/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Isa/Ps2KeyboardDxe/ |
Ps2Keyboard.h | 198 #define KEYBOARD_STATUS_REGISTER_INPUT_DATA_TYPE BIT3 ///< 0 - Data in input register is data; 1 - Data in input register is command
|
/device/linaro/bootloader/edk2/MdePkg/Include/IndustryStandard/ |
Acpi20.h | 214 #define EFI_ACPI_2_0_P_LVL2_UP BIT3
|
Acpi40.h | 191 #define EFI_ACPI_4_0_MSI_NOT_SUPPORTED BIT3
201 #define EFI_ACPI_4_0_P_LVL2_UP BIT3
[all...] |
Atapi.h | [all...] |
Pci22.h | 583 #define EFI_PCI_COMMAND_SPECIAL_CYCLE BIT3 ///< 0x0008
597 #define EFI_PCI_BRIDGE_CONTROL_VGA BIT3 ///< 0x0008
|
Acpi10.h | 476 #define EFI_ACPI_1_0_P_LVL2_UP BIT3
|
Pal.h | 642 #define PAL_TR_MEMORY_ATTR_IS_VALID BIT3
[all...] |
/device/linaro/bootloader/edk2/Omap35xxPkg/Include/Omap3530/ |
Omap3530MMCHS.h | 38 #define STR BIT3
|
/device/linaro/bootloader/edk2/OptionRomPkg/CirrusLogic5430Dxe/ |
CirrusLogic5430.h | 70 #define PIXEL_GREEN_MASK (BIT4 | BIT3 | BIT2)
|
/device/linaro/bootloader/edk2/OvmfPkg/QemuVideoDxe/ |
Qemu.h | 66 #define PIXEL_GREEN_MASK (BIT4 | BIT3 | BIT2)
|
VbeShim.c | 196 // bit3: set if color, clear if monochrome
201 VbeModeInfo->ModeAttr = BIT7 | BIT5 | BIT4 | BIT3 | BIT1 | BIT0;
|
/device/linaro/bootloader/edk2/QuarkSocPkg/QuarkSouthCluster/Include/ |
Ioh.h | 22 #define BIT3 0x08
|
/device/linaro/bootloader/edk2/QuarkSocPkg/QuarkSouthCluster/Sdio/Dxe/SDMediaDeviceDxe/ |
MMCSDTransfer.c | 797 } else if ((CardData->OCRRegister.V270_V360 & BIT3) == BIT3) {
[all...] |
CEATA.c | 345 if (((Data & BIT7) == 0) && ((Data & BIT3) == 0)) {
|
/device/linaro/bootloader/edk2/SourceLevelDebugPkg/Include/ |
TransferProtocol.h | 327 #define DEBUG_AGENT_VERBOSE BIT3
|
/device/linaro/bootloader/edk2/SourceLevelDebugPkg/Library/DebugAgent/DebugAgentCommon/ |
DebugAgent.h | 94 #define DEBUG_AGENT_FLAG_STEPPING BIT3
|
/device/linaro/bootloader/edk2/UefiCpuPkg/Library/SmmCpuFeaturesLib/Ia32/ |
SmiEntry.asm | 121 or eax, BIT3
260 or eax, BIT3
|
/device/linaro/bootloader/edk2/Vlv2TbltDevicePkg/MonoStatusCode/ |
PlatformStatusCode.c | 311 #define V_PCH_ILB_IRQE_UARTIRQEN_IRQ3 BIT3 // UART IRQ3 Enable
|
/external/kernel-headers/original/uapi/linux/ |
synclink.h | 22 #define BIT3 0x0008
|
/device/linaro/bootloader/OpenPlatformPkg/Chips/Hisilicon/Include/Library/ |
HwMemInitLib.h | 629 #define ODTS BIT3 // Bit location for On-die Thermal Sensor
750 #define SPD_TRR_IMMUNE BIT3 // Indicates this DIMM does not require DRAM Maintenance
[all...] |
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/ |
UfsHci.h | 70 #define UFS_HC_HCS_UCRDY BIT3
75 #define UFS_HC_CAP_NUTRS (BIT0 | BIT1 | BIT2 | BIT3 | BIT4)
[all...] |
/device/linaro/bootloader/edk2/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/ |
UfsPassThruHci.h | 70 #define UFS_HC_HCS_UCRDY BIT3
75 #define UFS_HC_CAP_NUTRS (BIT0 | BIT1 | BIT2 | BIT3 | BIT4)
[all...] |
/device/linaro/bootloader/edk2/UefiCpuPkg/PiSmmCpuDxeSmm/Ia32/ |
SmiEntry.asm | 120 or eax, BIT3
|
SmiEntry.S | 114 orl $BIT3, %eax
|
/device/linaro/bootloader/edk2/ArmPkg/Library/ArmDisassemblerLib/ |
ThumbDisassembler.c | 648 AsciiSPrint (&Buf[Offset], Size - Offset, " %a", (OpCode & BIT3) == 0 ? "LE":"BE");
675 Offset += AsciiSPrint (&Buf[Offset], Size - Offset, "%a%a%a", (Mask & BIT3)?"T":"E", (Mask & BIT2)?"T":"E", (Mask & BIT1)?"T":"E");
678 Offset += AsciiSPrint (&Buf[Offset], Size - Offset, "%a%a", (Mask & BIT3)?"T":"E", (Mask & BIT2)?"T":"E");
681 Offset += AsciiSPrint (&Buf[Offset], Size - Offset, "%a", (Mask & BIT3)?"T":"E");
[all...] |