Lines Matching refs:sd_err
100 sd_err(("%s: out of memory, malloced %d bytes\n", __FUNCTION__, MALLOCED(osh)));
106 sd_err(("%s: spi_osinit() failed\n", __FUNCTION__));
127 sd_err(("%s: spi_hw_attach() failed\n", __FUNCTION__));
134 sd_err(("%s: bcmspi_driver_init() failed()\n", __FUNCTION__));
142 sd_err(("%s: spi_register_irq() failed for irq = %d\n", __FUNCTION__, irq));
159 sd_err(("%s: detaching from hardware\n", __FUNCTION__));
234 sd_err(("%s: Failed to set dwordmode in gSPI\n", __FUNCTION__));
250 sd_err(("%s: Failed to set dwordmode in gSPI\n", __FUNCTION__));
396 sd_err(("%s: set clock failed\n", __FUNCTION__));
437 sd_err(("%s: Failed changing highspeed mode to %d.\n",
506 sd_err(("%s: Unable to set response delay.\n", __FUNCTION__));
514 sd_err(("%s: Unable to set response delay.\n", __FUNCTION__));
548 sd_err(("sdioh_cfg_read() failed.\n"));
579 sd_err(("%s: Unable to set sb-addr-windows\n", __FUNCTION__));
587 sd_err(("%s: Unable to set sb-addr-windows\n", __FUNCTION__));
595 sd_err(("%s: regread failed: Can't read CIS\n", __FUNCTION__));
687 sd_err(("%s: bcmspi_card_buf %s failed\n",
741 sd_err(("%s: Host is %d bit spid, could not create SPI command.\n",
769 sd_err(("%s: Host is %d bit machine, could not read SPI dstatus.\n",
836 sd_err(("%s: Host is %d bit machine, could not read SPI dstatus.\n",
876 sd_err(("FIFO underflow happened due to current F2 read command.\n"));
881 sd_err(("FIFO overflow happened due to current (F1/F2) write command.\n"));
885 sd_err(("Recovering from F1 FIFO overflow.\n"));
898 sd_err(("Interrupt from F3. SW should clear corresponding IntStatus bits\n"));
903 sd_err(("Error in CMD or Host data, detected by CRC/Checksum (optional)\n"));
916 sd_err(("Packet is available/ready in F3 TX FIFO\n"));
917 sd_err(("Packet length = %d\n",
999 sd_err(("spi_start_clock failed\n"));
1005 sd_err(("spi_start_clock failed\n"));
1011 sd_err(("bcmspi_host_device_init_adapt failed\n"));
1016 sd_err(("bcmspi_test_card failed\n"));
1037 sd_err(("%s: Unable to set response delay for all fun's.\n", __FUNCTION__));
1045 sd_err(("spi_start_clock failed\n"));
1178 sd_err(("Spid power was left on but signature read failed."
1238 sd_err(("Stale spid reg values read as it was kept powered. Value read ="
1275 sd_err(("Write-Read spid failed. Value wrote = 0x%x, Value read = 0x%x\n",
1288 sd_err(("Write-Read spid failed. Value wrote = 0x%x, Value read = 0x%x\n",
1497 sd_err(("Host is %d bit spid, could not create SPI command.\n",
1602 sd_err(("Host is %d bit machine, could not read SPI dstatus.\n",
1607 sd_err(("looks like not a GSPI device or device is not powered.\n"));
1659 sd_err(("F2 FIFO is not ready to receive data.\n"));
1702 sd_err(("%s: cmd_issue failed for %s\n", __FUNCTION__,
