| /external/grub/netboot/ |
| ns8390.c | 30 #include "cards.h"
545 Search for WD/SMC cards
630 Search for 3Com 3c503 if no WD/SMC cards
645 * Note that we use the same settings for both 8 and 16 bit cards:
647 * cards have a bank at page 0.
753 Search for NE1000/2000 if no WD/SMC or 3com cards
|
| 3c509.c | 29 #include "cards.h"
352 * Basically; after the ID_sequence is sent to all of the cards; they enter
355 * cards check for contention (ie: if one card writes a 0 bit and another
|
| epic100.c | 7 #include "cards.h"
116 /* Ideally we would detect all network cards in slot order. That would
119 Epic cards in slot order. */
|
| otulip.c | 11 Even on cards with the same chipset there can be
28 #include "cards.h"
|
| lance.c | 22 #include "cards.h"
230 /* HomePNA cards need to explicitly pick the phoneline interface.
231 * Some of these cards have ethernet interfaces as well, this
236 /* this is specific to HomePNA cards... */
|
| tulip.c | 12 As of April 2001 this driver should support most tulip cards that
18 MX98715, MX98715A and MX98725. Support inexpensive PCI 10/100 cards
53 code. This driver should support a lot more cards now.
56 which is used on the LinkSYS LNE100TX v4.x cards. We already
57 support LNE100TX v2.0 cards, which use a different controller.
64 Increased reset delay to 3 seconds because Macronix cards seem to
68 some cards seem to need the time or they drop the first packet
81 interface on cards using the Intel/DEC 21143 reference design, in
90 Added preliminary support for LNE100TX PCI cards. Should work for
91 PNIC2 cards. No MII support, but single interface (RJ45) tuli
[all...] |
| smc9000.c | 3 * This is a Etherboot driver for SMC's 9000 series of Ethernet cards.
32 #include "cards.h"
|
| natsemi.c | 59 #include "cards.h"
311 * PCI cards probably have PME disabled, but motherboard
416 * PCI cards probably have PME disabled, but motherboard
|
| Makefile.am | 13 libdrivers_a_SOURCES = cards.h config.c etherboot.h \
|
| /external/quake/quake/src/WinQuake/ |
| glqnotes.txt | 73 This will generally run well on a normal 4 MB 3dfx card, but for other cards
99 60% to 100% increase in frame rate. Currently, only 3DFX dual TMU cards
|
| snd_dos.cpp | 417 // version 4 cards (sb 16) do 16 bit stereo
423 // version 3 cards (sb pro) do 8 bit stereo
429 // v2 cards do 8 bit mono
|
| /external/quake/quake/src/WinQuake/kit/ |
| README.TXT | 73 This will generally run well on a normal 4 MB 3dfx card, but for other cards
99 60% to 100% increase in frame rate. Currently, only 3DFX dual TMU cards
|
| /external/qemu/android/avd/ |
| hardware-properties.ini | 125 description = Whether the device supports insertion/removal of virtual SD Cards.
|
| /external/webkit/WebCore/wml/ |
| WMLGoElement.cpp | 112 // FIXME: 'newcontext' handling not implemented for external cards
|
| /packages/inputmethods/LatinIME/java/src/com/android/inputmethod/latin/ |
| BinaryDictionary.java | 99 // If there aren't sufficient suggestions, search for words by allowing wild cards at
|
| /external/openssl/ssl/ |
| ssl_rsa.c | 203 * for smart cards. */
421 * for smart cards. */
|
| /dalvik/libcore/xml/src/main/java/org/apache/xml/dtm/ |
| DTMFilter.java | 182 * the DTM interface. Wild cards will be defined
|
| /external/libpcap/ |
| pcap-bpf.h | 314 * For 802.11 cards using the Prism II chips, with a link-layer
321 * Reserved for Aironet 802.11 cards, with an Aironet link-layer header
577 * for internal communication to Physical Interface Cards (PIC)
711 * Various link-layer types, with a pseudo-header, for Endace DAG cards;
|
| pcap-dag.c | 480 strlcpy(p->errbuf, "Sending packets isn't supported on DAG cards",
488 * cards are always promiscuous. The to_ms parameter is also ignored as it is
612 /* This is a really bad idea, as different cards have different
807 * with DAG cards.
|
| /external/quake/quake/src/QW/docs/ |
| glqwcl-readme.txt | 67 This will generally run well on a normal 4 MB 3dfx card, but for other cards
|
| /external/wpa_supplicant/ |
| README | 156 madwifi driver for cards based on Atheros chip set (ar521x)
162 ATMEL AT76C5XXx driver for USB and PCMCIA cards
169 This is a generic Linux driver for Broadcom IEEE 802.11a/g cards.
200 operating systems. Hopefully, support for more wlan cards and OSes will be
[all...] |
| /external/wpa_supplicant_6/wpa_supplicant/ |
| README | 157 madwifi driver for cards based on Atheros chip set (ar521x)
163 ATMEL AT76C5XXx driver for USB and PCMCIA cards
170 This is a generic Linux driver for Broadcom IEEE 802.11a/g cards.
204 operating systems. Hopefully, support for more wlan cards and OSes will be
[all...] |
| /external/openssl/crypto/engine/ |
| eng_cryptodev.c | 366 * want digests on slow cards like hifn on fast machines,
368 * will also want them when using crypto cards that don't
373 * by default) on cards that generally suck like the hifn.
|
| /external/quake/quake/src/WinQuake/data/ |
| README.TXT | 26 On some ATI Mach32 cards, Quake can come up with a garbled video display.
132 Other UltraSound Cards (ACE & Classic)
135 sound cards. We have heard mixed reports that MegaEm or SBOS
|
| /external/openssl/crypto/evp/ |
| openbsd_hw.c | 325 /* some cards can't do zero length */
|
