Lines Matching full:clock
61 uint sd_clock = 1; /* Default to SD Clock turned ON */
550 sd_err(("set clock failed!\n"));
586 sd_info(("SD Clock turned ON.\n"));
592 /* turn off HC clock */
596 sd_info(("SD Clock turned OFF.\n"));
1502 /* Start at ~400KHz clock rate for initialization */
1597 /* After configuring for High-Speed mode, set the desired clock rate. */
1767 /* turn off HC clock */
1769 sdstd_rreg16(sd, SD_ClockCntrl) & ~((uint16)0x4)); /* Disable the HC clock */
1775 sd_info(("Clock control is 0x%x\n", sdstd_rreg16(sd, SD_ClockCntrl)));
1777 sd_info(("%s: Using clock divisor of %d (regval 0x%04x)\n", __FUNCTION__,
1780 sd_info(("Primary Clock Freq = %d MHz\n", GFIELD(sd->caps, CAP_TO_CLKFREQ)));
1783 sd_info(("%s: Resulting SDIO clock
1787 sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,
1791 sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,
1799 sd_err(("Consult SD Host Controller Spec: Clock Control Register\n"));
1803 sdstd_or_reg16(sd, SD_ClockCntrl, 0x1); /* Enable the clock */
1805 /* Wait for clock to stabilize */
1810 sd_info(("Waiting for clock to become stable 0x%x\n", rc));
1819 /* Turn on clock */
1845 sd_info(("Final Clock control is 0x%x\n", sdstd_rreg16(sd, SD_ClockCntrl)));
2905 /* Reset the attached device (use slower clock for safety) */
