1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * This file contains the Bluetooth Manager (BTM) API function external 22 * definitions. 23 * 24 ******************************************************************************/ 25 #ifndef BTM_API_H 26 #define BTM_API_H 27 28 #include "bt_target.h" 29 #include "sdp_api.h" 30 #include "hcidefs.h" 31 32 #if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE 33 #include "smp_api.h" 34 #endif 35 /***************************************************************************** 36 ** DEVICE CONTROL and COMMON 37 *****************************************************************************/ 38 /***************************** 39 ** Device Control Constants 40 ******************************/ 41 /* Maximum number of bytes allowed for vendor specific command parameters */ 42 #define BTM_MAX_VENDOR_SPECIFIC_LEN HCI_COMMAND_SIZE 43 44 /* BTM application return status codes */ 45 enum 46 { 47 BTM_SUCCESS = 0, /* 0 Command succeeded */ 48 BTM_CMD_STARTED, /* 1 Command started OK. */ 49 BTM_BUSY, /* 2 Device busy with another command */ 50 BTM_NO_RESOURCES, /* 3 No resources to issue command */ 51 BTM_MODE_UNSUPPORTED, /* 4 Request for 1 or more unsupported modes */ 52 BTM_ILLEGAL_VALUE, /* 5 Illegal parameter value */ 53 BTM_WRONG_MODE, /* 6 Device in wrong mode for request */ 54 BTM_UNKNOWN_ADDR, /* 7 Unknown remote BD address */ 55 BTM_DEVICE_TIMEOUT, /* 8 Device timeout */ 56 BTM_BAD_VALUE_RET, /* 9 A bad value was received from HCI */ 57 BTM_ERR_PROCESSING, /* 10 Generic error */ 58 BTM_NOT_AUTHORIZED, /* 11 Authorization failed */ 59 BTM_DEV_RESET, /* 12 Device has been reset */ 60 BTM_CMD_STORED, /* 13 request is stored in control block */ 61 BTM_ILLEGAL_ACTION, /* 14 state machine gets illegal command */ 62 BTM_DELAY_CHECK, /* 15 delay the check on encryption */ 63 BTM_SCO_BAD_LENGTH, /* 16 Bad SCO over HCI data length */ 64 BTM_SUCCESS_NO_SECURITY, /* 17 security passed, no security set */ 65 BTM_FAILED_ON_SECURITY , /* 18 security failed */ 66 BTM_REPEATED_ATTEMPTS /* 19 repeated attempts for LE security requests */ 67 }; 68 typedef UINT8 tBTM_STATUS; 69 70 /************************* 71 ** Device Control Types 72 **************************/ 73 #define BTM_DEVICE_ROLE_BR 0x01 74 #define BTM_DEVICE_ROLE_DUAL 0x02 75 #define BTM_MAX_DEVICE_ROLE BTM_DEVICE_ROLE_DUAL 76 typedef UINT8 tBTM_DEVICE_ROLE; 77 78 /* Device name of peer (may be truncated to save space in BTM database) */ 79 typedef UINT8 tBTM_BD_NAME[BTM_MAX_REM_BD_NAME_LEN + 1]; 80 81 /* Structure returned with local version information */ 82 typedef struct 83 { 84 UINT8 hci_version; 85 UINT16 hci_revision; 86 UINT8 lmp_version; 87 UINT16 manufacturer; 88 UINT16 lmp_subversion; 89 } tBTM_VERSION_INFO; 90 91 /* Structure returned with Vendor Specific Command complete callback */ 92 typedef struct 93 { 94 UINT16 opcode; 95 UINT16 param_len; 96 UINT8 *p_param_buf; 97 } tBTM_VSC_CMPL; 98 99 #define BTM_VSC_CMPL_DATA_SIZE (BTM_MAX_VENDOR_SPECIFIC_LEN + sizeof(tBTM_VSC_CMPL)) 100 /************************************************** 101 ** Device Control and General Callback Functions 102 ***************************************************/ 103 /* Callback function for when device status changes. Appl must poll for 104 ** what the new state is (BTM_IsDeviceUp). The event occurs whenever the stack 105 ** has detected that the controller status has changed. This asynchronous event 106 ** is enabled/disabled by calling BTM_RegisterForDeviceStatusNotif(). 107 */ 108 enum 109 { 110 BTM_DEV_STATUS_UP, 111 BTM_DEV_STATUS_DOWN, 112 BTM_DEV_STATUS_CMD_TOUT 113 }; 114 115 typedef UINT8 tBTM_DEV_STATUS; 116 117 118 typedef void (tBTM_DEV_STATUS_CB) (tBTM_DEV_STATUS status); 119 120 121 /* Callback function for when a vendor specific event occurs. The length and 122 ** array of returned parameter bytes are included. This asynchronous event 123 ** is enabled/disabled by calling BTM_RegisterForVSEvents(). 124 */ 125 typedef void (tBTM_VS_EVT_CB) (UINT8 len, UINT8 *p); 126 127 128 /* General callback function for notifying an application that a synchronous 129 ** BTM function is complete. The pointer contains the address of any returned data. 130 */ 131 typedef void (tBTM_CMPL_CB) (void *p1); 132 133 /* VSC callback function for notifying an application that a synchronous 134 ** BTM function is complete. The pointer contains the address of any returned data. 135 */ 136 typedef void (tBTM_VSC_CMPL_CB) (tBTM_VSC_CMPL *p1); 137 138 /* Callback for apps to check connection and inquiry filters. 139 ** Parameters are the BD Address of remote and the Dev Class of remote. 140 ** If the app returns none zero, the connection or inquiry result will be dropped. 141 */ 142 typedef UINT8 (tBTM_FILTER_CB) (BD_ADDR bd_addr, DEV_CLASS dc); 143 144 /***************************************************************************** 145 ** DEVICE DISCOVERY - Inquiry, Remote Name, Discovery, Class of Device 146 *****************************************************************************/ 147 /******************************* 148 ** Device Discovery Constants 149 ********************************/ 150 /* Discoverable modes */ 151 #define BTM_NON_DISCOVERABLE 0 152 #define BTM_LIMITED_DISCOVERABLE 1 153 #define BTM_GENERAL_DISCOVERABLE 2 154 #define BTM_DISCOVERABLE_MASK (BTM_LIMITED_DISCOVERABLE|BTM_GENERAL_DISCOVERABLE) 155 #define BTM_MAX_DISCOVERABLE BTM_GENERAL_DISCOVERABLE 156 /* high byte for BLE Discoverable modes */ 157 #define BTM_BLE_NON_DISCOVERABLE 0x0000 158 #define BTM_BLE_LIMITED_DISCOVERABLE 0x0100 159 #define BTM_BLE_GENERAL_DISCOVERABLE 0x0200 160 #define BTM_BLE_MAX_DISCOVERABLE BTM_BLE_GENERAL_DISCOVERABLE 161 #define BTM_BLE_DISCOVERABLE_MASK (BTM_BLE_NON_DISCOVERABLE|BTM_BLE_LIMITED_DISCOVERABLE|BTM_BLE_GENERAL_DISCOVERABLE) 162 163 /* Connectable modes */ 164 #define BTM_NON_CONNECTABLE 0 165 #define BTM_CONNECTABLE 1 166 #define BTM_CONNECTABLE_MASK (BTM_NON_CONNECTABLE | BTM_CONNECTABLE) 167 /* high byte for BLE Connectable modes */ 168 #define BTM_BLE_NON_CONNECTABLE 0x0000 169 #define BTM_BLE_CONNECTABLE 0x0100 170 #define BTM_BLE_MAX_CONNECTABLE BTM_BLE_CONNECTABLE 171 #define BTM_BLE_CONNECTABLE_MASK (BTM_BLE_NON_CONNECTABLE | BTM_BLE_CONNECTABLE) 172 173 /* Inquiry modes 174 * Note: These modes are associated with the inquiry active values (BTM_*ACTIVE) */ 175 #define BTM_GENERAL_INQUIRY 0 176 #define BTM_LIMITED_INQUIRY 1 177 #define BTM_BR_INQUIRY_MASK 0x0f 178 /* high byte of inquiry mode for BLE inquiry mode */ 179 #define BTM_BLE_INQUIRY_NONE 0x00 180 #define BTM_BLE_GENERAL_INQUIRY 0x10 181 #define BTM_BLE_LIMITED_INQUIRY 0x20 182 #define BTM_BLE_INQUIRY_MASK (BTM_BLE_GENERAL_INQUIRY|BTM_BLE_LIMITED_INQUIRY) 183 184 /* BTM_IsInquiryActive return values (Bit Mask) 185 * Note: These bit masks are associated with the inquiry modes (BTM_*_INQUIRY) */ 186 #define BTM_INQUIRY_INACTIVE 0x0 /* no inquiry in progress */ 187 #define BTM_GENERAL_INQUIRY_ACTIVE 0x1 /* a general inquiry is in progress */ 188 #define BTM_LIMITED_INQUIRY_ACTIVE 0x2 /* a limited inquiry is in progress */ 189 #define BTM_PERIODIC_INQUIRY_ACTIVE 0x8 /* a periodic inquiry is active */ 190 #define BTM_SSP_INQUIRY_ACTIVE 0x4 /* SSP is active, so inquiry is disallowed (work around for FW bug) */ 191 192 /* Define scan types */ 193 #define BTM_SCAN_TYPE_STANDARD 0 194 #define BTM_SCAN_TYPE_INTERLACED 1 /* 1.2 devices only */ 195 196 /* Define inquiry results mode */ 197 #define BTM_INQ_RESULT_STANDARD 0 198 #define BTM_INQ_RESULT_WITH_RSSI 1 199 #define BTM_INQ_RESULT_EXTENDED 2 200 201 #define BTM_INQ_RES_IGNORE_RSSI 0x7f /* RSSI value not supplied (ignore it) */ 202 203 /* Inquiry Filter Condition types (see tBTM_INQ_PARMS) */ 204 #define BTM_CLR_INQUIRY_FILTER 0 /* Inquiry Filtering is turned off */ 205 #define BTM_FILTER_COND_DEVICE_CLASS HCI_FILTER_COND_DEVICE_CLASS /* Filter on device class */ 206 #define BTM_FILTER_COND_BD_ADDR HCI_FILTER_COND_BD_ADDR /* Filter on device addr */ 207 208 /* State of the remote name retrieval during inquiry operations. 209 ** Used in the tBTM_INQ_INFO structure, and returned in the 210 ** BTM_InqDbRead, BTM_InqDbFirst, and BTM_InqDbNext functions. 211 ** The name field is valid when the state returned is 212 ** BTM_INQ_RMT_NAME_DONE */ 213 #define BTM_INQ_RMT_NAME_EMPTY 0 214 #define BTM_INQ_RMT_NAME_PENDING 1 215 #define BTM_INQ_RMT_NAME_DONE 2 216 #define BTM_INQ_RMT_NAME_FAILED 3 217 218 /********************************* 219 *** Class of Device constants *** 220 *********************************/ 221 #define BTM_FORMAT_TYPE_1 0x00 222 223 /**************************** 224 ** minor device class field 225 *****************************/ 226 227 /* 0x00 is used as unclassified for all minor device classes */ 228 #define BTM_COD_MINOR_UNCLASSIFIED 0x00 229 230 /* minor device class field for Computer Major Class */ 231 /* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */ 232 #define BTM_COD_MINOR_DESKTOP_WORKSTATION 0x04 233 #define BTM_COD_MINOR_SERVER_COMPUTER 0x08 234 #define BTM_COD_MINOR_LAPTOP 0x0C 235 #define BTM_COD_MINOR_HANDHELD_PC_PDA 0x10 /* clam shell */ 236 #define BTM_COD_MINOR_PALM_SIZE_PC_PDA 0x14 237 #define BTM_COD_MINOR_WEARABLE_COMPUTER 0x18 /* watch sized */ 238 239 /* minor device class field for Phone Major Class */ 240 /* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */ 241 #define BTM_COD_MINOR_CELLULAR 0x04 242 #define BTM_COD_MINOR_CORDLESS 0x08 243 #define BTM_COD_MINOR_SMART_PHONE 0x0C 244 #define BTM_COD_MINOR_WIRED_MDM_V_GTWY 0x10 /* wired modem or voice gatway */ 245 #define BTM_COD_MINOR_ISDN_ACCESS 0x14 246 247 /* minor device class field for LAN Access Point Major Class */ 248 /* Load Factor Field bit 5-7 */ 249 #define BTM_COD_MINOR_FULLY_AVAILABLE 0x00 250 #define BTM_COD_MINOR_1_17_UTILIZED 0x20 251 #define BTM_COD_MINOR_17_33_UTILIZED 0x40 252 #define BTM_COD_MINOR_33_50_UTILIZED 0x60 253 #define BTM_COD_MINOR_50_67_UTILIZED 0x80 254 #define BTM_COD_MINOR_67_83_UTILIZED 0xA0 255 #define BTM_COD_MINOR_83_99_UTILIZED 0xC0 256 #define BTM_COD_MINOR_NO_SERVICE_AVAILABLE 0xE0 257 /* sub-Field bit 2-4 */ 258 /* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */ 259 260 /* minor device class field for Audio/Video Major Class */ 261 /* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */ 262 #define BTM_COD_MINOR_CONFM_HEADSET 0x04 263 #define BTM_COD_MINOR_CONFM_HANDSFREE 0x08 264 #define BTM_COD_MINOR_MICROPHONE 0x10 265 #define BTM_COD_MINOR_LOUDSPEAKER 0x14 266 #define BTM_COD_MINOR_HEADPHONES 0x18 267 #define BTM_COD_MINOR_PORTABLE_AUDIO 0x1C 268 #define BTM_COD_MINOR_CAR_AUDIO 0x20 269 #define BTM_COD_MINOR_SET_TOP_BOX 0x24 270 #define BTM_COD_MINOR_HIFI_AUDIO 0x28 271 #define BTM_COD_MINOR_VCR 0x2C 272 #define BTM_COD_MINOR_VIDEO_CAMERA 0x30 273 #define BTM_COD_MINOR_CAMCORDER 0x34 274 #define BTM_COD_MINOR_VIDEO_MONITOR 0x38 275 #define BTM_COD_MINOR_VIDDISP_LDSPKR 0x3C 276 #define BTM_COD_MINOR_VIDEO_CONFERENCING 0x40 277 #define BTM_COD_MINOR_GAMING_TOY 0x48 278 279 /* minor device class field for Peripheral Major Class */ 280 /* Bits 6-7 independently specify mouse, keyboard, or combo mouse/keyboard */ 281 #define BTM_COD_MINOR_KEYBOARD 0x40 282 #define BTM_COD_MINOR_POINTING 0x80 283 #define BTM_COD_MINOR_COMBO 0xC0 284 /* Bits 2-5 OR'd with selection from bits 6-7 */ 285 /* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */ 286 #define BTM_COD_MINOR_JOYSTICK 0x04 287 #define BTM_COD_MINOR_GAMEPAD 0x08 288 #define BTM_COD_MINOR_REMOTE_CONTROL 0x0C 289 #define BTM_COD_MINOR_SENSING_DEVICE 0x10 290 #define BTM_COD_MINOR_DIGITIZING_TABLET 0x14 291 #define BTM_COD_MINOR_CARD_READER 0x18 /* e.g. SIM card reader */ 292 #define BTM_COD_MINOR_DIGITAL_PAN 0x1C 293 #define BTM_COD_MINOR_HAND_SCANNER 0x20 294 #define BTM_COD_MINOR_HAND_GESTURAL_INPUT 0x24 295 296 /* minor device class field for Imaging Major Class */ 297 /* Bits 5-7 independently specify display, camera, scanner, or printer */ 298 #define BTM_COD_MINOR_DISPLAY 0x10 299 #define BTM_COD_MINOR_CAMERA 0x20 300 #define BTM_COD_MINOR_SCANNER 0x40 301 #define BTM_COD_MINOR_PRINTER 0x80 302 /* Bits 2-3 Reserved */ 303 /* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */ 304 305 /* minor device class field for Wearable Major Class */ 306 /* Bits 2-7 meaningful */ 307 #define BTM_COD_MINOR_WRIST_WATCH 0x04 308 #define BTM_COD_MINOR_PAGER 0x08 309 #define BTM_COD_MINOR_JACKET 0x0C 310 #define BTM_COD_MINOR_HELMET 0x10 311 #define BTM_COD_MINOR_GLASSES 0x14 312 313 /* minor device class field for Toy Major Class */ 314 /* Bits 2-7 meaningful */ 315 #define BTM_COD_MINOR_ROBOT 0x04 316 #define BTM_COD_MINOR_VEHICLE 0x08 317 #define BTM_COD_MINOR_DOLL_ACTION_FIGURE 0x0C 318 #define BTM_COD_MINOR_CONTROLLER 0x10 319 #define BTM_COD_MINOR_GAME 0x14 320 321 /* minor device class field for Health Major Class */ 322 /* Bits 2-7 meaningful */ 323 #define BTM_COD_MINOR_BLOOD_MONITOR 0x04 324 #define BTM_COD_MINOR_THERMOMETER 0x08 325 #define BTM_COD_MINOR_WEIGHING_SCALE 0x0C 326 #define BTM_COD_MINOR_GLUCOSE_METER 0x10 327 #define BTM_COD_MINOR_PULSE_OXIMETER 0x14 328 #define BTM_COD_MINOR_HEART_PULSE_MONITOR 0x18 329 #define BTM_COD_MINOR_HEALTH_DATA_DISPLAY 0x1C 330 #define BTM_COD_MINOR_STEP_COUNTER 0x20 331 #define BTM_COD_MINOR_BODY_COM_ANALYZER 0x24 332 #define BTM_COD_MINOR_PEAK_FLOW_MONITOR 0x28 333 #define BTM_COD_MINOR_MEDICATION_MONITOR 0x2C 334 #define BTM_COD_MINOR_KNEE_PROSTHESIS 0x30 335 #define BTM_COD_MINOR_ANKLE_PROSTHESIS 0x34 336 337 338 /*************************** 339 ** major device class field 340 ****************************/ 341 #define BTM_COD_MAJOR_MISCELLANEOUS 0x00 342 #define BTM_COD_MAJOR_COMPUTER 0x01 343 #define BTM_COD_MAJOR_PHONE 0x02 344 #define BTM_COD_MAJOR_LAN_ACCESS_PT 0x03 345 #define BTM_COD_MAJOR_AUDIO 0x04 346 #define BTM_COD_MAJOR_PERIPHERAL 0x05 347 #define BTM_COD_MAJOR_IMAGING 0x06 348 #define BTM_COD_MAJOR_WEARABLE 0x07 349 #define BTM_COD_MAJOR_TOY 0x08 350 #define BTM_COD_MAJOR_HEALTH 0x09 351 #define BTM_COD_MAJOR_UNCLASSIFIED 0x1F 352 353 /*************************** 354 ** service class fields 355 ****************************/ 356 #define BTM_COD_SERVICE_LMTD_DISCOVER 0x0020 357 #define BTM_COD_SERVICE_POSITIONING 0x0100 358 #define BTM_COD_SERVICE_NETWORKING 0x0200 359 #define BTM_COD_SERVICE_RENDERING 0x0400 360 #define BTM_COD_SERVICE_CAPTURING 0x0800 361 #define BTM_COD_SERVICE_OBJ_TRANSFER 0x1000 362 #define BTM_COD_SERVICE_AUDIO 0x2000 363 #define BTM_COD_SERVICE_TELEPHONY 0x4000 364 #define BTM_COD_SERVICE_INFORMATION 0x8000 365 366 /* class of device field macros */ 367 #define BTM_COD_FORMAT_TYPE(u8, pd) {u8 = pd[2]&0x03;} 368 #define BTM_COD_MINOR_CLASS(u8, pd) {u8 = pd[2]&0xFC;} 369 #define BTM_COD_MAJOR_CLASS(u8, pd) {u8 = pd[1]&0x1F;} 370 #define BTM_COD_SERVICE_CLASS(u16, pd) {u16 = pd[0]; u16<<=8; u16 += pd[1]&0xE0;} 371 372 /* to set the fields (assumes that format type is always 0) */ 373 #define FIELDS_TO_COD(pd, mn, mj, sv) {pd[2] = mn; pd[1] = \ 374 mj+ ((sv)&BTM_COD_SERVICE_CLASS_LO_B); \ 375 pd[0] = (sv) >> 8;} 376 377 /* the COD masks */ 378 #define BTM_COD_FORMAT_TYPE_MASK 0x03 379 #define BTM_COD_MINOR_CLASS_MASK 0xFC 380 #define BTM_COD_MAJOR_CLASS_MASK 0x1F 381 #define BTM_COD_SERVICE_CLASS_LO_B 0x00E0 382 #define BTM_COD_SERVICE_CLASS_MASK 0xFFE0 383 384 385 /* BTM service definitions 386 ** Used for storing EIR data to bit mask 387 */ 388 #ifndef BTM_EIR_UUID_LKUP_TBL 389 enum 390 { 391 BTM_EIR_UUID_SERVCLASS_SERVICE_DISCOVERY_SERVER, 392 /* BTM_EIR_UUID_SERVCLASS_BROWSE_GROUP_DESCRIPTOR, */ 393 /* BTM_EIR_UUID_SERVCLASS_PUBLIC_BROWSE_GROUP, */ 394 BTM_EIR_UUID_SERVCLASS_SERIAL_PORT, 395 BTM_EIR_UUID_SERVCLASS_LAN_ACCESS_USING_PPP, 396 BTM_EIR_UUID_SERVCLASS_DIALUP_NETWORKING, 397 BTM_EIR_UUID_SERVCLASS_IRMC_SYNC, 398 BTM_EIR_UUID_SERVCLASS_OBEX_OBJECT_PUSH, 399 BTM_EIR_UUID_SERVCLASS_OBEX_FILE_TRANSFER, 400 BTM_EIR_UUID_SERVCLASS_IRMC_SYNC_COMMAND, 401 BTM_EIR_UUID_SERVCLASS_HEADSET, 402 BTM_EIR_UUID_SERVCLASS_CORDLESS_TELEPHONY, 403 BTM_EIR_UUID_SERVCLASS_AUDIO_SOURCE, 404 BTM_EIR_UUID_SERVCLASS_AUDIO_SINK, 405 BTM_EIR_UUID_SERVCLASS_AV_REM_CTRL_TARGET, 406 /* BTM_EIR_UUID_SERVCLASS_ADV_AUDIO_DISTRIBUTION, */ 407 BTM_EIR_UUID_SERVCLASS_AV_REMOTE_CONTROL, 408 /* BTM_EIR_UUID_SERVCLASS_VIDEO_CONFERENCING, */ 409 BTM_EIR_UUID_SERVCLASS_INTERCOM, 410 BTM_EIR_UUID_SERVCLASS_FAX, 411 BTM_EIR_UUID_SERVCLASS_HEADSET_AUDIO_GATEWAY, 412 /* BTM_EIR_UUID_SERVCLASS_WAP, */ 413 /* BTM_EIR_UUID_SERVCLASS_WAP_CLIENT, */ 414 BTM_EIR_UUID_SERVCLASS_PANU, 415 BTM_EIR_UUID_SERVCLASS_NAP, 416 BTM_EIR_UUID_SERVCLASS_GN, 417 BTM_EIR_UUID_SERVCLASS_DIRECT_PRINTING, 418 /* BTM_EIR_UUID_SERVCLASS_REFERENCE_PRINTING, */ 419 BTM_EIR_UUID_SERVCLASS_IMAGING, 420 BTM_EIR_UUID_SERVCLASS_IMAGING_RESPONDER, 421 BTM_EIR_UUID_SERVCLASS_IMAGING_AUTO_ARCHIVE, 422 BTM_EIR_UUID_SERVCLASS_IMAGING_REF_OBJECTS, 423 BTM_EIR_UUID_SERVCLASS_HF_HANDSFREE, 424 BTM_EIR_UUID_SERVCLASS_AG_HANDSFREE, 425 BTM_EIR_UUID_SERVCLASS_DIR_PRT_REF_OBJ_SERVICE, 426 /* BTM_EIR_UUID_SERVCLASS_REFLECTED_UI, */ 427 BTM_EIR_UUID_SERVCLASS_BASIC_PRINTING, 428 BTM_EIR_UUID_SERVCLASS_PRINTING_STATUS, 429 BTM_EIR_UUID_SERVCLASS_HUMAN_INTERFACE, 430 BTM_EIR_UUID_SERVCLASS_CABLE_REPLACEMENT, 431 BTM_EIR_UUID_SERVCLASS_HCRP_PRINT, 432 BTM_EIR_UUID_SERVCLASS_HCRP_SCAN, 433 /* BTM_EIR_UUID_SERVCLASS_COMMON_ISDN_ACCESS, */ 434 /* BTM_EIR_UUID_SERVCLASS_VIDEO_CONFERENCING_GW, */ 435 /* BTM_EIR_UUID_SERVCLASS_UDI_MT, */ 436 /* BTM_EIR_UUID_SERVCLASS_UDI_TA, */ 437 /* BTM_EIR_UUID_SERVCLASS_VCP, */ 438 BTM_EIR_UUID_SERVCLASS_SAP, 439 BTM_EIR_UUID_SERVCLASS_PBAP_PCE, 440 BTM_EIR_UUID_SERVCLASS_PBAP_PSE, 441 /* BTM_EIR_UUID_SERVCLASS_TE_PHONE_ACCESS, */ 442 /* BTM_EIR_UUID_SERVCLASS_ME_PHONE_ACCESS, */ 443 BTM_EIR_UUID_SERVCLASS_PHONE_ACCESS, 444 BTM_EIR_UUID_SERVCLASS_HEADSET_HS, 445 BTM_EIR_UUID_SERVCLASS_PNP_INFORMATION, 446 /* BTM_EIR_UUID_SERVCLASS_GENERIC_NETWORKING, */ 447 /* BTM_EIR_UUID_SERVCLASS_GENERIC_FILETRANSFER, */ 448 /* BTM_EIR_UUID_SERVCLASS_GENERIC_AUDIO, */ 449 /* BTM_EIR_UUID_SERVCLASS_GENERIC_TELEPHONY, */ 450 /* BTM_EIR_UUID_SERVCLASS_UPNP_SERVICE, */ 451 /* BTM_EIR_UUID_SERVCLASS_UPNP_IP_SERVICE, */ 452 /* BTM_EIR_UUID_SERVCLASS_ESDP_UPNP_IP_PAN, */ 453 /* BTM_EIR_UUID_SERVCLASS_ESDP_UPNP_IP_LAP, */ 454 /* BTM_EIR_UUID_SERVCLASS_ESDP_UPNP_IP_L2CAP, */ 455 BTM_EIR_UUID_SERVCLASS_VIDEO_SOURCE, 456 BTM_EIR_UUID_SERVCLASS_VIDEO_SINK, 457 /* BTM_EIR_UUID_SERVCLASS_VIDEO_DISTRIBUTION */ 458 /* BTM_EIR_UUID_SERVCLASS_HDP_PROFILE */ 459 BTM_EIR_UUID_SERVCLASS_MESSAGE_ACCESS, 460 BTM_EIR_UUID_SERVCLASS_MESSAGE_NOTIFICATION, 461 BTM_EIR_UUID_SERVCLASS_HDP_SOURCE, 462 BTM_EIR_UUID_SERVCLASS_HDP_SINK, 463 BTM_EIR_MAX_SERVICES 464 }; 465 #endif /* BTM_EIR_UUID_LKUP_TBL */ 466 467 /* search result in EIR of inquiry database */ 468 #define BTM_EIR_FOUND 0 469 #define BTM_EIR_NOT_FOUND 1 470 #define BTM_EIR_UNKNOWN 2 471 472 typedef UINT8 tBTM_EIR_SEARCH_RESULT; 473 474 #define BTM_EIR_FLAGS_TYPE HCI_EIR_FLAGS_TYPE /* 0x01 */ 475 #define BTM_EIR_MORE_16BITS_UUID_TYPE HCI_EIR_MORE_16BITS_UUID_TYPE /* 0x02 */ 476 #define BTM_EIR_COMPLETE_16BITS_UUID_TYPE HCI_EIR_COMPLETE_16BITS_UUID_TYPE /* 0x03 */ 477 #define BTM_EIR_MORE_32BITS_UUID_TYPE HCI_EIR_MORE_32BITS_UUID_TYPE /* 0x04 */ 478 #define BTM_EIR_COMPLETE_32BITS_UUID_TYPE HCI_EIR_COMPLETE_32BITS_UUID_TYPE /* 0x05 */ 479 #define BTM_EIR_MORE_128BITS_UUID_TYPE HCI_EIR_MORE_128BITS_UUID_TYPE /* 0x06 */ 480 #define BTM_EIR_COMPLETE_128BITS_UUID_TYPE HCI_EIR_COMPLETE_128BITS_UUID_TYPE /* 0x07 */ 481 #define BTM_EIR_SHORTENED_LOCAL_NAME_TYPE HCI_EIR_SHORTENED_LOCAL_NAME_TYPE /* 0x08 */ 482 #define BTM_EIR_COMPLETE_LOCAL_NAME_TYPE HCI_EIR_COMPLETE_LOCAL_NAME_TYPE /* 0x09 */ 483 #define BTM_EIR_TX_POWER_LEVEL_TYPE HCI_EIR_TX_POWER_LEVEL_TYPE /* 0x0A */ 484 #define BTM_EIR_MANUFACTURER_SPECIFIC_TYPE HCI_EIR_MANUFACTURER_SPECIFIC_TYPE /* 0xFF */ 485 486 /* the following EIR tags are defined to OOB, not regular EIR data */ 487 #define BTM_EIR_OOB_BD_ADDR_TYPE HCI_EIR_OOB_BD_ADDR_TYPE /* 6 bytes */ 488 #define BTM_EIR_OOB_COD_TYPE HCI_EIR_OOB_COD_TYPE /* 3 bytes */ 489 #define BTM_EIR_OOB_SSP_HASH_C_TYPE HCI_EIR_OOB_SSP_HASH_C_TYPE /* 16 bytes */ 490 #define BTM_EIR_OOB_SSP_RAND_R_TYPE HCI_EIR_OOB_SSP_RAND_R_TYPE /* 16 bytes */ 491 492 #define BTM_OOB_MANDATORY_SIZE 8 /* include 2 bytes length & 6 bytes bd_addr */ 493 #define BTM_OOB_DATA_LEN_SIZE 2 494 #define BTM_OOB_BD_ADDR_SIZE 6 495 #define BTM_OOB_COD_SIZE BT_OOB_COD_SIZE 496 #define BTM_OOB_HASH_C_SIZE BT_OOB_HASH_C_SIZE 497 #define BTM_OOB_RAND_R_SIZE BT_OOB_RAND_R_SIZE 498 499 500 #if BLE_INCLUDED == TRUE 501 #define BTM_BLE_SEC_NONE 0 502 #define BTM_BLE_SEC_ENCRYPT 1 /* encrypt the link using current key */ 503 #define BTM_BLE_SEC_ENCRYPT_NO_MITM 2 504 #define BTM_BLE_SEC_ENCRYPT_MITM 3 505 typedef UINT8 tBTM_BLE_SEC_ACT; 506 #endif 507 /************************************************************************************************ 508 ** BTM Services MACROS handle array of UINT32 bits for more than 32 services 509 *************************************************************************************************/ 510 /* Determine the number of UINT32's necessary for services */ 511 #define BTM_EIR_ARRAY_BITS 32 /* Number of bits in each array element */ 512 #define BTM_EIR_SERVICE_ARRAY_SIZE (((UINT32)BTM_EIR_MAX_SERVICES / BTM_EIR_ARRAY_BITS) + \ 513 (((UINT32)BTM_EIR_MAX_SERVICES % BTM_EIR_ARRAY_BITS) ? 1 : 0)) 514 515 /* MACRO to set the service bit mask in a bit stream */ 516 #define BTM_EIR_SET_SERVICE(p, service) (((UINT32 *)(p))[(((UINT32)(service)) / BTM_EIR_ARRAY_BITS)] |= \ 517 ((UINT32)1 << (((UINT32)(service)) % BTM_EIR_ARRAY_BITS))) 518 519 520 /* MACRO to clear the service bit mask in a bit stream */ 521 #define BTM_EIR_CLR_SERVICE(p, service) (((UINT32 *)(p))[(((UINT32)(service)) / BTM_EIR_ARRAY_BITS)] &= \ 522 ~((UINT32)1 << (((UINT32)(service)) % BTM_EIR_ARRAY_BITS))) 523 524 /* MACRO to check the service bit mask in a bit stream */ 525 #define BTM_EIR_HAS_SERVICE(p, service) ((((UINT32 *)(p))[(((UINT32)(service)) / BTM_EIR_ARRAY_BITS)] & \ 526 ((UINT32)1 << (((UINT32)(service)) % BTM_EIR_ARRAY_BITS))) >> (((UINT32)(service)) % BTM_EIR_ARRAY_BITS)) 527 528 /* start of EIR in HCI buffer, 4 bytes = HCI Command(2) + Length(1) + FEC_Req(1) */ 529 #define BTM_HCI_EIR_OFFSET (BT_HDR_SIZE + 4) 530 531 /*************************** 532 ** Device Discovery Types 533 ****************************/ 534 /* Definitions of the parameters passed to BTM_StartInquiry and 535 ** BTM_SetPeriodicInquiryMode. 536 */ 537 typedef struct /* contains the two device class condition fields */ 538 { 539 DEV_CLASS dev_class; 540 DEV_CLASS dev_class_mask; 541 } tBTM_COD_COND; 542 543 544 typedef union /* contains the inquiry filter condition */ 545 { 546 BD_ADDR bdaddr_cond; 547 tBTM_COD_COND cod_cond; 548 } tBTM_INQ_FILT_COND; 549 550 551 typedef struct /* contains the parameters passed to the inquiry functions */ 552 { 553 UINT8 mode; /* general or limited */ 554 UINT8 duration; /* duration of the inquiry (1.28 sec increments) */ 555 UINT8 max_resps; /* maximum number of responses to return */ 556 BOOLEAN report_dup; /* report duplicated inquiry response with higher RSSI value */ 557 UINT8 filter_cond_type; /* new devices, BD ADDR, COD, or No filtering */ 558 tBTM_INQ_FILT_COND filter_cond; /* filter value based on filter cond type */ 559 } tBTM_INQ_PARMS; 560 561 #define BTM_INQ_RESULT_BR 0x01 562 #define BTM_INQ_RESULT_BLE 0x02 563 564 #if (BLE_INCLUDED == TRUE) 565 #define BTM_BLE_EVT_CONN_ADV 0x00 566 #define BTM_BLE_EVT_CONN_DIR_ADV 0x01 567 #define BTM_BLE_EVT_DISC_ADV 0x02 568 #define BTM_BLE_EVT_NON_CONN_ADV 0x03 569 #define BTM_BLE_EVT_SCAN_RSP 0x04 570 typedef UINT8 tBTM_BLE_EVT_TYPE; 571 #endif 572 573 /* These are the fields returned in each device's response to the inquiry. It 574 ** is returned in the results callback if registered. 575 */ 576 typedef struct 577 { 578 UINT16 clock_offset; 579 BD_ADDR remote_bd_addr; 580 DEV_CLASS dev_class; 581 UINT8 page_scan_rep_mode; 582 UINT8 page_scan_per_mode; 583 UINT8 page_scan_mode; 584 INT8 rssi; /* Set to BTM_INQ_RES_IGNORE_RSSI if not valid */ 585 #if (BTM_EIR_CLIENT_INCLUDED == TRUE) 586 UINT32 eir_uuid[BTM_EIR_SERVICE_ARRAY_SIZE]; 587 BOOLEAN eir_complete_list; 588 #endif 589 #if (BLE_INCLUDED == TRUE) 590 tBT_DEVICE_TYPE device_type; 591 UINT8 inq_result_type; 592 UINT8 ble_addr_type; 593 tBTM_BLE_EVT_TYPE ble_evt_type; 594 UINT8 flag; 595 #endif 596 } tBTM_INQ_RESULTS; 597 598 599 /* This is the inquiry response information held in its database by BTM, and available 600 ** to applications via BTM_InqDbRead, BTM_InqDbFirst, and BTM_InqDbNext. 601 */ 602 typedef struct 603 { 604 tBTM_INQ_RESULTS results; 605 606 BOOLEAN appl_knows_rem_name; /* set by application if it knows the remote name of the peer device. 607 This is later used by application to determine if remote name request is 608 required to be done. Having the flag here avoid duplicate store of inquiry results */ 609 610 611 #if (BTM_INQ_GET_REMOTE_NAME == TRUE || BLE_INCLUDED == TRUE) 612 UINT16 remote_name_len; 613 tBTM_BD_NAME remote_name; 614 UINT8 remote_name_state; 615 UINT8 remote_name_type; 616 #endif 617 618 } tBTM_INQ_INFO; 619 620 621 /* Structure returned with inquiry complete callback */ 622 typedef struct 623 { 624 tBTM_STATUS status; 625 UINT8 num_resp; /* Number of results from the current inquiry */ 626 } tBTM_INQUIRY_CMPL; 627 628 629 /* Structure returned with remote name request */ 630 typedef struct 631 { 632 UINT16 status; 633 UINT16 length; 634 BD_NAME remote_bd_name; 635 } tBTM_REMOTE_DEV_NAME; 636 637 typedef struct 638 { 639 UINT8 pcm_intf_rate; /* PCM interface rate: 0: 128kbps, 1: 256 kbps; 640 2:512 bps; 3: 1024kbps; 4: 2048kbps */ 641 UINT8 frame_type; /* frame type: 0: short; 1: long */ 642 UINT8 sync_mode; /* sync mode: 0: slave; 1: master */ 643 UINT8 clock_mode; /* clock mode: 0: slave; 1: master */ 644 645 }tBTM_SCO_PCM_PARAM; 646 647 /**************************************** 648 ** Device Discovery Callback Functions 649 *****************************************/ 650 /* Callback function for asynchronous notifications when the BTM inquiry DB 651 ** changes. First param is inquiry database, second is if added to or removed 652 ** from the inquiry database. 653 */ 654 typedef void (tBTM_INQ_DB_CHANGE_CB) (void *p1, BOOLEAN is_new); 655 656 /* Callback function for notifications when the BTM gets inquiry response. 657 ** First param is inquiry results database, second is pointer of EIR. 658 */ 659 typedef void (tBTM_INQ_RESULTS_CB) (tBTM_INQ_RESULTS *p_inq_results, UINT8 *p_eir); 660 661 /***************************************************************************** 662 ** ACL CHANNEL MANAGEMENT 663 *****************************************************************************/ 664 /****************** 665 ** ACL Constants 666 *******************/ 667 668 /* ACL modes */ 669 #define BTM_ACL_MODE_NORMAL HCI_MODE_ACTIVE 670 #define BTM_ACL_MODE_HOLD HCI_MODE_HOLD 671 #define BTM_ACL_MODE_SNIFF HCI_MODE_SNIFF 672 #define BTM_ACL_MODE_PARK HCI_MODE_PARK 673 674 /* Returned with structure in role switch callback (tBTM_ROLE_SWITCH_CMPL) */ 675 #define BTM_ROLE_MASTER HCI_ROLE_MASTER 676 #define BTM_ROLE_SLAVE HCI_ROLE_SLAVE 677 #define BTM_ROLE_UNDEFINED 0xff /* undefined value (error status) */ 678 679 /* ACL Packet Types */ 680 #define BTM_ACL_PKT_TYPES_MASK_DM1 HCI_PKT_TYPES_MASK_DM1 681 #define BTM_ACL_PKT_TYPES_MASK_DH1 HCI_PKT_TYPES_MASK_DH1 682 #define BTM_ACL_PKT_TYPES_MASK_DM3 HCI_PKT_TYPES_MASK_DM3 683 #define BTM_ACL_PKT_TYPES_MASK_DH3 HCI_PKT_TYPES_MASK_DH3 684 #define BTM_ACL_PKT_TYPES_MASK_DM5 HCI_PKT_TYPES_MASK_DM5 685 #define BTM_ACL_PKT_TYPES_MASK_DH5 HCI_PKT_TYPES_MASK_DH5 686 #define BTM_ACL_PKT_TYPES_MASK_NO_2_DH1 HCI_PKT_TYPES_MASK_NO_2_DH1 687 #define BTM_ACL_PKT_TYPES_MASK_NO_3_DH1 HCI_PKT_TYPES_MASK_NO_3_DH1 688 #define BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 HCI_PKT_TYPES_MASK_NO_2_DH3 689 #define BTM_ACL_PKT_TYPES_MASK_NO_3_DH3 HCI_PKT_TYPES_MASK_NO_3_DH3 690 #define BTM_ACL_PKT_TYPES_MASK_NO_2_DH5 HCI_PKT_TYPES_MASK_NO_2_DH5 691 #define BTM_ACL_PKT_TYPES_MASK_NO_3_DH5 HCI_PKT_TYPES_MASK_NO_3_DH5 692 693 /*************** 694 ** ACL Types 695 ****************/ 696 697 /* Structure returned with link policy information (in tBTM_CMPL_CB callback function) 698 ** in response to BTM_ReadLinkPolicy call. 699 */ 700 typedef struct 701 { 702 tBTM_STATUS status; 703 UINT8 hci_status; 704 BD_ADDR rem_bda; 705 UINT16 settings; 706 } tBTM_LNK_POLICY_RESULTS; 707 708 /* Structure returned with Role Switch information (in tBTM_CMPL_CB callback function) 709 ** in response to BTM_SwitchRole call. 710 */ 711 typedef struct 712 { 713 UINT8 hci_status; /* HCI status returned with the event */ 714 UINT8 role; /* BTM_ROLE_MASTER or BTM_ROLE_SLAVE */ 715 BD_ADDR remote_bd_addr; /* Remote BD addr involved with the switch */ 716 } tBTM_ROLE_SWITCH_CMPL; 717 718 719 /* Structure returned with Change Link Key information (in tBTM_CMPL_CB callback function) 720 ** in response to BTM_ChangeLinkKey call. 721 */ 722 typedef struct 723 { 724 UINT8 hci_status; /* HCI status returned with the event */ 725 BD_ADDR remote_bd_addr; /* Remote BD addr involved with the change link key */ 726 } tBTM_CHANGE_KEY_CMPL; 727 728 729 /* Structure returned with QoS information (in tBTM_CMPL_CB callback function) 730 ** in response to BTM_SetQoS call. 731 */ 732 typedef struct 733 { 734 FLOW_SPEC flow; 735 UINT16 handle; 736 UINT8 status; 737 } tBTM_QOS_SETUP_CMPL; 738 739 740 /* Structure returned with read RSSI event (in tBTM_CMPL_CB callback function) 741 ** in response to BTM_ReadRSSI call. 742 */ 743 typedef struct 744 { 745 tBTM_STATUS status; 746 UINT8 hci_status; 747 INT8 rssi; 748 BD_ADDR rem_bda; 749 } tBTM_RSSI_RESULTS; 750 751 /* Structure returned with read current TX power event (in tBTM_CMPL_CB callback function) 752 ** in response to BTM_ReadTxPower call. 753 */ 754 typedef struct 755 { 756 tBTM_STATUS status; 757 UINT8 hci_status; 758 INT8 tx_power; 759 BD_ADDR rem_bda; 760 } tBTM_TX_POWER_RESULTS; 761 762 /* Structure returned with read link quality event (in tBTM_CMPL_CB callback function) 763 ** in response to BTM_ReadLinkQuality call. 764 */ 765 typedef struct 766 { 767 tBTM_STATUS status; 768 UINT8 hci_status; 769 UINT8 link_quality; 770 BD_ADDR rem_bda; 771 } tBTM_LINK_QUALITY_RESULTS; 772 773 /* Structure returned with read inq tx power quality event (in tBTM_CMPL_CB callback function) 774 ** in response to BTM_ReadInquiryRspTxPower call. 775 */ 776 typedef struct 777 { 778 tBTM_STATUS status; 779 UINT8 hci_status; 780 INT8 tx_power; 781 } tBTM_INQ_TXPWR_RESULTS; 782 783 enum 784 { 785 BTM_BL_CONN_EVT, 786 BTM_BL_DISCN_EVT, 787 BTM_BL_UPDATE_EVT, 788 BTM_BL_ROLE_CHG_EVT, 789 BTM_BL_COLLISION_EVT 790 }; 791 typedef UINT8 tBTM_BL_EVENT; 792 typedef UINT16 tBTM_BL_EVENT_MASK; 793 794 #define BTM_BL_CONN_MASK 0x0001 795 #define BTM_BL_DISCN_MASK 0x0002 796 #define BTM_BL_UPDATE_MASK 0x0004 797 #define BTM_BL_ROLE_CHG_MASK 0x0008 798 799 /* the data type associated with BTM_BL_CONN_EVT */ 800 typedef struct 801 { 802 tBTM_BL_EVENT event; /* The event reported. */ 803 BD_ADDR_PTR p_bda; /* The address of the newly connected device */ 804 DEV_CLASS_PTR p_dc; /* The device class */ 805 BD_NAME_PTR p_bdn; /* The device name */ 806 UINT8 *p_features; /* The remote device's supported features */ 807 } tBTM_BL_CONN_DATA; 808 809 /* the data type associated with BTM_BL_DISCN_EVT */ 810 typedef struct 811 { 812 tBTM_BL_EVENT event; /* The event reported. */ 813 BD_ADDR_PTR p_bda; /* The address of the disconnected device */ 814 } tBTM_BL_DISCN_DATA; 815 816 /* Busy-Level shall have the inquiry_paging mask set when 817 * inquiry/paging is in progress, Else the number of ACL links */ 818 #define BTM_BL_INQUIRY_PAGING_MASK 0x10 819 #define BTM_BL_INQUIRY_STARTED (BTM_BL_INQUIRY_PAGING_MASK | 0x1) 820 #define BTM_BL_INQUIRY_CANCELLED (BTM_BL_INQUIRY_PAGING_MASK | 0x2) 821 #define BTM_BL_INQUIRY_COMPLETE (BTM_BL_INQUIRY_PAGING_MASK | 0x3) 822 #define BTM_BL_PAGING_STARTED (BTM_BL_INQUIRY_PAGING_MASK | 0x4) 823 #define BTM_BL_PAGING_COMPLETE (BTM_BL_INQUIRY_PAGING_MASK | 0x5) 824 /* the data type associated with BTM_BL_UPDATE_EVT */ 825 typedef struct 826 { 827 tBTM_BL_EVENT event; /* The event reported. */ 828 UINT8 busy_level;/* when paging or inquiring, level is as above. 829 * Otherwise, the number of ACL links. */ 830 } tBTM_BL_UPDATE_DATA; 831 832 /* the data type associated with BTM_BL_ROLE_CHG_EVT */ 833 typedef struct 834 { 835 tBTM_BL_EVENT event; /* The event reported. */ 836 BD_ADDR_PTR p_bda; /* The address of the peer connected device */ 837 UINT8 new_role; 838 UINT8 hci_status; /* HCI status returned with the event */ 839 } tBTM_BL_ROLE_CHG_DATA; 840 841 typedef union 842 { 843 tBTM_BL_EVENT event; /* The event reported. */ 844 tBTM_BL_CONN_DATA conn; /* The data associated with BTM_BL_CONN_EVT */ 845 tBTM_BL_DISCN_DATA discn; /* The data associated with BTM_BL_DISCN_EVT */ 846 tBTM_BL_UPDATE_DATA update; /* The data associated with BTM_BL_UPDATE_EVT */ 847 tBTM_BL_ROLE_CHG_DATA role_chg;/*The data associated with BTM_BL_ROLE_CHG_EVT */ 848 } tBTM_BL_EVENT_DATA; 849 850 /* Callback function for notifications when the BTM busy level 851 ** changes. 852 */ 853 typedef void (tBTM_BL_CHANGE_CB) (tBTM_BL_EVENT_DATA *p_data); 854 855 /*************************** 856 ** ACL Callback Functions 857 ****************************/ 858 /* Callback function for notifications when the BTM ACL connection DB 859 ** changes. First param is BD address, second is if added or removed. 860 ** Registered through BTM_AclRegisterForChanges call. 861 */ 862 typedef void (tBTM_ACL_DB_CHANGE_CB) (BD_ADDR p_bda, DEV_CLASS p_dc, 863 BD_NAME p_bdn, BD_FEATURES features, 864 BOOLEAN is_new); 865 866 /***************************************************************************** 867 ** SCO CHANNEL MANAGEMENT 868 *****************************************************************************/ 869 /****************** 870 ** SCO Constants 871 *******************/ 872 873 /* Define an invalid SCO index and an invalid HCI handle */ 874 #define BTM_INVALID_SCO_INDEX 0xFFFF 875 #define BTM_INVALID_HCI_HANDLE 0xFFFF 876 877 /* Define an invalid SCO disconnect reason */ 878 #define BTM_INVALID_SCO_DISC_REASON 0xFFFF 879 880 /* Define SCO packet types used in APIs */ 881 #define BTM_SCO_PKT_TYPES_MASK_HV1 HCI_ESCO_PKT_TYPES_MASK_HV1 882 #define BTM_SCO_PKT_TYPES_MASK_HV2 HCI_ESCO_PKT_TYPES_MASK_HV2 883 #define BTM_SCO_PKT_TYPES_MASK_HV3 HCI_ESCO_PKT_TYPES_MASK_HV3 884 #define BTM_SCO_PKT_TYPES_MASK_EV3 HCI_ESCO_PKT_TYPES_MASK_EV3 885 #define BTM_SCO_PKT_TYPES_MASK_EV4 HCI_ESCO_PKT_TYPES_MASK_EV4 886 #define BTM_SCO_PKT_TYPES_MASK_EV5 HCI_ESCO_PKT_TYPES_MASK_EV5 887 #define BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 HCI_ESCO_PKT_TYPES_MASK_NO_2_EV3 888 #define BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV3 889 #define BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 HCI_ESCO_PKT_TYPES_MASK_NO_2_EV5 890 #define BTM_SCO_PKT_TYPES_MASK_NO_3_EV5 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV5 891 892 #define BTM_SCO_LINK_ONLY_MASK (BTM_SCO_PKT_TYPES_MASK_HV1 | \ 893 BTM_SCO_PKT_TYPES_MASK_HV2 | \ 894 BTM_SCO_PKT_TYPES_MASK_HV3) 895 896 #define BTM_ESCO_LINK_ONLY_MASK (BTM_SCO_PKT_TYPES_MASK_EV3 | \ 897 BTM_SCO_PKT_TYPES_MASK_EV4 | \ 898 BTM_SCO_PKT_TYPES_MASK_EV5) 899 900 #define BTM_SCO_LINK_ALL_PKT_MASK (BTM_SCO_LINK_ONLY_MASK | \ 901 BTM_ESCO_LINK_ONLY_MASK) 902 903 #define BTM_VALID_SCO_ALL_PKT_TYPE HCI_VALID_SCO_ALL_PKT_TYPE 904 905 /* Passed in BTM_CreateSco if the packet type parameter should be ignored */ 906 #define BTM_IGNORE_SCO_PKT_TYPE 0 907 908 /*************** 909 ** SCO Types 910 ****************/ 911 #define BTM_LINK_TYPE_SCO HCI_LINK_TYPE_SCO 912 #define BTM_LINK_TYPE_ESCO HCI_LINK_TYPE_ESCO 913 typedef UINT8 tBTM_SCO_TYPE; 914 915 916 /******************* 917 ** SCO Routing Path 918 ********************/ 919 #define BTM_SCO_ROUTE_PCM HCI_BRCM_SCO_ROUTE_PCM 920 #define BTM_SCO_ROUTE_HCI HCI_BRCM_SCO_ROUTE_HCI 921 typedef UINT8 tBTM_SCO_ROUTE_TYPE; 922 923 924 /******************* 925 ** SCO Codec Types 926 ********************/ 927 #define BTM_SCO_CODEC_NONE 0x0000 928 #define BTM_SCO_CODEC_CVSD 0x0001 929 #define BTM_SCO_CODEC_MSBC 0x0002 930 typedef UINT16 tBTM_SCO_CODEC_TYPE; 931 932 /******************* 933 ** SCO Voice Settings 934 ********************/ 935 #define BTM_VOICE_SETTING_CVSD ((UINT16) (HCI_INP_CODING_LINEAR | \ 936 HCI_INP_DATA_FMT_2S_COMPLEMENT | \ 937 HCI_INP_SAMPLE_SIZE_16BIT | \ 938 HCI_AIR_CODING_FORMAT_CVSD)) 939 940 #define BTM_VOICE_SETTING_TRANS ((UINT16) (HCI_INP_CODING_LINEAR | \ 941 HCI_INP_DATA_FMT_2S_COMPLEMENT | \ 942 HCI_INP_SAMPLE_SIZE_16BIT | \ 943 HCI_AIR_CODING_FORMAT_TRANSPNT)) 944 945 /******************* 946 ** SCO Data Status 947 ********************/ 948 enum 949 { 950 BTM_SCO_DATA_CORRECT, 951 BTM_SCO_DATA_PAR_ERR, 952 BTM_SCO_DATA_NONE, 953 BTM_SCO_DATA_PAR_LOST 954 }; 955 typedef UINT8 tBTM_SCO_DATA_FLAG; 956 957 /*************************** 958 ** SCO Callback Functions 959 ****************************/ 960 typedef void (tBTM_SCO_CB) (UINT16 sco_inx); 961 typedef void (tBTM_SCO_DATA_CB) (UINT16 sco_inx, BT_HDR *p_data, tBTM_SCO_DATA_FLAG status); 962 963 /****************** 964 ** eSCO Constants 965 *******************/ 966 #define BTM_64KBITS_RATE 0x00001f40 /* 64 kbits/sec data rate */ 967 968 /* Retransmission effort */ 969 #define BTM_ESCO_RETRANS_OFF 0 970 #define BTM_ESCO_RETRANS_POWER 1 971 #define BTM_ESCO_RETRANS_QUALITY 2 972 #define BTM_ESCO_RETRANS_DONTCARE 0xff 973 974 /* Max Latency Don't Care */ 975 #define BTM_ESCO_MAX_LAT_DONTCARE 0xffff 976 977 /*************** 978 ** eSCO Types 979 ****************/ 980 /* tBTM_ESCO_CBACK event types */ 981 #define BTM_ESCO_CHG_EVT 1 982 #define BTM_ESCO_CONN_REQ_EVT 2 983 typedef UINT8 tBTM_ESCO_EVT; 984 985 /* Passed into BTM_SetEScoMode() */ 986 typedef struct 987 { 988 UINT32 tx_bw; 989 UINT32 rx_bw; 990 UINT16 max_latency; 991 UINT16 voice_contfmt; /* Voice Settings or Content Format */ 992 UINT16 packet_types; 993 UINT8 retrans_effort; 994 } tBTM_ESCO_PARAMS; 995 996 typedef struct 997 { 998 UINT16 max_latency; 999 UINT16 packet_types; 1000 UINT8 retrans_effort; 1001 } tBTM_CHG_ESCO_PARAMS; 1002 1003 /* Returned by BTM_ReadEScoLinkParms() */ 1004 typedef struct 1005 { 1006 UINT16 rx_pkt_len; 1007 UINT16 tx_pkt_len; 1008 BD_ADDR bd_addr; 1009 UINT8 link_type; /* BTM_LINK_TYPE_SCO or BTM_LINK_TYPE_ESCO */ 1010 UINT8 tx_interval; 1011 UINT8 retrans_window; 1012 UINT8 air_mode; 1013 } tBTM_ESCO_DATA; 1014 1015 typedef struct 1016 { 1017 UINT16 sco_inx; 1018 UINT16 rx_pkt_len; 1019 UINT16 tx_pkt_len; 1020 BD_ADDR bd_addr; 1021 UINT8 hci_status; 1022 UINT8 tx_interval; 1023 UINT8 retrans_window; 1024 } tBTM_CHG_ESCO_EVT_DATA; 1025 1026 typedef struct 1027 { 1028 UINT16 sco_inx; 1029 BD_ADDR bd_addr; 1030 DEV_CLASS dev_class; 1031 tBTM_SCO_TYPE link_type; 1032 } tBTM_ESCO_CONN_REQ_EVT_DATA; 1033 1034 typedef union 1035 { 1036 tBTM_CHG_ESCO_EVT_DATA chg_evt; 1037 tBTM_ESCO_CONN_REQ_EVT_DATA conn_evt; 1038 } tBTM_ESCO_EVT_DATA; 1039 1040 /*************************** 1041 ** eSCO Callback Functions 1042 ****************************/ 1043 typedef void (tBTM_ESCO_CBACK) (tBTM_ESCO_EVT event, tBTM_ESCO_EVT_DATA *p_data); 1044 1045 1046 /***************************************************************************** 1047 ** SECURITY MANAGEMENT 1048 *****************************************************************************/ 1049 /******************************* 1050 ** Security Manager Constants 1051 ********************************/ 1052 1053 /* Security Mode (BTM_SetSecurityMode) */ 1054 #define BTM_SEC_MODE_UNDEFINED 0 1055 #define BTM_SEC_MODE_NONE 1 1056 #define BTM_SEC_MODE_SERVICE 2 1057 #define BTM_SEC_MODE_LINK 3 1058 #define BTM_SEC_MODE_SP 4 1059 #define BTM_SEC_MODE_SP_DEBUG 5 1060 1061 /* Security Service Levels [bit mask] (BTM_SetSecurityLevel) 1062 ** Encryption should not be used without authentication 1063 */ 1064 #define BTM_SEC_NONE 0x0000 /* Nothing required */ 1065 #define BTM_SEC_IN_AUTHORIZE 0x0001 /* Inbound call requires authorization */ 1066 #define BTM_SEC_IN_AUTHENTICATE 0x0002 /* Inbound call requires authentication */ 1067 #define BTM_SEC_IN_ENCRYPT 0x0004 /* Inbound call requires encryption */ 1068 #define BTM_SEC_OUT_AUTHORIZE 0x0008 /* Outbound call requires authorization */ 1069 #define BTM_SEC_OUT_AUTHENTICATE 0x0010 /* Outbound call requires authentication */ 1070 #define BTM_SEC_OUT_ENCRYPT 0x0020 /* Outbound call requires encryption */ 1071 #define BTM_SEC_BOND 0x0040 /* Bonding */ 1072 #define BTM_SEC_BOND_CONN 0x0080 /* bond_created_connection */ 1073 #define BTM_SEC_FORCE_MASTER 0x0100 /* Need to switch connection to be master */ 1074 #define BTM_SEC_ATTEMPT_MASTER 0x0200 /* Try to switch connection to be master */ 1075 #define BTM_SEC_FORCE_SLAVE 0x0400 /* Need to switch connection to be master */ 1076 #define BTM_SEC_ATTEMPT_SLAVE 0x0800 /* Try to switch connection to be slave */ 1077 #define BTM_SEC_IN_MITM 0x1000 /* inbound Do man in the middle protection */ 1078 #define BTM_SEC_OUT_MITM 0x2000 /* outbound Do man in the middle protection */ 1079 1080 /* Security Flags [bit mask] (BTM_GetSecurityFlags) 1081 */ 1082 #define BTM_SEC_FLAG_AUTHORIZED 0x01 1083 #define BTM_SEC_FLAG_AUTHENTICATED 0x02 1084 #define BTM_SEC_FLAG_ENCRYPTED 0x04 1085 #define BTM_SEC_FLAG_LKEY_KNOWN 0x10 1086 #define BTM_SEC_FLAG_LKEY_AUTHED 0x20 1087 1088 /* PIN types */ 1089 #define BTM_PIN_TYPE_VARIABLE HCI_PIN_TYPE_VARIABLE 1090 #define BTM_PIN_TYPE_FIXED HCI_PIN_TYPE_FIXED 1091 1092 /* Link Key types used to generate the new link key. 1093 ** returned in link key notification callback function 1094 */ 1095 #define BTM_LKEY_TYPE_COMBINATION HCI_LKEY_TYPE_COMBINATION 1096 #define BTM_LKEY_TYPE_LOCAL_UNIT HCI_LKEY_TYPE_LOCAL_UNIT 1097 #define BTM_LKEY_TYPE_REMOTE_UNIT HCI_LKEY_TYPE_REMOTE_UNIT 1098 #define BTM_LKEY_TYPE_DEBUG_COMB HCI_LKEY_TYPE_DEBUG_COMB 1099 #define BTM_LKEY_TYPE_UNAUTH_COMB HCI_LKEY_TYPE_UNAUTH_COMB 1100 #define BTM_LKEY_TYPE_AUTH_COMB HCI_LKEY_TYPE_AUTH_COMB 1101 #define BTM_LKEY_TYPE_CHANGED_COMB HCI_LKEY_TYPE_CHANGED_COMB 1102 #define BTM_LKEY_TYPE_IGNORE 0xff /* used when event is response from 1103 hci return link keys request */ 1104 1105 /* Protocol level security (BTM_SetSecurityLevel) */ 1106 #define BTM_SEC_PROTO_L2CAP 0 1107 #define BTM_SEC_PROTO_SDP 1 1108 #define BTM_SEC_PROTO_TCS 2 1109 #define BTM_SEC_PROTO_RFCOMM 3 1110 #define BTM_SEC_PROTO_OBEX 4 1111 #define BTM_SEC_PROTO_BNEP 5 1112 #define BTM_SEC_PROTO_HID 6 /* HID */ 1113 #define BTM_SEC_PROTO_AVDT 7 1114 #define BTM_SEC_PROTO_MCA 8 1115 1116 /* Determine the number of UINT32's necessary for security services */ 1117 #define BTM_SEC_ARRAY_BITS 32 /* Number of bits in each array element */ 1118 #define BTM_SEC_SERVICE_ARRAY_SIZE (((UINT32)BTM_SEC_MAX_SERVICES / BTM_SEC_ARRAY_BITS) + \ 1119 (((UINT32)BTM_SEC_MAX_SERVICES % BTM_SEC_ARRAY_BITS) ? 1 : 0)) 1120 1121 /* Security service definitions (BTM_SetSecurityLevel) 1122 ** Used for Authorization APIs 1123 */ 1124 #define BTM_SEC_SERVICE_SDP_SERVER 0 1125 #define BTM_SEC_SERVICE_SERIAL_PORT 1 1126 #define BTM_SEC_SERVICE_LAN_ACCESS 2 1127 #define BTM_SEC_SERVICE_DUN 3 1128 #define BTM_SEC_SERVICE_IRMC_SYNC 4 1129 #define BTM_SEC_SERVICE_IRMC_SYNC_CMD 5 1130 #define BTM_SEC_SERVICE_OBEX 6 1131 #define BTM_SEC_SERVICE_OBEX_FTP 7 1132 #define BTM_SEC_SERVICE_HEADSET 8 1133 #define BTM_SEC_SERVICE_CORDLESS 9 1134 #define BTM_SEC_SERVICE_INTERCOM 10 1135 #define BTM_SEC_SERVICE_FAX 11 1136 #define BTM_SEC_SERVICE_HEADSET_AG 12 1137 #define BTM_SEC_SERVICE_PNP_INFO 13 1138 #define BTM_SEC_SERVICE_GEN_NET 14 1139 #define BTM_SEC_SERVICE_GEN_FILE 15 1140 #define BTM_SEC_SERVICE_GEN_AUDIO 16 1141 #define BTM_SEC_SERVICE_GEN_TEL 17 1142 #define BTM_SEC_SERVICE_CTP_DATA 18 1143 #define BTM_SEC_SERVICE_HCRP_CTRL 19 1144 #define BTM_SEC_SERVICE_HCRP_DATA 20 1145 #define BTM_SEC_SERVICE_HCRP_NOTIF 21 1146 #define BTM_SEC_SERVICE_BPP_JOB 22 1147 #define BTM_SEC_SERVICE_BPP_STATUS 23 1148 #define BTM_SEC_SERVICE_BPP_REF 24 1149 #define BTM_SEC_SERVICE_BNEP_PANU 25 1150 #define BTM_SEC_SERVICE_BNEP_GN 26 1151 #define BTM_SEC_SERVICE_BNEP_NAP 27 1152 #define BTM_SEC_SERVICE_HF_HANDSFREE 28 1153 #define BTM_SEC_SERVICE_AG_HANDSFREE 29 1154 #define BTM_SEC_SERVICE_TE_PHONE_ACCESS 30 1155 #define BTM_SEC_SERVICE_ME_PHONE_ACCESS 31 1156 1157 #define BTM_SEC_SERVICE_HID_SEC_CTRL 32 1158 #define BTM_SEC_SERVICE_HID_NOSEC_CTRL 33 1159 #define BTM_SEC_SERVICE_HID_INTR 34 1160 #define BTM_SEC_SERVICE_BIP 35 1161 #define BTM_SEC_SERVICE_BIP_REF 36 1162 #define BTM_SEC_SERVICE_AVDTP 37 1163 #define BTM_SEC_SERVICE_AVDTP_NOSEC 38 1164 #define BTM_SEC_SERVICE_AVCTP 39 1165 #define BTM_SEC_SERVICE_SAP 40 1166 #define BTM_SEC_SERVICE_PBAP 41 1167 #define BTM_SEC_SERVICE_RFC_MUX 42 1168 #define BTM_SEC_SERVICE_AVCTP_BROWSE 43 1169 #define BTM_SEC_SERVICE_MAP 44 1170 #define BTM_SEC_SERVICE_MAP_NOTIF 45 1171 #define BTM_SEC_SERVICE_MCAP_CTRL 46 1172 #define BTM_SEC_SERVICE_MCAP_DATA 47 1173 #define BTM_SEC_SERVICE_HDP_SNK 48 1174 #define BTM_SEC_SERVICE_HDP_SRC 49 1175 #define BTM_SEC_SERVICE_ATT 50 1176 1177 /* Update these as services are added */ 1178 #define BTM_SEC_SERVICE_FIRST_EMPTY 51 1179 1180 #ifndef BTM_SEC_MAX_SERVICES 1181 #define BTM_SEC_MAX_SERVICES 65 1182 #endif 1183 1184 /************************************************************************************************ 1185 ** Security Services MACROS handle array of UINT32 bits for more than 32 trusted services 1186 *************************************************************************************************/ 1187 /* MACRO to set the security service bit mask in a bit stream */ 1188 #define BTM_SEC_SET_SERVICE(p, service) (((UINT32 *)(p))[(((UINT32)(service)) / BTM_SEC_ARRAY_BITS)] |= \ 1189 ((UINT32)1 << (((UINT32)(service)) % BTM_SEC_ARRAY_BITS))) 1190 1191 1192 /* MACRO to clear the security service bit mask in a bit stream */ 1193 #define BTM_SEC_CLR_SERVICE(p, service) (((UINT32 *)(p))[(((UINT32)(service)) / BTM_SEC_ARRAY_BITS)] &= \ 1194 ~((UINT32)1 << (((UINT32)(service)) % BTM_SEC_ARRAY_BITS))) 1195 1196 /* MACRO to check the security service bit mask in a bit stream (Returns TRUE or FALSE) */ 1197 #define BTM_SEC_IS_SERVICE_TRUSTED(p, service) (((((UINT32 *)(p))[(((UINT32)(service)) / BTM_SEC_ARRAY_BITS)]) & \ 1198 (UINT32)(((UINT32)1 << (((UINT32)(service)) % BTM_SEC_ARRAY_BITS)))) ? TRUE : FALSE) 1199 1200 /* MACRO to copy two trusted device bitmask */ 1201 #define BTM_SEC_COPY_TRUSTED_DEVICE(p_src, p_dst) {int trst; for (trst = 0; trst < BTM_SEC_SERVICE_ARRAY_SIZE; trst++) \ 1202 ((UINT32 *)(p_dst))[trst] = ((UINT32 *)(p_src))[trst];} 1203 1204 /* MACRO to clear two trusted device bitmask */ 1205 #define BTM_SEC_CLR_TRUSTED_DEVICE(p_dst) {int trst; for (trst = 0; trst < BTM_SEC_SERVICE_ARRAY_SIZE; trst++) \ 1206 ((UINT32 *)(p_dst))[trst] = 0;} 1207 1208 /* Following bits can be provided by host in the trusted_mask array */ 1209 /* 0..31 bits of mask[0] (Least Significant Word) */ 1210 #define BTM_SEC_TRUST_SDP_SERVER (1 << BTM_SEC_SERVICE_SDP_SERVER) 1211 #define BTM_SEC_TRUST_SERIAL_PORT (1 << BTM_SEC_SERVICE_SERIAL_PORT) 1212 #define BTM_SEC_TRUST_LAN_ACCESS (1 << BTM_SEC_SERVICE_LAN_ACCESS) 1213 #define BTM_SEC_TRUST_DUN (1 << BTM_SEC_SERVICE_DUN) 1214 #define BTM_SEC_TRUST_IRMC_SYNC (1 << BTM_SEC_SERVICE_IRMC_SYNC) 1215 #define BTM_SEC_TRUST_IRMC_SYNC_CMD (1 << BTM_SEC_SERVICE_IRMC_SYNC_CMD) 1216 #define BTM_SEC_TRUST_OBEX (1 << BTM_SEC_SERVICE_OBEX) 1217 #define BTM_SEC_TRUST_OBEX_FTP (1 << BTM_SEC_SERVICE_OBEX_FTP) 1218 #define BTM_SEC_TRUST_HEADSET (1 << BTM_SEC_SERVICE_HEADSET) 1219 #define BTM_SEC_TRUST_CORDLESS (1 << BTM_SEC_SERVICE_CORDLESS) 1220 #define BTM_SEC_TRUST_INTERCOM (1 << BTM_SEC_SERVICE_INTERCOM) 1221 #define BTM_SEC_TRUST_FAX (1 << BTM_SEC_SERVICE_FAX) 1222 #define BTM_SEC_TRUST_HEADSET_AG (1 << BTM_SEC_SERVICE_HEADSET_AG) 1223 #define BTM_SEC_TRUST_PNP_INFO (1 << BTM_SEC_SERVICE_PNP_INFO) 1224 #define BTM_SEC_TRUST_GEN_NET (1 << BTM_SEC_SERVICE_GEN_NET) 1225 #define BTM_SEC_TRUST_GEN_FILE (1 << BTM_SEC_SERVICE_GEN_FILE) 1226 #define BTM_SEC_TRUST_GEN_AUDIO (1 << BTM_SEC_SERVICE_GEN_AUDIO) 1227 #define BTM_SEC_TRUST_GEN_TEL (1 << BTM_SEC_SERVICE_GEN_TEL) 1228 #define BTM_SEC_TRUST_CTP_DATA (1 << BTM_SEC_SERVICE_CTP_DATA) 1229 #define BTM_SEC_TRUST_HCRP_CTRL (1 << BTM_SEC_SERVICE_HCRP_CTRL) 1230 #define BTM_SEC_TRUST_HCRP_DATA (1 << BTM_SEC_SERVICE_HCRP_DATA) 1231 #define BTM_SEC_TRUST_HCRP_NOTIF (1 << BTM_SEC_SERVICE_HCRP_NOTIF) 1232 #define BTM_SEC_TRUST_BPP_JOB (1 << BTM_SEC_SERVICE_JOB) 1233 #define BTM_SEC_TRUST_BPP_STATUS (1 << BTM_SEC_SERVICE_STATUS) 1234 #define BTM_SEC_TRUST_BPP_REF (1 << BTM_SEC_SERVICE_REF) 1235 #define BTM_SEC_TRUST_BNEP_PANU (1 << BTM_SEC_SERVICE_BNEP_PANU) 1236 #define BTM_SEC_TRUST_BNEP_GN (1 << BTM_SEC_SERVICE_BNEP_GN) 1237 #define BTM_SEC_TRUST_BNEP_NAP (1 << BTM_SEC_SERVICE_BNEP_NAP) 1238 #define BTM_SEC_TRUST_HFP_HF (1 << BTM_SEC_SERVICE_HF_HANDSFREE) 1239 #define BTM_SEC_TRUST_HFP_AG (1 << BTM_SEC_SERVICE_AG_HANDSFREE) 1240 #define BTM_SEC_TRUST_TE_PHONE_ACCESS (1 << BTM_SEC_SERVICE_TE_PHONE_ACCESS) 1241 #define BTM_SEC_TRUST_ME_PHONE_ACCESS (1 << BTM_SEC_SERVICE_ME_PHONE_ACCESS) 1242 1243 /* 0..31 bits of mask[1] (Most Significant Word) */ 1244 #define BTM_SEC_TRUST_HID_CTRL (1 << (BTM_SEC_SERVICE_HID_SEC_CTRL - 32)) 1245 #define BTM_SEC_TRUST_HID_NOSEC_CTRL (1 << (BTM_SEC_SERVICE_HID_NOSEC_CTRL - 32)) 1246 #define BTM_SEC_TRUST_HID_INTR (1 << (BTM_SEC_SERVICE_HID_INTR - 32)) 1247 #define BTM_SEC_TRUST_BIP (1 << (BTM_SEC_SERVICE_BIP - 32)) 1248 #define BTM_SEC_TRUST_BIP_REF (1 << (BTM_SEC_SERVICE_BIP_REF - 32)) 1249 #define BTM_SEC_TRUST_AVDTP (1 << (BTM_SEC_SERVICE_AVDTP - 32)) 1250 #define BTM_SEC_TRUST_AVDTP_NOSEC (1 << (BTM_SEC_SERVICE_AVDTP_NOSEC - 32)) 1251 #define BTM_SEC_TRUST_AVCTP (1 << (BTM_SEC_SERVICE_AVCTP - 32)) 1252 #define BTM_SEC_TRUST_SAP (1 << (BTM_SEC_SERVICE_SAP - 32)) 1253 #define BTM_SEC_TRUST_PBAP (1 << (BTM_SEC_SERVICE_PBAP - 32)) 1254 #define BTM_SEC_TRUST_RFC_MUX (1 << (BTM_SEC_SERVICE_RFC_MUX - 32)) 1255 #define BTM_SEC_TRUST_AVCTP_BROWSE (1 << (BTM_SEC_SERVICE_AVCTP_BROWSE - 32)) 1256 #define BTM_SEC_TRUST_MAP (1 << (BTM_SEC_SERVICE_MAP - 32)) 1257 #define BTM_SEC_TRUST_MAP_NOTIF (1 << (BTM_SEC_SERVICE_MAP_NOTIF - 32)) 1258 #define BTM_SEC_TRUST_MCAP_CTRL (1 << (BTM_SEC_SERVICE_MCAP_CTRL - 32)) 1259 #define BTM_SEC_TRUST_MCAP_DATA (1 << (BTM_SEC_SERVICE_MCAP_DATA - 32)) 1260 #define BTM_SEC_TRUST_HDP_SNK (1 << (BTM_SEC_SERVICE_HDP_SNK - 32)) 1261 #define BTM_SEC_TRUST_HDP_SRC (1 << (BTM_SEC_SERVICE_HDP_SRC - 32)) 1262 1263 #define BTM_SEC_TRUST_ALL 0xFFFFFFFF /* for each array element */ 1264 1265 /**************************************** 1266 ** Security Manager Callback Functions 1267 *****************************************/ 1268 /* Authorize device for service. Parameters are 1269 ** BD Address of remote 1270 ** Device Class of remote 1271 ** BD Name of remote 1272 ** Service name 1273 ** Service Id (NULL - unknown service or unused 1274 ** [BTM_SEC_SERVICE_NAME_LEN set to 0]) 1275 ** Is originator of the connection 1276 ** Result of the operation 1277 */ 1278 typedef UINT8 (tBTM_AUTHORIZE_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class, 1279 tBTM_BD_NAME bd_name, UINT8 *service_name, 1280 UINT8 service_id, BOOLEAN is_originator); 1281 1282 /* Get PIN for the connection. Parameters are 1283 ** BD Address of remote 1284 ** Device Class of remote 1285 ** BD Name of remote 1286 */ 1287 typedef UINT8 (tBTM_PIN_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class, 1288 tBTM_BD_NAME bd_name); 1289 1290 1291 /* Get Link Key for the connection. Parameters are 1292 ** BD Address of remote 1293 ** Link Key 1294 */ 1295 typedef UINT8 (tBTM_LINK_KEY_REQ_CALLBACK) (BD_ADDR bd_addr, LINK_KEY key); 1296 1297 /* New Link Key for the connection. Parameters are 1298 ** BD Address of remote 1299 ** Link Key 1300 ** Key Type: Combination, Local Unit, or Remote Unit 1301 */ 1302 typedef UINT8 (tBTM_LINK_KEY_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class, 1303 tBTM_BD_NAME bd_name, UINT8 *key, 1304 UINT8 key_type); 1305 1306 1307 /* Remote Name Resolved. Parameters are 1308 ** BD Address of remote 1309 ** BD Name of remote 1310 */ 1311 typedef void (tBTM_RMT_NAME_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dc, 1312 tBTM_BD_NAME bd_name); 1313 1314 1315 /* Authentication complete for the connection. Parameters are 1316 ** BD Address of remote 1317 ** Device Class of remote 1318 ** BD Name of remote 1319 ** 1320 */ 1321 typedef UINT8 (tBTM_AUTH_COMPLETE_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class, 1322 tBTM_BD_NAME bd_name, int result); 1323 1324 /* Operation abort. Called by the stack when link goes down during. Pin code 1325 ** request or authorization. Parameters are 1326 ** BD Address of remote 1327 ** 1328 */ 1329 typedef UINT8 (tBTM_ABORT_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class, 1330 tBTM_BD_NAME bd_name); 1331 1332 enum 1333 { 1334 BTM_SP_IO_REQ_EVT, /* received IO_CAPABILITY_REQUEST event */ 1335 BTM_SP_IO_RSP_EVT, /* received IO_CAPABILITY_RESPONSE event */ 1336 BTM_SP_CFM_REQ_EVT, /* received USER_CONFIRMATION_REQUEST event */ 1337 BTM_SP_KEY_NOTIF_EVT, /* received USER_PASSKEY_NOTIFY event */ 1338 BTM_SP_KEY_REQ_EVT, /* received USER_PASSKEY_REQUEST event */ 1339 BTM_SP_KEYPRESS_EVT, /* received KEYPRESS_NOTIFY event */ 1340 BTM_SP_LOC_OOB_EVT, /* received result for READ_LOCAL_OOB_DATA command */ 1341 BTM_SP_RMT_OOB_EVT, /* received REMOTE_OOB_DATA_REQUEST event */ 1342 BTM_SP_COMPLT_EVT, /* received SIMPLE_PAIRING_COMPLETE event */ 1343 BTM_SP_UPGRADE_EVT /* check if the application wants to upgrade the link key */ 1344 }; 1345 typedef UINT8 tBTM_SP_EVT; 1346 1347 #define BTM_IO_CAP_OUT 0 /* DisplayOnly */ 1348 #define BTM_IO_CAP_IO 1 /* DisplayYesNo */ 1349 #define BTM_IO_CAP_IN 2 /* KeyboardOnly */ 1350 #define BTM_IO_CAP_NONE 3 /* NoInputNoOutput */ 1351 #if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE 1352 #define BTM_IO_CAP_KBDISP 4 /* Keyboard display */ 1353 #define BTM_IO_CAP_MAX 5 1354 #else 1355 #define BTM_IO_CAP_MAX 4 1356 #endif 1357 1358 typedef UINT8 tBTM_IO_CAP; 1359 1360 #define BTM_MAX_PASSKEY_VAL (999999) 1361 #define BTM_MIN_PASSKEY_VAL (0) 1362 1363 #define BTM_AUTH_SP_NO 0 /* MITM Protection Not Required - Single Profile/non-bonding 1364 Numeric comparison with automatic accept allowed */ 1365 #define BTM_AUTH_SP_YES 1 /* MITM Protection Required - Single Profile/non-bonding 1366 Use IO Capabilities to determine authentication procedure */ 1367 #define BTM_AUTH_AP_NO 2 /* MITM Protection Not Required - All Profiles/dedicated bonding 1368 Numeric comparison with automatic accept allowed */ 1369 #define BTM_AUTH_AP_YES 3 /* MITM Protection Required - All Profiles/dedicated bonding 1370 Use IO Capabilities to determine authentication procedure */ 1371 #define BTM_AUTH_SPGB_NO 4 /* MITM Protection Not Required - Single Profiles/general bonding 1372 Numeric comparison with automatic accept allowed */ 1373 #define BTM_AUTH_SPGB_YES 5 /* MITM Protection Required - Single Profiles/general bonding 1374 Use IO Capabilities to determine authentication procedure */ 1375 #define BTM_AUTH_DD_BOND 2 /* this bit is ORed to the BTM_AUTH_SP_* when IO exchange for dedicated bonding */ 1376 #define BTM_AUTH_GB_BIT 4 /* the genernal bonding bit */ 1377 #define BTM_AUTH_BONDS 6 /* the general/dedicated bonding bits */ 1378 #define BTM_AUTH_YN_BIT 1 /* this is the Yes or No bit */ 1379 1380 typedef UINT8 tBTM_AUTH_REQ; 1381 1382 enum 1383 { 1384 BTM_OOB_NONE, 1385 BTM_OOB_PRESENT 1386 #if BTM_OOB_INCLUDED == TRUE 1387 ,BTM_OOB_UNKNOWN 1388 #endif 1389 }; 1390 typedef UINT8 tBTM_OOB_DATA; 1391 1392 /* data type for BTM_SP_IO_REQ_EVT */ 1393 typedef struct 1394 { 1395 BD_ADDR bd_addr; /* peer address */ 1396 tBTM_IO_CAP io_cap; /* local IO capabilities */ 1397 tBTM_OOB_DATA oob_data; /* OOB data present (locally) for the peer device */ 1398 tBTM_AUTH_REQ auth_req; /* Authentication required (for local device) */ 1399 BOOLEAN is_orig; /* TRUE, if local device initiated the SP process */ 1400 } tBTM_SP_IO_REQ; 1401 1402 /* data type for BTM_SP_IO_RSP_EVT */ 1403 typedef struct 1404 { 1405 BD_ADDR bd_addr; /* peer address */ 1406 tBTM_IO_CAP io_cap; /* peer IO capabilities */ 1407 tBTM_OOB_DATA oob_data; /* OOB data present at peer device for the local device */ 1408 tBTM_AUTH_REQ auth_req; /* Authentication required for peer device */ 1409 } tBTM_SP_IO_RSP; 1410 1411 /* data type for BTM_SP_CFM_REQ_EVT */ 1412 typedef struct 1413 { 1414 BD_ADDR bd_addr; /* peer address */ 1415 DEV_CLASS dev_class; /* peer CoD */ 1416 tBTM_BD_NAME bd_name; /* peer device name */ 1417 UINT32 num_val; /* the numeric value for comparison. If just_works, do not show this number to UI */ 1418 BOOLEAN just_works; /* TRUE, if "Just Works" association model */ 1419 tBTM_AUTH_REQ loc_auth_req; /* Authentication required for local device */ 1420 tBTM_AUTH_REQ rmt_auth_req; /* Authentication required for peer device */ 1421 tBTM_IO_CAP loc_io_caps; /* IO Capabilities of the local device */ 1422 tBTM_IO_CAP rmt_io_caps; /* IO Capabilities of the remot device */ 1423 } tBTM_SP_CFM_REQ; 1424 1425 /* data type for BTM_SP_KEY_REQ_EVT */ 1426 typedef struct 1427 { 1428 BD_ADDR bd_addr; /* peer address */ 1429 DEV_CLASS dev_class; /* peer CoD */ 1430 tBTM_BD_NAME bd_name; /* peer device name */ 1431 } tBTM_SP_KEY_REQ; 1432 1433 /* data type for BTM_SP_KEY_NOTIF_EVT */ 1434 typedef struct 1435 { 1436 BD_ADDR bd_addr; /* peer address */ 1437 DEV_CLASS dev_class; /* peer CoD */ 1438 tBTM_BD_NAME bd_name; /* peer device name */ 1439 UINT32 passkey; /* passkey */ 1440 } tBTM_SP_KEY_NOTIF; 1441 1442 enum 1443 { 1444 BTM_SP_KEY_STARTED, /* passkey entry started */ 1445 BTM_SP_KEY_ENTERED, /* passkey digit entered */ 1446 BTM_SP_KEY_ERASED, /* passkey digit erased */ 1447 BTM_SP_KEY_CLEARED, /* passkey cleared */ 1448 BTM_SP_KEY_COMPLT /* passkey entry completed */ 1449 }; 1450 typedef UINT8 tBTM_SP_KEY_TYPE; 1451 1452 /* data type for BTM_SP_KEYPRESS_EVT */ 1453 typedef struct 1454 { 1455 BD_ADDR bd_addr; /* peer address */ 1456 tBTM_SP_KEY_TYPE notif_type; 1457 } tBTM_SP_KEYPRESS; 1458 1459 /* data type for BTM_SP_LOC_OOB_EVT */ 1460 typedef struct 1461 { 1462 tBTM_STATUS status; /* */ 1463 BT_OCTET16 c; /* Simple Pairing Hash C */ 1464 BT_OCTET16 r; /* Simple Pairing Randomnizer R */ 1465 } tBTM_SP_LOC_OOB; 1466 1467 /* data type for BTM_SP_RMT_OOB_EVT */ 1468 typedef struct 1469 { 1470 BD_ADDR bd_addr; /* peer address */ 1471 DEV_CLASS dev_class; /* peer CoD */ 1472 tBTM_BD_NAME bd_name; /* peer device name */ 1473 } tBTM_SP_RMT_OOB; 1474 1475 1476 /* data type for BTM_SP_COMPLT_EVT */ 1477 typedef struct 1478 { 1479 BD_ADDR bd_addr; /* peer address */ 1480 DEV_CLASS dev_class; /* peer CoD */ 1481 tBTM_BD_NAME bd_name; /* peer device name */ 1482 tBTM_STATUS status; /* status of the simple pairing process */ 1483 } tBTM_SP_COMPLT; 1484 1485 /* data type for BTM_SP_UPGRADE_EVT */ 1486 typedef struct 1487 { 1488 BD_ADDR bd_addr; /* peer address */ 1489 BOOLEAN upgrade; /* TRUE, to upgrade the link key */ 1490 } tBTM_SP_UPGRADE; 1491 1492 typedef union 1493 { 1494 tBTM_SP_IO_REQ io_req; /* BTM_SP_IO_REQ_EVT */ 1495 tBTM_SP_IO_RSP io_rsp; /* BTM_SP_IO_RSP_EVT */ 1496 tBTM_SP_CFM_REQ cfm_req; /* BTM_SP_CFM_REQ_EVT */ 1497 tBTM_SP_KEY_NOTIF key_notif; /* BTM_SP_KEY_NOTIF_EVT */ 1498 tBTM_SP_KEY_REQ key_req; /* BTM_SP_KEY_REQ_EVT */ 1499 tBTM_SP_KEYPRESS key_press; /* BTM_SP_KEYPRESS_EVT */ 1500 tBTM_SP_LOC_OOB loc_oob; /* BTM_SP_LOC_OOB_EVT */ 1501 tBTM_SP_RMT_OOB rmt_oob; /* BTM_SP_RMT_OOB_EVT */ 1502 tBTM_SP_COMPLT complt; /* BTM_SP_COMPLT_EVT */ 1503 tBTM_SP_UPGRADE upgrade; /* BTM_SP_UPGRADE_EVT */ 1504 } tBTM_SP_EVT_DATA; 1505 1506 /* Simple Pairing Events. Called by the stack when Simple Pairing related 1507 ** events occur. 1508 */ 1509 typedef UINT8 (tBTM_SP_CALLBACK) (tBTM_SP_EVT event, tBTM_SP_EVT_DATA *p_data); 1510 1511 1512 typedef void (tBTM_MKEY_CALLBACK) (BD_ADDR bd_addr, UINT8 status, UINT8 key_flag) ; 1513 1514 /* Encryption enabled/disabled complete: Optionally passed with BTM_SetEncryption. 1515 ** Parameters are 1516 ** BD Address of remote 1517 ** optional data passed in by BTM_SetEncryption 1518 ** tBTM_STATUS - result of the operation 1519 */ 1520 typedef void (tBTM_SEC_CBACK) (BD_ADDR bd_addr, void *p_ref_data, tBTM_STATUS result); 1521 1522 /* Bond Cancel complete. Parameters are 1523 ** Result of the cancel operation 1524 ** 1525 */ 1526 typedef void (tBTM_BOND_CANCEL_CMPL_CALLBACK) (tBTM_STATUS result); 1527 1528 /* LE related event and data structure 1529 */ 1530 enum 1531 { 1532 BTM_LE_IO_REQ_EVT = 1, /* received IO_CAPABILITY_REQUEST event */ 1533 BTM_LE_SEC_REQUEST_EVT, /* security request event */ 1534 BTM_LE_KEY_NOTIF_EVT, /* received USER_PASSKEY_NOTIFY event */ 1535 BTM_LE_KEY_REQ_EVT, /* received USER_PASSKEY_REQUEST event */ 1536 BTM_LE_OOB_REQ_EVT, /* OOB data request event */ 1537 BTM_LE_COMPLT_EVT, /* received SIMPLE_PAIRING_COMPLETE event */ 1538 BTM_LE_KEY_EVT /* KEY update event */ 1539 }; 1540 typedef UINT8 tBTM_LE_EVT; 1541 1542 #define BTM_LE_KEY_PENC SMP_SEC_KEY_TYPE_ENC /* encryption information of peer device */ 1543 #define BTM_LE_KEY_PID SMP_SEC_KEY_TYPE_ID /* identity key of the peer device */ 1544 #define BTM_LE_KEY_PCSRK SMP_SEC_KEY_TYPE_CSRK /* peer SRK */ 1545 #define BTM_LE_KEY_LENC (SMP_SEC_KEY_TYPE_ENC << 3) /* master role security information:div */ 1546 #define BTM_LE_KEY_LID (SMP_SEC_KEY_TYPE_ID << 3) /* master device ID key */ 1547 #define BTM_LE_KEY_LCSRK (SMP_SEC_KEY_TYPE_CSRK << 3) /* local CSRK has been deliver to peer */ 1548 typedef UINT8 tBTM_LE_KEY_TYPE; 1549 1550 #define BTM_LE_AUTH_REQ_NO_BOND SMP_AUTH_NO_BOND /* 0 */ 1551 #define BTM_LE_AUTH_REQ_BOND SMP_AUTH_GEN_BOND /* 1 << 0 */ 1552 #define BTM_LE_AUTH_REQ_MITM SMP_AUTH_YN_BIT /* 1 << 2 */ 1553 typedef UINT8 tBTM_LE_AUTH_REQ; 1554 1555 #define BTM_LE_AUTH_REQ_MASK SMP_AUTH_MASK /* 0x03*/ 1556 1557 /* LE security level */ 1558 #define BTM_LE_SEC_NONE SMP_SEC_NONE 1559 #define BTM_LE_SEC_UNAUTHENTICATE SMP_SEC_UNAUTHENTICATE 1560 #define BTM_LE_SEC_AUTHENTICATED SMP_SEC_AUTHENTICATED 1561 typedef UINT8 tBTM_LE_SEC; 1562 1563 1564 typedef struct 1565 { 1566 tBTM_IO_CAP io_cap; /* local IO capabilities */ 1567 UINT8 oob_data; /* OOB data present (locally) for the peer device */ 1568 tBTM_LE_AUTH_REQ auth_req; /* Authentication request (for local device) contain bonding and MITM info */ 1569 UINT8 max_key_size; /* max encryption key size */ 1570 tBTM_LE_KEY_TYPE init_keys; /* keys to be distributed, bit mask */ 1571 tBTM_LE_KEY_TYPE resp_keys; /* keys to be distributed, bit mask */ 1572 } tBTM_LE_IO_REQ; 1573 1574 #if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE 1575 /* data type for tBTM_LE_COMPLT */ 1576 typedef struct 1577 { 1578 UINT8 reason; 1579 UINT8 sec_level; 1580 }tBTM_LE_COMPLT; 1581 #endif 1582 1583 /* BLE encryption keys */ 1584 typedef struct 1585 { 1586 BT_OCTET16 ltk; 1587 BT_OCTET8 rand; 1588 UINT16 ediv; 1589 UINT8 sec_level; 1590 UINT8 key_size; 1591 }tBTM_LE_PENC_KEYS; 1592 1593 /* BLE CSRK keys */ 1594 typedef struct 1595 { 1596 UINT32 counter; 1597 BT_OCTET16 csrk; 1598 UINT8 sec_level; 1599 }tBTM_LE_PCSRK_KEYS; 1600 1601 /* BLE Encryption reproduction keys */ 1602 typedef struct 1603 { 1604 UINT16 div; 1605 UINT8 key_size; 1606 UINT8 sec_level; 1607 }tBTM_LE_LENC_KEYS; 1608 1609 /* BLE SRK keys */ 1610 typedef struct 1611 { 1612 UINT32 counter; 1613 UINT16 div; 1614 UINT8 sec_level; 1615 1616 }tBTM_LE_LCSRK_KEYS; 1617 1618 1619 typedef union 1620 { 1621 tBTM_LE_PENC_KEYS penc_key; /* received peer encryption key */ 1622 tBTM_LE_PCSRK_KEYS pcsrk_key; /* received peer device SRK */ 1623 BT_OCTET16 pid_key; /* peer device ID key */ 1624 tBTM_LE_LENC_KEYS lenc_key; /* local encryption reproduction keys LTK = = d1(ER,DIV,0)*/ 1625 tBTM_LE_LCSRK_KEYS lcsrk_key; /* local device CSRK = d1(ER,DIV,1)*/ 1626 }tBTM_LE_KEY_VALUE; 1627 1628 typedef struct 1629 { 1630 tBTM_LE_KEY_TYPE key_type; 1631 tBTM_LE_KEY_VALUE *p_key_value; 1632 }tBTM_LE_KEY; 1633 1634 typedef union 1635 { 1636 tBTM_LE_IO_REQ io_req; /* BTM_LE_IO_REQ_EVT */ 1637 UINT32 key_notif; /* BTM_LE_KEY_NOTIF_EVT */ 1638 /* no callback dta for BTM_LE_KEY_REQ_EVT & BTM_LE_OOB_REQ_EVT */ 1639 #if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE 1640 tBTM_LE_COMPLT complt; /* BTM_LE_COMPLT_EVT */ 1641 #endif 1642 tBTM_LE_KEY key; 1643 } tBTM_LE_EVT_DATA; 1644 1645 /* Simple Pairing Events. Called by the stack when Simple Pairing related 1646 ** events occur. 1647 */ 1648 typedef UINT8 (tBTM_LE_CALLBACK) (tBTM_LE_EVT event, BD_ADDR bda, tBTM_LE_EVT_DATA *p_data); 1649 1650 #define BTM_BLE_KEY_TYPE_ID 1 1651 #define BTM_BLE_KEY_TYPE_ER 2 1652 #define BTM_BLE_KEY_TYPE_COUNTER 3 //tobe obsolete 1653 1654 typedef struct 1655 { 1656 BT_OCTET16 ir; 1657 BT_OCTET16 irk; 1658 BT_OCTET16 dhk; 1659 1660 }tBTM_BLE_LOCAL_ID_KEYS; 1661 1662 typedef union 1663 { 1664 tBTM_BLE_LOCAL_ID_KEYS id_keys; 1665 BT_OCTET16 er; 1666 }tBTM_BLE_LOCAL_KEYS; 1667 1668 1669 /* New LE identity key for local device. 1670 */ 1671 typedef void (tBTM_LE_KEY_CALLBACK) (UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key); 1672 1673 1674 /*************************** 1675 ** Security Manager Types 1676 ****************************/ 1677 /* Structure that applications use to register with BTM_SecRegister */ 1678 typedef struct 1679 { 1680 tBTM_AUTHORIZE_CALLBACK *p_authorize_callback; 1681 tBTM_PIN_CALLBACK *p_pin_callback; 1682 tBTM_LINK_KEY_CALLBACK *p_link_key_callback; 1683 tBTM_LINK_KEY_REQ_CALLBACK *p_link_key_req_callback; 1684 tBTM_AUTH_COMPLETE_CALLBACK *p_auth_complete_callback; 1685 tBTM_ABORT_CALLBACK *p_abort_callback; 1686 tBTM_BOND_CANCEL_CMPL_CALLBACK *p_bond_cancel_cmpl_callback; 1687 tBTM_SP_CALLBACK *p_sp_callback; 1688 #if BLE_INCLUDED == TRUE 1689 #if SMP_INCLUDED == TRUE 1690 tBTM_LE_CALLBACK *p_le_callback; 1691 #endif 1692 tBTM_LE_KEY_CALLBACK *p_le_key_callback; 1693 #endif 1694 } tBTM_APPL_INFO; 1695 1696 /* Callback function for when a link supervision timeout event occurs. 1697 ** This asynchronous event is enabled/disabled by calling BTM_RegForLstoEvt(). 1698 */ 1699 typedef void (tBTM_LSTO_CBACK) (BD_ADDR remote_bda, UINT16 timeout); 1700 1701 /***************************************************************************** 1702 ** POWER MANAGEMENT 1703 *****************************************************************************/ 1704 /**************************** 1705 ** Power Manager Constants 1706 *****************************/ 1707 /* BTM Power manager status codes */ 1708 enum 1709 { 1710 BTM_PM_STS_ACTIVE = HCI_MODE_ACTIVE, 1711 BTM_PM_STS_HOLD = HCI_MODE_HOLD, 1712 BTM_PM_STS_SNIFF = HCI_MODE_SNIFF, 1713 BTM_PM_STS_PARK = HCI_MODE_PARK, 1714 BTM_PM_STS_SSR, /* report the SSR parameters in HCI_SNIFF_SUB_RATE_EVT */ 1715 BTM_PM_STS_PENDING, /* when waiting for status from controller */ 1716 BTM_PM_STS_ERROR /* when HCI command status returns error */ 1717 }; 1718 typedef UINT8 tBTM_PM_STATUS; 1719 1720 /* BTM Power manager modes */ 1721 enum 1722 { 1723 BTM_PM_MD_ACTIVE = BTM_PM_STS_ACTIVE, 1724 BTM_PM_MD_HOLD = BTM_PM_STS_HOLD, 1725 BTM_PM_MD_SNIFF = BTM_PM_STS_SNIFF, 1726 BTM_PM_MD_PARK = BTM_PM_STS_PARK, 1727 BTM_PM_MD_FORCE = 0x10 /* OR this to force ACL link to a certain mode */ 1728 }; 1729 typedef UINT8 tBTM_PM_MODE; 1730 1731 #define BTM_PM_SET_ONLY_ID 0x80 1732 1733 /* Operation codes */ 1734 #define BTM_PM_REG_SET 1 /* The module wants to set the desired power mode */ 1735 #define BTM_PM_REG_NOTIF 2 /* The module wants to receive mode change event */ 1736 #define BTM_PM_DEREG 4 /* The module does not want to involve with PM anymore */ 1737 1738 /************************ 1739 ** Power Manager Types 1740 *************************/ 1741 typedef struct 1742 { 1743 UINT16 max; 1744 UINT16 min; 1745 UINT16 attempt; 1746 UINT16 timeout; 1747 tBTM_PM_MODE mode; 1748 } tBTM_PM_PWR_MD; 1749 1750 /************************************* 1751 ** Power Manager Callback Functions 1752 **************************************/ 1753 typedef void (tBTM_PM_STATUS_CBACK) (BD_ADDR p_bda, tBTM_PM_STATUS status, 1754 UINT16 value, UINT8 hci_status); 1755 1756 1757 /************************ 1758 ** Stored Linkkey Types 1759 *************************/ 1760 #define BTM_CB_EVT_RETURN_LINK_KEYS 1 1761 #define BTM_CB_EVT_READ_STORED_LINK_KEYS 2 1762 #define BTM_CB_EVT_WRITE_STORED_LINK_KEYS 3 1763 #define BTM_CB_EVT_DELETE_STORED_LINK_KEYS 4 1764 1765 typedef struct 1766 { 1767 UINT8 event; 1768 1769 } tBTM_STORED_LINK_KEYS_EVT; 1770 1771 1772 typedef struct 1773 { 1774 UINT8 event; 1775 UINT8 num_keys; 1776 1777 } tBTM_RETURN_LINK_KEYS_EVT; 1778 1779 1780 typedef struct 1781 { 1782 BD_ADDR bd_addr; 1783 LINK_KEY link_key; 1784 1785 } tBTM_BD_ADDR_LINK_KEY_PAIR; 1786 1787 1788 typedef struct 1789 { 1790 UINT8 event; 1791 UINT8 status; 1792 UINT16 max_keys; 1793 UINT16 read_keys; 1794 1795 } tBTM_READ_STORED_LINK_KEY_COMPLETE; 1796 1797 1798 typedef struct 1799 { 1800 UINT8 event; 1801 UINT8 status; 1802 UINT8 num_keys; 1803 1804 } tBTM_WRITE_STORED_LINK_KEY_COMPLETE; 1805 1806 1807 typedef struct 1808 { 1809 UINT8 event; 1810 UINT8 status; 1811 UINT16 num_keys; 1812 1813 } tBTM_DELETE_STORED_LINK_KEY_COMPLETE; 1814 1815 1816 /* These macros are defined to check the Broadcom features supported in controller 1817 * (the return value for BTM_ReadBrcmFeatures() */ 1818 /* multi-av */ 1819 #define BTM_FEATURE_MULTI_AV_MASK 0x01 1820 #define BTM_FEATURE_MULTI_AV_OFF 0 1821 #define BTM_VSC_MULTI_AV_SUPPORTED(x) ((x)[BTM_FEATURE_MULTI_AV_OFF] & BTM_FEATURE_MULTI_AV_MASK) 1822 1823 /* WBS SBC codec */ 1824 #define BTM_FEATURE_WBS_SBC_MASK 0x02 1825 #define BTM_FEATURE_WBS_SBC_OFF 0 1826 #define BTM_VSC_WBS_SBC_SUPPORTED(x) ((x)[BTM_FEATURE_WBS_SBC_OFF] & BTM_FEATURE_WBS_SBC_MASK) 1827 1828 /* Advanced Audio LC-PLC */ 1829 #define BTM_FEATURE_AUDIO_LC_PLC_MASK 0x04 1830 #define BTM_FEATURE_AUDIO_LC_PLC_OFF 0 1831 #define BTM_VSC_AUDIO_LC_PLC_SUPPORTED(x) ((x)[BTM_FEATURE_AUDIO_LC_PLC_OFF] & BTM_FEATURE_AUDIO_LC_PLC_MASK) 1832 1833 /* Light stack for audio routing in Controller */ 1834 #define BTM_FEATURE_LIGHT_STACK_MASK 0x08 1835 #define BTM_FEATURE_LIGHT_STACK_OFF 0 1836 #define BTM_VSC_LIGHT_STACK_SUPPORTED(x) ((x)[BTM_FEATURE_LIGHT_STACK_OFF] & BTM_FEATURE_LIGHT_STACK_MASK) 1837 1838 /* NFC support */ 1839 #define BTM_FEATURE_NFC_MASK (HCI_BRCM_FEATURE_NFC_MASK) /* 0x10 */ 1840 #define BTM_FEATURE_NFC_OFF (HCI_BRCM_FEATURE_NFC_OFF) /* 0 */ 1841 #define BTM_VSC_NFC_SUPPORTED(x) ((x)[BTM_FEATURE_NFC_OFF] & BTM_FEATURE_NFC_MASK) 1842 1843 1844 /************************ 1845 ** Dual-Stack support 1846 *************************/ 1847 /* BTM_SYNC_FAIL_EVT reason codes */ 1848 #define BTM_SYNC_SUCCESS 0 1849 #define BTM_SYNC_FAIL_BTE_SWITCH_REJECTED 1 1850 #define BTM_SYNC_FAIL_TRANS_PAUSE 2 1851 #define BTM_SYNC_FAIL_CORE_SYNC 3 1852 #define BTM_SYNC_FAIL_BTA_SYNC 4 1853 #define BTM_SYNC_FAIL_TRANS_RESUME 5 1854 #define BTM_SYNC_FAIL_RESYNC 6 1855 #define BTM_SYNC_FAIL_ERROR 7 1856 #define BTM_SYNC_FAIL_UIPC_OPEN 8 1857 typedef UINT8 tBTM_SYNC_STATUS; 1858 1859 /* Direction of sync (used by BTM_SyncStack) */ 1860 #define BTM_SW_BB_TO_MM 0 1861 #define BTM_SW_TO_BB 1 /* Switch back to baseband stack (from either MM or BTC host) */ 1862 #define BTM_SW_RESYNC 2 1863 #define BTM_SW_BB_TO_BTC 3 /* Switch from baseband stack to Bluetooth Controller Host stack */ 1864 #define BTM_SW_MM_TO_BB 4 1865 #define BTM_SW_BTC_TO_BB 5 1866 typedef UINT8 tBTM_SW_DIR; 1867 1868 /* Stack synchronization events (returned by tBTM_SYNC_STACK_CBACK callback) */ 1869 #define BTM_SYNC_CPLT_EVT 0 1870 #define BTM_SYNC_BTA_EVT 1 1871 #define BTM_RESYNC_CPLT_EVT 2 1872 #define BTM_UIPC_OPENED_EVT 3 1873 #define BTM_UIPC_CLOSED_EVT 4 1874 typedef UINT8 tBTM_SYNC_STACK_EVT; 1875 1876 /* Synchronization info from BTA/application that will be sent when calling BTE sync request functions */ 1877 typedef struct 1878 { 1879 tBTM_SW_DIR dir; 1880 UINT16 lcid[BTM_SYNC_INFO_NUM_STR]; 1881 UINT8 avdt_handle[BTM_SYNC_INFO_NUM_STR]; 1882 } tBTM_SYNC_INFO; 1883 1884 /* Stack synchonization callback function 1885 ** Parameters are 1886 ** event: stack synchronization event 1887 ** status: BTM_SUCCESS if event was successful 1888 */ 1889 typedef void (*tBTM_SYNC_STACK_CBACK)(tBTM_SYNC_STACK_EVT event, tBTM_SYNC_STATUS status); 1890 1891 1892 /* Sync complete callback function. Called by bte layers after synchronization is complete 1893 ** so that BTM_SYNC can procede with the next step for switching stack to MM 1894 ** 1895 ** Parameters are 1896 ** status: BTM_SUCCESS if synchronization was successful 1897 */ 1898 typedef void (*tBTM_SYNC_CPLT_CBACK)(tBTM_STATUS status); 1899 1900 1901 1902 /* IPC event callback function. Called by BTM when an IPC event is received. 1903 ** These events are currently sent to DM through the callback function. 1904 ** 1905 ** Parameters are 1906 ** status: BTM_SUCCESS if synchronization was successful 1907 ** p_data: Actual message in the IPC 1908 */ 1909 typedef void (tBTM_IPC_EVT_CBACK)(tBTM_STATUS status, BT_HDR *p_data); 1910 1911 /* MIP evnets, callbacks */ 1912 enum 1913 { 1914 BTM_MIP_MODE_CHG_EVT, 1915 BTM_MIP_DISCONNECT_EVT, 1916 BTM_MIP_PKTS_COMPL_EVT, 1917 BTM_MIP_RXDATA_EVT 1918 }; 1919 typedef UINT8 tBTM_MIP_EVT; 1920 1921 typedef struct 1922 { 1923 tBTM_MIP_EVT event; 1924 BD_ADDR bd_addr; 1925 UINT16 mip_id; 1926 } tBTM_MIP_MODE_CHANGE; 1927 1928 typedef struct 1929 { 1930 tBTM_MIP_EVT event; 1931 UINT16 mip_id; 1932 UINT8 disc_reason; 1933 } tBTM_MIP_CONN_TIMEOUT; 1934 1935 #define BTM_MIP_MAX_RX_LEN 17 1936 1937 typedef struct 1938 { 1939 tBTM_MIP_EVT event; 1940 UINT16 mip_id; 1941 UINT8 rx_len; 1942 UINT8 rx_data[BTM_MIP_MAX_RX_LEN]; 1943 } tBTM_MIP_RXDATA; 1944 1945 typedef struct 1946 { 1947 tBTM_MIP_EVT event; 1948 BD_ADDR bd_addr; 1949 UINT8 data[11]; /* data[0] shows Vender-specific device type */ 1950 } tBTM_MIP_EIR_HANDSHAKE; 1951 1952 typedef struct 1953 { 1954 tBTM_MIP_EVT event; 1955 UINT16 num_sent; /* Number of packets completed at the controller */ 1956 } tBTM_MIP_PKTS_COMPL; 1957 1958 typedef union 1959 { 1960 tBTM_MIP_EVT event; 1961 tBTM_MIP_MODE_CHANGE mod_chg; 1962 tBTM_MIP_CONN_TIMEOUT conn_tmo; 1963 tBTM_MIP_EIR_HANDSHAKE eir; 1964 tBTM_MIP_PKTS_COMPL completed; 1965 tBTM_MIP_RXDATA rxdata; 1966 } tBTM_MIP_EVENT_DATA; 1967 1968 /* MIP event callback function */ 1969 typedef void (tBTM_MIP_EVENTS_CB) (tBTM_MIP_EVT event, tBTM_MIP_EVENT_DATA data); 1970 1971 /* MIP Device query callback function */ 1972 typedef BOOLEAN (tBTM_MIP_QUERY_CB) (BD_ADDR dev_addr, UINT8 *p_mode, LINK_KEY link_key); 1973 1974 /***************************************************************************** 1975 ** EXTERNAL FUNCTION DECLARATIONS 1976 *****************************************************************************/ 1977 #ifdef __cplusplus 1978 extern "C" { 1979 #endif 1980 1981 /***************************************************************************** 1982 ** DEVICE CONTROL and COMMON FUNCTIONS 1983 *****************************************************************************/ 1984 1985 /******************************************************************************* 1986 ** 1987 ** Function BTM_SetAfhChannels 1988 ** 1989 ** Description This function is called to disable channels 1990 ** 1991 ** Returns status 1992 ** 1993 *******************************************************************************/ 1994 BTM_API extern tBTM_STATUS BTM_SetAfhChannels (UINT8 first, UINT8 last); 1995 1996 /******************************************************************************* 1997 ** 1998 ** Function BTM_SetAfhChannelAssessment 1999 ** 2000 ** Description This function is called to set the channel assessment mode on or off 2001 ** 2002 ** Returns status 2003 ** 2004 *******************************************************************************/ 2005 BTM_API extern tBTM_STATUS BTM_SetAfhChannelAssessment (BOOLEAN enable_or_disable); 2006 2007 /******************************************************************************* 2008 ** 2009 ** Function BTM_DeviceReset 2010 ** 2011 ** Description This function is called to reset the controller.The Callback function 2012 ** if provided is called when startup of the device has 2013 ** completed. 2014 ** 2015 ** Returns void 2016 ** 2017 *******************************************************************************/ 2018 BTM_API extern void BTM_DeviceReset (tBTM_CMPL_CB *p_cb); 2019 2020 2021 /******************************************************************************* 2022 ** 2023 ** Function BTM_IsDeviceUp 2024 ** 2025 ** Description This function is called to check if the device is up. 2026 ** 2027 ** Returns TRUE if device is up, else FALSE 2028 ** 2029 *******************************************************************************/ 2030 BTM_API extern BOOLEAN BTM_IsDeviceUp (void); 2031 2032 2033 /******************************************************************************* 2034 ** 2035 ** Function BTM_SetLocalDeviceName 2036 ** 2037 ** Description This function is called to set the local device name. 2038 ** 2039 ** Returns BTM_CMD_STARTED if successful, otherwise an error 2040 ** 2041 *******************************************************************************/ 2042 BTM_API extern tBTM_STATUS BTM_SetLocalDeviceName (char *p_name); 2043 2044 /******************************************************************************* 2045 ** 2046 ** Function BTM_SetDeviceClass 2047 ** 2048 ** Description This function is called to set the local device class 2049 ** 2050 ** Returns BTM_SUCCESS if successful, otherwise an error 2051 ** 2052 *******************************************************************************/ 2053 BTM_API extern tBTM_STATUS BTM_SetDeviceClass (DEV_CLASS dev_class); 2054 2055 2056 /******************************************************************************* 2057 ** 2058 ** Function BTM_ReadLocalDeviceName 2059 ** 2060 ** Description This function is called to read the local device name. 2061 ** 2062 ** Returns status of the operation 2063 ** If success, BTM_SUCCESS is returned and p_name points stored 2064 ** local device name 2065 ** If BTM doesn't store local device name, BTM_NO_RESOURCES is 2066 ** is returned and p_name is set to NULL 2067 ** 2068 *******************************************************************************/ 2069 BTM_API extern tBTM_STATUS BTM_ReadLocalDeviceName (char **p_name); 2070 2071 /******************************************************************************* 2072 ** 2073 ** Function BTM_ReadLocalDeviceNameFromController 2074 ** 2075 ** Description Get local device name from controller. Do not use cached 2076 ** name (used to get chip-id prior to btm reset complete). 2077 ** 2078 ** Returns BTM_CMD_STARTED if successful, otherwise an error 2079 ** 2080 *******************************************************************************/ 2081 BTM_API extern tBTM_STATUS BTM_ReadLocalDeviceNameFromController (tBTM_CMPL_CB *p_rln_cmpl_cback); 2082 2083 /******************************************************************************* 2084 ** 2085 ** Function BTM_ReadLocalVersion 2086 ** 2087 ** Description This function is called to read the local device version 2088 ** 2089 ** Returns BTM_SUCCESS if successful, otherwise an error 2090 ** 2091 *******************************************************************************/ 2092 BTM_API extern tBTM_STATUS BTM_ReadLocalVersion (tBTM_VERSION_INFO *p_vers); 2093 2094 2095 /******************************************************************************* 2096 ** 2097 ** Function BTM_ReadLocalDeviceAddr 2098 ** 2099 ** Description This function is called to read the local device address 2100 ** 2101 ** Returns BTM_SUCCESS 2102 ** Callback returns the local device address 2103 ** 2104 *******************************************************************************/ 2105 BTM_API extern tBTM_STATUS BTM_ReadLocalDeviceAddr (tBTM_CMPL_CB *p_cb); 2106 2107 2108 /******************************************************************************* 2109 ** 2110 ** Function BTM_GetLocalDeviceAddr 2111 ** 2112 ** Description This function is called to read the local device address 2113 ** 2114 ** Returns void 2115 ** the local device address is copied into bd_addr 2116 ** 2117 *******************************************************************************/ 2118 BTM_API extern void BTM_GetLocalDeviceAddr (BD_ADDR bd_addr); 2119 2120 2121 /******************************************************************************* 2122 ** 2123 ** Function BTM_ReadDeviceClass 2124 ** 2125 ** Description This function is called to read the local device class 2126 ** 2127 ** Returns pointer to the device class 2128 ** 2129 *******************************************************************************/ 2130 BTM_API extern UINT8 *BTM_ReadDeviceClass (void); 2131 2132 2133 /******************************************************************************* 2134 ** 2135 ** Function BTM_ReadLocalFeatures 2136 ** 2137 ** Description This function is called to read the local features 2138 ** 2139 ** Returns pointer to the local features string 2140 ** 2141 *******************************************************************************/ 2142 BTM_API extern UINT8 *BTM_ReadLocalFeatures (void); 2143 2144 /******************************************************************************* 2145 ** 2146 ** Function BTM_ReadBrcmFeatures 2147 ** 2148 ** Description This function is called to read the Broadcom specific features 2149 ** 2150 ** Returns pointer to the Broadcom features string 2151 ** 2152 *******************************************************************************/ 2153 BTM_API extern UINT8 *BTM_ReadBrcmFeatures (void); 2154 2155 /******************************************************************************* 2156 ** 2157 ** Function BTM_RegisterForDeviceStatusNotif 2158 ** 2159 ** Description This function is called to register for device status 2160 ** change notifications. 2161 ** 2162 ** Returns pointer to previous caller's callback function or NULL if first 2163 ** registration. 2164 ** 2165 *******************************************************************************/ 2166 BTM_API extern tBTM_DEV_STATUS_CB *BTM_RegisterForDeviceStatusNotif (tBTM_DEV_STATUS_CB *p_cb); 2167 2168 2169 /******************************************************************************* 2170 ** 2171 ** Function BTM_RegisterForVSEvents 2172 ** 2173 ** Description This function is called to register/deregister for vendor 2174 ** specific HCI events. 2175 ** 2176 ** If is_register=TRUE, then the function will be registered; 2177 ** if is_register=FALSE, then the function will be deregistered. 2178 ** 2179 ** Returns BTM_SUCCESS if successful, 2180 ** BTM_BUSY if maximum number of callbacks have already been 2181 ** registered. 2182 ** 2183 *******************************************************************************/ 2184 BTM_API extern tBTM_STATUS BTM_RegisterForVSEvents (tBTM_VS_EVT_CB *p_cb, BOOLEAN is_register); 2185 2186 2187 /******************************************************************************* 2188 ** 2189 ** Function BTM_ContinueReset 2190 ** 2191 ** Description Instructs stack to continue its stack initialization after 2192 ** an application has completed any vender specific commands 2193 ** sent to the controller. 2194 ** 2195 ** Note: This function is only called if an application 2196 ** initialization function has been inserted in the reset 2197 ** sequence. (BTM_APP_DEV_INIT is defined with a function). 2198 ** 2199 ** Returns void 2200 ** 2201 *******************************************************************************/ 2202 BTM_API extern void BTM_ContinueReset (void); 2203 2204 2205 /******************************************************************************* 2206 ** 2207 ** Function BTM_VendorSpecificCommand 2208 ** 2209 ** Description Send a vendor specific HCI command to the controller. 2210 ** 2211 ** Returns 2212 ** BTM_SUCCESS Command sent. Does not expect command complete 2213 ** event. (command cmpl callback param is NULL) 2214 ** BTM_CMD_STARTED Command sent. Waiting for command cmpl event. 2215 ** BTM_BUSY Command not sent. Waiting for cmd cmpl event for 2216 ** prior command. 2217 ** 2218 *******************************************************************************/ 2219 BTM_API extern tBTM_STATUS BTM_VendorSpecificCommand(UINT16 opcode, 2220 UINT8 param_len, 2221 UINT8 *p_param_buf, 2222 tBTM_VSC_CMPL_CB *p_cb); 2223 2224 2225 /******************************************************************************* 2226 ** 2227 ** Function BTM_AllocateSCN 2228 ** 2229 ** Description Look through the Server Channel Numbers for a free one to be 2230 ** used with an RFCOMM connection. 2231 ** 2232 ** Returns Allocated SCN number or 0 if none. 2233 ** 2234 *******************************************************************************/ 2235 BTM_API extern UINT8 BTM_AllocateSCN(void); 2236 2237 // btla-specific ++ 2238 /******************************************************************************* 2239 ** 2240 ** Function BTM_TryAllocateSCN 2241 ** 2242 ** Description Try to allocate a fixed server channel 2243 ** 2244 ** Returns Returns TRUE if server channel was available 2245 ** 2246 *******************************************************************************/ 2247 BTM_API extern BOOLEAN BTM_TryAllocateSCN(UINT8 scn); 2248 // btla-specific -- 2249 2250 2251 /******************************************************************************* 2252 ** 2253 ** Function BTM_FreeSCN 2254 ** 2255 ** Description Free the specified SCN. 2256 ** 2257 ** Returns TRUE if successful, FALSE if SCN is not in use or invalid 2258 ** 2259 *******************************************************************************/ 2260 BTM_API extern BOOLEAN BTM_FreeSCN(UINT8 scn); 2261 2262 2263 /******************************************************************************* 2264 ** 2265 ** Function BTM_SetTraceLevel 2266 ** 2267 ** Description This function sets the trace level for BTM. If called with 2268 ** a value of 0xFF, it simply returns the current trace level. 2269 ** 2270 ** Returns The new or current trace level 2271 ** 2272 *******************************************************************************/ 2273 BTM_API extern UINT8 BTM_SetTraceLevel (UINT8 new_level); 2274 2275 2276 /******************************************************************************* 2277 ** 2278 ** Function BTM_WritePageTimeout 2279 ** 2280 ** Description Send HCI Wite Page Timeout. 2281 ** 2282 ** Returns 2283 ** BTM_SUCCESS Command sent. 2284 ** BTM_NO_RESOURCES If out of resources to send the command. 2285 ** 2286 *******************************************************************************/ 2287 BTM_API extern tBTM_STATUS BTM_WritePageTimeout(UINT16 timeout); 2288 2289 /******************************************************************************* 2290 ** 2291 ** Function BTM_WriteVoiceSettings 2292 ** 2293 ** Description Send HCI Write Voice Settings command. 2294 ** See hcidefs.h for settings bitmask values. 2295 ** 2296 ** Returns 2297 ** BTM_SUCCESS Command sent. 2298 ** BTM_NO_RESOURCES If out of resources to send the command. 2299 ** 2300 ** 2301 *******************************************************************************/ 2302 BTM_API extern tBTM_STATUS BTM_WriteVoiceSettings(UINT16 settings); 2303 2304 /******************************************************************************* 2305 ** 2306 ** Function BTM_EnableTestMode 2307 ** 2308 ** Description Send HCI the enable device under test command. 2309 ** 2310 ** Note: Controller can only be taken out of this mode by 2311 ** resetting the controller. 2312 ** 2313 ** Returns 2314 ** BTM_SUCCESS Command sent. 2315 ** BTM_NO_RESOURCES If out of resources to send the command. 2316 ** 2317 ** 2318 *******************************************************************************/ 2319 BTM_API extern tBTM_STATUS BTM_EnableTestMode(void); 2320 2321 2322 /***************************************************************************** 2323 ** DEVICE DISCOVERY FUNCTIONS - Inquiry, Remote Name, Discovery, Class of Device 2324 *****************************************************************************/ 2325 2326 /******************************************************************************* 2327 ** 2328 ** Function BTM_SetDiscoverability 2329 ** 2330 ** Description This function is called to set the device into or out of 2331 ** discoverable mode. Discoverable mode means inquiry 2332 ** scans are enabled. If a value of '0' is entered for window or 2333 ** interval, the default values are used. 2334 ** 2335 ** Returns BTM_SUCCESS if successful 2336 ** BTM_BUSY if a setting of the filter is already in progress 2337 ** BTM_NO_RESOURCES if couldn't get a memory pool buffer 2338 ** BTM_ILLEGAL_VALUE if a bad parameter was detected 2339 ** BTM_WRONG_MODE if the device is not up. 2340 ** 2341 *******************************************************************************/ 2342 BTM_API extern tBTM_STATUS BTM_SetDiscoverability (UINT16 inq_mode, UINT16 window, 2343 UINT16 interval); 2344 2345 2346 /******************************************************************************* 2347 ** 2348 ** Function BTM_ReadDiscoverability 2349 ** 2350 ** Description This function is called to read the current discoverability 2351 ** mode of the device. 2352 ** 2353 ** Output Params: p_window - current inquiry scan duration 2354 ** p_interval - current inquiry scan interval 2355 ** 2356 ** Returns BTM_NON_DISCOVERABLE, BTM_LIMITED_DISCOVERABLE, or 2357 ** BTM_GENERAL_DISCOVERABLE 2358 ** 2359 *******************************************************************************/ 2360 BTM_API extern UINT16 BTM_ReadDiscoverability (UINT16 *p_window, 2361 UINT16 *p_interval); 2362 2363 2364 /******************************************************************************* 2365 ** 2366 ** Function BTM_SetPeriodicInquiryMode 2367 ** 2368 ** Description This function is called to set the device periodic inquiry mode. 2369 ** If the duration is zero, the periodic inquiry mode is cancelled. 2370 ** 2371 ** Parameters: p_inqparms - pointer to the inquiry information 2372 ** mode - GENERAL or LIMITED inquiry 2373 ** duration - length in 1.28 sec intervals (If '0', the inquiry is CANCELLED) 2374 ** max_resps - maximum amount of devices to search for before ending the inquiry 2375 ** filter_cond_type - BTM_CLR_INQUIRY_FILTER, BTM_FILTER_COND_DEVICE_CLASS, or 2376 ** BTM_FILTER_COND_BD_ADDR 2377 ** filter_cond - value for the filter (based on filter_cond_type) 2378 ** 2379 ** max_delay - maximum amount of time between successive inquiries 2380 ** min_delay - minimum amount of time between successive inquiries 2381 ** p_results_cb - callback returning pointer to results (tBTM_INQ_RESULTS) 2382 ** 2383 ** Returns BTM_CMD_STARTED if successfully started 2384 ** BTM_ILLEGAL_VALUE if a bad parameter is detected 2385 ** BTM_NO_RESOURCES if could not allocate a message buffer 2386 ** BTM_SUCCESS - if cancelling the periodic inquiry 2387 ** BTM_BUSY - if an inquiry is already active 2388 ** BTM_WRONG_MODE if the device is not up. 2389 ** 2390 *******************************************************************************/ 2391 BTM_API extern tBTM_STATUS BTM_SetPeriodicInquiryMode (tBTM_INQ_PARMS *p_inqparms, 2392 UINT16 max_delay, UINT16 min_delay, 2393 tBTM_INQ_RESULTS_CB *p_results_cb); 2394 2395 2396 /******************************************************************************* 2397 ** 2398 ** Function BTM_StartInquiry 2399 ** 2400 ** Description This function is called to start an inquiry. 2401 ** 2402 ** Parameters: p_inqparms - pointer to the inquiry information 2403 ** mode - GENERAL or LIMITED inquiry 2404 ** duration - length in 1.28 sec intervals (If '0', the inquiry is CANCELLED) 2405 ** max_resps - maximum amount of devices to search for before ending the inquiry 2406 ** filter_cond_type - BTM_CLR_INQUIRY_FILTER, BTM_FILTER_COND_DEVICE_CLASS, or 2407 ** BTM_FILTER_COND_BD_ADDR 2408 ** filter_cond - value for the filter (based on filter_cond_type) 2409 ** 2410 ** p_results_cb - Pointer to the callback routine which gets called 2411 ** upon receipt of an inquiry result. If this field is 2412 ** NULL, the application is not notified. 2413 ** 2414 ** p_cmpl_cb - Pointer to the callback routine which gets called 2415 ** upon completion. If this field is NULL, the 2416 ** application is not notified when completed. 2417 ** Returns tBTM_STATUS 2418 ** BTM_CMD_STARTED if successfully initiated 2419 ** BTM_BUSY if already in progress 2420 ** BTM_ILLEGAL_VALUE if parameter(s) are out of range 2421 ** BTM_NO_RESOURCES if could not allocate resources to start the command 2422 ** BTM_WRONG_MODE if the device is not up. 2423 ** 2424 *******************************************************************************/ 2425 BTM_API extern tBTM_STATUS BTM_StartInquiry (tBTM_INQ_PARMS *p_inqparms, 2426 tBTM_INQ_RESULTS_CB *p_results_cb, 2427 tBTM_CMPL_CB *p_cmpl_cb); 2428 2429 2430 /******************************************************************************* 2431 ** 2432 ** Function BTM_IsInquiryActive 2433 ** 2434 ** Description This function returns a bit mask of the current inquiry state 2435 ** 2436 ** Returns BTM_INQUIRY_INACTIVE if inactive (0) 2437 ** BTM_LIMITED_INQUIRY_ACTIVE if a limted inquiry is active 2438 ** BTM_GENERAL_INQUIRY_ACTIVE if a general inquiry is active 2439 ** BTM_PERIODIC_INQUIRY_ACTIVE if a periodic inquiry is active 2440 ** 2441 *******************************************************************************/ 2442 BTM_API extern UINT16 BTM_IsInquiryActive (void); 2443 2444 2445 /******************************************************************************* 2446 ** 2447 ** Function BTM_CancelInquiry 2448 ** 2449 ** Description This function cancels an inquiry if active 2450 ** 2451 ** Returns BTM_SUCCESS if successful 2452 ** BTM_NO_RESOURCES if could not allocate a message buffer 2453 ** BTM_WRONG_MODE if the device is not up. 2454 ** 2455 *******************************************************************************/ 2456 BTM_API extern tBTM_STATUS BTM_CancelInquiry(void); 2457 2458 2459 /******************************************************************************* 2460 ** 2461 ** Function BTM_CancelPeriodicInquiry 2462 ** 2463 ** Description This function cancels a periodic inquiry 2464 ** 2465 ** Returns 2466 ** BTM_NO_RESOURCES if could not allocate a message buffer 2467 ** BTM_SUCCESS - if cancelling the periodic inquiry 2468 ** BTM_WRONG_MODE if the device is not up. 2469 ** 2470 *******************************************************************************/ 2471 BTM_API extern tBTM_STATUS BTM_CancelPeriodicInquiry(void); 2472 2473 2474 /******************************************************************************* 2475 ** 2476 ** Function BTM_SetInquiryFilterCallback 2477 ** 2478 ** Description Host can register to be asked whenever an inquiry result 2479 ** is received. If host does not like the device no name 2480 ** request is issued for the device 2481 ** 2482 ** Returns void 2483 ** 2484 *******************************************************************************/ 2485 BTM_API extern void BTM_SetInquiryFilterCallback(tBTM_FILTER_CB *p_callback); 2486 2487 2488 /******************************************************************************* 2489 ** 2490 ** Function BTM_SetConnectability 2491 ** 2492 ** Description This function is called to set the device into or out of 2493 ** connectable mode. Discoverable mode means page scans enabled. 2494 ** 2495 ** Returns BTM_SUCCESS if successful 2496 ** BTM_ILLEGAL_VALUE if a bad parameter is detected 2497 ** BTM_NO_RESOURCES if could not allocate a message buffer 2498 ** BTM_WRONG_MODE if the device is not up. 2499 ** 2500 *******************************************************************************/ 2501 BTM_API extern tBTM_STATUS BTM_SetConnectability (UINT16 page_mode, UINT16 window, 2502 UINT16 interval); 2503 2504 2505 /******************************************************************************* 2506 ** 2507 ** Function BTM_ReadConnectability 2508 ** 2509 ** Description This function is called to read the current discoverability 2510 ** mode of the device. 2511 ** Output Params p_window - current page scan duration 2512 ** p_interval - current time between page scans 2513 ** 2514 ** Returns BTM_NON_CONNECTABLE or BTM_CONNECTABLE 2515 ** 2516 *******************************************************************************/ 2517 BTM_API extern UINT16 BTM_ReadConnectability (UINT16 *p_window, UINT16 *p_interval); 2518 2519 2520 /******************************************************************************* 2521 ** 2522 ** Function BTM_SetInquiryMode 2523 ** 2524 ** Description This function is called to set standard, with RSSI 2525 ** mode or extended of the inquiry for local device. 2526 ** 2527 ** Input Params: BTM_INQ_RESULT_STANDARD, BTM_INQ_RESULT_WITH_RSSI or 2528 ** BTM_INQ_RESULT_EXTENDED 2529 ** 2530 ** Returns BTM_SUCCESS if successful 2531 ** BTM_NO_RESOURCES if couldn't get a memory pool buffer 2532 ** BTM_ILLEGAL_VALUE if a bad parameter was detected 2533 ** BTM_WRONG_MODE if the device is not up. 2534 ** 2535 *******************************************************************************/ 2536 BT_API extern tBTM_STATUS BTM_SetInquiryMode (UINT8 mode); 2537 2538 /******************************************************************************* 2539 ** 2540 ** Function BTM_SetInquiryScanType 2541 ** 2542 ** Description This function is called to set the iquiry scan-type to 2543 ** standard or interlaced. 2544 ** 2545 ** Input Params: BTM_SCAN_TYPE_STANDARD or BTM_SCAN_TYPE_INTERLACED 2546 ** 2547 ** Returns BTM_SUCCESS if successful 2548 ** BTM_MODE_UNSUPPORTED if not a 1.2 device 2549 ** BTM_WRONG_MODE if the device is not up. 2550 ** 2551 *******************************************************************************/ 2552 BT_API extern tBTM_STATUS BTM_SetInquiryScanType (UINT16 scan_type); 2553 2554 /******************************************************************************* 2555 ** 2556 ** Function BTM_SetPageScanType 2557 ** 2558 ** Description This function is called to set the page scan-type to 2559 ** standard or interlaced. 2560 ** 2561 ** Input Params: BTM_SCAN_TYPE_STANDARD or BTM_SCAN_TYPE_INTERLACED 2562 ** 2563 ** Returns BTM_SUCCESS if successful 2564 ** BTM_MODE_UNSUPPORTED if not a 1.2 device 2565 ** BTM_WRONG_MODE if the device is not up. 2566 ** 2567 *******************************************************************************/ 2568 2569 BT_API extern tBTM_STATUS BTM_SetPageScanType (UINT16 scan_type); 2570 2571 /******************************************************************************* 2572 ** 2573 ** Function BTM_ReadRemoteDeviceName 2574 ** 2575 ** Description This function initiates a remote device HCI command to the 2576 ** controller and calls the callback when the process has completed. 2577 ** 2578 ** Input Params: remote_bda - device address of name to retrieve 2579 ** p_cb - callback function called when BTM_CMD_STARTED 2580 ** is returned. 2581 ** A pointer to tBTM_REMOTE_DEV_NAME is passed to the 2582 ** callback. 2583 ** 2584 ** Returns 2585 ** BTM_CMD_STARTED is returned if the request was successfully sent 2586 ** to HCI. 2587 ** BTM_BUSY if already in progress 2588 ** BTM_UNKNOWN_ADDR if device address is bad 2589 ** BTM_NO_RESOURCES if could not allocate resources to start the command 2590 ** BTM_WRONG_MODE if the device is not up. 2591 ** 2592 *******************************************************************************/ 2593 BTM_API extern tBTM_STATUS BTM_ReadRemoteDeviceName (BD_ADDR remote_bda, 2594 tBTM_CMPL_CB *p_cb); 2595 2596 2597 /******************************************************************************* 2598 ** 2599 ** Function BTM_CancelRemoteDeviceName 2600 ** 2601 ** Description This function initiates the cancel request for the specified 2602 ** remote device. 2603 ** 2604 ** Input Params: None 2605 ** 2606 ** Returns 2607 ** BTM_CMD_STARTED is returned if the request was successfully sent 2608 ** to HCI. 2609 ** BTM_NO_RESOURCES if could not allocate resources to start the command 2610 ** BTM_WRONG_MODE if there is not an active remote name request. 2611 ** 2612 *******************************************************************************/ 2613 BTM_API extern tBTM_STATUS BTM_CancelRemoteDeviceName (void); 2614 2615 /******************************************************************************* 2616 ** 2617 ** Function BTM_ReadRemoteVersion 2618 ** 2619 ** Description This function is called to read a remote device's version 2620 ** 2621 ** Returns BTM_SUCCESS if successful, otherwise an error 2622 ** 2623 *******************************************************************************/ 2624 BTM_API extern tBTM_STATUS BTM_ReadRemoteVersion (BD_ADDR addr, 2625 UINT8 *lmp_version, 2626 UINT16 *manufacturer, 2627 UINT16 *lmp_sub_version); 2628 2629 /******************************************************************************* 2630 ** 2631 ** Function BTM_ReadRemoteFeatures 2632 ** 2633 ** Description This function is called to read a remote device's features 2634 ** 2635 ** Returns pointer to the features string 2636 ** 2637 *******************************************************************************/ 2638 BTM_API extern UINT8 *BTM_ReadRemoteFeatures (BD_ADDR addr); 2639 2640 /******************************************************************************* 2641 ** 2642 ** Function BTM_InqFirstResult 2643 ** 2644 ** Description This function looks through the inquiry database for the first 2645 ** used entrysince the LAST inquiry. This is used in conjunction 2646 ** with BTM_InqNext by applications as a way to walk through the 2647 ** inquiry results database. 2648 ** 2649 ** Returns pointer to first in-use entry, or NULL if DB is empty 2650 ** 2651 *******************************************************************************/ 2652 BTM_API extern tBTM_INQ_INFO *BTM_InqFirstResult (void); 2653 2654 2655 /******************************************************************************* 2656 ** 2657 ** Function BTM_InqNextResult 2658 ** 2659 ** Description This function looks through the inquiry database for the next 2660 ** used entrysince the LAST inquiry. If the input parameter is NULL, 2661 ** the first entry is returned. 2662 ** 2663 ** Returns pointer to next in-use entry, or NULL if no more found. 2664 ** 2665 *******************************************************************************/ 2666 BTM_API extern tBTM_INQ_INFO *BTM_InqNextResult (tBTM_INQ_INFO *p_cur); 2667 2668 2669 /******************************************************************************* 2670 ** 2671 ** Function BTM_InqDbRead 2672 ** 2673 ** Description This function looks through the inquiry database for a match 2674 ** based on Bluetooth Device Address. This is the application's 2675 ** interface to get the inquiry details of a specific BD address. 2676 ** 2677 ** Returns pointer to entry, or NULL if not found 2678 ** 2679 *******************************************************************************/ 2680 BTM_API extern tBTM_INQ_INFO *BTM_InqDbRead (BD_ADDR p_bda); 2681 2682 2683 /******************************************************************************* 2684 ** 2685 ** Function BTM_InqDbFirst 2686 ** 2687 ** Description This function looks through the inquiry database for the first 2688 ** used entry, and returns that. This is used in conjunction with 2689 ** BTM_InqDbNext by applications as a way to walk through the 2690 ** inquiry database. 2691 ** 2692 ** Returns pointer to first in-use entry, or NULL if DB is empty 2693 ** 2694 *******************************************************************************/ 2695 BTM_API extern tBTM_INQ_INFO *BTM_InqDbFirst (void); 2696 2697 2698 /******************************************************************************* 2699 ** 2700 ** Function BTM_InqDbNext 2701 ** 2702 ** Description This function looks through the inquiry database for the next 2703 ** used entry, and returns that. If the input parameter is NULL, 2704 ** the first entry is returned. 2705 ** 2706 ** Returns pointer to next in-use entry, or NULL if no more found. 2707 ** 2708 *******************************************************************************/ 2709 BTM_API extern tBTM_INQ_INFO *BTM_InqDbNext (tBTM_INQ_INFO *p_cur); 2710 2711 2712 /******************************************************************************* 2713 ** 2714 ** Function BTM_ClearInqDb 2715 ** 2716 ** Description This function is called to clear out a device or all devices 2717 ** from the inquiry database. 2718 ** 2719 ** Parameter p_bda - (input) BD_ADDR -> Address of device to clear 2720 ** (NULL clears all entries) 2721 ** 2722 ** Returns BTM_BUSY if an inquiry, get remote name, or event filter 2723 ** is active, otherwise BTM_SUCCESS 2724 ** 2725 *******************************************************************************/ 2726 BTM_API extern tBTM_STATUS BTM_ClearInqDb (BD_ADDR p_bda); 2727 2728 2729 /******************************************************************************* 2730 ** 2731 ** Function BTM_ReadNumInqDbEntries 2732 ** 2733 ** Returns This function returns the number of entries in the inquiry database. 2734 ** 2735 *******************************************************************************/ 2736 BTM_API extern UINT8 BTM_ReadNumInqDbEntries (void); 2737 2738 2739 /******************************************************************************* 2740 ** 2741 ** Function BTM_InquiryRegisterForChanges 2742 ** 2743 ** Description This function is called to register a callback for when the 2744 ** inquiry database changes, i.e. new entry or entry deleted. 2745 ** 2746 ** Returns BTM_SUCCESS if successful, otherwise error code 2747 ** 2748 *******************************************************************************/ 2749 BTM_API extern tBTM_STATUS BTM_InquiryRegisterForChanges (tBTM_INQ_DB_CHANGE_CB *p_cb); 2750 2751 /******************************************************************************* 2752 ** 2753 ** Function BTM_ReadInquiryRspTxPower 2754 ** 2755 ** Description This command will read the inquiry Transmit Power level used 2756 ** to transmit the FHS and EIR data packets. 2757 ** This can be used directly in the Tx Power Level EIR data type. 2758 ** 2759 ** Returns BTM_SUCCESS if successful 2760 ** 2761 *******************************************************************************/ 2762 BTM_API extern tBTM_STATUS BTM_ReadInquiryRspTxPower (tBTM_CMPL_CB *p_cb); 2763 2764 /******************************************************************************* 2765 ** 2766 ** Function BTM_WriteInquiryTxPower 2767 ** 2768 ** Description This command is used to write the inquiry transmit power level 2769 ** used to transmit the inquiry (ID) data packets. The Controller 2770 ** should use the supported TX power level closest to the Tx_Power 2771 ** parameter. 2772 ** 2773 ** Returns BTM_SUCCESS if successful 2774 ** 2775 *******************************************************************************/ 2776 BTM_API extern tBTM_STATUS BTM_WriteInquiryTxPower (INT8 tx_power); 2777 2778 /******************************************************************************* 2779 ** 2780 ** Function BTM_StartDiscovery 2781 ** 2782 ** Description This function is called by an application (or profile) 2783 ** when it wants to trigger an service discovery using the 2784 ** BTM's discovery database. 2785 ** 2786 ** Returns tBTM_STATUS 2787 ** BTM_CMD_STARTED if the discovery was initiated 2788 ** BTM_BUSY if one is already in progress 2789 ** BTM_UNKNOWN_ADDR if no addresses are in the INQ DB 2790 ** BTM_ERR_PROCESSING if err initiating the command 2791 ** 2792 *******************************************************************************/ 2793 BTM_API extern tBTM_STATUS BTM_StartDiscovery (tBTM_CMPL_CB *p_cmpl_cb, 2794 BD_ADDR_PTR p_rem_addr); 2795 2796 2797 /******************************************************************************* 2798 ** 2799 ** Function BTM_FindAttribute 2800 ** 2801 ** Description This function is called by an application (or profile) 2802 ** when it wants to see if an attribute exists in the BTM 2803 ** discovery database. 2804 ** 2805 ** Returns Pointer to matching record, or NULL 2806 ** 2807 *******************************************************************************/ 2808 BTM_API extern tSDP_DISC_REC *BTM_FindAttribute (UINT16 attr_id, 2809 tSDP_DISC_REC *p_start_rec); 2810 2811 2812 /******************************************************************************* 2813 ** 2814 ** Function BTM_FindService 2815 ** 2816 ** Description This function is called by an application (or profile) 2817 ** when it wants to see if a service exists in the BTM 2818 ** discovery database. 2819 ** 2820 ** Returns Pointer to matching record, or NULL 2821 ** 2822 *******************************************************************************/ 2823 BTM_API extern tSDP_DISC_REC *BTM_FindService (UINT16 service_uuid, 2824 tSDP_DISC_REC *p_start_rec); 2825 2826 2827 /******************************************************************************* 2828 ** 2829 ** Function BTM_SetDiscoveryParams 2830 ** 2831 ** Description This function is called to set the BTM default discovery parameters. 2832 ** These UUID and attribute filters are used during the call to 2833 ** BTM_StartDiscovery. 2834 ** 2835 ** Returns void 2836 ** 2837 *******************************************************************************/ 2838 BTM_API extern void BTM_SetDiscoveryParams (UINT16 num_uuid, tSDP_UUID *p_uuid_list, 2839 UINT16 num_attr, UINT16 *p_attr_list); 2840 2841 2842 /***************************************************************************** 2843 ** ACL CHANNEL MANAGEMENT FUNCTIONS 2844 *****************************************************************************/ 2845 /******************************************************************************* 2846 ** 2847 ** Function BTM_SetLinkPolicy 2848 ** 2849 ** Description Create and send HCI "Write Policy Set" command 2850 ** 2851 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 2852 ** 2853 *******************************************************************************/ 2854 BTM_API extern tBTM_STATUS BTM_SetLinkPolicy (BD_ADDR remote_bda, 2855 UINT16 *settings); 2856 2857 2858 /******************************************************************************* 2859 ** 2860 ** Function BTM_ReadLinkPolicy 2861 ** 2862 ** Description This function is called to read the link policy settings. 2863 ** The address of link policy results are returned in the callback. 2864 ** (tBTM_LNK_POLICY_RESULTS) 2865 ** 2866 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 2867 ** 2868 *******************************************************************************/ 2869 BTM_API extern tBTM_STATUS BTM_ReadLinkPolicy (BD_ADDR remote_bda, 2870 tBTM_CMPL_CB *p_cb); 2871 2872 2873 /******************************************************************************* 2874 ** 2875 ** Function BTM_SetDefaultLinkPolicy 2876 ** 2877 ** Description Set the default value for HCI "Write Policy Set" command 2878 ** to use when an ACL link is created. 2879 ** 2880 ** Returns void 2881 ** 2882 *******************************************************************************/ 2883 BTM_API extern void BTM_SetDefaultLinkPolicy (UINT16 settings); 2884 2885 2886 /******************************************************************************* 2887 ** 2888 ** Function BTM_SetDefaultLinkSuperTout 2889 ** 2890 ** Description Set the default value for HCI "Write Link Supervision Timeout" 2891 ** command to use when an ACL link is created. 2892 ** 2893 ** Returns void 2894 ** 2895 *******************************************************************************/ 2896 BTM_API extern void BTM_SetDefaultLinkSuperTout (UINT16 timeout); 2897 2898 2899 /******************************************************************************* 2900 ** 2901 ** Function BTM_SetLinkSuperTout 2902 ** 2903 ** Description Create and send HCI "Write Link Supervision Timeout" command 2904 ** 2905 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 2906 ** 2907 *******************************************************************************/ 2908 BTM_API extern tBTM_STATUS BTM_SetLinkSuperTout (BD_ADDR remote_bda, 2909 UINT16 timeout); 2910 2911 /******************************************************************************* 2912 ** 2913 ** Function BTM_RegForLstoEvt 2914 ** 2915 ** Description register for the HCI "Link Supervision Timeout Change" event 2916 ** 2917 ** Returns void 2918 ** 2919 *******************************************************************************/ 2920 BTM_API extern void BTM_RegForLstoEvt (tBTM_LSTO_CBACK *p_cback); 2921 2922 2923 /* These next APIs are available if the power manager is not compiled in */ 2924 #if BTM_PWR_MGR_INCLUDED == FALSE 2925 /******************************************************************************* 2926 ** 2927 ** Function BTM_SetHoldMode 2928 ** 2929 ** Description This function is called to set a connection into hold mode. 2930 ** A check is made if the connection is in sniff or park mode, 2931 ** and if yes, the hold mode is ignored. 2932 ** 2933 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 2934 ** 2935 *******************************************************************************/ 2936 BTM_API extern tBTM_STATUS BTM_SetHoldMode (BD_ADDR remote_bda, UINT16 min_interval, 2937 UINT16 max_interval); 2938 2939 2940 /******************************************************************************* 2941 ** 2942 ** Function BTM_SetSniffMode 2943 ** 2944 ** Description This function is called to set a connection into sniff mode. 2945 ** A check is made if the connection is already in sniff or park 2946 ** mode, and if yes, the sniff mode is ignored. 2947 ** 2948 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 2949 ** 2950 *******************************************************************************/ 2951 BTM_API extern tBTM_STATUS BTM_SetSniffMode (BD_ADDR remote_bda, UINT16 min_period, 2952 UINT16 max_period, UINT16 attempt, 2953 UINT16 timeout); 2954 2955 2956 /******************************************************************************* 2957 ** 2958 ** Function BTM_CancelSniffMode 2959 ** 2960 ** Description This function is called to put a connection out of sniff mode. 2961 ** A check is made if the connection is already in sniff mode, 2962 ** and if not, the cancel sniff mode is ignored. 2963 ** 2964 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 2965 ** 2966 *******************************************************************************/ 2967 BTM_API extern tBTM_STATUS BTM_CancelSniffMode (BD_ADDR remote_bda); 2968 2969 2970 /******************************************************************************* 2971 ** 2972 ** Function BTM_SetParkMode 2973 ** 2974 ** Description This function is called to set a connection into park mode. 2975 ** A check is made if the connection is already in sniff or park 2976 ** mode, and if yes, the park mode is ignored. 2977 ** 2978 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 2979 ** 2980 *******************************************************************************/ 2981 BTM_API extern tBTM_STATUS BTM_SetParkMode (BD_ADDR remote_bda, 2982 UINT16 beacon_min_period, 2983 UINT16 beacon_max_period); 2984 2985 2986 /******************************************************************************* 2987 ** 2988 ** Function BTM_CancelParkMode 2989 ** 2990 ** Description This function is called to put a connection out of park mode. 2991 ** A check is made if the connection is already in park mode, 2992 ** and if not, the cancel sniff mode is ignored. 2993 ** 2994 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 2995 ** 2996 *******************************************************************************/ 2997 BTM_API extern tBTM_STATUS BTM_CancelParkMode (BD_ADDR remote_bda); 2998 2999 3000 /******************************************************************************* 3001 ** 3002 ** Function BTM_ReadAclMode 3003 ** 3004 ** Description This returns the current mode for a specific 3005 ** ACL connection. 3006 ** 3007 ** Input Param remote_bda - device address of desired ACL connection 3008 ** 3009 ** Output Param p_mode - address where the current mode is copied into. 3010 ** BTM_ACL_MODE_NORMAL 3011 ** BTM_ACL_MODE_HOLD 3012 ** BTM_ACL_MODE_SNIFF 3013 ** BTM_ACL_MODE_PARK 3014 ** (valid only if return code is BTM_SUCCESS) 3015 ** 3016 ** Returns BTM_SUCCESS if successful, 3017 ** BTM_UNKNOWN_ADDR if bd addr is not active or bad 3018 ** 3019 *******************************************************************************/ 3020 BTM_API extern tBTM_STATUS BTM_ReadAclMode (BD_ADDR remote_bda, UINT8 *p_mode); 3021 3022 #endif /* if BTM_PWR_MGR_INCLUDED == FALSE */ 3023 3024 3025 /******************************************************************************* 3026 ** 3027 ** Function BTM_SetPacketTypes 3028 ** 3029 ** Description This function is set the packet types used for a specific 3030 ** ACL connection, 3031 ** 3032 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3033 ** 3034 *******************************************************************************/ 3035 BTM_API extern tBTM_STATUS BTM_SetPacketTypes (BD_ADDR remote_bda, UINT16 pkt_types); 3036 3037 3038 /******************************************************************************* 3039 ** 3040 ** Function BTM_ReadPacketTypes 3041 ** 3042 ** Description This function is set the packet types used for the specified 3043 ** ACL connection, 3044 ** 3045 ** Returns packet types supported for the connection, or 0 if no BD address 3046 ** 3047 *******************************************************************************/ 3048 BTM_API extern UINT16 BTM_ReadPacketTypes (BD_ADDR remote_bda); 3049 3050 3051 /******************************************************************************* 3052 ** 3053 ** Function BTM_IsAclConnectionUp 3054 ** 3055 ** Description This function is called to check if an ACL connection exists 3056 ** to a specific remote BD Address. 3057 ** 3058 ** Returns TRUE if connection is up, else FALSE. 3059 ** 3060 *******************************************************************************/ 3061 BTM_API extern BOOLEAN BTM_IsAclConnectionUp (BD_ADDR remote_bda); 3062 3063 3064 /******************************************************************************* 3065 ** 3066 ** Function BTM_GetRole 3067 ** 3068 ** Description This function is called to get the role of the local device 3069 ** for the ACL connection with the specified remote device 3070 ** 3071 ** Returns BTM_SUCCESS if connection exists. 3072 ** BTM_UNKNOWN_ADDR if no active link with bd addr specified 3073 ** 3074 *******************************************************************************/ 3075 BTM_API extern tBTM_STATUS BTM_GetRole (BD_ADDR remote_bd_addr, UINT8 *p_role); 3076 3077 3078 3079 /******************************************************************************* 3080 ** 3081 ** Function BTM_SwitchRole 3082 ** 3083 ** Description This function is called to switch role between master and 3084 ** slave. If role is already set it will do nothing. If the 3085 ** command was initiated, the callback function is called upon 3086 ** completion. 3087 ** 3088 ** Returns BTM_SUCCESS if already in specified role. 3089 ** BTM_CMD_STARTED if command issued to controller. 3090 ** BTM_NO_RESOURCES if couldn't allocate memory to issue command 3091 ** BTM_UNKNOWN_ADDR if no active link with bd addr specified 3092 ** BTM_MODE_UNSUPPORTED if local device does not support role switching 3093 ** 3094 *******************************************************************************/ 3095 BTM_API extern tBTM_STATUS BTM_SwitchRole (BD_ADDR remote_bd_addr, 3096 UINT8 new_role, 3097 tBTM_CMPL_CB *p_cb); 3098 3099 /******************************************************************************* 3100 ** 3101 ** Function BTM_ChangeLinkKey 3102 ** 3103 ** Description This function is called to change the link key of the 3104 ** connection. 3105 ** 3106 ** Returns BTM_CMD_STARTED if command issued to controller. 3107 ** BTM_NO_RESOURCES if couldn't allocate memory to issue command 3108 ** BTM_UNKNOWN_ADDR if no active link with bd addr specified 3109 ** BTM_BUSY if the previous command is not completed 3110 ** 3111 *******************************************************************************/ 3112 BTM_API extern tBTM_STATUS BTM_ChangeLinkKey (BD_ADDR remote_bd_addr, 3113 tBTM_CMPL_CB *p_cb); 3114 3115 /******************************************************************************* 3116 ** 3117 ** Function BTM_ReadRSSI 3118 ** 3119 ** Description This function is called to read the link policy settings. 3120 ** The address of link policy results are returned in the callback. 3121 ** (tBTM_RSSI_RESULTS) 3122 ** 3123 ** Returns BTM_CMD_STARTED if command issued to controller. 3124 ** BTM_NO_RESOURCES if couldn't allocate memory to issue command 3125 ** BTM_UNKNOWN_ADDR if no active link with bd addr specified 3126 ** BTM_BUSY if command is already in progress 3127 ** 3128 *******************************************************************************/ 3129 BTM_API extern tBTM_STATUS BTM_ReadRSSI (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb); 3130 3131 3132 /******************************************************************************* 3133 ** 3134 ** Function BTM_ReadTxPower 3135 ** 3136 ** Description This function is called to read the current connection 3137 ** TX power of the connection. The TX power level results 3138 ** are returned in the callback. 3139 ** (tBTM_RSSI_RESULTS) 3140 ** 3141 ** Returns BTM_CMD_STARTED if command issued to controller. 3142 ** BTM_NO_RESOURCES if couldn't allocate memory to issue command 3143 ** BTM_UNKNOWN_ADDR if no active link with bd addr specified 3144 ** BTM_BUSY if command is already in progress 3145 ** 3146 *******************************************************************************/ 3147 BTM_API extern tBTM_STATUS BTM_ReadTxPower (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb); 3148 3149 /******************************************************************************* 3150 ** 3151 ** Function BTM_ReadLinkQuality 3152 ** 3153 ** Description This function is called to read the link quality. 3154 ** The value of the link quality is returned in the callback. 3155 ** (tBTM_LINK_QUALITY_RESULTS) 3156 ** 3157 ** Returns BTM_CMD_STARTED if command issued to controller. 3158 ** BTM_NO_RESOURCES if couldn't allocate memory to issue command 3159 ** BTM_UNKNOWN_ADDR if no active link with bd addr specified 3160 ** BTM_BUSY if command is already in progress 3161 ** 3162 *******************************************************************************/ 3163 BTM_API extern tBTM_STATUS BTM_ReadLinkQuality (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb); 3164 3165 /******************************************************************************* 3166 ** 3167 ** Function BTM_RegBusyLevelNotif 3168 ** 3169 ** Description This function is called to register a callback to receive 3170 ** busy level change events. 3171 ** 3172 ** Returns BTM_SUCCESS if successfully registered, otherwise error 3173 ** 3174 *******************************************************************************/ 3175 BTM_API extern tBTM_STATUS BTM_RegBusyLevelNotif (tBTM_BL_CHANGE_CB *p_cb, UINT8 *p_level, 3176 tBTM_BL_EVENT_MASK evt_mask); 3177 3178 /******************************************************************************* 3179 ** 3180 ** Function BTM_AclRegisterForChanges 3181 ** 3182 ** Description This function is called to register a callback to receive 3183 ** ACL database change events, i.e. new connection or removed. 3184 ** 3185 ** Returns BTM_SUCCESS if successfully initiated, otherwise error 3186 ** 3187 *******************************************************************************/ 3188 BTM_API extern tBTM_STATUS BTM_AclRegisterForChanges (tBTM_ACL_DB_CHANGE_CB *p_cb); 3189 3190 /******************************************************************************* 3191 ** 3192 ** Function BTM_GetNumAclLinks 3193 ** 3194 ** Description This function is called to count the number of 3195 ** ACL links that are active. 3196 ** 3197 ** Returns UINT16 Number of active ACL links 3198 ** 3199 *******************************************************************************/ 3200 BTM_API extern UINT16 BTM_GetNumAclLinks (void); 3201 3202 3203 /******************************************************************************* 3204 ** 3205 ** Function BTM_ReadClockOffset 3206 ** 3207 ** Description This returns the clock offset for a specific 3208 ** ACL connection. 3209 ** 3210 ** Returns clock-offset or 0 if unknown 3211 ** 3212 *******************************************************************************/ 3213 BTM_API extern UINT16 BTM_ReadClockOffset (BD_ADDR remote_bda); 3214 3215 3216 /******************************************************************************* 3217 ** 3218 ** Function BTM_SetQoS 3219 ** 3220 ** Description This function is called to setup QoS 3221 ** 3222 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3223 ** 3224 *******************************************************************************/ 3225 BTM_API extern tBTM_STATUS BTM_SetQoS(BD_ADDR bd, FLOW_SPEC *p_flow, 3226 tBTM_CMPL_CB *p_cb); 3227 3228 3229 /***************************************************************************** 3230 ** (e)SCO CHANNEL MANAGEMENT FUNCTIONS 3231 *****************************************************************************/ 3232 /******************************************************************************* 3233 ** 3234 ** Function BTM_CreateSco 3235 ** 3236 ** Description This function is called to create an SCO connection. If the 3237 ** "is_orig" flag is TRUE, the connection will be originated, 3238 ** otherwise BTM will wait for the other side to connect. 3239 ** 3240 ** Returns BTM_UNKNOWN_ADDR if the ACL connection is not up 3241 ** BTM_BUSY if another SCO being set up to 3242 ** the same BD address 3243 ** BTM_NO_RESOURCES if the max SCO limit has been reached 3244 ** BTM_CMD_STARTED if the connection establishment is started. 3245 ** In this case, "*p_sco_inx" is filled in 3246 ** with the sco index used for the connection. 3247 ** 3248 *******************************************************************************/ 3249 BTM_API extern tBTM_STATUS BTM_CreateSco (BD_ADDR remote_bda, BOOLEAN is_orig, 3250 UINT16 pkt_types, UINT16 *p_sco_inx, 3251 tBTM_SCO_CB *p_conn_cb, 3252 tBTM_SCO_CB *p_disc_cb); 3253 3254 3255 /******************************************************************************* 3256 ** 3257 ** Function BTM_RemoveSco 3258 ** 3259 ** Description This function is called to remove a specific SCO connection. 3260 ** 3261 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3262 ** 3263 *******************************************************************************/ 3264 BTM_API extern tBTM_STATUS BTM_RemoveSco (UINT16 sco_inx); 3265 3266 3267 /******************************************************************************* 3268 ** 3269 ** Function BTM_SetScoPacketTypes 3270 ** 3271 ** Description This function is called to set the packet types used for 3272 ** a specific SCO connection, 3273 ** 3274 ** Parameters pkt_types - One or more of the following 3275 ** BTM_SCO_PKT_TYPES_MASK_HV1 3276 ** BTM_SCO_PKT_TYPES_MASK_HV2 3277 ** BTM_SCO_PKT_TYPES_MASK_HV3 3278 ** BTM_SCO_PKT_TYPES_MASK_EV3 3279 ** BTM_SCO_PKT_TYPES_MASK_EV4 3280 ** BTM_SCO_PKT_TYPES_MASK_EV5 3281 ** 3282 ** BTM_SCO_LINK_ALL_MASK - enables all supported types 3283 ** 3284 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3285 ** 3286 *******************************************************************************/ 3287 BTM_API extern tBTM_STATUS BTM_SetScoPacketTypes (UINT16 sco_inx, UINT16 pkt_types); 3288 3289 3290 /******************************************************************************* 3291 ** 3292 ** Function BTM_ReadScoPacketTypes 3293 ** 3294 ** Description This function is read the packet types used for a specific 3295 ** SCO connection. 3296 ** 3297 ** Returns One or more of the following (bitmask) 3298 ** BTM_SCO_PKT_TYPES_MASK_HV1 3299 ** BTM_SCO_PKT_TYPES_MASK_HV2 3300 ** BTM_SCO_PKT_TYPES_MASK_HV3 3301 ** BTM_SCO_PKT_TYPES_MASK_EV3 3302 ** BTM_SCO_PKT_TYPES_MASK_EV4 3303 ** BTM_SCO_PKT_TYPES_MASK_EV5 3304 ** 3305 ** Returns packet types supported for the connection 3306 ** 3307 *******************************************************************************/ 3308 BTM_API extern UINT16 BTM_ReadScoPacketTypes (UINT16 sco_inx); 3309 3310 3311 /******************************************************************************* 3312 ** 3313 ** Function BTM_ReadDeviceScoPacketTypes 3314 ** 3315 ** Description This function is read the SCO packet types that 3316 ** the device supports. 3317 ** 3318 ** Returns packet types supported by the device. 3319 ** 3320 *******************************************************************************/ 3321 BTM_API extern UINT16 BTM_ReadDeviceScoPacketTypes (void); 3322 3323 3324 /******************************************************************************* 3325 ** 3326 ** Function BTM_ReadScoHandle 3327 ** 3328 ** Description This function is used to read the HCI handle used for a specific 3329 ** SCO connection, 3330 ** 3331 ** Returns handle for the connection, or 0xFFFF if invalid SCO index. 3332 ** 3333 *******************************************************************************/ 3334 BTM_API extern UINT16 BTM_ReadScoHandle (UINT16 sco_inx); 3335 3336 3337 /******************************************************************************* 3338 ** 3339 ** Function BTM_ReadScoBdAddr 3340 ** 3341 ** Description This function is read the remote BD Address for a specific 3342 ** SCO connection, 3343 ** 3344 ** Returns pointer to BD address or NULL if not known 3345 ** 3346 *******************************************************************************/ 3347 BTM_API extern UINT8 *BTM_ReadScoBdAddr (UINT16 sco_inx); 3348 3349 3350 /******************************************************************************* 3351 ** 3352 ** Function BTM_ReadScoDiscReason 3353 ** 3354 ** Description This function is returns the reason why an (e)SCO connection 3355 ** has been removed. It contains the value until read, or until 3356 ** another (e)SCO connection has disconnected. 3357 ** 3358 ** Returns HCI reason or BTM_INVALID_SCO_DISC_REASON if not set. 3359 ** 3360 *******************************************************************************/ 3361 BTM_API extern UINT16 BTM_ReadScoDiscReason (void); 3362 3363 3364 /******************************************************************************* 3365 ** 3366 ** Function BTM_SetEScoMode 3367 ** 3368 ** Description This function sets up the negotiated parameters for SCO or 3369 ** eSCO, and sets as the default mode used for calls to 3370 ** BTM_CreateSco. It can be called only when there are no 3371 ** active (e)SCO links. 3372 ** 3373 ** Returns BTM_SUCCESS if the successful. 3374 ** BTM_BUSY if there are one or more active (e)SCO links. 3375 ** 3376 *******************************************************************************/ 3377 BTM_API extern tBTM_STATUS BTM_SetEScoMode (tBTM_SCO_TYPE sco_mode, 3378 tBTM_ESCO_PARAMS *p_parms); 3379 3380 /******************************************************************************* 3381 ** 3382 ** Function BTM_SetWBSCodec 3383 ** 3384 ** Description This function sends command to the controller to setup 3385 ** WBS codec for the upcoming eSCO connection. 3386 ** 3387 ** Returns BTM_SUCCESS. 3388 ** 3389 ** 3390 *******************************************************************************/ 3391 BTM_API extern tBTM_STATUS BTM_SetWBSCodec (tBTM_SCO_CODEC_TYPE codec_type); 3392 3393 /******************************************************************************* 3394 ** 3395 ** Function BTM_RegForEScoEvts 3396 ** 3397 ** Description This function registers a SCO event callback with the 3398 ** specified instance. It should be used to received 3399 ** connection indication events and change of link parameter 3400 ** events. 3401 ** 3402 ** Returns BTM_SUCCESS if the successful. 3403 ** BTM_ILLEGAL_VALUE if there is an illegal sco_inx 3404 ** 3405 *******************************************************************************/ 3406 BTM_API extern tBTM_STATUS BTM_RegForEScoEvts (UINT16 sco_inx, 3407 tBTM_ESCO_CBACK *p_esco_cback); 3408 3409 /******************************************************************************* 3410 ** 3411 ** Function BTM_ReadEScoLinkParms 3412 ** 3413 ** Description This function returns the current eSCO link parameters for 3414 ** the specified handle. This can be called anytime a connection 3415 ** is active, but is typically called after receiving the SCO 3416 ** opened callback. 3417 ** 3418 ** 3419 ** Returns BTM_SUCCESS if returned data is valid connection. 3420 ** BTM_ILLEGAL_VALUE if no connection for specified sco_inx. 3421 ** BTM_MODE_UNSUPPORTED if local controller does not support 3422 ** 1.2 specification. 3423 ** 3424 *******************************************************************************/ 3425 BTM_API extern tBTM_STATUS BTM_ReadEScoLinkParms (UINT16 sco_inx, 3426 tBTM_ESCO_DATA *p_parms); 3427 3428 /******************************************************************************* 3429 ** 3430 ** Function BTM_ChangeEScoLinkParms 3431 ** 3432 ** Description This function requests renegotiation of the parameters on 3433 ** the current eSCO Link. If any of the changes are accepted 3434 ** by the controllers, the BTM_ESCO_CHG_EVT event is sent in 3435 ** the tBTM_ESCO_CBACK function with the current settings of 3436 ** the link. The callback is registered through the call to 3437 ** BTM_SetEScoMode. 3438 ** 3439 ** 3440 ** Returns BTM_CMD_STARTED if command is successfully initiated. 3441 ** BTM_ILLEGAL_VALUE if no connection for specified sco_inx. 3442 ** BTM_NO_RESOURCES - not enough resources to initiate command. 3443 ** BTM_MODE_UNSUPPORTED if local controller does not support 3444 ** 1.2 specification. 3445 ** 3446 *******************************************************************************/ 3447 BTM_API extern tBTM_STATUS BTM_ChangeEScoLinkParms (UINT16 sco_inx, 3448 tBTM_CHG_ESCO_PARAMS *p_parms); 3449 3450 /******************************************************************************* 3451 ** 3452 ** Function BTM_EScoConnRsp 3453 ** 3454 ** Description This function is called upon receipt of an (e)SCO connection 3455 ** request event (BTM_ESCO_CONN_REQ_EVT) to accept or reject 3456 ** the request. Parameters used to negotiate eSCO links. 3457 ** If p_parms is NULL, then values set through BTM_SetEScoMode 3458 ** are used. 3459 ** If the link type of the incoming request is SCO, then only 3460 ** the tx_bw, max_latency, content format, and packet_types are 3461 ** valid. The hci_status parameter should be 3462 ** ([0x0] to accept, [0x0d..0x0f] to reject) 3463 ** 3464 ** 3465 ** Returns void 3466 ** 3467 *******************************************************************************/ 3468 BTM_API extern void BTM_EScoConnRsp (UINT16 sco_inx, UINT8 hci_status, 3469 tBTM_ESCO_PARAMS *p_parms); 3470 3471 /******************************************************************************* 3472 ** 3473 ** Function BTM_GetNumScoLinks 3474 ** 3475 ** Description This function returns the number of active SCO links. 3476 ** 3477 ** Returns UINT8 3478 ** 3479 *******************************************************************************/ 3480 BTM_API extern UINT8 BTM_GetNumScoLinks (void); 3481 3482 /***************************************************************************** 3483 ** SECURITY MANAGEMENT FUNCTIONS 3484 *****************************************************************************/ 3485 /******************************************************************************* 3486 ** 3487 ** Function BTM_SecRegister 3488 ** 3489 ** Description Application manager calls this function to register for 3490 ** security services. There can be one and only one application 3491 ** saving link keys. BTM allows only first registration. 3492 ** 3493 ** Returns TRUE if registered OK, else FALSE 3494 ** 3495 *******************************************************************************/ 3496 BTM_API extern BOOLEAN BTM_SecRegister (tBTM_APPL_INFO *p_cb_info); 3497 3498 3499 /******************************************************************************* 3500 ** 3501 ** Function BTM_SecRegisterLinkKeyNotificationCallback 3502 ** 3503 ** Description Profiles can register to be notified when a new Link Key 3504 ** is generated per connection. 3505 ** 3506 ** Returns TRUE if registered OK, else FALSE 3507 ** 3508 *******************************************************************************/ 3509 BTM_API extern BOOLEAN BTM_SecRegisterLinkKeyNotificationCallback (tBTM_LINK_KEY_CALLBACK *p_callback); 3510 3511 3512 /******************************************************************************* 3513 ** 3514 ** Function BTM_SecAddRmtNameNotifyCallback 3515 ** 3516 ** Description Profiles can register to be notified when name of the 3517 ** remote device is resolved (up to BTM_SEC_MAX_RMT_NAME_CALLBACKS). 3518 ** 3519 ** Returns TRUE if registered OK, else FALSE 3520 ** 3521 *******************************************************************************/ 3522 BTM_API extern BOOLEAN BTM_SecAddRmtNameNotifyCallback (tBTM_RMT_NAME_CALLBACK *p_callback); 3523 3524 3525 /******************************************************************************* 3526 ** 3527 ** Function BTM_SecDeleteRmtNameNotifyCallback 3528 ** 3529 ** Description A profile can deregister notification when a new Link Key 3530 ** is generated per connection. 3531 ** 3532 ** Returns TRUE if OK, else FALSE 3533 ** 3534 *******************************************************************************/ 3535 BTM_API extern BOOLEAN BTM_SecDeleteRmtNameNotifyCallback (tBTM_RMT_NAME_CALLBACK *p_callback); 3536 3537 3538 /******************************************************************************* 3539 ** 3540 ** Function BTM_SecSetConnectFilterCallback 3541 ** 3542 ** Description Host can register to be asked whenever an HCI connection 3543 ** request is received. In the registered function host 3544 ** suppose to check connectibility filters. Yes/No result 3545 ** should be returned synchronously. 3546 ** 3547 ** Returns void 3548 ** 3549 *******************************************************************************/ 3550 BTM_API extern void BTM_SecSetConnectFilterCallback (tBTM_FILTER_CB *p_callback); 3551 3552 3553 /******************************************************************************* 3554 ** 3555 ** Function BTM_GetSecurityMode 3556 ** 3557 ** Description Get security mode for the device 3558 ** 3559 ** Returns void 3560 ** 3561 *******************************************************************************/ 3562 BTM_API extern UINT8 BTM_GetSecurityMode (void); 3563 3564 3565 /******************************************************************************* 3566 ** 3567 ** Function BTM_GetSecurityFlags 3568 ** 3569 ** Description Get security flags for the device 3570 ** 3571 ** Returns BOOLEAN TRUE or FALSE is device found 3572 ** 3573 *******************************************************************************/ 3574 BTM_API extern BOOLEAN BTM_GetSecurityFlags (BD_ADDR bd_addr, UINT8 * p_sec_flags); 3575 3576 /******************************************************************************* 3577 ** 3578 ** Function BTM_ReadTrustedMask 3579 ** 3580 ** Description Get trusted mask for the device 3581 ** 3582 ** Returns NULL, if the device record is not found. 3583 ** otherwise, the trusted mask 3584 ** 3585 *******************************************************************************/ 3586 BTM_API extern UINT32 * BTM_ReadTrustedMask (BD_ADDR bd_addr); 3587 3588 3589 /******************************************************************************* 3590 ** 3591 ** Function BTM_SetSecurityMode 3592 ** 3593 ** Description Set security mode for the device 3594 ** 3595 ** Returns void 3596 ** 3597 *******************************************************************************/ 3598 BTM_API extern void BTM_SetSecurityMode (UINT8 sec_mode); 3599 3600 3601 /******************************************************************************* 3602 ** 3603 ** Function BTM_SetPinType 3604 ** 3605 ** Description Set PIN type for the device. 3606 ** 3607 ** Returns void 3608 ** 3609 *******************************************************************************/ 3610 BTM_API extern void BTM_SetPinType (UINT8 pin_type, PIN_CODE pin_code, UINT8 pin_code_len); 3611 3612 3613 /******************************************************************************* 3614 ** 3615 ** Function BTM_SetPairableMode 3616 ** 3617 ** Description Enable or disable pairing 3618 ** 3619 ** Parameters allow_pairing - (TRUE or FALSE) whether or not the device 3620 ** allows pairing. 3621 ** connect_only_paired - (TRUE or FALSE) whether or not to 3622 ** only allow paired devices to connect. 3623 ** 3624 ** Returns void 3625 ** 3626 *******************************************************************************/ 3627 BTM_API extern void BTM_SetPairableMode (BOOLEAN allow_pairing, BOOLEAN connect_only_paired); 3628 3629 /******************************************************************************* 3630 ** 3631 ** Function BTM_SetSecurityLevel 3632 ** 3633 ** Description Register service security level with Security Manager. Each 3634 ** service must register its requirements regardless of the 3635 ** security level that is used. This API is called once for originators 3636 ** nad again for acceptors of connections. 3637 ** 3638 ** Returns TRUE if registered OK, else FALSE 3639 ** 3640 *******************************************************************************/ 3641 BTM_API extern BOOLEAN BTM_SetSecurityLevel (BOOLEAN is_originator, char *p_name, 3642 UINT8 service_id, UINT16 sec_level, 3643 UINT16 psm, UINT32 mx_proto_id, 3644 UINT32 mx_chan_id); 3645 3646 /******************************************************************************* 3647 ** 3648 ** Function BTM_SetUCDSecurityLevel 3649 ** 3650 ** Description Register UCD service security level with Security Manager. Each 3651 ** service must register its requirements regardless of the 3652 ** security level that is used. This API is called once for originators 3653 ** and again for acceptors of connections. 3654 ** 3655 ** Returns TRUE if registered OK, else FALSE 3656 ** 3657 *******************************************************************************/ 3658 BTM_API extern BOOLEAN BTM_SetUCDSecurityLevel (BOOLEAN is_originator, char *p_name, UINT8 service_id, 3659 UINT16 sec_level, UINT16 psm, UINT32 mx_proto_id, 3660 UINT32 mx_chan_id); 3661 3662 /******************************************************************************* 3663 ** 3664 ** Function BTM_SetOutService 3665 ** 3666 ** Description This function is called to set the service for 3667 ** outgoing connection. 3668 ** 3669 ** Returns void 3670 ** 3671 *******************************************************************************/ 3672 BTM_API extern void BTM_SetOutService(BD_ADDR bd_addr, UINT8 service_id, UINT32 mx_chan_id); 3673 3674 /******************************************************************************* 3675 ** 3676 ** Function BTM_SecClrService 3677 ** 3678 ** Description Removes specified service record(s) from the security database. 3679 ** All service records with the specified name are removed. 3680 ** Typically used only by devices with limited RAM so that it can 3681 ** reuse an old security service record. 3682 ** records (except SDP). 3683 ** 3684 ** Returns Number of records that were freed. 3685 ** 3686 *******************************************************************************/ 3687 BTM_API extern UINT8 BTM_SecClrService (UINT8 service_id); 3688 3689 /******************************************************************************* 3690 ** 3691 ** Function BTM_SecClrUCDService 3692 ** 3693 ** Description 3694 ** 3695 ** Parameters Service ID - Id of the service to remove. ('0' removes all service 3696 ** records. 3697 ** 3698 ** Returns Number of records that were freed. 3699 ** 3700 *******************************************************************************/ 3701 BTM_API extern UINT8 BTM_SecClrUCDService (UINT8 service_id); 3702 3703 /******************************************************************************* 3704 ** 3705 ** Function BTM_SecAddDevice 3706 ** 3707 ** Description Add/modify device. This function will be normally called 3708 ** during host startup to restore all required information 3709 ** stored in the NVRAM. 3710 ** dev_class, bd_name, link_key, and features are NULL if unknown 3711 ** 3712 ** Returns TRUE if added OK, else FALSE 3713 ** 3714 *******************************************************************************/ 3715 BTM_API extern BOOLEAN BTM_SecAddDevice (BD_ADDR bd_addr, DEV_CLASS dev_class, 3716 BD_NAME bd_name, BD_FEATURES features, 3717 UINT32 trusted_mask[], LINK_KEY link_key, 3718 UINT8 key_type, tBTM_IO_CAP io_cap); 3719 3720 3721 /******************************************************************************* 3722 ** 3723 ** Function BTM_SecDeleteDevice 3724 ** 3725 ** Description Free resources associated with the device. 3726 ** 3727 ** Returns TRUE if rmoved OK, FALSE if not found 3728 ** 3729 *******************************************************************************/ 3730 BTM_API extern BOOLEAN BTM_SecDeleteDevice (BD_ADDR bd_addr); 3731 3732 3733 /******************************************************************************* 3734 ** 3735 ** Function BTM_SecUseMasterLinkKey 3736 ** 3737 ** Description This function is called to tell master of the piconet to 3738 ** switch to master link key 3739 ** 3740 ** Returns BTM_SUCCESS if command is successully initiated 3741 ** 3742 *******************************************************************************/ 3743 BTM_API extern tBTM_STATUS BTM_SecUseMasterLinkKey (BOOLEAN use_master_key); 3744 3745 3746 /******************************************************************************* 3747 ** 3748 ** Function BTM_SetMasterKeyCompCback 3749 ** 3750 ** Description This function is called to register for the master key complete 3751 ** status event. 3752 ** 3753 ** Parameters: mkey_cback - callback registered with the security manager 3754 ** 3755 ** Returns void 3756 ** 3757 *******************************************************************************/ 3758 BTM_API extern void BTM_SetMasterKeyCompCback(tBTM_MKEY_CALLBACK *mkey_cback ); 3759 3760 3761 /******************************************************************************* 3762 ** 3763 ** Function BTM_SecGetDeviceLinkKey 3764 ** 3765 ** Description This function is called to obtain link key for the device 3766 ** it returns BTM_SUCCESS if link key is available, or 3767 ** BTM_UNKNOWN_ADDR if Security Manager does not know about 3768 ** the device or device record does not contain link key info 3769 ** 3770 ** Returns BTM_SUCCESS if successful, otherwise error code 3771 ** 3772 *******************************************************************************/ 3773 BTM_API extern tBTM_STATUS BTM_SecGetDeviceLinkKey (BD_ADDR bd_addr, 3774 LINK_KEY link_key); 3775 3776 3777 /******************************************************************************* 3778 ** 3779 ** Function BTM_PINCodeReply 3780 ** 3781 ** Description This function is called after Security Manager submitted 3782 ** PIN code request to the UI. 3783 ** 3784 ** Parameters: bd_addr - Address of the device for which PIN was requested 3785 ** res - result of the operation BTM_SUCCESS if success 3786 ** pin_len - length in bytes of the PIN Code 3787 ** p_pin - pointer to array with the PIN Code 3788 ** trusted_mask - bitwise OR of trusted services (array of UINT32) 3789 ** 3790 ** Returns void 3791 ** 3792 *******************************************************************************/ 3793 BTM_API extern void BTM_PINCodeReply (BD_ADDR bd_addr, UINT8 res, UINT8 pin_len, 3794 UINT8 *p_pin, UINT32 trusted_mask[]); 3795 3796 3797 /******************************************************************************* 3798 ** 3799 ** Function BTM_DeviceAuthorized 3800 ** 3801 ** Description This function is called after Security Manager submitted 3802 ** authorization request to the UI. 3803 ** 3804 ** Parameters: bd_addr - Address of the device for which PIN was requested 3805 ** res - result of the operation BTM_SUCCESS if success 3806 ** 3807 ** Returns void 3808 ** 3809 *******************************************************************************/ 3810 BTM_API extern void BTM_DeviceAuthorized (BD_ADDR bd_addr, UINT8 res, 3811 UINT32 trusted_mask[]); 3812 3813 3814 /******************************************************************************* 3815 ** 3816 ** Function BTM_SecBond 3817 ** 3818 ** Description This function is called to perform bonding with peer device. 3819 ** 3820 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3821 ** 3822 *******************************************************************************/ 3823 BTM_API extern tBTM_STATUS BTM_SecBond (BD_ADDR bd_addr, UINT8 pin_len, UINT8 *p_pin, UINT32 trusted_mask[]); 3824 3825 /******************************************************************************* 3826 ** 3827 ** Function BTM_SecBondCancel 3828 ** 3829 ** Description This function is called to cancel ongoing bonding process 3830 ** with peer device. 3831 ** 3832 ** Returns BTM_CMD_STARTED if successfully initiated, otherwise error 3833 ** 3834 *******************************************************************************/ 3835 BTM_API extern tBTM_STATUS BTM_SecBondCancel (BD_ADDR bd_addr); 3836 3837 /******************************************************************************* 3838 ** 3839 ** Function BTM_SetEncryption 3840 ** 3841 ** Description This function is called to ensure that connection is 3842 ** encrypted. Should be called only on an open connection. 3843 ** Typically only needed for connections that first want to 3844 ** bring up unencrypted links, then later encrypt them. 3845 ** 3846 ** Parameters: bd_addr - Address of the peer device 3847 ** p_callback - Pointer to callback function called if 3848 ** this function returns PENDING after required 3849 ** procedures are completed. Can be set to NULL 3850 ** if status is not desired. 3851 ** p_ref_data - pointer to any data the caller wishes to receive 3852 ** in the callback function upon completion. 3853 * can be set to NULL if not used. 3854 ** 3855 ** Returns BTM_SUCCESS - already encrypted 3856 ** BTM_PENDING - command will be returned in the callback 3857 ** BTM_WRONG_MODE- connection not up. 3858 ** BTM_BUSY - security procedures are currently active 3859 ** BTM_MODE_UNSUPPORTED - if security manager not linked in. 3860 ** 3861 *******************************************************************************/ 3862 BTM_API extern tBTM_STATUS BTM_SetEncryption (BD_ADDR bd_addr, tBTM_SEC_CBACK *p_callback, 3863 void *p_ref_data); 3864 3865 /******************************************************************************* 3866 ** 3867 ** Function BTM_ConfirmReqReply 3868 ** 3869 ** Description This function is called to confirm the numeric value for 3870 ** Simple Pairing in response to BTM_SP_CFM_REQ_EVT 3871 ** 3872 ** Parameters: res - result of the operation BTM_SUCCESS if success 3873 ** bd_addr - Address of the peer device 3874 ** 3875 *******************************************************************************/ 3876 BTM_API extern void BTM_ConfirmReqReply(tBTM_STATUS res, BD_ADDR bd_addr); 3877 3878 /******************************************************************************* 3879 ** 3880 ** Function BTM_PasskeyReqReply 3881 ** 3882 ** Description This function is called to provide the passkey for 3883 ** Simple Pairing in response to BTM_SP_KEY_REQ_EVT 3884 ** 3885 ** Parameters: res - result of the operation BTM_SUCCESS if success 3886 ** bd_addr - Address of the peer device 3887 ** passkey - numeric value in the range of 0 - 999999(0xF423F). 3888 ** 3889 *******************************************************************************/ 3890 BTM_API extern void BTM_PasskeyReqReply(tBTM_STATUS res, BD_ADDR bd_addr, UINT32 passkey); 3891 3892 /******************************************************************************* 3893 ** 3894 ** Function BTM_SendKeypressNotif 3895 ** 3896 ** Description This function is used during the passkey entry model 3897 ** by a device with KeyboardOnly IO capabilities 3898 ** (very likely to be a HID Device). 3899 ** It is called by a HID Device to inform the remote device when 3900 ** a key has been entered or erased. 3901 ** 3902 ** Parameters: bd_addr - Address of the peer device 3903 ** type - notification type 3904 ** 3905 *******************************************************************************/ 3906 BTM_API extern void BTM_SendKeypressNotif(BD_ADDR bd_addr, tBTM_SP_KEY_TYPE type); 3907 3908 /******************************************************************************* 3909 ** 3910 ** Function BTM_IoCapRsp 3911 ** 3912 ** Description This function is called in response to BTM_SP_IO_REQ_EVT 3913 ** When the event data io_req.oob_data is set to BTM_OOB_UNKNOWN 3914 ** by the tBTM_SP_CALLBACK implementation, this function is 3915 ** called to provide the actual response 3916 ** 3917 ** Parameters: bd_addr - Address of the peer device 3918 ** io_cap - The IO capability of local device. 3919 ** oob - BTM_OOB_NONE or BTM_OOB_PRESENT. 3920 ** auth_req- MITM protection required or not. 3921 ** 3922 *******************************************************************************/ 3923 BTM_API extern void BTM_IoCapRsp(BD_ADDR bd_addr, tBTM_IO_CAP io_cap, 3924 tBTM_OOB_DATA oob, tBTM_AUTH_REQ auth_req); 3925 3926 /******************************************************************************* 3927 ** 3928 ** Function BTM_ReadLocalOobData 3929 ** 3930 ** Description This function is called to read the local OOB data from 3931 ** LM 3932 ** 3933 *******************************************************************************/ 3934 BTM_API extern tBTM_STATUS BTM_ReadLocalOobData(void); 3935 3936 /******************************************************************************* 3937 ** 3938 ** Function BTM_RemoteOobDataReply 3939 ** 3940 ** Description This function is called to provide the remote OOB data for 3941 ** Simple Pairing in response to BTM_SP_RMT_OOB_EVT 3942 ** 3943 ** Parameters: bd_addr - Address of the peer device 3944 ** c - simple pairing Hash C. 3945 ** r - simple pairing Randomizer C. 3946 ** 3947 *******************************************************************************/ 3948 BTM_API extern void BTM_RemoteOobDataReply(tBTM_STATUS res, BD_ADDR bd_addr, BT_OCTET16 c, BT_OCTET16 r); 3949 3950 /******************************************************************************* 3951 ** 3952 ** Function BTM_BuildOobData 3953 ** 3954 ** Description This function is called to build the OOB data payload to 3955 ** be sent over OOB (non-Bluetooth) link 3956 ** 3957 ** Parameters: p_data - the location for OOB data 3958 ** max_len - p_data size. 3959 ** c - simple pairing Hash C. 3960 ** r - simple pairing Randomizer C. 3961 ** name_len- 0, local device name would not be included. 3962 ** otherwise, the local device name is included for 3963 ** up to this specified length 3964 ** 3965 ** Returns Number of bytes in p_data. 3966 ** 3967 *******************************************************************************/ 3968 BTM_API extern UINT16 BTM_BuildOobData(UINT8 *p_data, UINT16 max_len, BT_OCTET16 c, 3969 BT_OCTET16 r, UINT8 name_len); 3970 3971 /******************************************************************************* 3972 ** 3973 ** Function BTM_ReadOobData 3974 ** 3975 ** Description This function is called to parse the OOB data payload 3976 ** received over OOB (non-Bluetooth) link 3977 ** 3978 ** Parameters: p_data - the location for OOB data 3979 ** eir_tag - The associated EIR tag to read the data. 3980 ** *p_len(output) - the length of the data with the given tag. 3981 ** 3982 ** Returns the beginning of the data with the given tag. 3983 ** NULL, if the tag is not found. 3984 ** 3985 *******************************************************************************/ 3986 BTM_API extern UINT8 * BTM_ReadOobData(UINT8 *p_data, UINT8 eir_tag, UINT8 *p_len); 3987 3988 /******************************************************************************* 3989 ** 3990 ** Function BTM_SecReadDevName 3991 ** 3992 ** Description Looks for the device name in the security database for the 3993 ** specified BD address. 3994 ** 3995 ** Returns Pointer to the name or NULL 3996 ** 3997 *******************************************************************************/ 3998 BTM_API extern char *BTM_SecReadDevName (BD_ADDR bd_addr); 3999 4000 4001 /***************************************************************************** 4002 ** POWER MANAGEMENT FUNCTIONS 4003 *****************************************************************************/ 4004 /******************************************************************************* 4005 ** 4006 ** Function BTM_PmRegister 4007 ** 4008 ** Description register or deregister with power manager 4009 ** 4010 ** Returns BTM_SUCCESS if successful, 4011 ** BTM_NO_RESOURCES if no room to hold registration 4012 ** BTM_ILLEGAL_VALUE 4013 ** 4014 *******************************************************************************/ 4015 BTM_API extern tBTM_STATUS BTM_PmRegister (UINT8 mask, UINT8 *p_pm_id, 4016 tBTM_PM_STATUS_CBACK *p_cb); 4017 4018 4019 /******************************************************************************* 4020 ** 4021 ** Function BTM_SetPowerMode 4022 ** 4023 ** Description store the mode in control block or 4024 ** alter ACL connection behavior. 4025 ** 4026 ** Returns BTM_SUCCESS if successful, 4027 ** BTM_UNKNOWN_ADDR if bd addr is not active or bad 4028 ** 4029 *******************************************************************************/ 4030 BTM_API extern tBTM_STATUS BTM_SetPowerMode (UINT8 pm_id, BD_ADDR remote_bda, 4031 tBTM_PM_PWR_MD *p_mode); 4032 4033 4034 /******************************************************************************* 4035 ** 4036 ** Function BTM_ReadPowerMode 4037 ** 4038 ** Description This returns the current mode for a specific 4039 ** ACL connection. 4040 ** 4041 ** Input Param remote_bda - device address of desired ACL connection 4042 ** 4043 ** Output Param p_mode - address where the current mode is copied into. 4044 ** BTM_ACL_MODE_NORMAL 4045 ** BTM_ACL_MODE_HOLD 4046 ** BTM_ACL_MODE_SNIFF 4047 ** BTM_ACL_MODE_PARK 4048 ** (valid only if return code is BTM_SUCCESS) 4049 ** 4050 ** Returns BTM_SUCCESS if successful, 4051 ** BTM_UNKNOWN_ADDR if bd addr is not active or bad 4052 ** 4053 *******************************************************************************/ 4054 BTM_API extern tBTM_STATUS BTM_ReadPowerMode (BD_ADDR remote_bda, 4055 tBTM_PM_MODE *p_mode); 4056 4057 /******************************************************************************* 4058 ** 4059 ** Function BTM_SetSsrParams 4060 ** 4061 ** Description This sends the given SSR parameters for the given ACL 4062 ** connection if it is in ACTIVE mode. 4063 ** 4064 ** Input Param remote_bda - device address of desired ACL connection 4065 ** max_lat - maximum latency (in 0.625ms)(0-0xFFFE) 4066 ** min_rmt_to - minimum remote timeout 4067 ** min_loc_to - minimum local timeout 4068 ** 4069 ** 4070 ** Returns BTM_SUCCESS if the HCI command is issued successful, 4071 ** BTM_UNKNOWN_ADDR if bd addr is not active or bad 4072 ** BTM_CMD_STORED if the command is stored 4073 ** 4074 *******************************************************************************/ 4075 BTM_API extern tBTM_STATUS BTM_SetSsrParams (BD_ADDR remote_bda, UINT16 max_lat, 4076 UINT16 min_rmt_to, UINT16 min_loc_to); 4077 4078 /******************************************************************************* 4079 ** 4080 ** Function BTM_IsPowerManagerOn 4081 ** 4082 ** Description This function is called to check if power manager is included. 4083 ** in the BTE version. 4084 ** 4085 ** Returns TRUE if power manager is compiled in, otherwise FALSE. 4086 ** 4087 *******************************************************************************/ 4088 BTM_API extern BOOLEAN BTM_IsPowerManagerOn (void); 4089 4090 4091 /******************************************************************************* 4092 ** 4093 ** Function BTM_GetHCIConnHandle 4094 ** 4095 ** Description This function is called to get the handle for an ACL connection 4096 ** to a specific remote BD Address. 4097 ** 4098 ** Returns the handle of the connection, or 0xFFFF if none. 4099 ** 4100 *******************************************************************************/ 4101 BTM_API extern UINT16 BTM_GetHCIConnHandle (BD_ADDR remote_bda); 4102 4103 4104 /******************************************************************************* 4105 ** 4106 ** Function BTM_ReadStoredLinkKey 4107 ** 4108 ** Description This function is called to obtain link key for the specified 4109 ** device from the NVRAM storage attached to the Bluetooth 4110 ** controller. 4111 ** 4112 ** Parameters: bd_addr - Address of the device 4113 ** p_cb - Call back function to be called to return 4114 ** the results 4115 ** 4116 *******************************************************************************/ 4117 BTM_API extern tBTM_STATUS BTM_ReadStoredLinkKey (BD_ADDR bd_addr, tBTM_CMPL_CB *p_cb); 4118 4119 4120 /******************************************************************************* 4121 ** 4122 ** Function BTM_WriteStoredLinkKey 4123 ** 4124 ** Description This function is called to write link keys for the specified 4125 ** device addresses to the NVRAM storage attached to the Bluetooth 4126 ** controller. 4127 ** 4128 ** Parameters: num_keys - Number of link keys 4129 ** bd_addr - Addresses of the devices 4130 ** link_key - Link Keys to be stored 4131 ** p_cb - Call back function to be called to return 4132 ** the results 4133 ** 4134 *******************************************************************************/ 4135 BTM_API extern tBTM_STATUS BTM_WriteStoredLinkKey (UINT8 num_keys, 4136 BD_ADDR *bd_addr, 4137 LINK_KEY *link_key, 4138 tBTM_CMPL_CB *p_cb); 4139 4140 4141 /******************************************************************************* 4142 ** 4143 ** Function BTM_DeleteStoredLinkKey 4144 ** 4145 ** Description This function is called to delete link key for the specified 4146 ** device addresses from the NVRAM storage attached to the Bluetooth 4147 ** controller. 4148 ** 4149 ** Parameters: bd_addr - Addresses of the devices 4150 ** p_cb - Call back function to be called to return 4151 ** the results 4152 ** 4153 *******************************************************************************/ 4154 BTM_API extern tBTM_STATUS BTM_DeleteStoredLinkKey(BD_ADDR bd_addr, tBTM_CMPL_CB *p_cb); 4155 4156 /******************************************************************************* 4157 ** 4158 ** Function BTM_WriteEIR 4159 ** 4160 ** Description This function is called to write EIR data to controller. 4161 ** 4162 ** Parameters p_buff - allocated HCI command buffer including extended 4163 ** inquriry response 4164 ** 4165 ** Returns BTM_SUCCESS - if successful 4166 ** BTM_MODE_UNSUPPORTED - if local device cannot support it 4167 ** 4168 *******************************************************************************/ 4169 BTM_API extern tBTM_STATUS BTM_WriteEIR( BT_HDR * p_buff ); 4170 4171 /******************************************************************************* 4172 ** 4173 ** Function BTM_CheckEirData 4174 ** 4175 ** Description This function is called to get EIR data from significant part. 4176 ** 4177 ** Parameters p_eir - pointer of EIR significant part 4178 ** type - finding EIR data type 4179 ** p_length - return the length of EIR data 4180 ** 4181 ** Returns pointer of EIR data 4182 ** 4183 *******************************************************************************/ 4184 BTM_API extern UINT8 *BTM_CheckEirData( UINT8 *p_eir, UINT8 type, UINT8 *p_length ); 4185 4186 /******************************************************************************* 4187 ** 4188 ** Function BTM_HasEirService 4189 ** 4190 ** Description This function is called to know if UUID in bit map of UUID. 4191 ** 4192 ** Parameters p_eir_uuid - bit map of UUID list 4193 ** uuid16 - UUID 16-bit 4194 ** 4195 ** Returns TRUE - if found 4196 ** FALSE - if not found 4197 ** 4198 *******************************************************************************/ 4199 BTM_API extern BOOLEAN BTM_HasEirService( UINT32 *p_eir_uuid, UINT16 uuid16 ); 4200 4201 /******************************************************************************* 4202 ** 4203 ** Function BTM_HasInquiryEirService 4204 ** 4205 ** Description This function is called to know if UUID in bit map of UUID list. 4206 ** 4207 ** Parameters p_results - inquiry results 4208 ** uuid16 - UUID 16-bit 4209 ** 4210 ** Returns BTM_EIR_FOUND - if found 4211 ** BTM_EIR_NOT_FOUND - if not found and it is complete list 4212 ** BTM_EIR_UNKNOWN - if not found and it is not complete list 4213 ** 4214 *******************************************************************************/ 4215 BTM_API extern tBTM_EIR_SEARCH_RESULT BTM_HasInquiryEirService( tBTM_INQ_RESULTS *p_results, 4216 UINT16 uuid16 ); 4217 4218 /******************************************************************************* 4219 ** 4220 ** Function BTM_AddEirService 4221 ** 4222 ** Description This function is called to add a service in bit map of UUID list. 4223 ** 4224 ** Parameters p_eir_uuid - bit mask of UUID list for EIR 4225 ** uuid16 - UUID 16-bit 4226 ** 4227 ** Returns None 4228 ** 4229 *******************************************************************************/ 4230 BTM_API extern void BTM_AddEirService( UINT32 *p_eir_uuid, UINT16 uuid16 ); 4231 4232 /******************************************************************************* 4233 ** 4234 ** Function BTM_RemoveEirService 4235 ** 4236 ** Description This function is called to remove a service in bit map of UUID list. 4237 ** 4238 ** Parameters p_eir_uuid - bit mask of UUID list for EIR 4239 ** uuid16 - UUID 16-bit 4240 ** 4241 ** Returns None 4242 ** 4243 *******************************************************************************/ 4244 BTM_API extern void BTM_RemoveEirService( UINT32 *p_eir_uuid, UINT16 uuid16 ); 4245 4246 /******************************************************************************* 4247 ** 4248 ** Function BTM_GetEirSupportedServices 4249 ** 4250 ** Description This function is called to get UUID list from bit map of UUID list. 4251 ** 4252 ** Parameters p_eir_uuid - bit mask of UUID list for EIR 4253 ** p - reference of current pointer of EIR 4254 ** max_num_uuid16 - max number of UUID can be written in EIR 4255 ** num_uuid16 - number of UUID have been written in EIR 4256 ** 4257 ** Returns BTM_EIR_MORE_16BITS_UUID_TYPE, if it has more than max 4258 ** BTM_EIR_COMPLETE_16BITS_UUID_TYPE, otherwise 4259 ** 4260 *******************************************************************************/ 4261 BTM_API extern UINT8 BTM_GetEirSupportedServices( UINT32 *p_eir_uuid, UINT8 **p, 4262 UINT8 max_num_uuid16, UINT8 *p_num_uuid16); 4263 4264 /******************************************************************************* 4265 ** 4266 ** Function BTM_GetEirUuidList 4267 ** 4268 ** Description This function parses EIR and returns UUID list. 4269 ** 4270 ** Parameters p_eir - EIR 4271 ** uuid_size - LEN_UUID_16, LEN_UUID_32, LEN_UUID_128 4272 ** p_num_uuid - return number of UUID in found list 4273 ** p_uuid_list - return UUID 16-bit list 4274 ** max_num_uuid - maximum number of UUID to be returned 4275 ** 4276 ** Returns 0 - if not found 4277 ** BTM_EIR_COMPLETE_16BITS_UUID_TYPE 4278 ** BTM_EIR_MORE_16BITS_UUID_TYPE 4279 ** BTM_EIR_COMPLETE_32BITS_UUID_TYPE 4280 ** BTM_EIR_MORE_32BITS_UUID_TYPE 4281 ** BTM_EIR_COMPLETE_128BITS_UUID_TYPE 4282 ** BTM_EIR_MORE_128BITS_UUID_TYPE 4283 ** 4284 *******************************************************************************/ 4285 BTM_API extern UINT8 BTM_GetEirUuidList( UINT8 *p_eir, UINT8 uuid_size, UINT8 *p_num_uuid, 4286 UINT8 *p_uuid_list, UINT8 max_num_uuid); 4287 4288 /******************************************************************************* 4289 ** 4290 ** Function BTM_SyncStack 4291 ** 4292 ** Description For Dual-Stack support. Called to initiate switching to/from 4293 ** main stack (running on phone baseband) to mm stack (light 4294 ** stack running on multi-media chip) 4295 ** 4296 ** Parameters sync_dir: BTM_SW_BB_TO_MM: switch from BB to MM stack 4297 ** BTM_SW_MM_TO_BB: switch from MM to BB stack 4298 ** BTM_SW_RESYNC: resync MM and BB stacks 4299 ** 4300 ** p_sync_cback: callback function for event notification 4301 ** Returns 4302 ** 4303 *******************************************************************************/ 4304 BTM_API extern tBTM_STATUS BTM_SyncStack(tBTM_SW_DIR sync_dir, tBTM_SYNC_STACK_CBACK p_sync_cback); 4305 4306 /******************************************************************************* 4307 ** 4308 ** Function BTM_SyncBtaRsp 4309 ** 4310 ** Description For Dual-Stack support. Called to indicate that upper layers 4311 ** (e.g. BTA or application) have completed synchronizing bta/app 4312 ** specific layers for switching. 4313 ** 4314 ** Called in response to 'BTM_SYNC_BTA_EVT' 4315 ** 4316 ** Parameters status: BTM_SUCESS: bta/app successfully synchronized 4317 ** otherwise: sync was unsuccessfule. Abort switch. 4318 ** 4319 ** p_btm_sync_info: information from bta/app that will be needed 4320 ** by BTE (avdt and l2cap) for switching. 4321 ** 4322 ** Returns void 4323 ** 4324 *******************************************************************************/ 4325 BTM_API extern void BTM_SyncBtaRsp(tBTM_STATUS status, tBTM_SYNC_INFO *p_btm_sync_info); 4326 4327 /******************************************************************************* 4328 ** 4329 ** Function BTM_OpenUIPC 4330 ** 4331 ** Description For Dual-Stack support. Called to open UIPC between 4332 ** main stack (running on phone baseband) to embedded light stack 4333 ** (running on Multimedia or Bluetooth Controller chip) 4334 ** 4335 ** Parameters sync_dir: BTM_SW_BB_TO_MM: switch from BB to MM stack 4336 ** BTM_SW_BB_TO_BTC:switch from BB to BTC stack 4337 ** 4338 ** p_sync_callback: callback function for event notification 4339 ** Returns 4340 ** 4341 *******************************************************************************/ 4342 BTM_API extern tBTM_STATUS BTM_OpenUIPC(tBTM_SW_DIR sync_dir, tBTM_SYNC_STACK_CBACK p_sync_callback); 4343 4344 /******************************************************************************* 4345 ** 4346 ** Function BTM_CloseUIPC 4347 ** 4348 ** Description For Dual-Stack support. Called to close UIPC between 4349 ** main stack (running on phone baseband) to embedded light stack 4350 ** (running on Multimedia or Bluetooth Controller chip) 4351 ** 4352 ** Parameters 4353 ** p_sync_callback: callback function for event notification 4354 ** Returns 4355 ** 4356 *******************************************************************************/ 4357 BTM_API extern tBTM_STATUS BTM_CloseUIPC(tBTM_SYNC_STACK_CBACK p_sync_callback); 4358 4359 /******************************************************************************* 4360 ** 4361 ** Function BTM_IpcSend 4362 ** 4363 ** Description For Dual-Stack support. Called to send ipc messages from 4364 ** full stack to lite stack and vice-versa. This API is 4365 ** typically called by bta layers e.g. bta_av. 4366 ** 4367 ** 4368 ** Parameters len: Length of the buffer in the ipc message 4369 ** 4370 ** buffer: Pointer to the buffer to be passed in the IPC message 4371 ** 4372 ** Returns void 4373 ** 4374 *******************************************************************************/ 4375 BTM_API extern void BTM_IpcSend(UINT16 len, UINT8* buffer); 4376 4377 /******************************************************************************* 4378 ** 4379 ** Function BTM_IpcSendBuf 4380 ** 4381 ** Description For Dual-Stack support. Called to send ipc messages from 4382 ** full stack to lite stack and vice-versa. This API is 4383 ** typically called by bta layers e.g. bta_av_sync. 4384 ** 4385 ** 4386 ** Parameters p_buf: Pointer to the buffer to be passed in the IPC message 4387 ** 4388 ** Returns void 4389 ** 4390 *******************************************************************************/ 4391 BTM_API extern void BTM_IpcSendBuf(BT_HDR* p_buf); 4392 4393 /******************************************************************************* 4394 ** 4395 ** Function BTM_RegIpcEvtHandler 4396 ** 4397 ** Description registers the DM provided handler for IPC events 4398 ** 4399 ** 4400 ** Returns void 4401 ** 4402 *******************************************************************************/ 4403 BTM_API extern void BTM_RegIpcEvtHandler(tBTM_IPC_EVT_CBACK *p_cback); 4404 4405 /******************************************************************************* 4406 ** 4407 ** Function BTM_RegRTIpcEvtHandler 4408 ** 4409 ** Description registers the RT(Audio Routing) provided handler for IPC events 4410 ** 4411 ** 4412 ** Returns void 4413 ** 4414 *******************************************************************************/ 4415 BTM_API extern void BTM_RegRTIpcEvtHandler(tBTM_IPC_EVT_CBACK *p_cback); 4416 4417 /***************************************************************************** 4418 ** N2BT 4419 *****************************************************************************/ 4420 4421 /* Data callback for N2BT */ 4422 typedef void (tBTM_N2BT_DATA_CB) (BD_ADDR bd_addr, UINT16 handle, UINT8 *p_data, UINT16 datalen); 4423 4424 /******************************************************************************* 4425 ** 4426 ** Function BTM_N2BtAcquire 4427 ** 4428 ** Description Put controller into acquisition mode 4429 ** 4430 ** Returns void 4431 ** 4432 *******************************************************************************/ 4433 BTM_API extern void BTM_N2BtAcquire(BD_ADDR bd_addr, UINT16 timeout, 4434 UINT8 freq, UINT8 src_addrlen, UINT8 sensor_flags, 4435 UINT8 sensor_type, UINT8 sensor_clk_accuracy, 4436 UINT16 add_rx_window, UINT16 init_crc, 4437 UINT32 ac_low, UINT32 ac_high, UINT16 pkt_hdr, 4438 UINT16 list_dur, UINT16 list_int, 4439 UINT8 oor_missed_pkts, tBTM_VSC_CMPL_CB *p_cb, 4440 tBTM_N2BT_DATA_CB *p_data_cback); 4441 4442 /******************************************************************************* 4443 ** 4444 ** Function BTM_N2BtDisconnect 4445 ** 4446 ** Description Disconnects all N2BT devices 4447 ** 4448 ** Returns void 4449 ** 4450 *******************************************************************************/ 4451 BTM_API extern void BTM_N2BtDisconnect(void); 4452 4453 4454 /******************************************************************************* 4455 ** 4456 ** Function BTM_ConfigI2SPCM 4457 ** 4458 ** Description This function sends VSC Write_I2SPCM_Interface_Param 4459 ** as to the specified codec_type. 4460 ** 4461 ** 4462 ** Parameter codec_type: codec_type to be used for sco connection. 4463 ** role: master or slave role 4464 ** sample_rate: sampling rate 4465 ** clock_rate:clock rate 128K to 2048K 4466 ** 4467 ** 4468 ** Returns BTM_SUCCESS if the successful. 4469 ** BTM_ILLEGAL_VALUE: wrong codec type 4470 ** 4471 *******************************************************************************/ 4472 BTM_API extern tBTM_STATUS BTM_ConfigI2SPCM (tBTM_SCO_CODEC_TYPE codec_type, UINT8 role, UINT8 sample_rate, UINT8 clock_rate); 4473 4474 /***************************************************************************** 4475 ** SCO OVER HCI 4476 *****************************************************************************/ 4477 /******************************************************************************* 4478 ** 4479 ** Function BTM_ConfigScoPath 4480 ** 4481 ** Description This function enable/disable SCO over HCI and registers SCO 4482 ** data callback if SCO over HCI is enabled. 4483 ** 4484 ** Parameter path: SCO or HCI 4485 ** p_sco_data_cb: callback function or SCO data if path is set 4486 ** to transport. 4487 ** p_pcm_param: pointer to the PCM interface parameter. If a NULL 4488 ** pointer is used, PCM parameter maintained in 4489 ** the control block will be used; otherwise update 4490 ** control block value. 4491 ** err_data_rpt: Lisbon feature to enable the erronous data report 4492 ** or not. 4493 ** 4494 ** Returns BTM_SUCCESS if the successful. 4495 ** BTM_NO_RESOURCES: no rsource to start the command. 4496 ** BTM_ILLEGAL_VALUE: invalid callback function pointer. 4497 ** BTM_CMD_STARTED :Command sent. Waiting for command cmpl event. 4498 ** 4499 ** 4500 *******************************************************************************/ 4501 BTM_API extern tBTM_STATUS BTM_ConfigScoPath (tBTM_SCO_ROUTE_TYPE path, 4502 tBTM_SCO_DATA_CB *p_sco_data_cb, 4503 tBTM_SCO_PCM_PARAM *p_pcm_param, 4504 BOOLEAN err_data_rpt); 4505 4506 /******************************************************************************* 4507 ** 4508 ** Function BTM_WriteScoData 4509 ** 4510 ** Description This function write SCO data to a specified instance. The data 4511 ** to be written p_buf needs to carry an offset of 4512 ** HCI_SCO_PREAMBLE_SIZE bytes, and the data length can not 4513 ** exceed BTM_SCO_DATA_SIZE_MAX bytes, whose default value is set 4514 ** to 60 and is configurable. Data longer than the maximum bytes 4515 ** will be truncated. 4516 ** 4517 ** Returns BTM_SUCCESS: data write is successful 4518 ** BTM_ILLEGAL_VALUE: SCO data contains illegal offset value. 4519 ** BTM_SCO_BAD_LENGTH: SCO data length exceeds the max SCO packet 4520 ** size. 4521 ** BTM_NO_RESOURCES: no resources. 4522 ** BTM_UNKNOWN_ADDR: unknown SCO connection handle, or SCO is not 4523 ** routed via HCI. 4524 ** 4525 ** 4526 *******************************************************************************/ 4527 BTM_API extern tBTM_STATUS BTM_WriteScoData (UINT16 sco_inx, BT_HDR *p_buf); 4528 4529 /******************************************************************************* 4530 ** 4531 ** Function BTM_SetARCMode 4532 ** 4533 ** Description Send Audio Routing Control command. 4534 ** 4535 ** Returns void 4536 ** 4537 *******************************************************************************/ 4538 BTM_API extern void BTM_SetARCMode (UINT8 iface, UINT8 arc_mode, tBTM_VSC_CMPL_CB *p_arc_cb); 4539 4540 4541 /******************************************************************************* 4542 ** 4543 ** Function BTM_PCM2Setup_Write 4544 ** 4545 ** Description Send PCM2_Setup write command. 4546 ** 4547 ** Returns void 4548 ** 4549 *******************************************************************************/ 4550 BTM_API extern void BTM_PCM2Setup_Write (BOOLEAN clk_master, tBTM_VSC_CMPL_CB *p_arc_cb); 4551 4552 #ifdef __cplusplus 4553 } 4554 #endif 4555 4556 #endif /* BTM_API_H */ 4557
