1 /* 2 * Copyright (C) 2010 NXP Semiconductors 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 /* 18 * \file phFriNfc_MifULFormat.h 19 * \brief NFC Ndef Formatting For Mifare standard card. 20 * 21 * Project: NFC-FRI 22 * 23 * $Date: Mon Dec 13 14:14:12 2010 $ 24 * $Author: ing02260 $ 25 * $Revision: 1.5 $ 26 * $Aliases: $ 27 * 28 */ 29 30 #ifndef PHFRINFC_MIFULFORMAT_H 31 #define PHFRINFC_MIFULFORMAT_H 32 33 #include <phFriNfc.h> 34 #ifdef PH_HAL4_ENABLE 35 #include <phHal4Nfc.h> 36 #else 37 #include <phHalNfc.h> 38 #endif 39 #include <phNfcStatus.h> 40 #include <phNfcTypes.h> 41 #include <phFriNfc_SmtCrdFmt.h> 42 43 #ifdef PH_NDEF_MIFARE_ULC 44 #include <phFriNfc_NdefMap.h> 45 #endif /* #ifdef PH_NDEF_MIFARE_ULC */ 46 47 #define PH_FRINFC_MIFUL_FORMAT_FILEREVISION "$Revision: 1.5 $" 48 #define PH_FRINFC_MIFUL_FORMAT_FILEALIASES "$Aliases: $" 49 50 51 /*! 52 * \name Mifare UL - constants for the state 53 * 54 */ 55 /*@{*/ 56 #define PH_FRINFC_MFUL_FMT_RESET_INIT 0 /*!< Reset state */ 57 #define PH_FRINFC_MFUL_FMT_RD_16BYTES 1 /*!< Read 16 bytes */ 58 #define PH_FRINFC_MFUL_FMT_WR_OTPBYTES 2 /*!< Write OTP bytes */ 59 #define PH_FRINFC_MFUL_FMT_WR_TLV 3 /*!< Write TLV */ 60 #ifdef PH_NDEF_MIFARE_ULC 61 #define PH_FRINFC_MFUL_FMT_WR_TLV1 4 /*!< Write TLV (second part) */ 62 #endif /* #ifdef PH_NDEF_MIFARE_ULC */ 63 #ifdef FRINFC_READONLY_NDEF 64 #define PH_FRINFC_MFUL_FMT_RO_RD_16BYTES 5 /*!< Read only the tag */ 65 #define PH_FRINFC_MFUL_FMT_RO_WR_LOCK_BYTES 6 /*!< Write lock bytes to make the tag Read only */ 66 #define PH_FRINFC_MFUL_FMT_RO_WR_OTP_BYTES 7 /*!< Write OTP bytes to make the tag Read only */ 67 68 #ifdef PH_NDEF_MIFARE_ULC 69 #define PH_FRINFC_MFUL_FMT_RO_RD_DYN_LOCK_BYTES 8 /*!< Read default dynamic lock bytes address */ 70 #define PH_FRINFC_MFUL_FMT_RO_WR_DYN_LOCK_BYTES 9 /*!< Write default dynamic lock bytes address */ 71 #define PH_FRINFC_MFUL_FMT_RO_PARSE_NDEF 10 /*!< Write default dynamic lock bytes address */ 72 #define PH_FRINFC_MFUL_FMT_RO_NDEF_PARSE_RD_BYTES 12 /*!< Read bytes from the card for parsing NDEF */ 73 #endif /* #ifdef PH_NDEF_MIFARE_ULC */ 74 75 #endif /* #ifdef FRINFC_READONLY_NDEF */ 76 77 /*@}*/ 78 79 80 /*! 81 * \name Mifare standard - Block numbers 82 * 83 */ 84 /*@{*/ 85 #define PH_FRINFC_MFUL_FMT_LOCK_BITS_VAL 0x00 /*!< Lock bits block is 2 */ 86 87 /*@}*/ 88 89 /*! 90 * \name Mifare UL - OTP bytes 91 * 92 */ 93 /*@{*/ 94 #ifdef PH_NDEF_MIFARE_ULC 95 #define PH_FRINFC_MFULC_FMT_OTP_BYTES {0xE1, 0x10, 0x12, 0x00} /*!< OTP bytes macro */ 96 #endif /* #ifdef PH_NDEF_MIFARE_ULC */ 97 #define PH_FRINFC_MFUL_FMT_OTP_BYTES {0xE1, 0x10, 0x06, 0x00} /*!< OTP bytes macro */ 98 99 /*@}*/ 100 101 /*! 102 * \name Mifare UL - enums the values 103 * 104 */ 105 /*@{*/ 106 enum{ 107 PH_FRINFC_MFUL_FMT_VAL_0, 108 PH_FRINFC_MFUL_FMT_VAL_1, 109 PH_FRINFC_MFUL_FMT_VAL_2, 110 PH_FRINFC_MFUL_FMT_VAL_3, 111 PH_FRINFC_MFUL_FMT_VAL_4, 112 PH_FRINFC_MFUL_FMT_VAL_5, 113 PH_FRINFC_MFUL_FMT_VAL_6, 114 PH_FRINFC_MFUL_FMT_VAL_7 115 }; 116 /*@}*/ 117 118 /*! 119 * \name Mifare UL - constants 120 * 121 */ 122 /*@{*/ 123 #define PH_FRINFC_MFUL_FMT_NON_NDEF_COMPL 0 /*!< Card is not ndef compliant */ 124 #define PH_FRINFC_MFUL_FMT_NDEF_COMPL 1 /*!< Card is ndef compliant */ 125 /*@}*/ 126 127 /*! 128 * \name Mifare UL - constants 129 * 130 */ 131 /*@{*/ 132 #define PH_FRINFC_MFUL_FMT_MAX_RECV_LENGTH 252 /*!< Maximum receive length */ 133 #define PH_FRINFC_MFUL_FMT_WR_SEND_LENGTH 5 /*!< Send length for write */ 134 #define PH_FRINFC_MFUL_FMT_MAX_BLK 16 /*!< Maximum blocks */ 135 136 /*@}*/ 137 138 /*! 139 * \name Mifare UL - constants for filling send buffer, calculating the block number, 140 * checking the authenticate state 141 * 142 */ 143 /*@{*/ 144 145 /*@}*/ 146 147 148 /** 149 * \ingroup grp_fri_smart_card_formatting 150 * \brief Smart Card Formatting \b Reset function 151 * 152 * \copydoc page_reg Resets the component instance to the initial state and initializes the 153 * internal variables. 154 */ 155 void phFriNfc_MfUL_Reset(phFriNfc_sNdefSmtCrdFmt_t *NdefSmtCrdFmt); 156 157 /*! 158 * \ingroup grp_fri_smart_card_formatting 159 * 160 * \brief Initiates the card formatting procedure for Remote Smart Card Type. 161 * 162 * \copydoc page_ovr The function initiates and formats the Smart Card.After this formation, remote 163 * card would be properly initialized and Ndef Compliant. 164 * Depending upon the different card type, this function handles formatting procedure. 165 * This function also handles the different recovery procedures for different types of the cards. For both 166 * Format and Recovery Management same API is used. 167 * 168 * \param[in] phFriNfc_sNdefSmartCardFmt_t Pointer to a valid instance of the \ref phFriNfc_sNdefSmartCardFmt_t 169 * structure describing the component context. 170 * \retval NFCSTATUS_PENDING The action has been successfully triggered. 171 * \retval Other values An error has occurred. 172 * 173 */ 174 NFCSTATUS phFriNfc_MfUL_Format(phFriNfc_sNdefSmtCrdFmt_t *NdefSmtCrdFmt); 175 176 #ifdef FRINFC_READONLY_NDEF 177 178 /*! 179 * \ingroup grp_fri_smart_card_formatting 180 * 181 * \brief Initiates the conversion of the already NDEF formatted tag to READ ONLY. 182 * 183 * \copydoc page_ovr The function initiates the conversion of the already NDEF formatted 184 * tag to READ ONLY.After this formation, remote card would be properly Ndef Compliant and READ ONLY. 185 * Depending upon the different card type, this function handles formatting procedure. 186 * 187 * \param[in] phFriNfc_sNdefSmartCardFmt_t Pointer to a valid instance of the \ref phFriNfc_sNdefSmartCardFmt_t 188 * structure describing the component context. 189 * \retval NFCSTATUS_PENDING The action has been successfully triggered. 190 * \retval Other values An error has occurred. 191 * 192 */ 193 NFCSTATUS 194 phFriNfc_MfUL_ConvertToReadOnly ( 195 phFriNfc_sNdefSmtCrdFmt_t *NdefSmtCrdFmt); 196 197 #endif /* #ifdef FRINFC_READONLY_NDEF */ 198 199 /** 200 *\ingroup grp_fri_smart_card_formatting 201 * 202 * \brief Smart card Formatting \b Completion \b Routine or \b Process function 203 * 204 * \copydoc page_ovr Completion Routine: This function is called by the lower layer (OVR HAL) 205 * when an I/O operation has finished. The internal state machine decides 206 * whether to call into the lower device again or to complete the process 207 * by calling into the upper layer's completion routine, stored within this 208 * component's context (\ref phFriNfc_sNdefSmtCrdFmt_t). 209 * 210 * The function call scheme is according to \ref grp_interact. No State reset is performed during 211 * operation. 212 * 213 * \param[in] Context The context of the current (not the lower/upper) instance, as set by the lower, 214 * calling layer, upon its completion. 215 * \param[in] Status The completion status of the lower layer (to be handled by the implementation of 216 * the state machine of this function like a regular return value of an internally 217 * called function). 218 * 219 * \note For general information about the completion routine interface please see \ref pphFriNfc_Cr_t . * The Different Status Values are as follows 220 * 221 */ 222 void phFriNfc_MfUL_Process(void *Context, 223 NFCSTATUS Status); 224 #endif /* PHFRINFC_MIFULFORMAT_H */ 225 226
