Lines Matching full:focus
21 * This file contains functionality for handling focus configurations.
63 CAMHAL_LOGEB("Focus areas supported %d, focus areas set %d",
107 CAMHAL_LOGDA("Auto focus got canceled before doAutoFocus could be called");
127 focusControl.eFocusControl = ( OMX_IMAGE_FOCUSCONTROLTYPE ) mParameters3A.Focus;
138 } else if ( mParameters3A.Focus == OMX_IMAGE_FocusControlAuto ) {
144 CAMHAL_LOGEB("Focus status check failed 0x%x!", ret);
147 CAMHAL_LOGDB("Focus status check 0x%x!", focusStatus.eFocusStatus);
155 (mParameters3A.Focus != (OMX_IMAGE_FOCUSCONTROLTYPE)OMX_IMAGE_FocusControlAuto) )
160 //Enable focus scanning
181 CAMHAL_LOGEB("Error while starting focus 0x%x", eError);
187 // configure focus timeout based on capture mode
199 CAMHAL_LOGEA("Invalid State after Auto Focus Exitting!!!");
209 } else { // Focus mode in continuous
241 if ( mParameters3A.Focus == OMX_IMAGE_FocusControlAutoInfinity ) {
242 // No need to stop focus if we are in infinity mode. Nothing to stop.
254 CAMHAL_LOGEB("Error while stopping focus 0x%x", eError);
290 CAMHAL_LOGEB("Error while retrieving focus mode 0x%x", eError);
372 CAMHAL_LOGEB("Error registering focus callback 0x%x", eError);
402 /// We don't send focus callback if focus was not started
403 CAMHAL_LOGDA("Not sending focus callback because focus was not started");
416 CAMHAL_LOGEA("Focus status check failed!");
451 CAMHAL_LOGDA("Focus locked. Applied focus locks successfully");
456 //Query current focus distance after AF is complete
475 // After focus, face detection will resume sending face callbacks
492 CAMHAL_LOGEA("Invalid focus status");
516 CAMHAL_LOGEB("Error while retrieving focus status: 0x%x", eError);
523 CAMHAL_LOGDB("Focus Status: %d", eFocusStatus->eFocusStatus);
582 CAMHAL_LOGEB("Error while querying focus distances 0x%x", eError);
608 if(mParameters3A.Focus == OMX_IMAGE_FocusControlAutoInfinity)
646 CAMHAL_LOGEB("Error encoding near focus distance 0x%x", ret);
655 CAMHAL_LOGEB("Error encoding near focus distance 0x%x", ret);
664 CAMHAL_LOGEB("Error encoding near focus distance 0x%x", ret);
711 CAMHAL_LOGEB("Error allocating buffer for focus areas %d", eError);
749 CAMHAL_LOGDB("Focus area %d : top = %d left = %d width = %d height = %d prio = %d",
773 CAMHAL_LOGEB("Error while setting Focus Areas configuration 0x%x", eError);
802 CAMHAL_LOGEA("Focus status check failed!");
819 if (mParameters3A.Focus != (OMX_IMAGE_FOCUSCONTROLTYPE) OMX_IMAGE_FocusControlAuto) {
820 CAMHAL_LOGDA("unregistered focus callback when not in CAF or doAutoFocus... not handling");
