Lines Matching full:mips
290 Per Bothner, Noboyuki Hikichi, and Alessandro Forin contributed MIPS
335 Toshiba sponsored the support for the TX39 Mips processor.
3326 `next' command. This avoids problems when using `cc -gl' on MIPS
3931 On the MIPS and Alpha architecture, it needs two addresses: a stack
10548 Some types of processors, such as the MIPS, PowerPC, and Renesas SH,
12025 * MIPS Embedded:: MIPS Embedded
12421 File: gdb.info, Node: M68K, Next: MIPS Embedded, Prev: M32R/D, Up: Embedded Processors
12450 File: gdb.info, Node: MIPS Embedded, Next: OpenRISC 1000, Prev: M68K, Up: Embedded Processors
12452 18.3.6 MIPS Embedded
12455 GDB can use the MIPS remote debugging protocol to talk to a MIPS board
12457 with `--target=mips-idt-ecoff'.
12462 `target mips PORT'
12465 command `target mips PORT', where PORT is the name of the serial
12476 (gdb) target mips /dev/ttyb
12480 `target mips HOSTNAME:PORTNUMBER'
12496 Densan DVE-R3900 ROM monitor for Toshiba R3900 Mips.
12502 GDB also supports these special commands for MIPS targets:
12509 If your target board does not support the MIPS floating point
12533 the MIPS remote protocol, with the `set timeout SECONDS' command.
12539 GDB is configured for `--target=mips-idt-ecoff'.)
12585 File: gdb.info, Node: OpenRISC 1000, Next: PA, Prev: MIPS Embedded, Up: Embedded Processors
13074 * MIPS::
13118 File: gdb.info, Node: Alpha, Next: MIPS, Prev: A29K, Up: Architectures
13126 File: gdb.info, Node: MIPS, Next: HPPA, Prev: Alpha, Up: Architectures
13128 18.4.4 MIPS
13131 Alpha- and MIPS-based computers use an unusual stack frame, which
13151 debugging programs on Alpha or MIPS processors.
13153 Several MIPS-specific commands are available when debugging MIPS
13156 `set mips saved-gpreg-size SIZE'
13157 Set the size of MIPS general-purpose registers saved on the stack.
13171 `show mips saved-gpreg-size'
13172 Show the current size of MIPS GP registers on the stack.
13174 `set mips stack-arg-size SIZE'
13179 `set mips abi ARG'
13180 Tell GDB which MIPS ABI is used by the inferior. Possible values
13201 `show mips abi'
13202 Show the MIPS ABI used by GDB to debug the inferior.
13206 *Note set mipsfpu: MIPS Embedded.
13208 `set mips mask-address ARG'
13210 64-bit MIPS addresses are masked off. The argument ARG can be
13214 `show mips mask-address'
13215 Show whether the upper 32 bits of MIPS addresses are masked off or
13219 This command controls compatibility with 64-bit MIPS targets that
13220 transfer data in 32-bit quantities. If you have an old MIPS 64
13225 Show the current setting of compatibility with older MIPS 64
13228 `set debug mips'
13230 MIPS-specific target code in GDB.
13232 `show debug mips'
13233 Show the current setting of MIPS debugging messages.
13236 File: gdb.info, Node: HPPA, Prev: MIPS, Up: Architectures
21463 bytes) that should be inserted (e.g., the ARM and MIPS can insert
24074 everything just works. The observation here is that the MIPS and
25305 * Alpha stack: MIPS. (line 6)
25794 * floating point, MIPS remote: MIPS Embedded. (line 60)
25901 * heuristic-fence-post (Alpha, MIPS): MIPS. (line 14)
26262 * MIPS addresses, masking: MIPS. (line 84)
26263 * MIPS boards: MIPS Embedded. (line 6)
26264 * MIPS GP register size on stack: MIPS. (line 32)
26265 * MIPS remote floating point: MIPS Embedded. (line 60)
26266 * MIPS stack: MIPS. (line 6)
26267 * MIPS stack space for arguments: MIPS. (line 50)
26398 * pmon, MIPS remote: MIPS Embedded. (line 132)
26554 * remote monitor prompt: MIPS Embedded. (line 107)
26589 * response time, MIPS debugging: MIPS. (line 10)
26599 * retransmit-timeout, MIPS protocol: MIPS Embedded. (line 83)
26651 * send PMON command: MIPS Embedded. (line 132)
26665 * set ABI for MIPS: MIPS. (line 55)
26697 * set debug mips: MIPS. (line 104)
26734 * set mips abi: MIPS. (line 55)
26735 * set mips mask-address: MIPS. (line 84)
26736 * set mips saved-gpreg-size: MIPS
26737 * set mips stack-arg-size: MIPS. (line 50)
26738 * set mipsfpu: MIPS Embedded. (line 60)
26739 * set monitor-prompt, MIPS remote: MIPS Embedded. (line 107)
26740 * set monitor-warnings, MIPS remote: MIPS Embedded. (line 123)
26762 * set remote-mips64-transfers-32bit-regs: MIPS. (line 94)
26767 * set retransmit-timeout: MIPS Embedded. (line 83)
26785 * set syn-garbage-limit, MIPS remote: MIPS Embedded. (line 98)
26789 * set timeout: MIPS Embedded. (line 83)
26850 * show debug mips: MIPS. (line 108)
26877 * show mips abi: MIPS. (line 77)
26878 * show mips mask-address: MIPS. (line 90)
26879 * show mips saved-gpreg-size: MIPS. (line 47)
26880 * show mipsfpu: MIPS Embedded. (line 60)
26881 * show monitor-prompt, MIPS remote: MIPS Embedded. (line 119)
26882 * show monitor-warnings, MIPS remote: MIPS Embedded. (line 129)
26905 * show remote-mips64-transfers-32bit-regs: MIPS. (line 100)
26910 * show retransmit-timeout: MIPS Embedded. (line 83)
26926 * show syn-garbage-limit, MIPS remote: MIPS Embedded. (line 103)
26930 * show timeout: MIPS Embedded. (line 83)
26988 * stack on Alpha: MIPS. (line 6)
26989 * stack on MIPS: MIPS. (line 6)
27052 * synchronize with remote MIPS target: MIPS Embedded. (line 98)
27064 * target array: MIPS Embedded. (line 49)
27069 * target ddb PORT: MIPS Embedded. (line 41)
27080 * target lsi PORT: MIPS Embedded. (line 44)
27083 * target mips PORT: MIPS Embedded. (line 14)
27087 * target pmon PORT: MIPS Embedded. (line 38)
27090 * target r3900: MIPS Embedded. (line 46)
27145 * timeout, MIPS protocol: MIPS Embedded. (line 83)
27514 Node: MIPS Embedded497898
27535 Node: MIPS519391
