| /external/u-boot/arch/arm/mach-at91/include/mach/ |
| atmel_serial.h | 11 uint32_t base_addr; member in struct:atmel_serial_platdata
|
| /device/linaro/bootloader/arm-trusted-firmware/plat/arm/board/common/drivers/norflash/ |
| norflash.c | 35 static unsigned int nor_status(uintptr_t base_addr)
39 nor_send_cmd(base_addr, NOR_CMD_READ_STATUS_REG);
40 status = mmio_read_32(base_addr);
52 static int nor_poll_dws(uintptr_t base_addr, unsigned long int retries)
57 nor_send_cmd(base_addr, NOR_CMD_READ_STATUS_REG);
58 status = mmio_read_32(base_addr);
72 static int nor_full_status_check(uintptr_t base_addr)
77 status = nor_status(base_addr);
86 void nor_send_cmd(uintptr_t base_addr, unsigned long cmd)
88 mmio_write_32(base_addr, NOR_2X16(cmd))
[all...] |
| /device/linaro/bootloader/arm-trusted-firmware/include/drivers/arm/ |
| pl061_gpio.h | 12 void pl061_gpio_register(uintptr_t base_addr, int gpio_dev);
|
| sp804_delay_timer.h | 16 void sp804_timer_ops_init(uintptr_t base_addr, const timer_ops_t *ops);
18 #define sp804_timer_init(base_addr, clk_mult, clk_div) \
25 sp804_timer_ops_init((base_addr), &sp804_timer_ops); \
|
| /external/u-boot/arch/x86/include/asm/ |
| gpio.h | 12 uint16_t base_addr; member in struct:ich6_bank_platdata
|
| /device/linaro/bootloader/arm-trusted-firmware/include/plat/arm/board/common/drivers/ |
| norflash.h | 39 void nor_send_cmd(uintptr_t base_addr, unsigned long cmd);
40 int nor_word_program(uintptr_t base_addr, unsigned long data);
41 int nor_lock(uintptr_t base_addr);
42 int nor_unlock(uintptr_t base_addr);
43 int nor_erase(uintptr_t base_addr);
|
| /device/linaro/bootloader/arm-trusted-firmware/drivers/arm/pl061/ |
| pl061_gpio.c | 49 uintptr_t base_addr; local
54 base_addr = pl061_reg_base[gpio / GPIOS_PER_PL061];
56 data = mmio_read_8(base_addr + PL061_GPIO_DIR);
64 uintptr_t base_addr; local
69 base_addr = pl061_reg_base[gpio / GPIOS_PER_PL061];
72 data = mmio_read_8(base_addr + PL061_GPIO_DIR) | BIT(offset);
73 mmio_write_8(base_addr + PL061_GPIO_DIR, data);
75 data = mmio_read_8(base_addr + PL061_GPIO_DIR) & ~BIT(offset);
76 mmio_write_8(base_addr + PL061_GPIO_DIR, data);
90 uintptr_t base_addr; local
109 uintptr_t base_addr; local
[all...] |
| /device/linaro/bootloader/arm-trusted-firmware/include/drivers/ |
| console.h | 12 int console_init(uintptr_t base_addr,
|
| /bionic/libc/kernel/uapi/asm-x86/asm/ |
| ldt.h | 26 unsigned int base_addr; member in struct:user_desc
|
| /external/kernel-headers/original/uapi/asm-x86/asm/ |
| ldt.h | 23 unsigned int base_addr; member in struct:user_desc
|
| /device/linaro/bootloader/arm-trusted-firmware/include/lib/pmf/ |
| pmf_helpers.h | 71 uintptr_t base_addr = (uintptr_t) pmf_ts_mem_ ## _name; \
73 __pmf_store_timestamp(base_addr, tid, ts); \
83 uintptr_t base_addr = (uintptr_t) pmf_ts_mem_ ## _name; \
85 __pmf_store_timestamp_with_cache_maint(base_addr, tid, ts);\
98 uintptr_t base_addr = (uintptr_t) pmf_ts_mem_ ## _name; \
99 return __pmf_get_timestamp(base_addr, tid, cpuid, flags);\
105 uintptr_t base_addr = (uintptr_t) pmf_ts_mem_ ## _name; \
106 return __pmf_get_timestamp(base_addr, tid, \
135 void __pmf_store_timestamp(uintptr_t base_addr,
138 void __pmf_store_timestamp_with_cache_maint(uintptr_t base_addr,
[all...] |
| /external/u-boot/board/compulab/common/ |
| common.h | 27 int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
30 static inline int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
|
| omap3_smc911x.c | 30 static void cl_omap3_smc911x_setup_net_chip_gmpc(int cs, u32 base_addr)
35 &gpmc_cfg->cs[cs], base_addr, GPMC_SIZE_16M);
74 int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
79 cl_omap3_smc911x_setup_net_chip_gmpc(cs, base_addr);
86 ret = smc911x_initialize(id, base_addr);
|
| /external/u-boot/include/ |
| netdev.h | 32 int calxedaxgmac_initialize(u32 id, ulong base_addr);
33 int cs8900_initialize(u8 dev_num, int base_addr);
36 int designware_initialize(ulong base_addr, u32 interface);
41 int ep93xx_eth_initialize(u8 dev_num, int base_addr);
43 int ethoc_initialize(u8 dev_num, int base_addr);
51 int ks8851_mll_initialize(u8 dev_num, int base_addr);
52 int lan91c96_initialize(u8 dev_num, int base_addr);
58 int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr);
70 int smc91111_initialize(u8 dev_num, int base_addr);
71 int smc911x_initialize(u8 dev_num, int base_addr);
[all...] |
| /bionic/libc/arch-x86/bionic/ |
| __set_tls.cpp | 36 __LIBC_HIDDEN__ void __init_user_desc(user_desc* result, bool allocate, void* base_addr) {
47 result->base_addr = reinterpret_cast<uintptr_t>(base_addr);
|
| /device/linaro/bootloader/arm-trusted-firmware/drivers/arm/sp804/ |
| sp804_delay_timer.c | 39 void sp804_timer_ops_init(uintptr_t base_addr, const timer_ops_t *ops)
41 assert(base_addr != 0);
44 sp804_base_addr = base_addr;
|
| /device/linaro/bootloader/arm-trusted-firmware/lib/pmf/ |
| pmf_main.c | 190 * `base_addr`, `tid` and `cpuid`.
192 static inline uintptr_t calc_ts_addr(uintptr_t base_addr,
197 assert(base_addr >= PMF_TIMESTAMP_ARRAY_START);
198 assert(base_addr < ((PMF_TIMESTAMP_ARRAY_START +
202 base_addr += ((cpuid * PMF_PERCPU_TIMESTAMP_SIZE) +
205 return base_addr;
210 * `base_addr`, `tid` and current cpu id.
214 void __pmf_store_timestamp(uintptr_t base_addr,
218 unsigned long long *ts_addr = (unsigned long long *)calc_ts_addr(base_addr,
228 void __pmf_store_timestamp_with_cache_maint(uintptr_t base_addr,
[all...] |
| /bionic/linker/ |
| linker_wrapper.cpp | 60 ElfW(Addr) base_addr = 0;
64 &base_addr, &load_bias); local
66 ElfW(Addr) linker_addr = base_addr + reinterpret_cast<uintptr_t>(&linker_offset);
76 v->a_un.a_val = base_addr + original_start;
|
| /external/ltp/testcases/kernel/syscalls/set_thread_area/ |
| set_thread_area.h | 20 unsigned long int base_addr; member in struct:user_desc
|
| /external/u-boot/arch/arm/mach-socfpga/ |
| pinmux_arria10.c | 14 fdt_addr_t base_addr; local
19 base_addr = fdtdec_get_addr_size(blob, child, "reg", &size);
20 if (base_addr != FDT_ADDR_T_NONE) {
30 writel(value, base_addr + offset);
|
| /external/strace/tests/ |
| print_user_desc.c | 52 printf(", base_addr=%#08x"
64 us->base_addr,
|
| /external/strace/tests-m32/ |
| print_user_desc.c | 52 printf(", base_addr=%#08x"
64 us->base_addr,
|
| /external/strace/tests-mx32/ |
| print_user_desc.c | 52 printf(", base_addr=%#08x"
64 us->base_addr,
|
| /external/u-boot/arch/x86/lib/ |
| mrccache.c | 45 ulong base_addr, end_addr; local
48 base_addr = entry->base + entry->offset;
49 end_addr = base_addr + entry->length;
53 for (id = 0, next = (struct mrc_data_container *)base_addr;
90 ulong base_addr, end_addr; local
92 base_addr = entry->base + entry->offset;
93 end_addr = base_addr + entry->length;
113 ulong base_addr; local
120 base_addr = entry->base + entry->offset;
146 cache = (struct mrc_data_container *)base_addr;
[all...] |
| /external/f2fs-tools/fsck/ |
| xattr.c | 52 static struct f2fs_xattr_entry *__find_xattr(void *base_addr, int index,
56 list_for_each_xattr(entry, base_addr) {
120 void *base_addr; local
152 base_addr = read_all_xattrs(sbi, inode);
153 ASSERT(base_addr);
155 here = __find_xattr(base_addr, index, len, name);
180 free = MIN_OFFSET - ((char *)last - (char *)base_addr);
204 new_hsize = (char *)last - (char *)base_addr;
223 write_all_xattrs(sbi, inode, new_hsize, base_addr);
230 free(base_addr);
[all...] |
