Lines Matching full:state
125 * enum wpa_states - wpa_supplicant state
128 * state (wpa_s->wpa_state). The current state can be retrieved with
129 * wpa_supplicant_get_state() function and the state can be changed by calling
130 * wpa_supplicant_set_state(). In WPA state machine (wpa.c and preauth.c), the
132 * to access the state variable.
136 * WPA_DISCONNECTED - Disconnected state
138 * This state indicates that client is not associated, but is likely to
139 * start looking for an access point. This state is entered when a
154 * WPA_INACTIVE - Inactive state (wpa_supplicant disabled)
156 * This state is entered if there are no enabled networks in the
166 * This state is entered when wpa_supplicant starts scanning for a
174 * This state is entered when wpa_supplicant has found a suitable BSS
176 * authenticate with this BSS. This state is used only with drivers
184 * This state is entered when wpa_supplicant has found a suitable BSS
187 * state is entered when the driver is configured to try to associate
195 * This state is entered when the driver reports that association has
197 * (with or without WPA/WPA2), wpa_supplicant remains in this state
205 * This state is entered when WPA/WPA2 4-Way Handshake is started. In
207 * frame after association. In case of WPA-EAP, this state is entered
215 * This state is entered when 4-Way Key Handshake has been completed
225 * This state is entered when the full authentication process is
227 * successfully completed. With WPA, this state is entered after the
231 * plaintext connections, this state is entered when an association
234 * This state indicates that the supplicant has completed its
