Lines Matching full:assembler
2956 directly to assembler or generating C code which is then compiled by
4465 `scan-assembler-times REGEX NUM [{ target/xfail SELECTOR }]'
4467 assembler output.
4469 `scan-assembler REGEX [{ target/xfail SELECTOR }]'
4470 Passes if REGEX matches text in the test's assembler output.
4472 `scan-assembler-not REGEX [{ target/xfail SELECTOR }]'
4473 Passes if REGEX does not match text in the test's assembler
4476 `scan-assembler-dem REGEX [{ target/xfail SELECTOR }]'
4478 assembler output.
4480 `scan-assembler-dem-not REGEX [{ target/xfail SELECTOR }]'
4482 assembler output.
6036 This pass outputs the assembler code for the function. The source
7035 as a section name and assembler name.
8627 * Assembler:: Representing `asm' with operands.
9843 Represents the value of an assembler label for data. SYMBOL is a
9844 string that describes the name of the assembler label. If it
9853 Represents the value of an assembler label for code. It contains
9870 combinations are valid, since the assembler cannot do arbitrary
11072 resulting assembler code--often `reg', `mem' or constant
11116 Represents literal assembler code as described by the string S.
11157 File: gccint.info, Node: Incdec, Next: Assembler, Prev: Side Effects, Up: RTL
11234 File: gccint.info, Node: Assembler, Next: Insns, Prev: Incdec, Up: RTL
11236 10.17 Assembler Instructions as Expressions
11240 user-specified assembler instruction. It is used to represent an `asm'
11255 Here the operands of the `asm_operands' RTX are the assembler template
11263 `asm_operands'; all of these share the same assembler template and
11269 File: gccint.info, Node: Insns, Next: Calls, Prev: Assembler, Up: RTL
11393 function). Ultimately, the label is represented in the assembler
11394 output as an assembler label, usually of the form `LN' where N is
11445 of line number data in the assembler output.
16543 * Output Template:: The output template says how to make assembler code
16546 the assembler code.
16582 assembler code.
16621 the assembler output, all wrapped up in a `define_insn' expression.
16674 insns as assembler code. `%' in this string specifies where to
16959 assembler code for an instruction pattern. Most of the template is a
16962 places where different variants of the assembler require different
16982 assembler syntax for such an instruction requires you to write the
16990 assembler instructions.
16994 into the assembler code. Other nonstandard cases can be defined in the
16998 The template may generate multiple assembler instructions. Write the
17008 distinguish between different assembler languages for the same machine;
17022 multiple assembler instructions, and there is an matching `define_split'
17024 instead of writing an output template that emits the multiple assembler
17029 multiple variants of assembler language syntax. *Note Instruction
17035 16.6 C Statements for Assembler Output
17039 efficient assembler code for all the cases that are recognized by a
17076 It is very common to select different ways of generating assembler code
17085 It is possible to output an assembler instruction and then go on to
17092 often the appearance of the assembler code is determined mostly by
17111 The example above, where the assembler code to generate was _solely_
17583 that the assembler has only a single operand that fills two roles
17619 In order to have valid assembler code, each operand must satisfy its
17779 often the appearance of the assembler code is determined mostly by which
17781 assembler code can use the variable `which_alternative', which is the
20706 need to put this information into the assembler code; they can put
20799 defined to output a no-op in assembler code. `(const_int 0)' will
20839 it uses. Its assembler code normally has no need to use the
22249 one new insn. The TEMPLATE controls ultimate output of assembler code
22259 Defined peephole optimizers are run as assembler code is being output,
22810 assembler will choose the correct instruction to use. However, when
22811 the assembler cannot do so, GCC can when a special attribute, the
23582 instruction will often use a different assembler mnemonic.
23781 * Assembler Format:: Defining how to write insns and pseudo-ops to output.
23959 pass to the assembler. It can also specify how to translate
23961 assembler. See the file `sun3.h' for an example of this.
23967 any programs which cleanup after the normal assembler. Normally,
23974 assembler an argument consisting of a single dash, `-', to
23979 If you do not define this macro, the assembler is assumed to read
23981 assembler cannot read standard input at all, use a `%{pipe:%e}'
24156 of directories used to find the assembler in `configure.in'.
24193 the assembler and loader. The driver passes the value of this
24381 `clk_objective_c'. Note that if we are preprocessing assembler,
25791 registers which will actually be used in the assembler code, after
27895 If defined, a function that outputs the assembler code for entry
27900 a stdio stream to which the assembler code should be output.
27939 If defined, a function that outputs assembler code at the end of a
27941 emitted as RTL, and you have some extra assembler that needs to be
27945 If defined, a function that outputs assembler code at the start of
27947 being emitted as RTL, and you have some extra assembler that needs
27952 If defined, a function that outputs the assembler code for exit
28079 A function that outputs the assembler code for a thunk function,
28122 be able to output the assembler code for the thunk function
28137 assembler code to call the profiling subroutine `mcount'.
28142 C compiler and look at the assembler code that results.
28252 other machines, it calls a routine written in assembler language,
28408 A C statement to output, on the stream FILE, assembler code for a
28510 by placing a special label of your own in the assembler code. Use
28511 one `asm' statement to generate an assembler label, and another to
28513 jump directly to your special assembler code.
28714 `symbol_ref' in order to determine the section. *Note Assembler
29816 section is selected. If your assembler falls into this category, you
29831 containing the assembler operation that should precede
29846 containing the assembler operation to identify the following data
29851 spacing, containing the assembler operation to identify the
29856 containing the assembler operation to identify the following data
29861 spacing, containing the assembler operation to identify the
29870 spacing, containing the assembler operation to identify the
29875 spacing, containing the assembler operation to identify the
29883 spacing, containing the assembler operation to identify the
29891 spacing, containing the assembler operation to identify the
29898 spacing, containing the assembler operation to identify the
29936 section, along with the assembler instructions. Otherwise, the
30017 Define this hook if you need to postprocess the assembler name
30089 File: gccint.info, Node: PIC, Next: Assembler Format, Prev: Sections, Up: Target Macros
30128 File: gccint.info, Node: Assembler Format, Next: Debugging Info, Prev: PIC, Up: Target Macros
30130 17.21 Defining the Output Assembler Language
30134 to write instructions in assembler language--rather than what the
30139 * File Framework:: Structural information for the assembler file.
30154 File: gccint.info, Node: File Framework, Next: Data Output, Up: Assembler Format
30156 17.21.1 The Overall Framework of an Assembler File
30162 Output to `asm_out_file' any text which the assembler expects to
30165 assembler is quite unusual, if you override the default, you
30175 assembler that it need not bother stripping comments or extra
30190 Output to `asm_out_file' any text which the assembler expects to
30203 assembler language. The compiler assumes that the comment will
30210 but tells the GNU assembler that it must check the lines that
30211 follow for all valid assembler constructs.
30216 `"#NO_APP"', which tells the GNU assembler to resume making the
30232 the assembler source. So you can use it to canonicalize the format
30236 A C statement to output something to the assembler file to handle a
30314 mergeable section in the assembler output file. The name of the
30324 File: gccint.info, Node: Data Output, Next: Uninitialized Data, Prev: File Framework, Up: Assembler Format
30373 A C statement to output to the stdio stream STREAM an assembler
30378 If the assembler has a `.ascii' pseudo-op as found in the Berkeley
30379 Unix assembler, do not define the macro `ASM_OUTPUT_ASCII'.
30395 A C statement to output assembler commands to define the start of
30413 assembler code on. X is the RTL expression for the constant to
30416 an assembler directive to force this much alignment.
30432 A C statement to output assembler commands to at the end of the
30444 as a logical line separator by the assembler. STR points to the
30454 in the assembler for grouping arithmetic expressions. If not
30483 File: gccint.info, Node: Uninitialized Data, Next: Label Output, Prev: Data Output, Up: Assembler Format
30493 STREAM the assembler definition of a common-label named NAME whose
30499 assembler syntax for defining the name, and a newline.
30501 This macro controls how the assembler
30522 STREAM the assembler definition of uninitialized global DECL named
30529 output the additional assembler syntax for defining the name, and
30557 STREAM the assembler definition of a local-common-label named NAME
30563 assembler syntax for defining the name, and a newline.
30565 This macro controls how the assembler definitions of uninitialized
30585 File: gccint.info, Node: Label Output, Next: Initialization, Prev: Uninitialized Data, Up: Assembler Format
30594 STREAM the assembler definition of a label named NAME. Use the
30596 itself; before and after that, output the additional assembler
30607 A C string containing the appropriate assembler directive to
30620 STREAM a directive telling the assembler that the size of the
30626 STREAM a directive telling the assembler to calculate the size of
30631 provided. The default assumes that the assembler recognizes a
30634 assembler does not recognize `.' or cannot do calculations with
30639 A C string containing the appropriate assembler directive to
30662 STREAM a directive telling the assembler that the type of the
30771 output the additional assembler syntax for making that name weak,
30782 output to the stdio stream STREAM assembler code which defines
30854 anything. The GNU assembler and most Unix assemblers don't
30859 assembler pseudo-op to declare a library function name external.
30865 assembler directive to annotate used symbol. Darwin target use
30870 STREAM a reference in assembler syntax to a label named NAME.
30944 produce an assembler label for an internal static variable whose
30946 valid assembler code. The argument NUMBER is different each time
30952 periods or percent signs in assembler symbols; putting at least
30959 A C statement to output to the stdio stream STREAM assembler code
30967 A C statement to output to the stdio stream STREAM assembler code
30977 A C statement that evaluates to true if the assembler code which
30985 A C statement to output to the stdio stream STREAM assembler code
30995 Define this macro to override the default assembler names used for
31000 the category is also included in the assembler name (e.g.
31016 On systems where the assembler can handle quoted names, you can
31032 File: gccint.info, Node: Initialization, Next: Macros for Initialization, Prev: Label Output, Up: Assembler Format
31048 must output something in the assembler code to cause those functions to
31147 File: gccint.info, Node: Macros for Initialization, Next: Instruction Output, Prev: Initialization, Up: Assembler Format
31157 assembler operation to identify the following data as
31215 If defined, a function that outputs assembler code to arrange to
31283 File: gccint.info, Node: Instruction Output, Next: Dispatch Tables, Prev: Macros for Initialization, Up: Assembler Format
31285 17.21.7 Output of Assembler Instructions
31288 This describes assembler instruction output.
31291 A C initializer containing the assembler's names for the machine
31293 translates register numbers in the compiler into assembler
31303 Define this macro if you are using an unusual assembler that
31307 assembler instruction opcode to the stdio stream STREAM. The
31329 of assembler code for INSN, to modify the extracted operands so
31336 template into assembler code, so you can change the assembler
31339 This macro is useful when various assembler syntaxes share a single
31343 variations in assembler syntax affecting individual insn patterns
31351 assembler syntax for an instruction operand X. X is an RTL
31379 assembler syntax for an instruction operand that is a memory
31385 `symbol_ref', and then check for it here. *Note Assembler
31411 are useful when a single `md' file must support multiple assembler
31419 printf formats which may useful when generating their assembler
31428 If your target supports multiple dialects of assembler language
31430 that gives the numeric index of the assembler language dialect to
31449 variations in assembler language syntax with that mechanism.
31455 A C expression to output to STREAM some assembler code which will
31460 A C expression to output to STREAM some assembler code which will
31465 File: gccint.info, Node: Dispatch Tables, Next: Exception Region Output, Prev: Instruction Output, Up: Assembler Format
31473 A C statement to output to the stdio stream STREAM an assembler
31494 stream STREAM an assembler pseudo-instruction to generate a
31517 after the assembler code for the table is written. It should write
31550 File: gccint.info, Node: Exception Region Output, Next: Alignment Output, Prev: Dispatch Tables, Up: Assembler Format
31552 17.21.9 Assembler Commands for Exception Regions
31668 File: gccint.info, Node: Alignment Output, Prev: Exception Region Output, Up: Assembler Format
31670 17.21.10 Assembler Commands for Alignment
31733 A C statement to output to the stdio stream STREAM an assembler
31746 A C statement to output to the stdio stream STREAM an assembler
31755 A C statement to output to the stdio stream STREAM an assembler
31762 File: gccint.info, Node: Debugging Info, Next: Floating Point, Prev: Assembler Format, Up: Target Macros
31866 A C string constant, including spacing, naming the assembler
31873 A C string constant, including spacing, naming the assembler
31880 A C string constant, including spacing, naming the assembler
31935 arguments should precede the assembler code for the function.
31937 follows the assembler code.
31970 argument NAME is the name of an assembler symbol (for use with
32085 Define this macro to be a nonzero value if the assembler can
32112 Define these macros to override the assembler syntax for the
32113 special SDB assembler directives. See `sdbout.c' for a list of
32119 between SDB assembler directives. In that case, define this macro
33195 Define this macro if the assembler does not accept the character
33201 Define this macro if the assembler does not accept the character
33845 will be the concatenation of: the prefix of the assembler file
40727 * asm_operands, usage: Assembler. (line 6)
40780 * assembler format: File Framework. (line 6)
40781 * assembler instructions in RTL: Assembler. (line 6)
40890 * C statements for assembler output: Output Statement. (line 6)
41608 * generating assembler output: Output Statement. (line 6)
42663 * output of assembler code: File Framework. (line 6)
44093 Node: Assembler506775
44264 Node: Assembler Format1325295
