Lines Matching full:network
40 used with other network protocols besides IP, but such use is becoming
77 Require the peer to authenticate itself before allowing network
170 than \fIn\fR bytes through the PPP network interface. Note that for
366 network interface. This option is currently only available under
460 .B ipx\-network \fIn
461 Set the IPX network number in the IPXCP configure request frame to
463 valid default. If this option is not specified, the network number is
464 obtained from the peer. If the peer does not have the network number,
472 numbers on the ipx\-network must be unique. There is no valid
493 .B ipxcp\-accept\-network
494 Accept the peer's NAK for the network number specified in the
495 ipx\-network option. If a network number was specified, and non-zero, the
501 Use the peer's network number specified in the configure request
604 Terminate the connection when it has been available for network
606 network control protocol comes up).
844 option can be used to prevent specific network daemons (such as
1024 the first network control protocol, usually the IP control protocol,
1079 fear of compromising the security of the server or the network it's
1193 authorized, based on the ppp network interface unit number in use.
1243 other Network Control Protocol) can be started. If the peer is
1280 pppd to look for a network interface on the same subnet as the remote
1284 and the hardware address of the network interface found.
1322 the peer and create a new bundle, that is, another ppp network
1489 at least one network protocol (e.g. IP) was running.
1538 The name of the network interface being used.
1636 \fIinterface\-name tty\-device speed network\-number local\-IPX\-node\-address
