Lines Matching full:configuration
98 * Configuration::
127 To build all languages in a cross-compiler or other configuration
332 File: gccinstall.info, Node: Downloading the source, Next: Configuration, Prev: Prerequisites, Up: Installing GCC
375 File: gccinstall.info, Node: Configuration, Next: Building, Prev: Downloading the source, Up: Installing GCC
377 4 Installing GCC: Configuration
381 built. This document describes the recommended configuration procedure
396 configuration and build phases.
415 configure. Otherwise the configuration scripts may fail.
616 both headers and libraries. This provides a configuration that is
621 use the above simple configuration. It is possible to use the
839 configuration, `gthr-mach.h', is missing and thus this
973 For a native build, the default configuration is to perform a
1199 Enable configuration for an obsoleted system. If you attempt to
1606 File: gccinstall.info, Node: Building, Next: Testing, Prev: Configuration, Up: Installing GCC
1657 For a native build, the default configuration is to perform a 3-stage
1890 compare your results with results from a similar configuration that have
2156 building GCC on the same configuration. The new entry in the
2263 This section contains general configuration information for all
2342 Argonaut ARC processor. This configuration is intended for embedded
2465 FreeBSD 2 or any mutant a.out versions of FreeBSD 3: All configuration
2477 configuration used in the stock FreeBSD configuration of GCC. In
2493 FreeBSD will require additional configuration tuning in, at the very
2618 compiler detected during configuration. You must define `PATH' or `CC'
2638 commands. The default linker is determined during configuration. As a
2707 configuration is supported by GCC 4.0 and later versions only.
2751 `/etc/security/limits' system configuration file.
2753 To speed up the configuration phases of bootstrapping and installing
2872 Renesas M32C processor. This configuration is intended for embedded
2878 Renesas M32R processor. This configuration is intended for embedded
2917 GCC 4.3 changed the uClinux configuration so that it uses the
3419 The Xtensa configuration information must be specified prior to
3421 configuration information. If you created your own Xtensa
3422 configuration with the Xtensa Processor Generator, the downloaded files
3599 1. If you have chosen a configuration for GCC which requires other GNU
3620 machines. So you don't need to specify a configuration when
3622 what your configuration is or guesses wrong.
3624 In those cases, specify the build machine's "configuration name"
3632 A configuration name may be canonical or it may be more or less
3635 A canonical configuration name has three parts, separated by
3641 You can also replace parts of the configuration by nicknames or
3650 See *Note Configurations::, for a list of supported configuration
3730 name. If you want to install your own homemade configuration files,
3732 configuration `CPU-local', the configuration name without the cpu prefix
3733 is used to form the configuration file names.
3735 Thus, if you specify `m68k-local', configuration uses files
4181 * Configuration: Configuration. (line 6)
4192 * Installing GCC: Configuration: Configuration. (line 6)
4209 Node: Configuration14979
