1 /* 2 * Copyright (C) 2008 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 /* 18 * Table of Dalvik opcode names. 19 */ 20 #include "OpCodeNames.h" 21 22 #include <assert.h> 23 24 /* 25 * The following two lines work, but slashes and dashes both turn into 26 * underscores, and the strings are all upper case. The output is easier 27 * to read if we do the strings by hand (could probably write a 28 * post-processing function easily enough if maintenance becomes annoying). 29 */ 30 //#define H(_op) #_op 31 //DEFINE_GOTO_TABLE(gOpNames) 32 33 /* 34 * Dalvik opcode names. 35 */ 36 static const char* gOpNames[256] = { 37 /* 0x00 */ 38 "nop", 39 "move", 40 "move/from16", 41 "move/16", 42 "move-wide", 43 "move-wide/from16", 44 "move-wide/16", 45 "move-object", 46 "move-object/from16", 47 "move-object/16", 48 "move-result", 49 "move-result-wide", 50 "move-result-object", 51 "move-exception", 52 "return-void", 53 "return", 54 55 /* 0x10 */ 56 "return-wide", 57 "return-object", 58 "const/4", 59 "const/16", 60 "const", 61 "const/high16", 62 "const-wide/16", 63 "const-wide/32", 64 "const-wide", 65 "const-wide/high16", 66 "const-string", 67 "const-string/jumbo", 68 "const-class", 69 "monitor-enter", 70 "monitor-exit", 71 "check-cast", 72 73 /* 0x20 */ 74 "instance-of", 75 "array-length", 76 "new-instance", 77 "new-array", 78 "filled-new-array", 79 "filled-new-array/range", 80 "fill-array-data", 81 "throw", 82 "goto", 83 "goto/16", 84 "goto/32", 85 "packed-switch", 86 "sparse-switch", 87 "cmpl-float", 88 "cmpg-float", 89 "cmpl-double", 90 91 /* 0x30 */ 92 "cmpg-double", 93 "cmp-long", 94 "if-eq", 95 "if-ne", 96 "if-lt", 97 "if-ge", 98 "if-gt", 99 "if-le", 100 "if-eqz", 101 "if-nez", 102 "if-ltz", 103 "if-gez", 104 "if-gtz", 105 "if-lez", 106 "UNUSED", 107 "UNUSED", 108 109 /* 0x40 */ 110 "UNUSED", 111 "UNUSED", 112 "UNUSED", 113 "UNUSED", 114 "aget", 115 "aget-wide", 116 "aget-object", 117 "aget-boolean", 118 "aget-byte", 119 "aget-char", 120 "aget-short", 121 "aput", 122 "aput-wide", 123 "aput-object", 124 "aput-boolean", 125 "aput-byte", 126 127 /* 0x50 */ 128 "aput-char", 129 "aput-short", 130 "iget", 131 "iget-wide", 132 "iget-object", 133 "iget-boolean", 134 "iget-byte", 135 "iget-char", 136 "iget-short", 137 "iput", 138 "iput-wide", 139 "iput-object", 140 "iput-boolean", 141 "iput-byte", 142 "iput-char", 143 "iput-short", 144 145 /* 0x60 */ 146 "sget", 147 "sget-wide", 148 "sget-object", 149 "sget-boolean", 150 "sget-byte", 151 "sget-char", 152 "sget-short", 153 "sput", 154 "sput-wide", 155 "sput-object", 156 "sput-boolean", 157 "sput-byte", 158 "sput-char", 159 "sput-short", 160 "invoke-virtual", 161 "invoke-super", 162 163 /* 0x70 */ 164 "invoke-direct", 165 "invoke-static", 166 "invoke-interface", 167 "UNUSED", 168 "invoke-virtual/range", 169 "invoke-super/range", 170 "invoke-direct/range", 171 "invoke-static/range", 172 "invoke-interface/range", 173 "UNUSED", 174 "UNUSED", 175 "neg-int", 176 "not-int", 177 "neg-long", 178 "not-long", 179 "neg-float", 180 181 /* 0x80 */ 182 "neg-double", 183 "int-to-long", 184 "int-to-float", 185 "int-to-double", 186 "long-to-int", 187 "long-to-float", 188 "long-to-double", 189 "float-to-int", 190 "float-to-long", 191 "float-to-double", 192 "double-to-int", 193 "double-to-long", 194 "double-to-float", 195 "int-to-byte", 196 "int-to-char", 197 "int-to-short", 198 199 /* 0x90 */ 200 "add-int", 201 "sub-int", 202 "mul-int", 203 "div-int", 204 "rem-int", 205 "and-int", 206 "or-int", 207 "xor-int", 208 "shl-int", 209 "shr-int", 210 "ushr-int", 211 "add-long", 212 "sub-long", 213 "mul-long", 214 "div-long", 215 "rem-long", 216 217 /* 0xa0 */ 218 "and-long", 219 "or-long", 220 "xor-long", 221 "shl-long", 222 "shr-long", 223 "ushr-long", 224 "add-float", 225 "sub-float", 226 "mul-float", 227 "div-float", 228 "rem-float", 229 "add-double", 230 "sub-double", 231 "mul-double", 232 "div-double", 233 "rem-double", 234 235 /* 0xb0 */ 236 "add-int/2addr", 237 "sub-int/2addr", 238 "mul-int/2addr", 239 "div-int/2addr", 240 "rem-int/2addr", 241 "and-int/2addr", 242 "or-int/2addr", 243 "xor-int/2addr", 244 "shl-int/2addr", 245 "shr-int/2addr", 246 "ushr-int/2addr", 247 "add-long/2addr", 248 "sub-long/2addr", 249 "mul-long/2addr", 250 "div-long/2addr", 251 "rem-long/2addr", 252 253 /* 0xc0 */ 254 "and-long/2addr", 255 "or-long/2addr", 256 "xor-long/2addr", 257 "shl-long/2addr", 258 "shr-long/2addr", 259 "ushr-long/2addr", 260 "add-float/2addr", 261 "sub-float/2addr", 262 "mul-float/2addr", 263 "div-float/2addr", 264 "rem-float/2addr", 265 "add-double/2addr", 266 "sub-double/2addr", 267 "mul-double/2addr", 268 "div-double/2addr", 269 "rem-double/2addr", 270 271 /* 0xd0 */ 272 "add-int/lit16", 273 "rsub-int", 274 "mul-int/lit16", 275 "div-int/lit16", 276 "rem-int/lit16", 277 "and-int/lit16", 278 "or-int/lit16", 279 "xor-int/lit16", 280 "add-int/lit8", 281 "rsub-int/lit8", 282 "mul-int/lit8", 283 "div-int/lit8", 284 "rem-int/lit8", 285 "and-int/lit8", 286 "or-int/lit8", 287 "xor-int/lit8", 288 289 /* 0xe0 */ 290 "shl-int/lit8", 291 "shr-int/lit8", 292 "ushr-int/lit8", 293 "+iget-volatile", 294 "+iput-volatile", 295 "+sget-volatile", 296 "+sput-volatile", 297 "+iget-object-volatile", 298 "+iget-wide-volatile", 299 "+iput-wide-volatile", 300 "+sget-wide-volatile", 301 "+sput-wide-volatile", 302 "^breakpoint", // does not appear in DEX files 303 "^throw-verification-error", // does not appear in DEX files 304 "+execute-inline", 305 "+execute-inline/range", 306 307 /* 0xf0 */ 308 "+invoke-direct-empty", 309 "UNUSED", 310 "+iget-quick", 311 "+iget-wide-quick", 312 "+iget-object-quick", 313 "+iput-quick", 314 "+iput-wide-quick", 315 "+iput-object-quick", 316 "+invoke-virtual-quick", 317 "+invoke-virtual-quick/range", 318 "+invoke-super-quick", 319 "+invoke-super-quick/range", 320 "+iput-object-volatile", 321 "+sget-object-volatile", 322 "+sput-object-volatile", 323 "UNUSED", 324 }; 325 326 /* 327 * Return the name of an opcode. 328 */ 329 const char* dexGetOpcodeName(OpCode op) 330 { 331 assert(op >= 0 && op < kNumDalvikInstructions); 332 return gOpNames[op]; 333 } 334
