Lines Matching full:power
50 /** @defgroup Power_Management Power Management group
51 * \brief The Power Management group includes the list of functions which set the power management mode
298 * Tx power level
868 /* 5 */ POWER_SAVE_FAILURE, /**< Power Save Failure Event */
894 /* 5 */ PS_POLL_TEMPLATE, /**< Power Save Poll Template */
942 * \brief 802.11 Power Save Mode
950 /* 0 */ POWER_SAVE_OFF = 0, /**< power save 802.11 OFF */
951 /* 1 */ POWER_SAVE_ON, /**< power save 802.11 ON */
952 /* 2 */ POWER_SAVE_KEEP_CURRENT /**< power save 802.11 don't change */
957 * \brief Set Power Save mode status
965 /* 1 */ POWER_SAVE_802_11_SUCCESS = 1, /**< power save mode Success */
966 /* 2 */ POWER_SAVE_802_11_FAIL, /**< power save mode Fail */
967 /* 3 */ POWER_SAVE_802_11_NOT_ALLOWED, /**< power save mode Not Allowed */
968 /* 4 */ POWER_SAVE_802_11_PENDING, /**< power save mode Pending */
969 /* 5 */ POWER_SAVE_802_11_IS_CURRENT /**< power save mode Is Current */
1081 * \brief Save Power Level Policy
1140 /* 5 */ TEMPLATE_TYPE_PS_POLL /**< Power Save Poll template */
1538 * \brief Power Save RX Streaming
1811 TI_UINT8 RxBroadcastInPs; /**< RX Broadcast In Power Save */
1851 * \brief Power Management Configuration Parameters
1860 /* power management options */
1872 TI_UINT8 HwPsPollResponseTimeout; /**< Power-Save Polling Response Time Out */
1876 TI_BOOL rxBroadcast; /**< Enable/Disable receive of broadcast packets in Power-Save mode */
1877 Power-Save Polling */
1878 /* Power Management Configuration IE */
1879 TI_BOOL ps802_11Enable; /**< Enable/Disable 802.11 Power-Save */
1884 * after sending an MPDU with the Power Save bit set (indicating that the
1885 * station is to go into Power Save mode). Setting bit 0 does not affect
1899 TI_UINT8 ConsecutivePsPollDeliveryFailureThreshold; /**< Power-Save Polling Delivery Failure Threshold */
1904 * \brief Power Save Parameters
1913 TI_BOOL ps802_11Enable; /**< Enable/Disable 802.11 Power-Save */
1918 * after sending an MPDU with the Power Save bit set (indicating that the
1919 * station is to go into Power Save mode). Setting bit 0 does not affect
1985 TI_UINT8 txPowerDbm; /**< TX power level to be used for sending probe requests when active scan is specified.
1986 * If 0, leave normal TX power level for this channel
2051 * \brief AP Power Constraint
2060 int8 powerConstraintOnBss; /**< The attenuation from the regulatory power constraint as declared by the AP
2129 TI_UINT8 psScheme; /**< The power save scheme of the specified queue. Refer to PSScheme_enum */
2625 * \brief Power Service Init Parameters
2728 TPowerSrvInitParams tPowerSrv; /**< Power Service Initialization Parameters */
2879 * \param PSMode - Power Save Mode
2948 * The function prototype for the Power Save Set Response CB
2950 * will be called when Power Save Set Command end
2959 * \param PsMode - Power Save Mode
2964 * The function prototype for the Power Save Set Complete CB
2966 * will be called when Power Save Set Command end (for success/faild notification)
3625 * \brief Get Power Save Status
3723 * \brief Set Power Save Mode
3726 * \param ePsMode - Power Save Mode
3748 * \return TRUE if Power Service State is Pwer Save, FALSE otherwise
4127 * \param pPowerMgmtConfig - Pointer to Input Power Management Configuration Parameters
4131 * Configure Power Manager's Wake Up Condition
4140 * \param pPowerMgmtConfig - Pointer to Input Power Management Configuration Parameters Structure
4144 * pPowerMgmtConfig->BcnBrcOptions.RxBroadcastInPs - if set, enables receive of broadcast packets in Power-Save mode
4149 * Configure Power Manager's Beacon Broadcast Options:
4150 * Beacon RX time Out, Broadcast RX Timeout, RX Broadcast In Power Save,
4151 * Consecutive Power Save Poll Delivery Failure Threshold
4193 * \param eMinPowerPolicy - Minimum Power Policy Type
4197 * Configure the minimum power policy to the FW
4298 * \brief Configure Power Save RX Streaming
4301 * \param pPsRxStreaming - Pointer to Input Power Save RX Straeming Parameters Structure
