Lines Matching full:show
451 of it under certain conditions; type "show copying" to see
453 There is absolutely no warranty for GDB; type "show warranty"
1095 `show logging'
1096 Show the current values of the logging settings.
1107 get GDB to fill out the rest of a word in a command (or to show you the
1170 only one possibility; it can also show you what the valid possibilities
1310 show -- Generic command for showing things
1333 show symbol-reloading -- Show dynamic symbol table reloading
1353 `show' to inquire about the state of your program, or the state of GDB
1356 `info' and under `show' in the Index point to all the sub-commands.
1372 `show'
1373 In contrast to `info', `show' is for describing the state of GDB
1374 itself. You can change most of the things you can `show', by
1377 inquire which is currently in use with `show radix'.
1380 you can use `show' with no arguments; you may also use `info set'.
1383 Here are three miscellaneous `show' subcommands, all of which are
1386 `show version'
1387 Show what version of GDB is running. You should include this
1396 `show copying'
1400 `show warranty'
1479 GDB knows about preprocessor macros and can show you their expansion
1621 `show args'
1622 Show the arguments to give your program when it is started.
1653 `show paths'
1657 `show environment [VARNAME]'
1766 You can use the `show inferior-tty' command to tell GDB to display
1773 `show inferior-tty'
1774 Show the current tty for the program being debugged.
1893 "current thread". Debugging commands show program information from the
2065 `show follow-fork-mode'
2087 `show detach-on-follow'
2088 Show whether detach-on-follow mode is on/off.
2564 `show breakpoint pending'
2565 Show the current behavior setting for creating pending breakpoints.
2657 `show can-use-hw-watchpoints'
2658 Show the current mode of using hardware watchpoints.
3363 `show step-mode'
3364 Show whether GDB will stop in or step over functions without
3672 `show scheduler-locking'
3872 `show backtrace past-main'
3886 `show backtrace past-entry'
3893 `show backtrace limit'
4104 `show listsize'
4364 `show directories'
4365 Print the source path: show which directories it contains.
4404 `show substitute-path [path]'
4487 libraries might show a seemingly bogus location--it's actually a
4500 `show disassembly-flavor'
4501 Show the current setting of the disassembly flavor.
5080 `show print address'
5081 Show whether or not addresses are to be printed.
5099 `show print symbol-filename'
5100 Show whether or not GDB will print the source file name and line
5103 Another situation where it is helpful to show symbol filenames and
5116 `show print max-symbolic-offset'
5132 not show the symbol name and filename of the referent, even with
5145 `show print array'
5146 Show whether compressed or pretty format is selected for displaying
5159 `show print array-indexes'
5160 Show whether the index of each element is printed when displaying
5171 `show print elements'
5184 `show print repeats'
5193 `show print null-stop'
5194 Show whether GDB stops printing an array on the first NULL
5218 `show print pretty'
5219 Show which format GDB is using to print structures.
5232 `show print sevenbit-strings'
5233 Show whether or not GDB is printing only seven-bit characters.
5243 `show print union'
5283 `show print demangle'
5284 Show whether C++ names are printed in mangled or demangled form.
5292 `show print asm-demangle'
5293 Show whether C++ names in assembly listings are printed in mangled
5323 `show demangle-style'
5337 `show print object'
5338 Show whether actual, or declared, object types are displayed.
5348 `show print static-members'
5349 Show whether C++ static members are printed or not.
5359 `show print pascal_static-members'
5360 Show whether Pascal static members are printed or not.
5371 `show print vtbl'
5372 Show whether C++ virtual function tables are pretty printed, or
5422 `show values'
5425 `show values' does not change the history.
5427 `show values N'
5430 `show values +'
5432 no more values are available, `show values +' produces no display.
5434 Pressing <RET> to repeat `show values N' has exactly the same effect
5435 as `show values +'.
5474 `show convenience'
5476 values. Abbreviated `show conv'.
5694 facilities, GDB may be able to show you this information. For remote
5969 `show charset'
5970 Show the names of the current host and target charsets.
5972 `show host-charset'
5973 Show the name of the current host charset.
5975 `show target-charset'
5976 Show the name of the current target charset.
6031 We can use the `show charset' command to see what character sets GDB
6034 (gdb) show charset
6041 (gdb) show charset
6091 (gdb) show charset
6132 `show remotecache'
6133 Show the current state of data caching for remote targets.
6150 evaluate expressions containing macro invocations, show the result of
6151 macro expansion, and show a macro's definition, including where it was
6176 Show the results of expanding all preprocessor macro invocations in
6183 (This command is not yet implemented.) Show the results of
6193 Show the definition of the macro named MACRO, and describe the
6223 show our source files:
7267 * Show:: Displaying the language
7273 File: gdb.info, Node: Setting, Next: Show, Up: Languages
7290 names are demangled--this way `backtrace' can show each frame
7294 Show.
7351 extension. *Note Displaying the language: Show.
7403 File: gdb.info, Node: Show, Next: Checks, Prev: Setting, Up: Languages
7411 `show language'
7439 File: gdb.info, Node: Checks, Next: Supported languages, Prev: Show, Up: Languages
7530 `show type'
7531 Show the current setting of the type checker, and whether or not
7588 `show range'
7589 Show the current setting of the range checker, and whether or not
7976 The `set print union' and `show print union' commands apply to the
8017 `show print demangle'
8019 `show print asm-demangle'
8025 `show print object'
8030 `show print vtbl'
8052 `show overload-resolution'
8053 Show the current setting of overload resolution.
8742 Five subcommands of `set print' and `show print' apply specifically to
9122 `show case-sensitive'
9233 Show information about the current source file--that is, the
9311 `show symbol-reloading'
9312 Show the current `on' or `off' setting.
9329 `show opaque-type-resolution'
9330 Show whether opaque types are resolved or not.
9482 (gdb) show g
9639 `show unwindonsignal'
9640 Show the current setting of stack unwinding in the functions
9675 `show write'
9970 `show trust-readonly-sections'
9971 Show the current setting of trusting readonly sections.
10013 `show auto-solib-add'
10047 `show stop-on-solib-events'
10048 Show whether GDB stops and gives you control when shared library
10073 `show solib-absolute-prefix'
10086 `show solib-search-path'
10140 `show debug-file-directory'
10141 Show the directory GDB searches for separate debugging information
10357 `show architecture'
10358 Show the current target architecture.
10363 `show architecture'.
10445 `show gnutarget'
10446 Use the `show gnutarget' command to display what file format
10449 `show gnutarget' displays `The current BDF target is "auto"'.
10509 `show hash'
10510 Show the current status of displaying the hash mark.
10516 `show debug monitor'
10517 Show the current status of displaying communications between GDB
10564 `show endian'
10840 `show remoteaddresssize'
10841 Show the current value of remote address size in bits.
10848 `show remotebaud'
10849 Show the current speed of the remote connection.
10858 `show remotebreak'
10859 Show whether GDB sends `BREAK' or `Ctrl-C' to interrupt the remote
10870 `show remotedevice'
10871 Show the current name of the serial port.
10878 `show remotelogbase'
10879 Show the current setting of the radix for logging remote serial
10886 `show remotelogfile.'
10887 Show the current setting of the file name on which to record the
10894 `show remotetimeout'
10895 Show the current number of seconds to wait for the remote target
11309 These subcommands are specific to GNU/Linux systems. They show
11318 Show all the information about the process described under all of
11324 `show procfs-trace'
11325 Show the current state of `procfs' API call tracing.
11332 `show procfs-file'
11333 Show the file to which `procfs' API trace is written.
11487 The related commands `show com1base', `show com1irq' etc. display
11535 `show cygwin-exceptions'
11544 `show new-console'
11553 `show new-group'
11579 `show shell'
11709 `show signals'
11710 `show sigs'
11711 Show the current state of intercepting inferior's signals.
11720 `show signal-thread'
11721 `show sigthread'
11722 These two commands show which thread will run when the inferior is
11730 `show stopped'
11739 `show exceptions'
11740 Show the current state of trapping exceptions in the inferior.
11750 `show task pause'
11751 Show the current state of task suspension.
11757 `show task detach-suspend-count'
11758 Show the suspend count the task will be left with when detaching.
11794 `show thread pause'
11800 `show thread run'
11801 Show whether the current thread is allowed to run.
11809 `show thread detach-suspend-count'
11810 Show the suspend count GDB will leave on the thread when detaching.
11824 `show thread default'
11844 `show debug nto-debug'
11845 Show the current state of QNX Neutrino messages.
12060 `show arm disassembler'
12061 Show the current disassembly style.
12066 `show arm apcs32'
12089 `show arm fpu'
12090 Show the current type of the FPU.
12095 `show arm abi'
12096 Show the currently used ABI.
12102 `show debug arm'
12103 Show whether ARM-specific debugging messages are enabled.
12111 no argument, show the current log file name. The default log file
12128 `show rdiromatzero'
12129 Show the current setting of ROM at zero address.
12136 `show rdiheartbeat'
12137 Show the setting of RDI heartbeat packets.
12245 of it under certain conditions; type "show copying" to see
12247 There is absolutely no warranty for GDB; type "show warranty"
12320 `show usehardbreakpoints'
12321 These commands set and show the use of hardware breakpoints for all
12336 architecture with `set machine'. You can use `show machine' to
12347 `show memory'
12349 memory'; check which memory model is in effect with `show memory'.
12371 `show download-path'
12372 Show the default path for downloadable SREC files.
12377 `show board-address'
12378 Show the current IP address of the target board.
12384 `show server-address'
12508 `show mipsfpu'
12525 As usual, you can inquire about the `mipsfpu' variable with `show
12530 `show timeout'
12531 `show retransmit-timeout'
12537 You can inspect both values with `show timeout' and `show
12551 `show syn-garbage-limit'
12552 Show the current limit on the number of characters to ignore when
12567 `show monitor-prompt'
12568 Show the current strings GDB expects as the prompt from the remote
12577 `show monitor-warnings'
12578 Show the current setting of printing monitor warnings.
12713 `show sdstimeout'
12714 Show the current value of the SDS timeout.
12999 `show cris-version'
13000 Show the current CRIS version.
13007 `show cris-dwarf2-cfi'
13008 Show the current state of using DWARF-2 CFI.
13015 `show cris-mode'
13016 Show the current CRIS mode.
13027 Show the values of all Super-H registers.
13041 `show remotedirectory'
13042 Show the current value of the upload directory.
13049 `show remoteupload'
13050 Show the current setting of the upload method.
13056 `show remoteaddhost'
13057 Show whether to add this host to remote stub's arguments when
13091 `show struct-convention'
13092 Show the current setting of the convention to return `struct's
13112 `show rstack_high_address'
13147 `show heuristic-fence-post'
13171 `show mips saved-gpreg-size'
13172 Show the current size of MIPS GP registers on the stack.
13201 `show mips abi'
13202 Show the MIPS ABI used by GDB to debug the inferior.
13205 `show mipsfpu'
13214 `show mips mask-address'
13215 Show whether the upper 32 bits of MIPS addresses are masked off or
13224 `show remote-mips64-transfers-32bit-regs'
13225 Show the current setting of compatibility with older MIPS 64
13232 `show debug mips'
13233 Show the current setting of MIPS debugging messages.
13248 `show debug hppa'
13249 Show whether HPPA debugging messages are displayed.
13296 `show prompt'
13321 `show editing'
13322 Show whether command line editing is enabled.
13398 `show history'
13399 `show history filename'
13400 `show history save'
13401 `show history size'
13402 `show history expansion'
13404 `show history' by itself displays all four states.
13406 `show commands'
13409 `show commands N'
13412 `show commands +'
13437 `show height'
13439 `show width'
13441 screen width of CPL characters. The associated `show' commands
13456 `show pagination'
13457 Show the current pagination mode.
13495 `show input-radix'
13498 `show output-radix'
13502 `show radix'
13503 These commands set and show the default base for both input and
13529 `show osabi'
13530 Show the OS ABI currently in use.
13533 With no argument, show the list of registered available OS ABI's.
13559 `show coerce-float-to-double'
13560 Show the current setting of promoting `float' to `double'.
13572 `show cp-abi'
13573 Show the C++ ABI currently in use.
13576 With no argument, show the list of supported C++ ABI's.
13603 `show verbose'
13617 `show complaints'
13638 `show confirm'
13653 `show trace-commands'
13672 `show exec-done-display'
13680 `show debug arch'
13687 `show debug aix-thread'
13688 Show the current state of AIX thread debugging info display.
13694 `show debug event'
13701 `show debug expression'
13709 `show debug frame'
13718 `show debug infrun'
13725 `show debug lin-lwp'
13726 Show the current state of Linux LWP debugging messages.
13732 `show debug observer'
13740 `show debug overload'
13749 `show debug remote'
13756 `show debug serial'
13762 `show debug solib-frv'
13774 `show debug target'
13781 `show debugvarobj'
13869 `show user'
13870 `show user COMMANDNAME'
13875 `show max-user-call-depth'
14179 which uses the `curses' library to show the source file, the assembly
14220 The source and assembly windows show the current program position by
14462 Show the floating point registers in the register window.
14465 Show the general registers in the register window.
14468 Show the next register group. The list of register groups as well
14474 Show the system registers in the register window.
14578 and splits the screen to show both your GDB session and the source.
14611 update the display window to show the current file and location.
14616 to show the current file and location.
14652 buffer if necessary to show you the context of the current frame.
15754 The `-exec-show-arguments' Command
15760 -exec-show-arguments
15767 The corresponding GDB command is `show args'.
15814 command output, the path will show up separated by the system
15858 used around the name. In the command output, the path will show up
15890 Show the current working directory.
16480 -stack-list-arguments SHOW-VALUES
16486 equal, show the single frame at the corresponding level. It is an
16491 The SHOW-VALUES argument must have a value of 0 or 1. A value of 0
16632 Show frames between LOW_FRAME and HIGH_FRAME:
16645 Show a single frame:
16746 * `-gdb-show' `output-radix'
16782 `-var-show-format' show the display format of this variable
16785 `-var-info-type' show the type of this variable object
16787 `-var-show-attributes' is this variable editable? does it exist
16868 The `-var-show-format' Command
16874 -var-show-format NAME
16948 The `-var-show-attributes' Command
16954 -var-show-attributes NAME
16989 altered by the assign, the variable will show up in any subsequent
17248 Show a list of register names for the current target. If no
17517 Show the file for the symbol.
17537 Show which function the symbol lives in.
17557 Show the core addresses of the code for a source line.
17702 Show type of VARIABLE.
18304 The `-gdb-show' Command
18310 -gdb-show
18312 Show the current value of a GDB variable.
18317 The corresponding GDB command is `show'.
18323 -gdb-show annotate
18335 Show version information for GDB. Used mostly in testing.
18340 The GDB equivalent is `show version'. GDB by default shows this
18353 ~Type "show copying" to see the conditions.
18354 ~There is absolutely no warranty for GDB. Type "show warranty" for
18410 The `-inferior-tty-show' Command
18416 -inferior-tty-show
18418 Show terminal for future runs of program being debugged.
18423 The corresponding GDB command is `show inferior-tty'.
18432 -inferior-tty-show
18492 `show annotate'
18493 Show the current annotation level.
18505 Type "show copying" to see the conditions.
18506 There is absolutely no warranty for GDB. Type "show warranty"
18793 arguments; you can also print it at any time using `show version'.
19366 `show-all-if-ambiguous'
19372 `show-all-if-unmodified'
19374 in a fashion similar to SHOW-ALL-IF-AMBIGUOUS. If set to
20889 `maint show dwarf2 max-cache-age'
20903 `maint show profile'
20918 `maint show-debug-regs'
20919 Control whether to show variables that mirror the x86 hardware
20956 `show watchdog'
20957 Show the current setting of the target wait timeout.
23049 `show remote system-call-allowed'
23050 Show whether the `system' calls are allowed in the File I/O
24249 source code. And you must show them these terms so they know their
24541 type `show
24543 under certain conditions; type `show c' for details.
24545 The hypothetical commands `show w' and `show c' should show the
24547 commands you use may be called something other than `show w' and `show
25126 * -exec-show-arguments: GDB/MI Program Context.
25155 * -gdb-show: GDB/MI Miscellaneous Commands.
25161 * -inferior-tty-show: GDB/MI Miscellaneous Commands.
25242 * -var-show-attributes: GDB/MI Variable Objects.
25244 * -var-show-format: GDB/MI Variable Objects.
25964 * info extensions: Show. (line 34)
25973 * info frame, show the source language: Show. (line 15)
26001 * info source, show the source language: Show. (line 21)
26203 * maint show dwarf2 max-cache-age: Maintenance Commands.
26205 * maint show profile: Maintenance Commands.
26207 * maint show-debug-regs: Maintenance Commands.
26715 * set extension-language: Show. (line 30)
26817 * show: Help. (line 113)
26818 * show all user variables: Convenience Vars. (line 37)
26819 * show annotate: Annotations Overview.
26821 * show architecture: Targets. (line 21)
26822 * show args: Arguments. (line 28)
26823 * show arm: ARM. (line 22)
26824 * show auto-solib-add: Files. (line 317)
26825 * show backtrace: Backtrace. (line 105)
26826 * show board-address: M32R/D. (line 24)
26827 * show breakpoint pending: Set Breaks. (line 211)
26828 * show can-use-hw-watchpoints: Set Watchpoints. (line 71)
26829 * show case-sensitive: Symbols. (line 40)
26830 * show charset: Character Sets. (line 53)
26831 * show check range: Range Checking. (line 34)
26832 * show check type: Type Checking. (line 42)
26833 * show coerce-float-to-double: ABI. (line 50)
26834 * show com1base: DJGPP Native. (line 137)
26835 * show com1irq: DJGPP Native. (line 137)
26836 * show com2base: DJGPP Native. (line 137)
26837 * show com2irq: DJGPP Native. (line 137)
26838 * show com3base: DJGPP Native. (line 137)
26839 * show com3irq: DJGPP Native. (line 137)
26840 * show com4base: DJGPP Native. (line 137)
26841 * show com4irq: DJGPP Native. (line 137)
26842 * show commands: Command History. (line 78)
26843 * show complaints: Messages/Warnings. (line 35)
26844 * show confirm: Messages/Warnings. (line 56)
26845 * show convenience: Convenience Vars. (line 37)
26846 * show copying: Help. (line 137)
26847 * show cp-abi: ABI. (line 53)
26848 * show cygwin-exceptions: Cygwin Native. (line 38)
26849 * show debug: Debugging Output. (line 22)
26850 * show debug mips: MIPS. (line 108)
26851 * show debug monitor: Target Commands. (line 112)
26852 * show debug nto-debug: Neutrino. (line 13)
26853 * show debug-file-directory: Separate Debug Files.
26855 * show detach-on-follow: Processes. (line 71)
26856 * show directories: Source Path. (line 111)
26857 * show disassembly-flavor: Machine Code. (line 77)
26858 * show download-path: M32R/D. (line 18)
26859 * show editing: Editing. (line 22)
26860 * show environment: Environment. (line 33)
26861 * show exceptions, Hurd command: Hurd Native. (line 46)
26862 * show exec-done-display: Debugging Output. (line 14)
26863 * show follow-fork-mode: Processes. (line 49)
26864 * show gnutarget: Target Commands. (line 40)
26865 * show hash, for remote monitors: Target Commands. (line 105)
26866 * show height: Screen Size. (line 21)
26867 * show history: Command History. (line 70)
26868 * show host-charset: Character Sets. (line 56)
26869 * show inferior-tty: Input/Output. (line 52)
26870 * show input-radix: Numbers. (line 36)
26871 * show language: Show. (line 10)
26872 * show last commands: Command History. (line 78)
26873 * show listsize: List. (line 36)
26874 * show logging: Logging output. (line 26)
26875 * show machine: Renesas Special. (line 8)
26876 * show max-user-call-depth: Define. (line 73)
26877 * show mips abi: MIPS. (line 77)
26878 * show mips mask-address: MIPS. (line 90)
26879 * show mips saved-gpreg-size: MIPS. (line 47)
26880 * show mipsfpu: MIPS Embedded. (line 60)
26881 * show monitor-prompt, MIPS remote: MIPS Embedded. (line 119)
26882 * show monitor-warnings, MIPS remote: MIPS Embedded. (line 129)
26883 * show new-console: Cygwin Native. (line 47)
26884 * show new-group: Cygwin Native. (line 56)
26885 * show opaque-type-resolution: Symbols. (line 247)
26886 * show osabi: ABI. (line 11)
26887 * show output-radix: Numbers. (line 39)
26888 * show overload-resolution: Debugging C plus plus.
26890 * show pagination: Screen Size. (line 42)
26891 * show paths: Environment. (line 29)
26892 * show print: Print Settings. (line 39)
26893 * show processor: Targets. (line 31)
26894 * show procfs-file: SVR4 Process Information.
26896 * show procfs-trace: SVR4 Process Information.
26898 * show prompt: Prompt. (line 19)
26899 * show radix: Numbers. (line 44)
26900 * show rdiheartbeat: ARM. (line 98)
26901 * show rdiromatzero: ARM. (line 90)
26902 * show remote: Remote configuration.
26904 * show remote system-call-allowed: system. (line 42)
26905 * show remote-mips64-transfers-32bit-regs: MIPS. (line 100)
26906 * show remoteaddhost: WinCE. (line 28)
26907 * show remotecache: Caching Remote Data. (line 18)
26908 * show remotedirectory: WinCE. (line 13)
26909 * show remoteupload: WinCE. (line 21)
26910 * show retransmit-timeout: MIPS Embedded. (line 83)
26911 * show rstack_high_address: A29K. (line 17)
26912 * show sdstimeout: PowerPC. (line 25)
26913 * show server-address: M32R/D. (line 31)
26914 * show shell: Cygwin Native. (line 82)
26915 * show signal-thread: Hurd Native. (line 28)
26916 * show signals, Hurd command: Hurd Native. (line 17)
26917 * show sigs, Hurd command: Hurd Native. (line 17)
26918 * show sigthread: Hurd Native. (line 28)
26919 * show solib-absolute-prefix: Files. (line 377)
26920 * show solib-search-path: Files. (line 390)
26921 * show stop-on-solib-events: Files. (line 352)
26922 * show stopped, Hurd command: Hurd Native. (line 37)
26923 * show struct-convention: i386. (line 15)
26924 * show substitute-path: Source Path. (line 151)
26925 * show symbol-reloading: Symbols. (line 229)
26926 * show syn-garbage-limit, MIPS remote: MIPS Embedded. (line 103)
26927 * show target-charset: Character Sets. (line 59)
26928 * show task, Hurd commands: Hurd Native. (line 57)
26929 * show thread, Hurd command: Hurd Native. (line 101)
26930 * show timeout: MIPS Embedded. (line 83)
26931 * show unwindonsignal: Calling. (line 33)
26932 * show usehardbreakpoints, E7000: Renesas ICE. (line 41)
26933 * show user: Define. (line 67)
26934 * show values: Value History. (line 47)
26935 * show verbose: Messages/Warnings. (line 21)
26936 * show version: Help. (line 127)
26937 * show warranty: Help. (line 141)
26938 * show width: Screen Size. (line 21)
26939 * show write: Patching. (line 26)
26940 * show-all-if-ambiguous: Readline Init File Syntax.
26942 * show-all-if-unmodified: Readline Init File Syntax.
27423 Node: Show299291
