| /ndk/build/platforms/android-8/arch-x86/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /packages/apps/VoiceDialer/src/com/android/voicedialer/ |
| RecognizerEngine.java | 111 * @param sampleRate the same rate coming from the mic or micFile
126 // sample rate has changed since we last used this recognizerEngine.
|
| /system/wlan/ti/sta_dk_4_0_4_32/common/src/BusAccess/Shm_Common/ |
| whalTrace.c | 204 pData->Rate = (UINT16)local_TxDesc.rate;
|
| /system/wlan/ti/sta_dk_4_0_4_32/common/src/core/Core_Adapt/ |
| Core_AdaptTx.c | 199 * Transmit rate class ID defined in txRatePolicy
251 txCompleteAttr.rate = aRate;
|
| /system/wlan/ti/wilink_6_1/TWD/FirmwareApi/ |
| public_types.h | 283 #define SHORT_PREAMBLE_BIT BIT_0 /* CCK or Barker depending on the rate */
309 Transmit-Descriptor RATE-SET field definitions...
|
| public_commands.h | 291 12 2 Probe request rate & modulation
395 EHwRateBitFiled txdRateSet; /* This EHwRateBitFiled format field specifies the rate and */
627 /* response frame rate for the BSS or IBSS (that*/
630 /* field to determine the rate at which to */
[all...] |
| /system/wlan/ti/wilink_6_1/TWD/MacServices/ |
| MacServices.c | 357 void MacServices_powerSrv_SetRateModulation(TI_HANDLE hMacServices, TI_UINT16 rate)
361 powerSrv_SetRateModulation( pMacServices->hPowerSrv, rate);
|
| /system/wlan/ti/wilink_6_1/stad/src/Sta_Management/ |
| StaCap.c | 228 tHtCapabilities.tSuppMcsSet.uTxRxSetting = ((TX_MCS_SET_YES << 0) | /* set supported TX MCS rate */
229 (TX_RX_NOT_EQUAL_NO << 1)); /* set TX&RX MCS rate are equal */
|
| /external/kernel-headers/original/linux/ |
| pci_regs.h | 247 #define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */
248 #define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */
249 #define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */
256 #define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
257 #define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */
258 #define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */
|
| /external/opencore/codecs_v2/audio/gsm_amr/amr_nb/common/src/ |
| pred_lt.cpp | 22 ANSI-C code for the Adaptive Multi-Rate (AMR) speech codec
142 flag3 = flag to indicate the upsampling rate; if set, upsampling
143 rate is 3, otherwise, upsampling rate is 6 (Word16)
189 Word16 flag3 // input : if set, upsampling rate = 3 (6 otherwise)
259 Word16 flag3, /* input : if set, upsampling rate = 3 (6 otherwise) */
|
| /external/opencore/protocols/systems/3g-324m_pvterminal/h324/tsc/include/ |
| tsc_h324m_config_interface.h | 350 * A value of 0 indicates a high spatial resolution and a value of 31 indicates a high frame rate.
351 * The values from 0 to 31 indicate monotonically a higher frame rate. Actual values do not correspond
352 * to precise values of spatial resolution or frame rate.
363 * A value of 0 indicates a high spatial resolution and a value of 31 indicates a high frame rate.
364 * The values from 0 to 31 indicate monotonically a higher frame rate. Actual values do not correspond
365 * to precise values of spatial resolution or frame rate.
|
| /external/srec/srec/include/ |
| frontapi.h | 202 * Returns Current sample rate (Hz)
207 * Gets the sample rate from the front end object
551 * samplerate File's sample rate (Hz)
595 * samplerate Device sample rate (Hz)
671 * Returns Sample rate used by the wave device
754 * data is in the correct format. The sample rate should match that of the
[all...] |
| /external/wpa_supplicant/ |
| driver.h | 48 * @maxrate: maximum supported rate
206 int rate; /* rate in 100 kbps */ member in struct:wpa_rate_data
731 * @supp_rates: Supported rate set (from (Re)AssocResp); in IEEE 802.11
732 * format (one octet per rate, 1 = 0.5 Mbps)
740 * processing (TX rate control, encryption/decryption).
|
| /frameworks/base/media/libstagefright/codecs/amrnb/common/src/ |
| pred_lt.cpp | 22 ANSI-C code for the Adaptive Multi-Rate (AMR) speech codec
142 flag3 = flag to indicate the upsampling rate; if set, upsampling
143 rate is 3, otherwise, upsampling rate is 6 (Word16)
189 Word16 flag3 // input : if set, upsampling rate = 3 (6 otherwise)
259 Word16 flag3, /* input : if set, upsampling rate = 3 (6 otherwise) */
|
| /system/wlan/ti/sta_dk_4_0_4_32/CUDK/Inc/ |
| TI_AdapterQOS.h | 227 uMeanDataRate - Indicates the average data rate in units of bits
229 uMinimumPHYRate - Indicates the desired minimum PHY rate in units
362 Desc: This function set the Phy Rate low and high thresholds for a
368 uHighThreshold - Indicates high Phy Rate threshold in Mbs
370 uLowThreshold - Indicates low Phy Rate threshold in Mbs
383 Desc: This function retrieves the Phy Rate thresholds for a specific AC.
|
| /hardware/ti/wlan/wl1271/CUDK/configurationutility/src/ |
| ticon.c | 137 ConParm_t aaa[] = { {(PS8)"tx rate", CON_PARM_STRING | CON_PARM_OPTIONAL, 0, 32, 0 }, CON_LAST_PARM };
138 Console_AddToken(pTiCon->hConsole,h, (PS8)"Rate", (PS8)"Get TX data rate in Mbps (1,2,5.5,11...)", (FuncToken_t) CuCmd_GetTxRate, aaa );
387 {(PS8)"Probe Request Rate", CON_PARM_RANGE, 0, DRV_RATE_MASK_54_OFDM, 0 },
515 {(PS8)"Probe req. rate", CON_PARM_RANGE, 0, DRV_RATE_MASK_54_OFDM, 0 },
533 {(PS8)"Probe req. rate", CON_PARM_RANGE, 0, DRV_RATE_MASK_54_OFDM, 0 },
551 {(PS8)"Probe req. rate", CON_PARM_RANGE, 0, DRV_RATE_MASK_54_OFDM, 0 },
596 {(PS8)"tx Rate threshold", CON_PARM_RANGE, 0, 54, 2 }, CON_LAST_PARM };
597 Console_AddToken(pTiCon->hConsole,h1, (PS8)"tx Rate threshold ", (PS8)"TX rate (fallback) threshold", (FuncToken_t) CuCmd_RoamingTxRateThreshold, aaa )
[all...] |
| /system/wlan/ti/wilink_6_1/CUDK/configurationutility/src/ |
| ticon.c | 137 ConParm_t aaa[] = { {(PS8)"tx rate", CON_PARM_STRING | CON_PARM_OPTIONAL, 0, 32, 0 }, CON_LAST_PARM };
138 Console_AddToken(pTiCon->hConsole,h, (PS8)"Rate", (PS8)"Get TX data rate in Mbps (1,2,5.5,11...)", (FuncToken_t) CuCmd_GetTxRate, aaa );
387 {(PS8)"Probe Request Rate", CON_PARM_RANGE, 0, DRV_RATE_MASK_54_OFDM, 0 },
504 {(PS8)"Probe req. rate", CON_PARM_RANGE, 0, DRV_RATE_MASK_54_OFDM, 0 },
522 {(PS8)"Probe req. rate", CON_PARM_RANGE, 0, DRV_RATE_MASK_54_OFDM, 0 },
540 {(PS8)"Probe req. rate", CON_PARM_RANGE, 0, DRV_RATE_MASK_54_OFDM, 0 },
585 {(PS8)"tx Rate threshold", CON_PARM_RANGE, 0, 54, 2 }, CON_LAST_PARM };
586 Console_AddToken(pTiCon->hConsole,h1, (PS8)"tx Rate threshold ", (PS8)"TX rate (fallback) threshold", (FuncToken_t) CuCmd_RoamingTxRateThreshold, aaa )
[all...] |
| /external/webkit/WebCore/platform/graphics/mac/ |
| MediaPlayerPrivateQTKit.mm | 588 [m_qtMovie.get() setRate:m_player->rate()];
653 float oldRate = [m_qtMovie.get() rate];
699 return [m_qtMovie.get() rate] == 0;
776 void MediaPlayerPrivate::setRate(float rate)
779 [m_qtMovie.get() setRate:rate];
912 // If this movie is reloading and we mean to restore the current time/rate, this might be the right time to do it.
920 [m_qtMovie.get() setRate:m_player->rate()];
[all...] |
| /external/speex/libspeex/ |
| nb_celp.c | 494 spx_int32_t rate; local
495 speex_encoder_ctl(state, SPEEX_GET_BITRATE, &rate);
496 if (rate > st->vbr_max)
498 rate = st->vbr_max;
499 speex_encoder_ctl(state, SPEEX_SET_BITRATE, &rate);
583 /*If we use low bit-rate pitch mode, transmit open-loop pitch*/
766 /* Low bit-rate pitch handling */
1618 spx_int32_t rate, target; local
1672 spx_int32_t rate, target; local
[all...] |
| /external/bluetooth/hcidump/parser/ |
| lmp.c | 606 uint8_t rate = LMP_U8(frm); local
609 printf("data rate 0x%2.2x\n", rate);
614 printf("%suse FEC, ", rate & 0x01 ? "do not " : "");
616 switch ((rate >> 1) & 0x03) {
634 switch ((rate >> 3) & 0x03) {
649 switch ((rate >> 5) & 0x03) {
|
| /frameworks/base/media/libmedia/ |
| AudioTrack.cpp | 448 status_t AudioTrack::setSampleRate(int rate)
455 // Resampler implementation limits input sampling rate to 2 x output sampling rate.
456 if (rate <= 0 || rate > afSamplingRate*2 ) return BAD_VALUE;
458 mCblk->sampleRate = rate;
954 snprintf(buffer, 255, " sample rate(%d), status(%d), muted(%d)\n", (mCblk == 0) ? 0 : mCblk->sampleRate, mStatus, mMuted);
|
| /external/quake/quake/src/QW/server/ |
| sv_user.c | 1007 int rate; local
1011 SV_ClientPrintf (host_client, PRINT_HIGH, "Current rate is %i\n",
1012 (int)(1.0/host_client->netchan.rate + 0.5));
1016 rate = atoi(Cmd_Argv(1));
1017 if (rate < 500)
1018 rate = 500;
1019 if (rate > 10000)
1020 rate = 10000;
1022 SV_ClientPrintf (host_client, PRINT_HIGH, "Net rate set to %i\n", rate);
[all...] |
| /external/opencore/engines/player/src/ |
| pv_player_engine.h | 612 // Player engine's timebase with rate change capability
639 // Calculate the tickcount since last rate change
645 // Adjust according to rate
646 // Rate change resolution is 0.1
656 // Add the timebase since last rate change
663 // Save the tickcount time when the rate changed
671 // Change the rate
682 uint32 iRateChangeTCTime; // The tickcount's time when rate last changed
[all...] |
| /hardware/ti/wlan/wl1271/TWD/FirmwareApi/ |
| public_commands.h | 291 12 2 Probe request rate & modulation
395 EHwRateBitFiled txdRateSet; /* This EHwRateBitFiled format field specifies the rate and */
627 /* response frame rate for the BSS or IBSS (that*/
630 /* field to determine the rate at which to */
[all...] |
| /external/netperf/ |
| nettest_unix.c | 360 /* themselves. If the user has specified the cpu rate, then */
363 /* all the "normal" calibration stuff and return the rate back.*/
644 thruput, /* what was the xfer rate */
901 /* rate back to the initiator. If the CPU was not to be measured, or */
[all...] |
