 /* PM master lock */ 93 94 data = 0xFF; 95 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 96 TWL4030_PM_MASTER_PROTECT_KEY, data); 97 98 /* Power off */ 99 100 twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, 101 TWL4030_PM_MASTER_P1_SW_EVENTS, &data); 102 data |= TWL4030_PM_MASTER_SW_EVENTS_DEVOFF; 103 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 104 TWL4030_PM_MASTER_P1_SW_EVENTS, data); 105 } 106 107 /* 108 * Set Device Group and Voltage 109 */ 110 void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, 111 u8 dev_grp, u8 dev_grp_sel) 112 { 113 int ret; 114 115 /* Select the Voltage */ 116 ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_reg, 117 vsel_val); 118 if (ret != 0) { 119 printf("Could not write vsel to reg %02x (%d)\n", 120 vsel_reg, ret); 121 return; 122 } 123 124 /* Select the Device Group (enable the supply if dev_grp_sel != 0) */ 125 ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp, 126 dev_grp_sel); 127 if (ret != 0) 128 printf("Could not write grp_sel to reg %02x (%d)\n", 129 dev_grp, ret); 130 } 131 132 void twl4030_power_init(void) 133 { 134 /* set VAUX3 to 2.8V */ 135 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX3_DEDICATED, 136 TWL4030_PM_RECEIVER_VAUX3_VSEL_28, 137 TWL4030_PM_RECEIVER_VAUX3_DEV_GRP, 138 TWL4030_PM_RECEIVER_DEV_GRP_P1); 139 140 /* set VPLL2 to 1.8V */ 141 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VPLL2_DEDICATED, 142 TWL4030_PM_RECEIVER_VPLL2_VSEL_18, 143 TWL4030_PM_RECEIVER_VPLL2_DEV_GRP, 144 TWL4030_PM_RECEIVER_DEV_GRP_ALL); 145 146 /* set VDAC to 1.8V */ 147 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDAC_DEDICATED, 148 TWL4030_PM_RECEIVER_VDAC_VSEL_18, 149 TWL4030_PM_RECEIVER_VDAC_DEV_GRP, 150 TWL4030_PM_RECEIVER_DEV_GRP_P1); 151 } 152 153 void twl4030_power_mmc_init(int dev_index) 154 { 155 if (dev_index == 0) { 156 /* Set VMMC1 to 3.15 Volts */ 157 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED, 158 TWL4030_PM_RECEIVER_VMMC1_VSEL_32, 159 TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, 160 TWL4030_PM_RECEIVER_DEV_GRP_P1); 161 162 mdelay(100); /* ramp-up delay from Linux code */ 163 } else if (dev_index == 1) { 164 /* Set VMMC2 to 3.15 Volts */ 165 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED, 166 TWL4030_PM_RECEIVER_VMMC2_VSEL_32, 167 TWL4030_PM_RECEIVER_VMMC2_DEV_GRP, 168 TWL4030_PM_RECEIVER_DEV_GRP_P1); 169 170 mdelay(100); /* ramp-up delay from Linux code */ 171 } 172 } 173 174 #ifdef CONFIG_CMD_POWEROFF 175 int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 176 { 177 twl4030_power_off(); 178 179 return 0; 180 } 181 #endif 182
