Lines Matching full:300
107 _Target H8/300 options:_
1667 on the ARC; `@' on the ARM; `;' for the H8/300 family; `;' for the HPPA;
1941 On the H8/300, Renesas / SuperH SH, and AMD 29K architectures, the
2013 the proper run-time addresses. For the H8/300, and for the Renesas /
5334 * H8/300-Dependent:: Renesas H8/300 Dependent Features
7981 File: as.info, Node: D30V-Dependent, Next: H8/300-Dependent, Prev: D10V-Dependent, Up: Machine Dependencies
8305 File: as.info, Node: H8/300-Dependent, Next: HPPA-Dependent, Prev: D30V-Dependent, Up: Machine Dependencies
8307 9.10 H8/300 Dependent Features
8312 * H8/300 Options:: Options
8313 * H8/300 Syntax:: Syntax
8314 * H8/300 Floating Point:: Floating Point
8315 * H8/300 Directives:: H8/300 Machine Directives
8316 * H8/300 Opcodes:: Opcodes
8319 File: as.info, Node: H8/300 Options, Next: H8/300 Syntax, Up: H8/300-Dependent
8324 The Renesas H8/300 version of `as' has one machine-dependent option:
8331 File: as.info, Node: H8/300 Syntax, Next: H8/300 Floating Point, Prev: H8/300 Options, Up: H8/300-Dependent
8338 * H8/300-Chars:: Special Characters
8339 * H8/300-Regs:: Register Names
8340 * H8/300-Addressing:: Addressing Modes
8343 File: as.info, Node: H8/300-Chars, Next: H8/300-Regs, Up: H8/300 Syntax
8351 Therefore _you may not use `$' in symbol names_ on the H8/300.
8354 File: as.info, Node: H8/300-Regs, Next: H8/300-Addressing, Prev: H8/300-Chars, Up: H8/300 Syntax
8360 the H8/300 registers as sixteen 8-bit general-purpose registers. N is
8365 H8/300 registers as 16-bit registers (you must use this form for
8368 On the H8/300H, you can also use the eight predefined symbols `erN'
8372 register, except on the H8/300H where it is 24 bits) and `ccr'
8377 File: as.info, Node: H8/300-Addressing, Prev: H8/300-Regs, Up: H8/300 Syntax
8382 as understands the following addressing modes for the H8/300:
8393 N. (24-bit displacements are only meaningful on the H8/300H.)
8406 on the H8/300H.)
8422 File: as.info, Node: H8/300 Floating Point, Next: H8/300 Directives, Prev: H8/300 Syntax, Up: H8/300-Dependent
8427 The H8/300 family has no hardware floating point, but the `.float'
8432 File: as.info, Node: H8/300 Directives, Next: H8/300 Opcodes, Prev: H8/300 Floating Point, Up: H8/300-Dependent
8434 9.10.4 H8/300 Machine Directives
8437 `as' has the following machine-dependent directives for the H8/300:
8440 Recognize and emit additional instructions for the H8/300H
8442 usual (16-bit) for the H8/300 family.
8447 for the H8/300 family.
8450 Recognize and emit additional instructions for the H8/300H variant
8452 than the usual (16-bit) for the H8/300 family.
8457 the usual (16-bit) for the H8/300 family.
8459 On the H8/300 family (including the H8/300H) `.word' directives
8463 File: as.info, Node: H8/300 Opcodes, Prev: H8/300 Directives, Up: H8/300-Dependent
8468 For detailed information on the H8/300 machine instruction set, see
8469 `H8/300 Series Programming Manual'. For information specific to the
8470 H8/300H, see `H8/300H Series Programming Manual' (Renesas).
8472 `as' implements all the standard H8/300 opcodes. No additional
8475 The following table summarizes the H8/300 opcodes, and their
8476 arguments. Entries marked `*' are opcodes used only on the H8/300H.
8625 Four H8/300 instructions (`add', `cmp', `mov', `sub') are defined
8640 File: as.info, Node: HPPA-Dependent, Next: ESA/390-Dependent, Prev: H8/300-Dependent, Up: Machine Dependencies
17380 Support for the Zilog Z8k and Renesas H8/300 processors (tc-z8k,
17383 end to use BFD for some low-level operations, for use with the H8/300
17402 Hewlett-Packard contributed support for the HP9000/300.
18274 * addressing modes, H8/300: H8/300-Addressing. (line 6)
18725 * floating point, H8/300 (IEEE): H8/300 Floating Point.
18755 * H8/300 addressing modes: H8/300-Addressing. (line 6)
18756 * H8/300 floating point (IEEE): H8/300 Floating Point.
18758 * H8/300 line comment character: H8/300-Chars. (line 6)
18759 * H8/300 line separator: H8/300-Chars. (line 8)
18760 * H8/300 machine directives (none): H8/300 Directives. (line 6)
18761 * H8/300 opcode summary: H8/300 Opcodes. (line 6)
18762 * H8/300 options: H8/300 Options. (line 6)
18763 * H8/300 registers: H8/300-Regs. (line 6)
18764 * H8/300 size suffixes: H8/300 Opcodes. (line 163)
18765 * H8/300 support: H8/300-Dependent. (line 6)
18766 * H8/300H, assembling for: H8/300 Directives. (line 8)
18877 * instruction summary, H8/300: H8/300 Opcodes. (line 6)
18883 * int directive, H8/300: H8/300 Directives. (line 6)
18945 * line comment character, H8/300: H8/300-Chars. (line 6)
18965 * line separator, H8/300: H8/300-Chars. (line 8)
19063 * machine directives, H8/300 (none): H8/300 Directives. (line 6)
19157 * mnemonics, H8/300: H8/300 Opcodes. (line 6)
19224 * opcode summary, H8/300: H8/300 Opcodes. (line 6)
19269 * options, H8/300: H8/300 Options. (line 6)
19367 * register names, H8/300: H8/300-Regs. (line 6)
19484 * size suffixes, H8/300: H8/300 Opcodes. (line 163)
19534 * statement separator, H8/300: H8/300-Chars. (line 8)
19723 * word directive, H8/300: H8/300 Directives. (line 6)
20037 Node: H8/300-Dependent292436
20038 Node: H8/300 Options292848
20039 Node: H8/300 Syntax293115
20040 Node: H8/300-Chars293416
20041 Node: H8/300-Regs293715
20042 Node: H8/300-Addressing294634
20043 Node: H8/300 Floating Point295675
20044 Node: H8/300 Directives296002
20045 Node: H8/300 Opcodes297130
