Lines Matching full:host
38 DESCRIPTION: Contains information element defines/structures used by the FW and host.
194 uint8 wakeUpConditionBitmap; /* The host can set one bit only. */
375 2. Tx-Result entries counter read by the host */
429 /* transmitted to the AP. The host configures this information */
476 uint32 mediumUsage; /* report to the host the value of medium usage registers*/
477 uint32 period; /* report to the host the value of medium period registers*/
506 match the SSID specified by the host in the START/JOIN command.
512 BSSID that does not match the BSSID specified by the host.
572 Desc: This information element enables the host to activate beacon filtering.
574 When activated, either the host is not notified about beacons whose
576 the host is notified only after the buffer reaches a predetermined size.
577 The host should not activate the filter if it configures the firmware
580 and not other MSDUs - the firmware notifies the host immediately about
594 /* signaling the host about ready frames. */
608 transferred (transferred to the host for each appearance or disappearance).
610 for host transfer.
619 wakes up the host in ACX_BEACON_FILTER_OPT does not affect
644 bit 1 - The information element is transferred to the host
898 uint32 MissingBcnsCnt; /* Count the amount of missing beacon interrupts to the host.*/
900 uint32 ConnectionOutOfSync; /* Count the number of times TSF Out Of Sync occures, meaning we lost more consecutive beacons that defined by the host's threshold.*/
1150 /* in case no data TX triggers are sent by host*/
1232 Desc: Noise Histogram activation is done by special command from host which
1354 uint16 rxMblkThreshold; /* Occupied Rx mem-blocks number which requires interrupting the host (0 = no buffering) */
1355 uint16 rxPktThreshold; /* Rx packets number which requires interrupting the host (0 = no buffering) */
1396 uint32 hostClkSettlingTime; /* Host CLK settling time (in uSec units) */
2094 KLV_TEMPLATE_PENDING /* this option is FW internal only. host can only configure VALID or INVALID*/
2214 Note: This structure is passed to the host via the mailbox at Init-Complete
2215 without host request!!
2216 The host reads this structure before sending any configuration to the FW.
2258 uint16 txCompleteThreshold; /* Tx-Complete packets number which requires interrupting the host (0 = no buffering) */
