1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2001 4 * Denis Peter, MPL AG Switzerland 5 * 6 * Adapted for U-Boot driver model 7 * (C) Copyright 2015 Google, Inc 8 * Note: Part of this code has been derived from linux 9 * 10 */ 11 #ifndef _USB_H_ 12 #define _USB_H_ 13 14 #include <fdtdec.h> 15 #include <usb_defs.h> 16 #include <linux/usb/ch9.h> 17 #include <asm/cache.h> 18 #include <part.h> 19 20 /* 21 * The EHCI spec says that we must align to at least 32 bytes. However, 22 * some platforms require larger alignment. 23 */ 24 #if ARCH_DMA_MINALIGN > 32 25 #define USB_DMA_MINALIGN ARCH_DMA_MINALIGN 26 #else 27 #define USB_DMA_MINALIGN 32 28 #endif 29 30 /* Everything is aribtrary */ 31 #define USB_ALTSETTINGALLOC 4 32 #define USB_MAXALTSETTING 128 /* Hard limit */ 33 34 #define USB_MAX_DEVICE 32 35 #define USB_MAXCONFIG 8 36 #define USB_MAXINTERFACES 8 37 #define USB_MAXENDPOINTS 16 38 #define USB_MAXCHILDREN 8 /* This is arbitrary */ 39 #define USB_MAX_HUB 16 40 41 #define USB_CNTL_TIMEOUT 100 /* 100ms timeout */ 42 43 /* 44 * This is the timeout to allow for submitting an urb in ms. We allow more 45 * time for a BULK device to react - some are slow. 46 */ 47 #define USB_TIMEOUT_MS(pipe) (usb_pipebulk(pipe) ? 5000 : 1000) 48 49 /* device request (setup) */ 50 struct devrequest { 51 __u8 requesttype; 52 __u8 request; 53 __le16 value; 54 __le16 index; 55 __le16 length; 56 } __attribute__ ((packed)); 57 58 /* Interface */ 59 struct usb_interface { 60 struct usb_interface_descriptor desc; 61 62 __u8 no_of_ep; 63 __u8 num_altsetting; 64 __u8 act_altsetting; 65 66 struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; 67 /* 68 * Super Speed Device will have Super Speed Endpoint 69 * Companion Descriptor (section 9.6.7 of usb 3.0 spec) 70 * Revision 1.0 June 6th 2011 71 */ 72 struct usb_ss_ep_comp_descriptor ss_ep_comp_desc[USB_MAXENDPOINTS]; 73 } __attribute__ ((packed)); 74 75 /* Configuration information.. */ 76 struct usb_config { 77 struct usb_config_descriptor desc; 78 79 __u8 no_of_if; /* number of interfaces */ 80 struct usb_interface if_desc[USB_MAXINTERFACES]; 81 } __attribute__ ((packed)); 82 83 enum { 84 /* Maximum packet size; encoded as 0,1,2,3 = 8,16,32,64 */ 85 PACKET_SIZE_8 = 0, 86 PACKET_SIZE_16 = 1, 87 PACKET_SIZE_32 = 2, 88 PACKET_SIZE_64 = 3, 89 }; 90 91 /** 92 * struct usb_device - information about a USB device 93 * 94 * With driver model both UCLASS_USB (the USB controllers) and UCLASS_USB_HUB 95 * (the hubs) have this as parent data. Hubs are children of controllers or 96 * other hubs and there is always a single root hub for each controller. 97 * Therefore struct usb_device can always be accessed with 98 * dev_get_parent_priv(dev), where dev is a USB device. 99 * 100 * Pointers exist for obtaining both the device (could be any uclass) and 101 * controller (UCLASS_USB) from this structure. The controller does not have 102 * a struct usb_device since it is not a device. 103 */ 104 struct usb_device { 105 int devnum; /* Device number on USB bus */ 106 int speed; /* full/low/high */ 107 char mf[32]; /* manufacturer */ 108 char prod[32]; /* product */ 109 char serial[32]; /* serial number */ 110 111 /* Maximum packet size; one of: PACKET_SIZE_* */ 112 int maxpacketsize; 113 /* one bit for each endpoint ([0] = IN, [1] = OUT) */ 114 unsigned int toggle[2]; 115 /* endpoint halts; one bit per endpoint # & direction; 116 * [0] = IN, [1] = OUT 117 */ 118 unsigned int halted[2]; 119 int epmaxpacketin[16]; /* INput endpoint specific maximums */ 120 int epmaxpacketout[16]; /* OUTput endpoint specific maximums */ 121 122 int configno; /* selected config number */ 123 /* Device Descriptor */ 124 struct usb_device_descriptor descriptor 125 __attribute__((aligned(ARCH_DMA_MINALIGN))); 126 struct usb_config config; /* config descriptor */ 127 128 int have_langid; /* whether string_langid is valid yet */ 129 int string_langid; /* language ID for strings */ 130 int (*irq_handle)(struct usb_device *dev); 131 unsigned long irq_status; 132 int irq_act_len; /* transferred bytes */ 133 void *privptr; 134 /* 135 * Child devices - if this is a hub device 136 * Each instance needs its own set of data structures. 137 */ 138 unsigned long status; 139 unsigned long int_pending; /* 1 bit per ep, used by int_queue */ 140 int act_len; /* transferred bytes */ 141 int maxchild; /* Number of ports if hub */ 142 int portnr; /* Port number, 1=first */ 143 #ifndef CONFIG_DM_USB 144 /* parent hub, or NULL if this is the root hub */ 145 struct usb_device *parent; 146 struct usb_device *children[USB_MAXCHILDREN]; 147 void *controller; /* hardware controller private data */ 148 #endif 149 /* slot_id - for xHCI enabled devices */ 150 unsigned int slot_id; 151 #ifdef CONFIG_DM_USB 152 struct udevice *dev; /* Pointer to associated device */ 153 struct udevice *controller_dev; /* Pointer to associated controller */ 154 #endif 155 }; 156 157 struct int_queue; 158 159 /* 160 * You can initialize platform's USB host or device 161 * ports by passing this enum as an argument to 162 * board_usb_init(). 163 */ 164 enum usb_init_type { 165 USB_INIT_HOST, 166 USB_INIT_DEVICE 167 }; 168 169 /********************************************************************** 170 * this is how the lowlevel part communicate with the outer world 171 */ 172 173 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller); 174 int usb_lowlevel_stop(int index); 175 176 #if defined(CONFIG_USB_MUSB_HOST) || defined(CONFIG_DM_USB) 177 int usb_reset_root_port(struct usb_device *dev); 178 #else 179 #define usb_reset_root_port(dev) 180 #endif 181 182 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, 183 void *buffer, int transfer_len); 184 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 185 int transfer_len, struct devrequest *setup); 186 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, 187 int transfer_len, int interval); 188 189 #if defined CONFIG_USB_EHCI_HCD || defined CONFIG_USB_MUSB_HOST \ 190 || defined(CONFIG_DM_USB) 191 struct int_queue *create_int_queue(struct usb_device *dev, unsigned long pipe, 192 int queuesize, int elementsize, void *buffer, int interval); 193 int destroy_int_queue(struct usb_device *dev, struct int_queue *queue); 194 void *poll_int_queue(struct usb_device *dev, struct int_queue *queue); 195 #endif 196 197 /* Defines */ 198 #define USB_UHCI_VEND_ID 0x8086 199 #define USB_UHCI_DEV_ID 0x7112 200 201 /* 202 * PXA25x can only act as USB device. There are drivers 203 * which works with USB CDC gadgets implementations. 204 * Some of them have common routines which can be used 205 * in boards init functions e.g. udc_disconnect() used for 206 * forced device disconnection from host. 207 */ 208 extern void udc_disconnect(void); 209 210 /* 211 * board-specific hardware initialization, called by 212 * usb drivers and u-boot commands 213 * 214 * @param index USB controller number 215 * @param init initializes controller as USB host or device 216 */ 217 int board_usb_init(int index, enum usb_init_type init); 218 219 /* 220 * can be used to clean up after failed USB initialization attempt 221 * vide: board_usb_init() 222 * 223 * @param index USB controller number for selective cleanup 224 * @param init usb_init_type passed to board_usb_init() 225 */ 226 int board_usb_cleanup(int index, enum usb_init_type init); 227 228 #ifdef CONFIG_USB_STORAGE 229 230 #define USB_MAX_STOR_DEV 7 231 int usb_stor_scan(int mode); 232 int usb_stor_info(void); 233 234 #endif 235 236 #ifdef CONFIG_USB_HOST_ETHER 237 238 #define USB_MAX_ETH_DEV 5 239 int usb_host_eth_scan(int mode); 240 241 #endif 242 243 #ifdef CONFIG_USB_KEYBOARD 244 245 int drv_usb_kbd_init(void); 246 int usb_kbd_deregister(int force); 247 248 #endif 249 /* routines */ 250 int usb_init(void); /* initialize the USB Controller */ 251 int usb_stop(void); /* stop the USB Controller */ 252 int usb_detect_change(void); /* detect if a USB device has been (un)plugged */ 253 254 255 int usb_set_protocol(struct usb_device *dev, int ifnum, int protocol); 256 int usb_set_idle(struct usb_device *dev, int ifnum, int duration, 257 int report_id); 258 int usb_control_msg(struct usb_device *dev, unsigned int pipe, 259 unsigned char request, unsigned char requesttype, 260 unsigned short value, unsigned short index, 261 void *data, unsigned short size, int timeout); 262 int usb_bulk_msg(struct usb_device *dev, unsigned int pipe, 263 void *data, int len, int *actual_length, int timeout); 264 int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe, 265 void *buffer, int transfer_len, int interval); 266 int usb_disable_asynch(int disable); 267 int usb_maxpacket(struct usb_device *dev, unsigned long pipe); 268 int usb_get_configuration_no(struct usb_device *dev, int cfgno, 269 unsigned char *buffer, int length); 270 int usb_get_configuration_len(struct usb_device *dev, int cfgno); 271 int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type, 272 unsigned char id, void *buf, int size); 273 int usb_get_class_descriptor(struct usb_device *dev, int ifnum, 274 unsigned char type, unsigned char id, void *buf, 275 int size); 276 int usb_clear_halt(struct usb_device *dev, int pipe); 277 int usb_string(struct usb_device *dev, int index, char *buf, size_t size); 278 int usb_set_interface(struct usb_device *dev, int interface, int alternate); 279 int usb_get_port_status(struct usb_device *dev, int port, void *data); 280 281 /* big endian -> little endian conversion */ 282 /* some CPUs are already little endian e.g. the ARM920T */ 283 #define __swap_16(x) \ 284 ({ unsigned short x_ = (unsigned short)x; \ 285 (unsigned short)( \ 286 ((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8)); \ 287 }) 288 #define __swap_32(x) \ 289 ({ unsigned long x_ = (unsigned long)x; \ 290 (unsigned long)( \ 291 ((x_ & 0x000000FFUL) << 24) | \ 292 ((x_ & 0x0000FF00UL) << 8) | \ 293 ((x_ & 0x00FF0000UL) >> 8) | \ 294 ((x_ & 0xFF000000UL) >> 24)); \ 295 }) 296 297 #ifdef __LITTLE_ENDIAN 298 # define swap_16(x) (x) 299 # define swap_32(x) (x) 300 #else 301 # define swap_16(x) __swap_16(x) 302 # define swap_32(x) __swap_32(x) 303 #endif 304 305 /* 306 * Calling this entity a "pipe" is glorifying it. A USB pipe 307 * is something embarrassingly simple: it basically consists 308 * of the following information: 309 * - device number (7 bits) 310 * - endpoint number (4 bits) 311 * - current Data0/1 state (1 bit) 312 * - direction (1 bit) 313 * - speed (2 bits) 314 * - max packet size (2 bits: 8, 16, 32 or 64) 315 * - pipe type (2 bits: control, interrupt, bulk, isochronous) 316 * 317 * That's 18 bits. Really. Nothing more. And the USB people have 318 * documented these eighteen bits as some kind of glorious 319 * virtual data structure. 320 * 321 * Let's not fall in that trap. We'll just encode it as a simple 322 * unsigned int. The encoding is: 323 * 324 * - max size: bits 0-1 (00 = 8, 01 = 16, 10 = 32, 11 = 64) 325 * - direction: bit 7 (0 = Host-to-Device [Out], 326 * (1 = Device-to-Host [In]) 327 * - device: bits 8-14 328 * - endpoint: bits 15-18 329 * - Data0/1: bit 19 330 * - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt, 331 * 10 = control, 11 = bulk) 332 * 333 * Why? Because it's arbitrary, and whatever encoding we select is really 334 * up to us. This one happens to share a lot of bit positions with the UHCI 335 * specification, so that much of the uhci driver can just mask the bits 336 * appropriately. 337 */ 338 /* Create various pipes... */ 339 #define create_pipe(dev,endpoint) \ 340 (((dev)->devnum << 8) | ((endpoint) << 15) | \ 341 (dev)->maxpacketsize) 342 #define default_pipe(dev) ((dev)->speed << 26) 343 344 #define usb_sndctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \ 345 create_pipe(dev, endpoint)) 346 #define usb_rcvctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \ 347 create_pipe(dev, endpoint) | \ 348 USB_DIR_IN) 349 #define usb_sndisocpipe(dev, endpoint) ((PIPE_ISOCHRONOUS << 30) | \ 350 create_pipe(dev, endpoint)) 351 #define usb_rcvisocpipe(dev, endpoint) ((PIPE_ISOCHRONOUS << 30) | \ 352 create_pipe(dev, endpoint) | \ 353 USB_DIR_IN) 354 #define usb_sndbulkpipe(dev, endpoint) ((PIPE_BULK << 30) | \ 355 create_pipe(dev, endpoint)) 356 #define usb_rcvbulkpipe(dev, endpoint) ((PIPE_BULK << 30) | \ 357 create_pipe(dev, endpoint) | \ 358 USB_DIR_IN) 359 #define usb_sndintpipe(dev, endpoint) ((PIPE_INTERRUPT << 30) | \ 360 create_pipe(dev, endpoint)) 361 #define usb_rcvintpipe(dev, endpoint) ((PIPE_INTERRUPT << 30) | \ 362 create_pipe(dev, endpoint) | \ 363 USB_DIR_IN) 364 #define usb_snddefctrl(dev) ((PIPE_CONTROL << 30) | \ 365 default_pipe(dev)) 366 #define usb_rcvdefctrl(dev) ((PIPE_CONTROL << 30) | \ 367 default_pipe(dev) | \ 368 USB_DIR_IN) 369 370 /* The D0/D1 toggle bits */ 371 #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> ep) & 1) 372 #define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << ep)) 373 #define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = \ 374 ((dev)->toggle[out] & \ 375 ~(1 << ep)) | ((bit) << ep)) 376 377 /* Endpoint halt control/status */ 378 #define usb_endpoint_out(ep_dir) (((ep_dir >> 7) & 1) ^ 1) 379 #define usb_endpoint_halt(dev, ep, out) ((dev)->halted[out] |= (1 << (ep))) 380 #define usb_endpoint_running(dev, ep, out) ((dev)->halted[out] &= ~(1 << (ep))) 381 #define usb_endpoint_halted(dev, ep, out) ((dev)->halted[out] & (1 << (ep))) 382 383 #define usb_packetid(pipe) (((pipe) & USB_DIR_IN) ? USB_PID_IN : \ 384 USB_PID_OUT) 385 386 #define usb_pipeout(pipe) ((((pipe) >> 7) & 1) ^ 1) 387 #define usb_pipein(pipe) (((pipe) >> 7) & 1) 388 #define usb_pipedevice(pipe) (((pipe) >> 8) & 0x7f) 389 #define usb_pipe_endpdev(pipe) (((pipe) >> 8) & 0x7ff) 390 #define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf) 391 #define usb_pipedata(pipe) (((pipe) >> 19) & 1) 392 #define usb_pipetype(pipe) (((pipe) >> 30) & 3) 393 #define usb_pipeisoc(pipe) (usb_pipetype((pipe)) == PIPE_ISOCHRONOUS) 394 #define usb_pipeint(pipe) (usb_pipetype((pipe)) == PIPE_INTERRUPT) 395 #define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL) 396 #define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK) 397 398 #define usb_pipe_ep_index(pipe) \ 399 usb_pipecontrol(pipe) ? (usb_pipeendpoint(pipe) * 2) : \ 400 ((usb_pipeendpoint(pipe) * 2) - \ 401 (usb_pipein(pipe) ? 0 : 1)) 402 403 /** 404 * struct usb_device_id - identifies USB devices for probing and hotplugging 405 * @match_flags: Bit mask controlling which of the other fields are used to 406 * match against new devices. Any field except for driver_info may be 407 * used, although some only make sense in conjunction with other fields. 408 * This is usually set by a USB_DEVICE_*() macro, which sets all 409 * other fields in this structure except for driver_info. 410 * @idVendor: USB vendor ID for a device; numbers are assigned 411 * by the USB forum to its members. 412 * @idProduct: Vendor-assigned product ID. 413 * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers. 414 * This is also used to identify individual product versions, for 415 * a range consisting of a single device. 416 * @bcdDevice_hi: High end of version number range. The range of product 417 * versions is inclusive. 418 * @bDeviceClass: Class of device; numbers are assigned 419 * by the USB forum. Products may choose to implement classes, 420 * or be vendor-specific. Device classes specify behavior of all 421 * the interfaces on a device. 422 * @bDeviceSubClass: Subclass of device; associated with bDeviceClass. 423 * @bDeviceProtocol: Protocol of device; associated with bDeviceClass. 424 * @bInterfaceClass: Class of interface; numbers are assigned 425 * by the USB forum. Products may choose to implement classes, 426 * or be vendor-specific. Interface classes specify behavior only 427 * of a given interface; other interfaces may support other classes. 428 * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass. 429 * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass. 430 * @bInterfaceNumber: Number of interface; composite devices may use 431 * fixed interface numbers to differentiate between vendor-specific 432 * interfaces. 433 * @driver_info: Holds information used by the driver. Usually it holds 434 * a pointer to a descriptor understood by the driver, or perhaps 435 * device flags. 436 * 437 * In most cases, drivers will create a table of device IDs by using 438 * USB_DEVICE(), or similar macros designed for that purpose. 439 * They will then export it to userspace using MODULE_DEVICE_TABLE(), 440 * and provide it to the USB core through their usb_driver structure. 441 * 442 * See the usb_match_id() function for information about how matches are 443 * performed. Briefly, you will normally use one of several macros to help 444 * construct these entries. Each entry you provide will either identify 445 * one or more specific products, or will identify a class of products 446 * which have agreed to behave the same. You should put the more specific 447 * matches towards the beginning of your table, so that driver_info can 448 * record quirks of specific products. 449 */ 450 struct usb_device_id { 451 /* which fields to match against? */ 452 u16 match_flags; 453 454 /* Used for product specific matches; range is inclusive */ 455 u16 idVendor; 456 u16 idProduct; 457 u16 bcdDevice_lo; 458 u16 bcdDevice_hi; 459 460 /* Used for device class matches */ 461 u8 bDeviceClass; 462 u8 bDeviceSubClass; 463 u8 bDeviceProtocol; 464 465 /* Used for interface class matches */ 466 u8 bInterfaceClass; 467 u8 bInterfaceSubClass; 468 u8 bInterfaceProtocol; 469 470 /* Used for vendor-specific interface matches */ 471 u8 bInterfaceNumber; 472 473 /* not matched against */ 474 ulong driver_info; 475 }; 476 477 /* Some useful macros to use to create struct usb_device_id */ 478 #define USB_DEVICE_ID_MATCH_VENDOR 0x0001 479 #define USB_DEVICE_ID_MATCH_PRODUCT 0x0002 480 #define USB_DEVICE_ID_MATCH_DEV_LO 0x0004 481 #define USB_DEVICE_ID_MATCH_DEV_HI 0x0008 482 #define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010 483 #define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020 484 #define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040 485 #define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080 486 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100 487 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200 488 #define USB_DEVICE_ID_MATCH_INT_NUMBER 0x0400 489 490 /* Match anything, indicates this is a valid entry even if everything is 0 */ 491 #define USB_DEVICE_ID_MATCH_NONE 0x0800 492 #define USB_DEVICE_ID_MATCH_ALL 0x07ff 493 494 /** 495 * struct usb_driver_entry - Matches a driver to its usb_device_ids 496 * @driver: Driver to use 497 * @match: List of match records for this driver, terminated by {} 498 */ 499 struct usb_driver_entry { 500 struct driver *driver; 501 const struct usb_device_id *match; 502 }; 503 504 #define USB_DEVICE_ID_MATCH_DEVICE \ 505 (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT) 506 507 /** 508 * USB_DEVICE - macro used to describe a specific usb device 509 * @vend: the 16 bit USB Vendor ID 510 * @prod: the 16 bit USB Product ID 511 * 512 * This macro is used to create a struct usb_device_id that matches a 513 * specific device. 514 */ 515 #define USB_DEVICE(vend, prod) \ 516 .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ 517 .idVendor = (vend), \ 518 .idProduct = (prod) 519 520 #define U_BOOT_USB_DEVICE(__name, __match) \ 521 ll_entry_declare(struct usb_driver_entry, __name, usb_driver_entry) = {\ 522 .driver = llsym(struct driver, __name, driver), \ 523 .match = __match, \ 524 } 525 526 /************************************************************************* 527 * Hub Stuff 528 */ 529 struct usb_port_status { 530 unsigned short wPortStatus; 531 unsigned short wPortChange; 532 } __attribute__ ((packed)); 533 534 struct usb_hub_status { 535 unsigned short wHubStatus; 536 unsigned short wHubChange; 537 } __attribute__ ((packed)); 538 539 /* 540 * Hub Device descriptor 541 * USB Hub class device protocols 542 */ 543 #define USB_HUB_PR_FS 0 /* Full speed hub */ 544 #define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ 545 #define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ 546 #define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ 547 #define USB_HUB_PR_SS 3 /* Super speed hub */ 548 549 /* Transaction Translator Think Times, in bits */ 550 #define HUB_TTTT_8_BITS 0x00 551 #define HUB_TTTT_16_BITS 0x20 552 #define HUB_TTTT_24_BITS 0x40 553 #define HUB_TTTT_32_BITS 0x60 554 555 /* Hub descriptor */ 556 struct usb_hub_descriptor { 557 unsigned char bLength; 558 unsigned char bDescriptorType; 559 unsigned char bNbrPorts; 560 unsigned short wHubCharacteristics; 561 unsigned char bPwrOn2PwrGood; 562 unsigned char bHubContrCurrent; 563 /* 2.0 and 3.0 hubs differ here */ 564 union { 565 struct { 566 /* add 1 bit for hub status change; round to bytes */ 567 __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; 568 __u8 PortPowerCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; 569 } __attribute__ ((packed)) hs; 570 571 struct { 572 __u8 bHubHdrDecLat; 573 __le16 wHubDelay; 574 __le16 DeviceRemovable; 575 } __attribute__ ((packed)) ss; 576 } u; 577 } __attribute__ ((packed)); 578 579 580 struct usb_hub_device { 581 struct usb_device *pusb_dev; 582 struct usb_hub_descriptor desc; 583 584 ulong connect_timeout; /* Device connection timeout in ms */ 585 ulong query_delay; /* Device query delay in ms */ 586 int overcurrent_count[USB_MAXCHILDREN]; /* Over-current counter */ 587 int hub_depth; /* USB 3.0 hub depth */ 588 struct usb_tt tt; /* Transaction Translator */ 589 }; 590 591 #ifdef CONFIG_DM_USB 592 /** 593 * struct usb_platdata - Platform data about a USB controller 594 * 595 * Given a USB controller (UCLASS_USB) dev this is dev_get_platdata(dev) 596 */ 597 struct usb_platdata { 598 enum usb_init_type init_type; 599 }; 600 601 /** 602 * struct usb_dev_platdata - Platform data about a USB device 603 * 604 * Given a USB device dev this structure is dev_get_parent_platdata(dev). 605 * This is used by sandbox to provide emulation data also. 606 * 607 * @id: ID used to match this device 608 * @devnum: Device address on the USB bus 609 * @udev: usb-uclass internal use only do NOT use 610 * @strings: List of descriptor strings (for sandbox emulation purposes) 611 * @desc_list: List of descriptors (for sandbox emulation purposes) 612 */ 613 struct usb_dev_platdata { 614 struct usb_device_id id; 615 int devnum; 616 /* 617 * This pointer is used to pass the usb_device used in usb_scan_device, 618 * to get the usb descriptors before the driver is known, to the 619 * actual udevice once the driver is known and the udevice is created. 620 * This will be NULL except during probe, do NOT use. 621 * 622 * This should eventually go away. 623 */ 624 struct usb_device *udev; 625 #ifdef CONFIG_SANDBOX 626 struct usb_string *strings; 627 /* NULL-terminated list of descriptor pointers */ 628 struct usb_generic_descriptor **desc_list; 629 #endif 630 int configno; 631 }; 632 633 /** 634 * struct usb_bus_priv - information about the USB controller 635 * 636 * Given a USB controller (UCLASS_USB) 'dev', this is 637 * dev_get_uclass_priv(dev). 638 * 639 * @next_addr: Next device address to allocate minus 1. Incremented by 1 640 * each time a new device address is set, so this holds the 641 * number of devices on the bus 642 * @desc_before_addr: true if we can read a device descriptor before it 643 * has been assigned an address. For XHCI this is not possible 644 * so this will be false. 645 * @companion: True if this is a companion controller to another USB 646 * controller 647 */ 648 struct usb_bus_priv { 649 int next_addr; 650 bool desc_before_addr; 651 bool companion; 652 }; 653 654 /** 655 * struct usb_emul_platdata - platform data about the USB emulator 656 * 657 * Given a USB emulator (UCLASS_USB_EMUL) 'dev', this is 658 * dev_get_uclass_platdata(dev). 659 * 660 * @port1: USB emulator device port number on the parent hub 661 */ 662 struct usb_emul_platdata { 663 int port1; /* Port number (numbered from 1) */ 664 }; 665 666 /** 667 * struct dm_usb_ops - USB controller operations 668 * 669 * This defines the operations supoorted on a USB controller. Common 670 * arguments are: 671 * 672 * @bus: USB bus (i.e. controller), which is in UCLASS_USB. 673 * @udev: USB device parent data. Controllers are not expected to need 674 * this, since the device address on the bus is encoded in @pipe. 675 * It is used for sandbox, and can be handy for debugging and 676 * logging. 677 * @pipe: An assortment of bitfields which provide address and packet 678 * type information. See create_pipe() above for encoding 679 * details 680 * @buffer: A buffer to use for sending/receiving. This should be 681 * DMA-aligned. 682 * @length: Buffer length in bytes 683 */ 684 struct dm_usb_ops { 685 /** 686 * control() - Send a control message 687 * 688 * Most parameters are as above. 689 * 690 * @setup: Additional setup information required by the message 691 */ 692 int (*control)(struct udevice *bus, struct usb_device *udev, 693 unsigned long pipe, void *buffer, int length, 694 struct devrequest *setup); 695 /** 696 * bulk() - Send a bulk message 697 * 698 * Parameters are as above. 699 */ 700 int (*bulk)(struct udevice *bus, struct usb_device *udev, 701 unsigned long pipe, void *buffer, int length); 702 /** 703 * interrupt() - Send an interrupt message 704 * 705 * Most parameters are as above. 706 * 707 * @interval: Interrupt interval 708 */ 709 int (*interrupt)(struct udevice *bus, struct usb_device *udev, 710 unsigned long pipe, void *buffer, int length, 711 int interval); 712 713 /** 714 * create_int_queue() - Create and queue interrupt packets 715 * 716 * Create and queue @queuesize number of interrupt usb packets of 717 * @elementsize bytes each. @buffer must be atleast @queuesize * 718 * @elementsize bytes. 719 * 720 * Note some controllers only support a queuesize of 1. 721 * 722 * @interval: Interrupt interval 723 * 724 * @return A pointer to the created interrupt queue or NULL on error 725 */ 726 struct int_queue * (*create_int_queue)(struct udevice *bus, 727 struct usb_device *udev, unsigned long pipe, 728 int queuesize, int elementsize, void *buffer, 729 int interval); 730 731 /** 732 * poll_int_queue() - Poll an interrupt queue for completed packets 733 * 734 * Poll an interrupt queue for completed packets. The return value 735 * points to the part of the buffer passed to create_int_queue() 736 * corresponding to the completed packet. 737 * 738 * @queue: queue to poll 739 * 740 * @return Pointer to the data of the first completed packet, or 741 * NULL if no packets are ready 742 */ 743 void * (*poll_int_queue)(struct udevice *bus, struct usb_device *udev, 744 struct int_queue *queue); 745 746 /** 747 * destroy_int_queue() - Destroy an interrupt queue 748 * 749 * Destroy an interrupt queue created by create_int_queue(). 750 * 751 * @queue: queue to poll 752 * 753 * @return 0 if OK, -ve on error 754 */ 755 int (*destroy_int_queue)(struct udevice *bus, struct usb_device *udev, 756 struct int_queue *queue); 757 758 /** 759 * alloc_device() - Allocate a new device context (XHCI) 760 * 761 * Before sending packets to a new device on an XHCI bus, a device 762 * context must be created. If this method is not NULL it will be 763 * called before the device is enumerated (even before its descriptor 764 * is read). This should be NULL for EHCI, which does not need this. 765 */ 766 int (*alloc_device)(struct udevice *bus, struct usb_device *udev); 767 768 /** 769 * reset_root_port() - Reset usb root port 770 */ 771 int (*reset_root_port)(struct udevice *bus, struct usb_device *udev); 772 773 /** 774 * update_hub_device() - Update HCD's internal representation of hub 775 * 776 * After a hub descriptor is fetched, notify HCD so that its internal 777 * representation of this hub can be updated (xHCI) 778 */ 779 int (*update_hub_device)(struct udevice *bus, struct usb_device *udev); 780 781 /** 782 * get_max_xfer_size() - Get HCD's maximum transfer bytes 783 * 784 * The HCD may have limitation on the maximum bytes to be transferred 785 * in a USB transfer. USB class driver needs to be aware of this. 786 */ 787 int (*get_max_xfer_size)(struct udevice *bus, size_t *size); 788 }; 789 790 #define usb_get_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops) 791 #define usb_get_emul_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops) 792 793 /** 794 * usb_get_dev_index() - look up a device index number 795 * 796 * Look up devices using their index number (starting at 0). This works since 797 * in U-Boot device addresses are allocated starting at 1 with no gaps. 798 * 799 * TODO(sjg (at) chromium.org): Remove this function when usb_ether.c is modified 800 * to work better with driver model. 801 * 802 * @bus: USB bus to check 803 * @index: Index number of device to find (0=first). This is just the 804 * device address less 1. 805 */ 806 struct usb_device *usb_get_dev_index(struct udevice *bus, int index); 807 808 /** 809 * usb_setup_device() - set up a device ready for use 810 * 811 * @dev: USB device pointer. This need not be a real device - it is 812 * common for it to just be a local variable with its ->dev 813 * member (i.e. @dev->dev) set to the parent device and 814 * dev->portnr set to the port number on the hub (1=first) 815 * @do_read: true to read the device descriptor before an address is set 816 * (should be false for XHCI buses, true otherwise) 817 * @parent: Parent device (either UCLASS_USB or UCLASS_USB_HUB) 818 * @return 0 if OK, -ve on error */ 819 int usb_setup_device(struct usb_device *dev, bool do_read, 820 struct usb_device *parent); 821 822 /** 823 * usb_hub_is_root_hub() - Test whether a hub device is root hub or not 824 * 825 * @hub: USB hub device to test 826 * @return: true if the hub device is root hub, false otherwise. 827 */ 828 bool usb_hub_is_root_hub(struct udevice *hub); 829 830 /** 831 * usb_hub_scan() - Scan a hub and find its devices 832 * 833 * @hub: Hub device to scan 834 */ 835 int usb_hub_scan(struct udevice *hub); 836 837 /** 838 * usb_scan_device() - Scan a device on a bus 839 * 840 * Scan a device on a bus. It has already been detected and is ready to 841 * be enumerated. This may be either the root hub (@parent is a bus) or a 842 * normal device (@parent is a hub) 843 * 844 * @parent: Parent device 845 * @port: Hub port number (numbered from 1) 846 * @speed: USB speed to use for this device 847 * @devp: Returns pointer to device if all is well 848 * @return 0 if OK, -ve on error 849 */ 850 int usb_scan_device(struct udevice *parent, int port, 851 enum usb_device_speed speed, struct udevice **devp); 852 853 /** 854 * usb_get_bus() - Find the bus for a device 855 * 856 * Search up through parents to find the bus this device is connected to. This 857 * will be a device with uclass UCLASS_USB. 858 * 859 * @dev: Device to check 860 * @return The bus, or NULL if not found (this indicates a critical error in 861 * the USB stack 862 */ 863 struct udevice *usb_get_bus(struct udevice *dev); 864 865 /** 866 * usb_select_config() - Set up a device ready for use 867 * 868 * This function assumes that the device already has an address and a driver 869 * bound, and is ready to be set up. 870 * 871 * This re-reads the device and configuration descriptors and sets the 872 * configuration 873 * 874 * @dev: Device to set up 875 */ 876 int usb_select_config(struct usb_device *dev); 877 878 /** 879 * usb_child_pre_probe() - Pre-probe function for USB devices 880 * 881 * This is called on all children of hubs and USB controllers (i.e. UCLASS_USB 882 * and UCLASS_USB_HUB) when a new device is about to be probed. It sets up the 883 * device from the saved platform data and calls usb_select_config() to 884 * finish set up. 885 * 886 * Once this is done, the device's normal driver can take over, knowing the 887 * device is accessible on the USB bus. 888 * 889 * This function is for use only by the internal USB stack. 890 * 891 * @dev: Device to set up 892 */ 893 int usb_child_pre_probe(struct udevice *dev); 894 895 struct ehci_ctrl; 896 897 /** 898 * usb_setup_ehci_gadget() - Set up a USB device as a gadget 899 * 900 * TODO(sjg (at) chromium.org): Tidy this up when USB gadgets can use driver model 901 * 902 * This provides a way to tell a controller to start up as a USB device 903 * instead of as a host. It is untested. 904 */ 905 int usb_setup_ehci_gadget(struct ehci_ctrl **ctlrp); 906 907 /** 908 * usb_stor_reset() - Prepare to scan USB storage devices 909 * 910 * Empty the list of USB storage devices in preparation for scanning them. 911 * This must be called before a USB scan. 912 */ 913 void usb_stor_reset(void); 914 915 #else /* !CONFIG_DM_USB */ 916 917 struct usb_device *usb_get_dev_index(int index); 918 919 #endif 920 921 bool usb_device_has_child_on_port(struct usb_device *parent, int port); 922 923 int usb_hub_probe(struct usb_device *dev, int ifnum); 924 void usb_hub_reset(void); 925 926 /* 927 * usb_find_usb2_hub_address_port() - Get hub address and port for TT setting 928 * 929 * Searches for the first HS hub above the given device. If a 930 * HS hub is found, the hub address and the port the device is 931 * connected to is return, as required for SPLIT transactions 932 * 933 * @param: udev full speed or low speed device 934 */ 935 void usb_find_usb2_hub_address_port(struct usb_device *udev, 936 uint8_t *hub_address, uint8_t *hub_port); 937 938 /** 939 * usb_alloc_new_device() - Allocate a new device 940 * 941 * @devp: returns a pointer of a new device structure. With driver model this 942 * is a device pointer, but with legacy USB this pointer is 943 * driver-specific. 944 * @return 0 if OK, -ENOSPC if we have found out of room for new devices 945 */ 946 int usb_alloc_new_device(struct udevice *controller, struct usb_device **devp); 947 948 /** 949 * usb_free_device() - Free a partially-inited device 950 * 951 * This is an internal function. It is used to reverse the action of 952 * usb_alloc_new_device() when we hit a problem during init. 953 */ 954 void usb_free_device(struct udevice *controller); 955 956 int usb_new_device(struct usb_device *dev); 957 958 int usb_alloc_device(struct usb_device *dev); 959 960 /** 961 * usb_update_hub_device() - Update HCD's internal representation of hub 962 * 963 * After a hub descriptor is fetched, notify HCD so that its internal 964 * representation of this hub can be updated. 965 * 966 * @dev: Hub device 967 * @return 0 if OK, -ve on error 968 */ 969 int usb_update_hub_device(struct usb_device *dev); 970 971 /** 972 * usb_get_max_xfer_size() - Get HCD's maximum transfer bytes 973 * 974 * The HCD may have limitation on the maximum bytes to be transferred 975 * in a USB transfer. USB class driver needs to be aware of this. 976 * 977 * @dev: USB device 978 * @size: maximum transfer bytes 979 * @return 0 if OK, -ve on error 980 */ 981 int usb_get_max_xfer_size(struct usb_device *dev, size_t *size); 982 983 /** 984 * usb_emul_setup_device() - Set up a new USB device emulation 985 * 986 * This is normally called when a new emulation device is bound. It tells 987 * the USB emulation uclass about the features of the emulator. 988 * 989 * @dev: Emulation device 990 * @strings: List of USB string descriptors, terminated by a NULL 991 * entry 992 * @desc_list: List of points or USB descriptors, terminated by NULL. 993 * The first entry must be struct usb_device_descriptor, 994 * and others follow on after that. 995 * @return 0 if OK, -ENOSYS if not implemented, other -ve on error 996 */ 997 int usb_emul_setup_device(struct udevice *dev, struct usb_string *strings, 998 void **desc_list); 999 1000 /** 1001 * usb_emul_control() - Send a control packet to an emulator 1002 * 1003 * @emul: Emulator device 1004 * @udev: USB device (which the emulator is causing to appear) 1005 * See struct dm_usb_ops for details on other parameters 1006 * @return 0 if OK, -ve on error 1007 */ 1008 int usb_emul_control(struct udevice *emul, struct usb_device *udev, 1009 unsigned long pipe, void *buffer, int length, 1010 struct devrequest *setup); 1011 1012 /** 1013 * usb_emul_bulk() - Send a bulk packet to an emulator 1014 * 1015 * @emul: Emulator device 1016 * @udev: USB device (which the emulator is causing to appear) 1017 * See struct dm_usb_ops for details on other parameters 1018 * @return 0 if OK, -ve on error 1019 */ 1020 int usb_emul_bulk(struct udevice *emul, struct usb_device *udev, 1021 unsigned long pipe, void *buffer, int length); 1022 1023 /** 1024 * usb_emul_int() - Send an interrupt packet to an emulator 1025 * 1026 * @emul: Emulator device 1027 * @udev: USB device (which the emulator is causing to appear) 1028 * See struct dm_usb_ops for details on other parameters 1029 * @return 0 if OK, -ve on error 1030 */ 1031 int usb_emul_int(struct udevice *emul, struct usb_device *udev, 1032 unsigned long pipe, void *buffer, int length, int interval); 1033 1034 /** 1035 * usb_emul_find() - Find an emulator for a particular device 1036 * 1037 * Check @pipe and @port1 to find a device number on bus @bus and return it. 1038 * 1039 * @bus: USB bus (controller) 1040 * @pipe: Describes pipe being used, and includes the device number 1041 * @port1: Describes port number on the parent hub 1042 * @emulp: Returns pointer to emulator, or NULL if not found 1043 * @return 0 if found, -ve on error 1044 */ 1045 int usb_emul_find(struct udevice *bus, ulong pipe, int port1, 1046 struct udevice **emulp); 1047 1048 /** 1049 * usb_emul_find_for_dev() - Find an emulator for a particular device 1050 * 1051 * @dev: USB device to check 1052 * @emulp: Returns pointer to emulator, or NULL if not found 1053 * @return 0 if found, -ve on error 1054 */ 1055 int usb_emul_find_for_dev(struct udevice *dev, struct udevice **emulp); 1056 1057 /** 1058 * usb_emul_find_descriptor() - Find a USB descriptor of a particular device 1059 * 1060 * @ptr: a pointer to a list of USB descriptor pointers 1061 * @type: type of USB descriptor to find 1062 * @index: if @type is USB_DT_CONFIG, this is the configuration value 1063 * @return a pointer to the USB descriptor found, NULL if not found 1064 */ 1065 struct usb_generic_descriptor **usb_emul_find_descriptor( 1066 struct usb_generic_descriptor **ptr, int type, int index); 1067 1068 /** 1069 * usb_show_tree() - show the USB device tree 1070 * 1071 * This shows a list of active USB devices along with basic information about 1072 * each. 1073 */ 1074 void usb_show_tree(void); 1075 1076 #endif /*_USB_H_ */ 1077
