Lines Matching refs:x00
26 {0x00,0x9B,0xD1,0x0D} // Tx consumption higher than 0x0D (average 50mA)
27 ,{0x00,0x9B,0xD2,0x24} // GSP setting for this threshold
28 ,{0x00,0x9B,0xD3,0x0A} // Tx consumption higher than 0x0A (average 40mA)
29 ,{0x00,0x9B,0xD4,0x22} // GSP setting for this threshold
30 ,{0x00,0x9B,0xD5,0x08} // Tx consumption higher than 0x08 (average 30mA)
31 ,{0x00,0x9B,0xD6,0x1E} // GSP setting for this threshold
32 ,{0x00,0x9B,0xDD,0x1C} // GSP setting for this threshold
33 ,{0x00,0x9B,0x84,0x13} // ANACM2 setting
34 ,{0x00,0x99,0x81,0x7F} // ANAVMID setting PCD
35 ,{0x00,0x99,0x31,0x70} // ANAVMID setting PICC
38 ,{0x00,0x98,0x00,0x3F} // SECURE_ELEMENT_CONFIGURATION - No Secure Element
39 ,{0x00,0x9F,0x09,0x00} // SWP_PBTF_RFU
40 ,{0x00,0x9F,0x0A,0x05} // SWP_PBTF_RFLD --> RFLEVEL Detector for PBTF
41 ,{0x00,0x9E,0xD1,0xA1} //
44 ,{0x00,0x99,0x23,0x00} // Default Value is 0x01
47 ,{0x00,0x9E,0x74,0xB0} // Default Value is 0x00, bits 0->2: sensitivity (0==max, 6==min),
52 ,{0x00,0x9E,0x7D,0xB0} // bits 0->3: RFU,
57 ,{0x00,0x9F,0x28,0x01} // bits 0->7: # of measurements per low-power poll
60 ,{0x00,0x9C,0x31,0x00} // Guard host time-out in ms (MSB)
61 ,{0x00,0x9C,0x32,0xC8} // Guard host time-out in ms (LSB)
62 ,{0x00,0x9C,0x19,0x40} // Max RX retry (PN544=>host?)
63 ,{0x00,0x9C,0x1A,0x40} // Max TX retry (PN544=>host?)
65 ,{0x00,0x9C,0x0C,0x00} //
66 ,{0x00,0x9C,0x0D,0x00} //
67 ,{0x00,0x9C,0x12,0x00} //
68 ,{0x00,0x9C,0x13,0x00} //
71 ,{0x00,0x98,0xA2,0x0E} // Max value: 14 (default value: 09)
74 ,{0x00, 0x98, 0x93, 0x40}
77 ,{0x00, 0x98, 0x7D, 0x02}
78 ,{0x00, 0x98, 0x7E, 0x00}
81 ,{0x00, 0x9F, 0xC8, 0x01}
82 // Set NFC-F poll RC=0x00
83 ,{0x00, 0x9F, 0x9A, 0x00}
85 ,{0x00,0x9F,0x09,0x00} // 0x00 - Disable EMD support, 0x01 - Enable EMD support
