Lines Matching full:wpa
94 # parameters (e.g., WPA IE generation); this mode can also be used with
95 # non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
190 # and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has
191 # to be set to 2 for IBSS. WPA-None requires following network block options:
192 # proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
203 # WPA = WPA/IEEE 802.11i/D3.0
205 # If not set, this defaults to: WPA RSN
208 # WPA-PSK = WPA pre-shared key (this requires 'psk' field)
209 # WPA-EAP = WPA using EAP authentication (this can use an external
213 # NONE = WPA is not used; plaintext or static WEP could be used
214 # If not set, this defaults to: WPA-PSK WPA-EAP
217 # OPEN = Open System authentication (required for WPA/WPA2)
223 # pairwise: list of accepted pairwise (unicast) ciphers for WPA
230 # group: list of accepted group (broadcast/multicast) ciphers for WPA
237 # psk: WPA preshared key; 256-bit pre-shared key
238 # The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
242 # This field is not needed, if WPA-EAP is used.
249 # Dynamic WEP key required for non-WPA mode
280 # cannot be used with WPA; to be used as a Phase 2 method
282 # MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
284 # OTP = EAP-OTP (cannot be used separately with WPA; to be used
286 # GTC = EAP-GTC (cannot be used separately with WPA; to be used
439 # Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
455 # Only WPA-PSK is used. Any valid cipher combination is accepted.
458 # proto=WPA
459 # key_mgmt=WPA-PSK
466 # Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
471 # key_mgmt=WPA-EAP
487 # key_mgmt=WPA-EAP
501 # key_mgmt=WPA-EAP
514 # key_mgmt=WPA-EAP
523 # WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
527 # key_mgmt=WPA-EAP
541 # Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
546 # proto=WPA RSN
547 # key_mgmt=WPA-PSK WPA-EAP
553 # Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
564 # key_mgmt=WPA-EAP
574 # key_mgmt=WPA-EAP
582 # IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
607 # EAP-FAST with WPA (WPA or WPA2)
610 # key_mgmt=WPA-EAP
621 # key_mgmt=WPA-EAP
630 # Plaintext connection (no WPA, no IEEE 802.1X)
637 # Shared WEP key connection (no WPA, no IEEE 802.1X)
649 # Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
663 # IBSS/ad-hoc network with WPA-None/TKIP.
668 # proto=WPA
669 # key_mgmt=WPA-NONE
680 # key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
697 # key_mgmt=WPA-EAP
730 # key_mgmt=WPA-EAP
