Lines Matching refs:network
19 # file whenever configuration is changed (e.g., new network block is added with
26 # global configuration (shared by all network blocks)
46 # possible to run wpa_supplicant as root (since it needs to change network
49 # change the network configuration, this access needs to be protected in many
93 # the currently enabled networks are found, a new network (IBSS or AP mode
103 # the network blocks in the configuration file are tried one by one until
104 # the driver reports successful association; each network block should have
107 # When using IBSS or AP mode, ap_scan=2 mode can force the new network to be
110 # networks are found, a new IBSS or AP mode network is created.
133 # loaded here before being used in the network blocks. By default, EAP methods
192 # 6-0050F204-1 (Network Infrastructure / AP)
280 # Automatic network selection behavior
281 # 0 = do not automatically go through Interworking network selection
283 # 1 = perform Interworking network selection if one or more
285 # matching network block
290 # Each credential used for automatic network selection is configured as a set
299 # (and similarly in struct wpa_ssid for network blocks) to change the
301 # network (based on either an enabled network block or a credential)
308 # username: Username for Interworking network selection
310 # password: Password for Interworking network selection
312 # ca_cert: CA certificate for Interworking network selection
362 # Consortium to match the network, the EAP parameters need to be
406 # network block
408 # Each network (usually AP's sharing the same SSID) is configured as a separate
409 # block in this configuration file. The network blocks are in preference order
412 # network block fields:
415 # 0 = this network can be used (default)
416 # 1 = this network block is disabled (can be enabled through ctrl_iface,
419 # id_str: Network identifier string for external scripts. This value is passed
421 # variable to make it easier to do network specific configuration.
423 # ssid: SSID (mandatory); network name in one of the optional formats:
434 # bssid: BSSID (optional); if set, this network block is used only when
442 # priority value, the sooner the network is matched against the scan results).
455 # following network block options:
463 # an IBSS network with the configured SSID is already present, the frequency of
464 # the network will be used instead of this configured value.
468 # BSS. If the subset of channels used by the network is known, this option can
469 # be used to optimize scanning to not occur on channels that the network does
505 # LEAP = LEAP/Network EAP (only used with LEAP)
740 # small enough to make the EAP messages fit in MTU of the network
793 network={
801 network={
809 network={
820 network={
832 network={
849 network={
863 network={
876 network={
889 network={
907 network={
919 network={
926 network={
936 network={
949 network={
963 network={
972 network={
981 network={
992 network={
1004 network={
1011 network={
1024 network={
1036 # IBSS/ad-hoc network with WPA-None/TKIP.
1037 network={
1050 network={
1068 network={
1101 network={
1119 network={
