Lines Matching refs:x00
70 {0x00,0x9B,0xD1,0x0D} // Tx consumption higher than 0x0D (average 50mA)
71 ,{0x00,0x9B,0xD2,0x24} // GSP setting for this threshold
72 ,{0x00,0x9B,0xD3,0x0A} // Tx consumption higher than 0x0A (average 40mA)
73 ,{0x00,0x9B,0xD4,0x22} // GSP setting for this threshold
74 ,{0x00,0x9B,0xD5,0x08} // Tx consumption higher than 0x08 (average 30mA)
75 ,{0x00,0x9B,0xD6,0x1E} // GSP setting for this threshold
76 ,{0x00,0x9B,0xDD,0x1C} // GSP setting for this threshold
77 ,{0x00,0x9B,0x84,0x13} // ANACM2 setting
78 ,{0x00,0x99,0x81,0x7F} // ANAVMID setting PCD
79 ,{0x00,0x99,0x31,0x70} // ANAVMID setting PICC
82 ,{0x00,0x98,0x00,0x3F} // SECURE_ELEMENT_CONFIGURATION - No Secure Element
83 ,{0x00,0x9F,0x09,0x00} // SWP_PBTF_RFU
84 ,{0x00,0x9F,0x0A,0x05} // SWP_PBTF_RFLD --> RFLEVEL Detector for PBTF
85 ,{0x00,0x9E,0xD1,0xA1} //
88 ,{0x00,0x99,0x23,0x00} // Default Value is 0x01
91 ,{0x00,0x9E,0x74,0x80} // Default Value is 0x00, bits 0->2: sensitivity (0==maximal, 6==minimal), bits 3->6: RFU, bit 7: (0 -> disabled, 1 -> enabled)
92 ,{0x00,0x9F,0x28,0x10} // Default value for register 0x28 in FW 109.7
95 ,{0x00,0x9F,0x35,0x14} // Time for which PN544 stays in Card Emulation mode after leaving RF field
96 ,{0x00,0x9F,0x36,0x60} // Default value 0x0411 = 50 ms ---> New Value : 0x1460 = 250 ms
99 ,{0x00,0x9C,0x31,0x00} // Guard host time-out in ms (MSB)
100 ,{0x00,0x9C,0x32,0xC8} // Guard host time-out in ms (LSB)
101 ,{0x00,0x9C,0x19,0x40} // Max RX retry (PN544=>host?)
102 ,{0x00,0x9C,0x1A,0x40} // Max TX retry (PN544=>host?)
104 ,{0x00,0x9C,0x0C,0x00} //
105 ,{0x00,0x9C,0x0D,0x00} //
106 ,{0x00,0x9C,0x12,0x00} //
107 ,{0x00,0x9C,0x13,0x00} //
110 ,{0x00,0x98,0xA2,0x0E} // Max value: 14 (default value: 09)
113 ,{0x00, 0x98, 0x93, 0x40}
116 ,{0x00, 0x98, 0x7D, 0x02}
117 ,{0x00, 0x98, 0x7E, 0x00}
120 ,{0x00, 0x9F, 0xC8, 0x01}
121 // Set NFC-F poll RC=0x00
122 ,{0x00, 0x9F, 0x9A, 0x00}
1676 phLibNfc_SetIsoXchgTimeout(0x00);
1688 phLibNfc_SetMifareRawTimeout(0x00);
