| /hardware/ti/wlan/wl1271/stad/src/Data_link/ |
| Ctrl.c | 52 #include "rate.h"
186 ctrlData_updateTxRateAttributes(hCtrlData); /* Update TxCtrl module with rate change.*/
372 /* 2. Incase there are no mutual rates: ignor Policy Rate Settings (use only AP Rates) */
388 * DESCRIPTION: This function sets rate fallback policies to be configured to FW
410 /* 1. If a special rate set is defined for this AC, use its related policy */
427 TRACE2(pCtrlData->hReport, REPORT_SEVERITY_INFORMATION, "ctrlData_setTxRatePolicies: AC %d, rate-policy 0x%x", ac, uEnabledHwRatesMask);
436 /* Add a specific policy for management packets, which uses only the lowest supported rate */
451 TRACE1(pCtrlData->hReport, REPORT_SEVERITY_INFORMATION, "ctrlData_setTxRatePolicies: num of Rate policies: %d\n", fwPolicyID);
490 ctrlData_updateTxRateAttributes(hCtrlData); /* Update the TxCtrl module with rate changes. */
519 ctrlData_updateTxRateAttributes(hCtrlData); /* Update the TxCtrl module with rate changes. *
660 ERate rate; local
[all...] |
| /system/wlan/ti/wilink_6_1/stad/src/Data_link/ |
| Ctrl.c | 52 #include "rate.h"
186 ctrlData_updateTxRateAttributes(hCtrlData); /* Update TxCtrl module with rate change.*/
372 /* 2. Incase there are no mutual rates: ignor Policy Rate Settings (use only AP Rates) */
388 * DESCRIPTION: This function sets rate fallback policies to be configured to FW
410 /* 1. If a special rate set is defined for this AC, use its related policy */
427 TRACE2(pCtrlData->hReport, REPORT_SEVERITY_INFORMATION, "ctrlData_setTxRatePolicies: AC %d, rate-policy 0x%x", ac, uEnabledHwRatesMask);
436 /* Add a specific policy for management packets, which uses only the lowest supported rate */
451 TRACE1(pCtrlData->hReport, REPORT_SEVERITY_INFORMATION, "ctrlData_setTxRatePolicies: num of Rate policies: %d\n", fwPolicyID);
490 ctrlData_updateTxRateAttributes(hCtrlData); /* Update the TxCtrl module with rate changes. */
519 ctrlData_updateTxRateAttributes(hCtrlData); /* Update the TxCtrl module with rate changes. *
660 ERate rate; local
[all...] |
| /external/opencore/android/author/ |
| authordriver.cpp | 433 // AMR_NB only supports 8kHz sampling rate
436 // Sampling rate not set, use the default
441 LOGE("Only valid sampling rate for AMR_NB is 8kHz.");
462 // AMR_WB only supports 16kHz sampling rate
465 // Sampling rate not set, use the default
470 LOGE("Only valid sampling rate for AMR_WB is 16kHz.");
490 // Check the sampling rate
493 // No sampling rate set, use the default
535 // Set the sampling rate and number of channels
538 LOGE("Failed to set the sampling rate %d", mSamplingRate)
[all...] |
| /external/iproute2/examples/ |
| README.cbq | 6 # So, between 00:00 and 19:00 RATE will be 64Kbit.
44 # | |___________________ ID (0000-FFFF), let ID looks like shaper's rate
54 # RATE=128Kbit
71 # RATE: Shaper's speed - Kbit,Mbit or bps (bytes per second)
73 # WEIGHT: "weight" of shaper (CBQ class). Like for DEVICE - approx. RATE/10
107 # RATE=28Kbit
115 # RATE=128Kbit
|
| cbq.init-v0.7.3 | 108 # - PEAK parameter for setting TBF's burst peak rate
127 # differentiate RATE throughout the whole day. Time overlapping is
136 # So, between 00:00 and 19:00 the RATE will be 64Kbit.
224 # RATE=<speed> mandatory
225 # RATE=5Mbit
228 # shaped to conform to specified rate. You can use Kbit, Mbit or bps,
235 # Tuning parameter that should be proportional to RATE. As a rule
236 # of thumb, use WEIGHT ~= RATE / 10.
301 # Maximal peak rate for short-term burst traffic. This allows you
302 # to control the absolute peak rate the class can send at, becaus
[all...] |
| /external/opencore/nodes/common/include/ |
| pvmp4h263encextension.h | 51 * Enumerated list of supported rate control types
109 * Sets the frame rate of encoded output for the specified layer.
111 * @param aFrameRate Frame rate for the specified layer in frames per second.
125 * Sets the rate control type to be used by encoder for the specified layer.
127 * @param aRateControl Type of rate control to be used by encoder.
152 * Sets the I-Frame refresh rate of the encoded output.
154 * @param aIFrameInterval I-Frame rate in seconds per I-Frame
|
| /external/opencore/extern_libs_v2/khronos/openmax/include/ |
| OMX_Audio.h | 186 OMX_U32 nSamplingRate; /**< Sampling rate of the source data. Use 0 for
187 variable or unknown sampling rate. */
226 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable
227 rate or unknown bit rates */
228 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for
229 variable or unknown sampling rate. */
257 OMX_AUDIO_AACObjectSSR, /**< AAC Scalable Sample Rate object */
296 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for
297 variable or unknown sampling rate. */
298 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variabl
[all...] |
| /hardware/ti/omap3/omx/system/src/openmax_il/omx_core/inc/ |
| OMX_Audio.h | 169 OMX_U32 nSamplingRate; /**< Sampling rate of the source data. Use 0 for
170 variable or unknown sampling rate. */
209 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable
210 rate or unknown bit rates */
211 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for
212 variable or unknown sampling rate. */
240 OMX_AUDIO_AACObjectSSR, /**< AAC Scalable Sample Rate object */
279 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for
280 variable or unknown sampling rate. */
281 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable
[all...] |
| /system/wlan/ti/sta_dk_4_0_4_32/common/src/TNETW_Driver/Data_Srv/Tx_HW_Queue/ |
| txHwQueueCalc.c | 247 initialRate = ConvertRateTnetToDriver(pPktCtrlBlk->txDescriptor.rate);
253 ("GetTxOpFragThreshold(): Unexpected Tx-Rate = %d\n", initialRate));
266 if (initialRate >= DRV_RATE_6M) /* If it's an OFDM rate. */
307 /* Calculate the fragmentation threshold in data bytes from the required duration and rate. */
310 /* If rate is 5.5M, a value of 55 is used so compensate for the 10 times factor. */
318 ("GetTxOpFragThreshold(): FragThresh=%d, Rate=%d, TXOP=%d, Overhead=%d, NoACK=%d, CTS=%d, RTS=%d\n",
331 * DESCRIPTION: Convert the given rate from TNET format (Tx-descriptor) to driver format.
333 * INPUTS: txDescRate - Rate value in Tx-descriptor format
337 * RETURNS: The converted rate in driver format.
|
| /external/iproute2/tc/ |
| q_red.c | 43 unsigned rate = 0; local
96 if (get_rate(&rate, *argv)) {
118 if (rate == 0)
119 get_rate(&rate, "10Mbit");
138 if ((wlog = tc_red_eval_idle_damping(opt.Wlog, avpkt, rate, sbuf)) < 0) {
|
| tc_stab.c | 35 " mtu : max packet size we create rate map for {2047}\n"
37 " mpu : minimum packet size used in rate computations\n"
38 " overhead : per-packet size overhead used in rate computations\n"
|
| tc_util.h | 64 extern int get_rate(unsigned *rate, const char *str);
71 extern void print_rate(char *buf, int len, __u32 rate);
77 extern char * sprint_rate(__u32 rate, char *buf);
|
| /external/speex/include/speex/ |
| speex_echo.h | 49 /** Set sampling rate */
51 /** Get sampling rate */
143 * @param rate Sampling rate
147 SpeexDecorrState *speex_decorrelate_new(int rate, int channels, int frame_size);
|
| /hardware/ti/omap3/omx/system/src/openmax_il/perf/inc/ |
| perf_rt.h | 48 /* rate parameters */
52 /* data needed for frame rate calculations */
60 if frame rate is less than 0.5fps and tn0 is less than 10 in the last phase,
119 /* rate data */
122 struct PERF_RTdata_rate *dRate; /* rate data */
|
| /hardware/ti/omap3/omx/system/src/openmax_il/perf/tests/ |
| PERF.awk | 2 # measures the rate of the filtered traces. This can be used to measure
162 print "Rate is", result;
170 print "(Adjusted rate without pauses is", result, ")";
172 print "(Not enough data to calculate adjusted rate without pauses)";
176 print "Error: Not enough data to calculate rate";
|
| /external/bluetooth/bluez/audio/ |
| gstavdtpsink.c | 95 "clock-rate = (int) { 16000, 32000, "
102 "clock-rate = (int) 90000; "
107 "clock-rate = (int) 90000, "
274 gint rate, subbands, blocks; local
286 value = gst_structure_get_value(structure, "rate");
287 rate = g_value_get_int(value);
288 if (rate == 44100)
290 else if (rate == 48000)
292 else if (rate == 32000)
294 else if (rate == 16000
960 gint rate, layer; local
[all...] |
| /external/srec/srec/EventLog/src/ |
| riff.c | 557 short **samples, int *rate, int *length, SwiRiffStruct *swichunk)
593 *rate = wf->nSamplesPerSec;
643 ifrom = (int)(from * (*rate) / 1000.0);
649 ito = (int)(to * (*rate) / 1000.0 + 0.5);
775 *audio_type = L"audio/L16;rate=8000";
777 *audio_type = L"audio/L16;rate=16000";
783 *audio_type = L"audio/x-alaw-basic;rate=8000";
793 *audio_type = L"audio/basic;rate=8000";
795 *audio_type = L"audio/basic;rate=8000;orig-encoding=g723";
797 *audio_type = L"audio/basic;rate=8000;orig-encoding=g729"
[all...] |
| /external/opencore/codecs_v2/audio/gsm_amr/amr_nb/enc/include/ |
| gsmamr_encoder_wrapper.h | 22 ANSI-C code for the Adaptive Multi-Rate (AMR) speech codec
47 // Mode of operation (the same as bit rate)
104 // DESCRIPTION: Sampling rate of the input samples in Hz.
107 // If sampling rate is not known until CAEI is initialized,
111 // DESCRIPTION: Clock rate or time scale to be used for the input timestamps
114 // If sampling rate is not known until CAEI is initialized,
131 // DESCRIPTION: Desired Sampling rate for a given bitrate combination:
143 // DESCRIPTION: Mode of operation (the same as bit rate). For example,
166 // USAGE: If the input sampling rate is not appropriate (e.g.,
169 // rate. The CAEI will perform resampling if th
[all...] |
| /external/opencore/codecs_v2/video/m4v_h263/enc/src/ |
| mp4lib_int.h | 176 //float FrameRate; /* Input Frame Rate */
183 float LayerFrameRate[4]; /* Encoded Frame Rate */
186 float LayerMaxFrameRate[4]; /* Maximum Encoded Frame Rate */
203 /* Rate Control Parameters */
211 Bool FineFrameSkip_Enabled; /* src rate resolution frame skipping */
212 Bool VBR_Enabled; /* VBR rate control */
252 /* 04/09/01, for multipass rate control */
264 /* multipass rate control data */
278 /* 3 : macroblock level rate control */
347 /* Annex L Rate Control *
[all...] |
| /external/tremolo/Tremolo/ |
| ivorbiscodec.h | 54 long rate; member in struct:vorbis_info
60 implies a fixed rate bitstream
66 may also be set to give a nominal rate.
|
| /frameworks/base/media/java/android/media/ |
| ResampleInputStream.java | 56 * Create a new ResampleInputStream, which converts the sample rate
58 * @param rateIn the input sample rate.
59 * @param rateOut the output sample rate.
|
| /ndk/build/platforms/android-3/arch-arm/usr/include/linux/ |
| pkt_sched.h | 59 __u32 rate; member in struct:tc_ratespec
78 struct tc_ratespec rate; member in struct:tc_tbf_qopt
184 struct tc_ratespec rate; member in struct:tc_htb_opt
|
| /ndk/build/platforms/android-4/arch-arm/usr/include/linux/ |
| pkt_sched.h | 59 __u32 rate; member in struct:tc_ratespec
78 struct tc_ratespec rate; member in struct:tc_tbf_qopt
184 struct tc_ratespec rate; member in struct:tc_htb_opt
|
| /ndk/build/platforms/android-5/arch-arm/usr/include/linux/ |
| pkt_sched.h | 59 __u32 rate; member in struct:tc_ratespec
78 struct tc_ratespec rate; member in struct:tc_tbf_qopt
184 struct tc_ratespec rate; member in struct:tc_htb_opt
|
| /ndk/build/platforms/android-5/arch-x86/usr/include/linux/ |
| pkt_sched.h | 59 __u32 rate; member in struct:tc_ratespec
78 struct tc_ratespec rate; member in struct:tc_tbf_qopt
184 struct tc_ratespec rate; member in struct:tc_htb_opt
|
