Lines Matching full:manager
141 SITE_MGR_MODULE_PARAM = 0x0600, /**< Site Manager Module Number */
151 XCC_MANAGER_MODULE_PARAM = 0x1000, /**< XCC Manager Module Number */
152 ROAMING_MANAGER_MODULE_PARAM = 0x1100, /**< Roaming Manager Module Number */
154 QOS_MANAGER_PARAM = 0x1300, /**< Quality Of Service (QoS) Manager Module Number */
155 POWER_MANAGER_PARAM = 0x1400, /**< Power Manager Module Number */
157 SCAN_MNGR_PARAM = 0x1600, /**< Scan Manager Module Number */
255 /* Site manager section */
256 SITE_MGR_DESIRED_CHANNEL_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x01, /**< Site Manager Desired Channel Parameter (Site Manager Module Set/Get Command):\n
260 * Module Number: Site Manager Module Number \n
266 SITE_MGR_DESIRED_SUPPORTED_RATE_SET_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x05, /**< Site Manager Desired Supported Rate Set Parameter (Site Manager Module Set/Get Command):\n
270 * Module Number: Site Manager Module Number \n
276 SITE_MGR_DESIRED_PREAMBLE_TYPE_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x0A, /**< Site Manager Desired Preamble Type Parameter (Site Manager Module Set/Get Command): \n
280 * Module Number: Site Manager Module Number \n
287 SITE_MGRT_SET_RATE_MANAGMENT = SET_BIT | SITE_MGR_MODULE_PARAM | 0x06 , /**< Site Manager Desired Preamble Type Parameter (Site Manager Module Set/Get Command): \n
291 * Module Number: Site Manager Module Number \n
299 SITE_MGRT_GET_RATE_MANAGMENT = GET_BIT | SITE_MGR_MODULE_PARAM | 0x07| ASYNC_PARAM, /**< Site Manager Desired Preamble Type Parameter (Site Manager Module Set/Get Command): \n
303 * Module Number: Site Manager Module Number \n
312 SITE_MGR_CURRENT_CHANNEL_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x0E, /**< Site Manager Current Channel Parameter (Site Manager Module Set/Get Command): \n
316 * Module Number: Site Manager Module Number \n
322 SITE_MGR_TI_WLAN_COUNTERS_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x14, /**< Site Manager TI WLAN Counters Parameter (Site Manager Module Get Command): \n
326 * Module Number: Site Manager Module Number \n
332 SITE_MGR_EEPROM_VERSION_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x16, /**< Site Manager EEPROM Version Parameter (Site Manager Module Get Command): \n
336 * Module Number: Site Manager Module Number \n
342 SITE_MGR_FIRMWARE_VERSION_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x17, /**< Site Manager FW Version Parameter (Site Manager Module Get Command): \n
346 * Module Number: Site Manager Module Number \n
352 SITE_MGR_DESIRED_SLOT_TIME_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x1B, /**< Site Manager Desired Slot Time Parameter (Site Manager Module Set/Get Command): \n
356 * Module Number: Site Manager Module Number \n
362 SITE_MGR_GET_AP_QOS_CAPABILITIES = GET_BIT | SITE_MGR_MODULE_PARAM | 0x2E, /**< Site Manager Get AP QoS Cpabilities Parameter (Site Manager Module Get Command): \n
366 * Module Number: Site Manager Module Number \n
372 SITE_MGR_CURRENT_TX_RATE_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x32, /**< Site Manager Current TX Rate Parameter (Site Manager Module Get Command): \n
376 * Module Number: Site Manager Module Number \n
382 SITE_MGR_BSSID_FULL_LIST_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x34, /**< Site Manager BSSID Full List Parameter (Site Manager Module Get Command): \n
386 * Module Number: Site Manager Module Number \n
392 SITE_MGR_BEACON_FILTER_DESIRED_STATE_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x35, /**< Site Manager Beacon Filter Desired State Parameter (Site Manager Module Set/Get Command): \n
396 * Module Number: Site Manager Module Number \n
402 SITE_MGR_NETWORK_TYPE_IN_USE = GET_BIT | SITE_MGR_MODULE_PARAM | 0x36, /**< Site Manager NW Type in Use Parameter (Site Manager Module Get Command): \n
406 * Module Number: Site Manager Module Number \n
414 SITE_MGR_SIMPLE_CONFIG_MODE = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x38, /**< Site Manager Simple Configuration Mode Parameter (Simple Configuration Module Set/Get Command): \n
418 * Module Number: Site Manager Module Number \n
424 SITE_MGR_GET_PRIMARY_SITE = GET_BIT | SITE_MGR_MODULE_PARAM | 0x40, /**< Site Manager Get Primary Site Parameter (Simple Configuration Module Get Command): \n
428 * Module Number: Site Manager Module Number \n
435 SITE_MGR_PRIMARY_SITE_HT_SUPPORT = GET_BIT | SITE_MGR_MODULE_PARAM | 0x41, /**< Site Manager check if the Primary Site support HT: \n
439 * Module Number: Site Manager Module Number \n
445 SITE_MGR_CURRENT_RX_RATE_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x42, /**< Site Manager Current RX Rate Parameter (Site Manager Module Get Command): \n
449 * Module Number: Site Manager Module Number \n
651 /* Scan Manager module */
652 SCAN_MNGR_SET_CONFIGURATION = SET_BIT | SCAN_MNGR_PARAM | 0x01 | ALLOC_NEEDED_PARAM, /**< Scan Manager Set Configuration Parameter (Scan Manager Module Set Command): \n
656 * Module Number: Scan Manager Module Number \n
662 SCAN_MNGR_BSS_LIST_GET = GET_BIT | SCAN_MNGR_PARAM | 0x02 | ALLOC_NEEDED_PARAM, /**< Scan Manager Get BSS List Parameter (Scan Manager Module Get Command): \n
666 * Module Number: Scan Manager Module Number \n
755 * Used for config manager in order to set/get a parameter received from the OS abstraction layer\n
775 /* Power Manager params */
776 POWER_MGR_POWER_MODE = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x01, /**< Power Manager Power Mode Parameter (Power Manager Module Set/Get Command): \n
777 * Used for setting/getting the Power Mode to/from Power Manager Module\n
780 * Module Number: Power Manager Module Number \n
786 POWER_MGR_POWER_LEVEL_PS = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x02, /**< Power Manager Power Level Power-Save Parameter (Power Manager Module Set/Get Command): \n
787 * Used for getting the Power Level Power-Save from Power Manager Module or setting the Power Level Power-Save to Power Manager Module (and to FW if Power-Save is Enabled)\n
790 * Module Number: Power Manager Module Number \n
796 POWER_MGR_POWER_LEVEL_DEFAULT = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x03, /**< Power Manager Power Level Default Parameter (Power Manager Module Set/Get Command): \n
797 * Used for getting the Power Level Default from Power Manager Module or setting the Power Level Default to Power Manager Module (and to FW if Power-Save is Enabled)\n
800 * Module Number: Power Manager Module Number \n
806 POWER_MGR_POWER_LEVEL_DOZE_MODE = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x04, /**< Power Manager Power Level Doze Mode (short-doze / long-doze) Parameter (Power Manager Module Set/Get Command): \n
807 * Used for getting the Power Level Doze Mode from Power Manager Module or setting the Power Level Doze Mode to Power Manager Module (and to FW if Power-Save is Enabled)\n
810 * Module Number: Power Manager Module Number \n
816 POWER_MGR_KEEP_ALIVE_ENA_DIS = SET_BIT | POWER_MANAGER_PARAM | 0x05, /**< Power Manager Keep Alive Enable/Disable Parameter (Power Manager Module Set Command): \n
817 * Used for setting the Keep Alive Enable/Disable to Power Manager and FW\n
820 * Module Number: Power Manager Module Number \n
826 POWER_MGR_KEEP_ALIVE_ADD_REM = SET_BIT | POWER_MANAGER_PARAM | 0x06 | ALLOC_NEEDED_PARAM, /**< Power Manager Keep Alive add REM Parameter (Power Manager Module Set Command): \n
827 * Used for setting addition/removal of a template and global enable/disable flag to Power Manager and FW\n
830 * Module Number: Power Manager Module Number \n
836 POWER_MGR_KEEP_ALIVE_GET_CONFIG = GET_BIT | POWER_MANAGER_PARAM | 0x07 | ALLOC_NEEDED_PARAM, /**< Power Manager Keep Alive Get Configuration Parameter (Power Manager Module Get Command): \n
840 * Module Number: Power Manager Module Number \n
848 POWER_MGR_GET_POWER_CONSUMPTION_STATISTICS = GET_BIT | POWER_MANAGER_PARAM | 0x09| ASYNC_PARAM, /**< Power Manager Get power consumption parmeter (Power Manager Module Get Command): \n
852 * Module Number: Power Manager Module Number \n
1011 /* Roaming manager */
1012 ROAMING_MNGR_APPLICATION_CONFIGURATION = SET_BIT | GET_BIT | ROAMING_MANAGER_MODULE_PARAM | 0x01, /**< Roaming Manager Application Configuration Parameter (Roaming Manager Module Set/Get Command): \n
1013 * Used for setting/getting Roaming Manager Application Configuration to/from Roaming Manager Module and State-Machine\n
1016 * Module Number: Roaming Manager Module Number \n
1022 ROAMING_MNGR_USER_DEFINED_TRIGGER = SET_BIT | ROAMING_MANAGER_MODULE_PARAM | 0x02, /**< Roaming Manager User Defined Trigger Parameter (Roaming Manager Module Set Command): \n
1026 * Module Number: Roaming Manager Module Number \n
1033 /* QOS manager params */
1034 QOS_MNGR_SET_OS_PARAMS = SET_BIT | QOS_MANAGER_PARAM | 0x10, /**< QoS Manager Set OS Parameter (QoS Module Set Command): \n
1035 * Used for setting Quality Of Service Manager's Parameters\n
1044 QOS_MNGR_AP_QOS_PARAMETERS = GET_BIT | QOS_MANAGER_PARAM | 0x11, /**< QoS Manager AP QoS Parameter (QoS Module Get Command): \n
1054 QOS_MNGR_OS_TSPEC_PARAMS = GET_BIT | QOS_MANAGER_PARAM | 0x12, /**< QoS Manager OS TSPEC Parameter (QoS Module Get Command): \n
1064 QOS_MNGR_AC_STATUS = SET_BIT | GET_BIT | QOS_MANAGER_PARAM | 0x13, /**< QoS Manager AC Status Parameter (QoS Module Set/Get Command): \n
1074 QOS_MNGR_ADD_TSPEC_REQUEST = SET_BIT | QOS_MANAGER_PARAM | 0x14, /**< QoS Manager Add TSPEC Request Parameter (QoS Module Set Command): \n
1084 QOS_MNGR_DEL_TSPEC_REQUEST = SET_BIT | QOS_MANAGER_PARAM | 0x15, /**< QoS Manager Delete TSPEC Request Parameter (QoS Module Set Command): \n
1094 QOS_MNGR_GET_DESIRED_PS_MODE = GET_BIT | QOS_MANAGER_PARAM | 0x17, /**< QoS Manager Get Desired Power-Save Mode Parameter (QoS Module Get Command): \n
1104 QOS_SET_RX_TIME_OUT = SET_BIT | QOS_MANAGER_PARAM | 0x18, /**< QoS Manager Get Desired Power-Save Mode Parameter (QoS Module Set Command): \n
1114 QOS_MNGR_PS_RX_STREAMING = SET_BIT | GET_BIT | QOS_MANAGER_PARAM | 0x19, /**< QoS Manager Set Power-Save RX Streaming Parameter (QoS Module Set/Get Command): \n
1329 XCC_CONFIGURATION = SET_BIT | GET_BIT | XCC_MANAGER_MODULE_PARAM | 0x01, /**< XCC Manager Configuration Parameter (XCC Manager Module Set/Get Command): \n
1333 * Module Number: XCC Manager Module Number \n
1377 CURR_BSS_REGISTER_LINK_QUALITY_EVENT_PARAM = SET_BIT | CURR_BSS_MODULE_PARAM | 0x01, /**< CurrBss User Defined Trigger Parameter (Roaming Manager Module Set Command): \n
