Lines Matching refs:Router
979 fe80::200:cff:fe76:3f85 dev eth0 lladdr 00:00:0c:76:3f:85 router \
1018 IPv6 neighbours can be marked with the additional flag \verb|router|
1019 which means that the neighbour introduced itself as an IPv6 router~\cite{RFC-NDISC}.
1124 from transport protocols to select a working router, so the order
1126 fiddling with default routes manually is not recommended. Use the Router Discovery
1144 next hop router) and some optional attributes (f.e. the path MTU or
1258 --- the address of the nexthop router. Actually, the sense of this field depends
1260 router or, if it is a direct route installed in BSD compatibility mode,
1351 \item \verb|via ADDRESS| is the nexthop router.
1385 \item \verb|ra| --- the route was installed by Router Discovery protocol.
1564 on a router:
1847 deliver) the packet to local IP listeners. In this case the router
1882 What happened? Router 193.233.7.254 understood that we have a much
2093 In the last case the router does not translate the packets,
2260 to the router, wait for duplicated packets on the wire.
2264 a router and, especially, that it is not a transparent proxy or masquerading
2563 attributes. F.e.\ a BGP router knows route ASPATH, its community;
2564 an OSPF router knows the route tag or its area. The administrator, when adding
2617 This shows that this router received 153805 packets from
2746 \verb|/proc/sys/net/ipv4/conf/<dev>/proxy_arp| to 1. After this, the router
2754 However, this approach fails in the case of IPv6 because the router
2780 If the name of the device is not given, the router will answer solicitations
2783 \verb|ip neigh|, the router {\em will not\/} answer a query if the route
2815 is the requirement that the router keep the state of all the TCP connections
2816 going via it. Well, if the router is so powerful, run apache on it. 8)
2852 of the translating router. The router answers ARP for it, advertises
2853 this address as routed via it, {\em et al\/}. When the router
2866 by our router, it should translate the source address 193.233.7.83
2876 If it is just a random address the router will not map to it.
2879 router (or 0.0.0.0) and masquerading is configured in the linux-2.2
2880 kernel. In this case the router will masquerade the packets as this address.
3081 \# {\bf Step 7} --- Restart router discovery and exit.
3096 the interface, adds some control routes and restarts Router Discovery
3114 \noindent\# This function determines, whether it is router or host.\\
3115 \# It returns 0, if the host is apparently not router.
3133 \# This function restarts Router Discovery.\\
3308 \# Do not make this step on router or if the device is not ARPable.\\
