1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * this file contains the main Bluetooth Manager (BTM) internal 22 * definitions. 23 * 24 ******************************************************************************/ 25 #ifndef BTM_INT_H 26 #define BTM_INT_H 27 28 #include "bt_target.h" 29 #include "gki.h" 30 #include "hcidefs.h" 31 32 #if RFCOMM_INCLUDED == TRUE 33 #include "rfcdefs.h" 34 #endif 35 36 #include "btm_api.h" 37 38 #if (BLE_INCLUDED == TRUE) 39 #include "btm_ble_int.h" 40 #if (SMP_INCLUDED == TRUE) 41 #include "smp_api.h" 42 #endif 43 #endif 44 45 #if BTM_MAX_LOC_BD_NAME_LEN > 0 46 typedef char tBTM_LOC_BD_NAME[BTM_MAX_LOC_BD_NAME_LEN + 1]; 47 #endif 48 49 #define BTM_ACL_IS_CONNECTED(bda) (btm_bda_to_acl (bda) != NULL) 50 51 /* Definitions for Server Channel Number (SCN) management 52 */ 53 #define BTM_MAX_SCN PORT_MAX_RFC_PORTS 54 55 /* Define masks for supported and exception 2.0 ACL packet types 56 */ 57 #define BTM_ACL_SUPPORTED_PKTS_MASK (HCI_PKT_TYPES_MASK_DM1 | \ 58 HCI_PKT_TYPES_MASK_DH1 | \ 59 HCI_PKT_TYPES_MASK_DM3 | \ 60 HCI_PKT_TYPES_MASK_DH3 | \ 61 HCI_PKT_TYPES_MASK_DM5 | \ 62 HCI_PKT_TYPES_MASK_DH5) 63 64 #define BTM_ACL_EXCEPTION_PKTS_MASK (HCI_PKT_TYPES_MASK_NO_2_DH1 | \ 65 HCI_PKT_TYPES_MASK_NO_3_DH1 | \ 66 HCI_PKT_TYPES_MASK_NO_2_DH3 | \ 67 HCI_PKT_TYPES_MASK_NO_3_DH3 | \ 68 HCI_PKT_TYPES_MASK_NO_2_DH5 | \ 69 HCI_PKT_TYPES_MASK_NO_3_DH5) 70 71 #define BTM_EPR_AVAILABLE(p) ((HCI_ATOMIC_ENCRYPT_SUPPORTED((p)->features) && \ 72 HCI_ATOMIC_ENCRYPT_SUPPORTED(btm_cb.devcb.local_features)) \ 73 ? TRUE : FALSE) 74 75 #define BTM_IS_BRCM_CONTROLLER() (btm_cb.devcb.local_version.manufacturer == LMP_COMPID_BROADCOM) 76 77 78 /* Define the ACL Management control structure 79 */ 80 typedef struct 81 { 82 UINT16 hci_handle; 83 UINT16 pkt_types_mask; 84 UINT16 restore_pkt_types; /* when coming in/out of SCO connection restore the packet types */ 85 UINT16 clock_offset; 86 BD_ADDR remote_addr; 87 DEV_CLASS remote_dc; 88 BD_NAME remote_name; 89 90 UINT16 manufacturer; 91 UINT16 lmp_subversion; 92 UINT16 link_super_tout; 93 BD_FEATURES features; /* Features suported by the device */ 94 UINT8 lmp_version; 95 96 BOOLEAN in_use; 97 UINT8 link_role; 98 BOOLEAN link_up_issued; /* True if busy_level link up has been issued */ 99 100 #define BTM_ACL_SWKEY_STATE_IDLE 0 101 #define BTM_ACL_SWKEY_STATE_MODE_CHANGE 1 102 #define BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF 2 103 #define BTM_ACL_SWKEY_STATE_SWITCHING 3 104 #define BTM_ACL_SWKEY_STATE_ENCRYPTION_ON 4 105 #define BTM_ACL_SWKEY_STATE_IN_PROGRESS 5 106 UINT8 switch_role_state; 107 UINT8 change_key_state; 108 109 #define BTM_ACL_ENCRYPT_STATE_IDLE 0 110 #define BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF 1 /* encryption turning off */ 111 #define BTM_ACL_ENCRYPT_STATE_TEMP_FUNC 2 /* temporarily off for change link key or role switch */ 112 #define BTM_ACL_ENCRYPT_STATE_ENCRYPT_ON 3 /* encryption turning on */ 113 UINT8 encrypt_state; /* overall BTM encryption state */ 114 115 #if BTM_PWR_MGR_INCLUDED == FALSE 116 UINT8 mode; 117 #endif /* BTM_PWR_MGR_INCLUDED */ 118 #if BLE_INCLUDED == TRUE 119 UINT8 is_le_link; 120 #endif 121 122 } tACL_CONN; 123 124 /***************************************************** 125 ** TIMER Definitions 126 ******************************************************/ 127 #define TT_DEV_RESET 1 128 #define TT_DEV_RLN 2 129 #define TT_DEV_RLNKP 4 /* Read Link Policy Settings */ 130 131 /* Define the Device Management control structure 132 */ 133 typedef struct 134 { 135 tBTM_DEV_STATUS_CB *p_dev_status_cb; /* Device status change callback */ 136 tBTM_VS_EVT_CB *p_vend_spec_cb[BTM_MAX_VSE_CALLBACKS]; /* Register for vendor specific events */ 137 138 tBTM_CMPL_CB *p_stored_link_key_cmpl_cb; /* Read/Write/Delete stored link key */ 139 140 TIMER_LIST_ENT reset_timer; 141 tBTM_CMPL_CB *p_reset_cmpl_cb; /* Callback function to be called */ 142 /* when startup of the device is done */ 143 TIMER_LIST_ENT rln_timer; 144 tBTM_CMPL_CB *p_rln_cmpl_cb; /* Callback function to be called when */ 145 /* read local name function complete */ 146 TIMER_LIST_ENT rlinkp_timer; 147 tBTM_CMPL_CB *p_rlinkp_cmpl_cb; /* Callback function to be called when */ 148 /* read link policy function completes */ 149 TIMER_LIST_ENT rssi_timer; 150 tBTM_CMPL_CB *p_rssi_cmpl_cb; /* Callback function to be called when */ 151 /* read rssi function completes */ 152 TIMER_LIST_ENT lnk_quality_timer; 153 tBTM_CMPL_CB *p_lnk_qual_cmpl_cb;/* Callback function to be called when */ 154 /* read link quality function completes */ 155 TIMER_LIST_ENT txpwer_timer; 156 tBTM_CMPL_CB *p_txpwer_cmpl_cb; /* Callback function to be called when */ 157 /* read inq tx power function completes */ 158 159 TIMER_LIST_ENT qossu_timer; 160 tBTM_CMPL_CB *p_qossu_cmpl_cb; /* Callback function to be called when */ 161 /* qos setup function completes */ 162 163 tBTM_ROLE_SWITCH_CMPL switch_role_ref_data; 164 tBTM_CMPL_CB *p_switch_role_cb; /* Callback function to be called when */ 165 /* requested switch role is completed */ 166 167 tBTM_CHANGE_KEY_CMPL chg_link_key_ref_data; 168 tBTM_CMPL_CB *p_chg_link_key_cb; /* Callback function to be called when */ 169 /* change of link key is completed */ 170 171 TIMER_LIST_ENT tx_power_timer; 172 tBTM_CMPL_CB *p_tx_power_cmpl_cb; /* Callback function to be called */ 173 174 BD_ADDR local_addr; /* BD_ADDR of the local device */ 175 tBTM_VERSION_INFO local_version; /* Local Version Information */ 176 BD_FEATURES local_features; /* Local features bit mask */ 177 DEV_CLASS dev_class; /* Local device class */ 178 #if BLE_INCLUDED == TRUE 179 BD_ADDR read_tx_pwr_addr; /* read TX power target address */ 180 181 tBTM_BLE_LOCAL_ID_KEYS id_keys; /* local BLE ID keys */ 182 BT_OCTET16 er; /* BLE encryption key */ 183 184 #if BTM_BLE_CONFORMANCE_TESTING == TRUE 185 BOOLEAN no_disc_if_pair_fail; 186 BOOLEAN enable_test_mac_val; 187 BT_OCTET8 test_mac; 188 BOOLEAN enable_test_local_sign_cntr; 189 UINT32 test_local_sign_cntr; 190 #endif 191 192 193 #endif /* BLE_INCLUDED */ 194 195 #define BTM_DEV_STATE_WAIT_RESET_CMPLT 0 196 #define BTM_DEV_STATE_WAIT_AFTER_RESET 1 197 #define BTM_DEV_STATE_READY 2 198 199 UINT8 state; 200 tBTM_IO_CAP loc_io_caps; /* IO capability of the local device */ 201 BOOLEAN loc_auth_req; /* the auth_req flag */ 202 BD_FEATURES brcm_features; /* Broadcom specific features bit mask */ 203 } tBTM_DEVCB; 204 205 206 /* Define the structures and constants used for inquiry 207 */ 208 209 /* Definitions of limits for inquiries */ 210 #define BTM_PER_INQ_MIN_MAX_PERIOD HCI_PER_INQ_MIN_MAX_PERIOD 211 #define BTM_PER_INQ_MAX_MAX_PERIOD HCI_PER_INQ_MAX_MAX_PERIOD 212 #define BTM_PER_INQ_MIN_MIN_PERIOD HCI_PER_INQ_MIN_MIN_PERIOD 213 #define BTM_PER_INQ_MAX_MIN_PERIOD HCI_PER_INQ_MAX_MIN_PERIOD 214 #define BTM_MAX_INQUIRY_LENGTH HCI_MAX_INQUIRY_LENGTH 215 #define BTM_MIN_INQUIRY_LEN 0x01 216 217 #define BTM_MIN_INQ_TX_POWER -70 218 #define BTM_MAX_INQ_TX_POWER 20 219 220 #if BTM_USE_INQ_RESULTS_FILTER == TRUE 221 typedef struct 222 { 223 UINT32 inq_count; /* Used for determining if a response has already been */ 224 /* received for the current inquiry operation. (We do not */ 225 /* want to flood the caller with multiple responses from */ 226 /* the same device. */ 227 BD_ADDR bd_addr; 228 } tINQ_BDADDR; 229 #endif 230 231 typedef struct 232 { 233 UINT32 time_of_resp; 234 UINT32 inq_count; /* "timestamps" the entry with a particular inquiry count */ 235 /* Used for determining if a response has already been */ 236 /* received for the current inquiry operation. (We do not */ 237 /* want to flood the caller with multiple responses from */ 238 /* the same device. */ 239 tBTM_INQ_INFO inq_info; 240 BOOLEAN in_use; 241 242 #if (BLE_INCLUDED == TRUE) 243 BOOLEAN scan_rsp; 244 #endif 245 } tINQ_DB_ENT; 246 247 248 typedef struct 249 { 250 tBTM_CMPL_CB *p_remname_cmpl_cb; 251 252 #define BTM_EXT_RMT_NAME_TIMEOUT 40 253 254 255 TIMER_LIST_ENT rmt_name_timer_ent; 256 257 UINT16 discoverable_mode; 258 UINT16 connectable_mode; 259 UINT16 page_scan_window; 260 UINT16 page_scan_period; 261 UINT16 inq_scan_window; 262 UINT16 inq_scan_period; 263 UINT16 inq_scan_type; 264 UINT16 page_scan_type; /* current page scan type */ 265 266 BD_ADDR remname_bda; /* Name of bd addr for active remote name request */ 267 #define BTM_RMT_NAME_INACTIVE 0 268 #define BTM_RMT_NAME_EXT 0x1 /* Initiated through API */ 269 #define BTM_RMT_NAME_SEC 0x2 /* Initiated internally by security manager */ 270 #define BTM_RMT_NAME_INQ 0x4 /* Remote name initiated internally by inquiry */ 271 BOOLEAN remname_active; /* State of a remote name request by external API */ 272 273 tBTM_CMPL_CB *p_inq_cmpl_cb; 274 tBTM_INQ_RESULTS_CB *p_inq_results_cb; 275 tBTM_CMPL_CB *p_inqfilter_cmpl_cb; /* Called (if not NULL) after inquiry filter completed */ 276 tBTM_INQ_DB_CHANGE_CB *p_inq_change_cb; /* Inquiry database changed callback */ 277 UINT32 inq_counter; /* Counter incremented each time an inquiry completes */ 278 /* Used for determining whether or not duplicate devices */ 279 /* have responded to the same inquiry */ 280 TIMER_LIST_ENT inq_timer_ent; 281 #if BTM_USE_INQ_RESULTS_FILTER == TRUE 282 tINQ_BDADDR *p_bd_db; /* Pointer to memory that holds bdaddrs */ 283 UINT16 num_bd_entries; /* Number of entries in database */ 284 UINT16 max_bd_entries; /* Maximum number of entries that can be stored */ 285 #endif 286 tINQ_DB_ENT inq_db[BTM_INQ_DB_SIZE]; 287 tBTM_INQ_PARMS inqparms; /* Contains the parameters for the current inquiry */ 288 tBTM_INQUIRY_CMPL inq_cmpl_info; /* Status and number of responses from the last inquiry */ 289 290 UINT16 per_min_delay; /* Current periodic minimum delay */ 291 UINT16 per_max_delay; /* Current periodic maximum delay */ 292 BOOLEAN inqfilt_active; 293 UINT8 pending_filt_complete_event; /* to take care of btm_event_filter_complete corresponding to */ 294 /* inquiry that has been cancelled*/ 295 UINT8 inqfilt_type; /* Contains the inquiry filter type (BD ADDR, COD, or Clear) */ 296 297 #define BTM_INQ_INACTIVE_STATE 0 298 #define BTM_INQ_CLR_FILT_STATE 1 /* Currently clearing the inquiry filter preceeding the inquiry request */ 299 /* (bypassed if filtering is not used) */ 300 #define BTM_INQ_SET_FILT_STATE 2 /* Sets the new filter (or turns off filtering) in this state */ 301 #define BTM_INQ_ACTIVE_STATE 3 /* Actual inquiry or periodic inquiry is in progress */ 302 #define BTM_INQ_REMNAME_STATE 4 /* Remote name requests are active */ 303 304 UINT8 state; /* Current state that the inquiry process is in */ 305 UINT8 inq_active; /* Bit Mask indicating type of inquiry is active */ 306 BOOLEAN no_inc_ssp; /* TRUE, to stop inquiry on incoming SSP */ 307 } tBTM_INQUIRY_VAR_ST; 308 309 /* The MSB of the clock offset field indicates that the offset is valid if TRUE */ 310 #define BTM_CLOCK_OFFSET_VALID 0x8000 311 312 /* Define the structures needed by security management 313 */ 314 315 #define BTM_SEC_INVALID_HANDLE 0xFFFF 316 317 typedef UINT8 *BTM_BD_NAME_PTR; /* Pointer to Device name */ 318 319 /* Security callback is called by this unit when security 320 ** procedures are completed. Parameters are 321 ** BD Address of remote 322 ** Result of the operation 323 */ 324 typedef tBTM_SEC_CBACK tBTM_SEC_CALLBACK; 325 326 typedef void (tBTM_SCO_IND_CBACK) (UINT16 sco_inx) ; 327 328 /* MACROs to convert from SCO packet types mask to ESCO and back */ 329 #define BTM_SCO_PKT_TYPE_MASK ( HCI_PKT_TYPES_MASK_HV1 \ 330 | HCI_PKT_TYPES_MASK_HV2 \ 331 | HCI_PKT_TYPES_MASK_HV3) 332 333 /* Mask defining only the SCO types of an esco packet type */ 334 #define BTM_ESCO_PKT_TYPE_MASK ( HCI_ESCO_PKT_TYPES_MASK_HV1 \ 335 | HCI_ESCO_PKT_TYPES_MASK_HV2 \ 336 | HCI_ESCO_PKT_TYPES_MASK_HV3) 337 338 #define BTM_SCO_2_ESCO(scotype) ((UINT16)(((scotype) & BTM_SCO_PKT_TYPE_MASK) >> 5)) 339 #define BTM_ESCO_2_SCO(escotype) ((UINT16)(((escotype) & BTM_ESCO_PKT_TYPE_MASK) << 5)) 340 341 /* Define masks for supported and exception 2.0 SCO packet types 342 */ 343 #define BTM_SCO_SUPPORTED_PKTS_MASK (HCI_ESCO_PKT_TYPES_MASK_HV1 | \ 344 HCI_ESCO_PKT_TYPES_MASK_HV2 | \ 345 HCI_ESCO_PKT_TYPES_MASK_HV3 | \ 346 HCI_ESCO_PKT_TYPES_MASK_EV3 | \ 347 HCI_ESCO_PKT_TYPES_MASK_EV4 | \ 348 HCI_ESCO_PKT_TYPES_MASK_EV5) 349 350 #define BTM_SCO_EXCEPTION_PKTS_MASK (HCI_ESCO_PKT_TYPES_MASK_NO_2_EV3 | \ 351 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV3 | \ 352 HCI_ESCO_PKT_TYPES_MASK_NO_2_EV5 | \ 353 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV5) 354 355 356 #define BTM_SCO_ROUTE_UNKNOWN 0xff 357 358 /* Define the structure that contains (e)SCO data */ 359 typedef struct 360 { 361 tBTM_ESCO_CBACK *p_esco_cback; /* Callback for eSCO events */ 362 tBTM_ESCO_PARAMS setup; 363 tBTM_ESCO_DATA data; /* Connection complete information */ 364 UINT8 hci_status; 365 } tBTM_ESCO_INFO; 366 367 /* Define the structure used for SCO Management 368 */ 369 typedef struct 370 { 371 tBTM_ESCO_INFO esco; /* Current settings */ 372 #if BTM_SCO_HCI_INCLUDED == TRUE 373 BUFFER_Q xmit_data_q; /* SCO data transmitting queue */ 374 #endif 375 tBTM_SCO_CB *p_conn_cb; /* Callback for when connected */ 376 tBTM_SCO_CB *p_disc_cb; /* Callback for when disconnect */ 377 UINT16 state; /* The state of the SCO link */ 378 UINT16 hci_handle; /* HCI Handle */ 379 BOOLEAN is_orig; /* TRUE if the originator */ 380 BOOLEAN rem_bd_known; /* TRUE if remote BD addr known */ 381 382 } tSCO_CONN; 383 384 /* SCO Management control block */ 385 typedef struct 386 { 387 tBTM_SCO_IND_CBACK *app_sco_ind_cb; 388 #if BTM_SCO_HCI_INCLUDED == TRUE 389 tBTM_SCO_DATA_CB *p_data_cb; /* Callback for SCO data over HCI */ 390 UINT32 xmit_window_size; /* Total SCO window in bytes */ 391 #endif 392 tSCO_CONN sco_db[BTM_MAX_SCO_LINKS]; 393 tBTM_ESCO_PARAMS def_esco_parms; 394 BD_ADDR xfer_addr; 395 UINT16 sco_disc_reason; 396 BOOLEAN esco_supported; /* TRUE if 1.2 cntlr AND supports eSCO links */ 397 tBTM_SCO_TYPE desired_sco_mode; 398 tBTM_SCO_TYPE xfer_sco_type; 399 tBTM_SCO_PCM_PARAM sco_pcm_param; 400 tBTM_SCO_CODEC_TYPE codec_in_use; /* None, CVSD, MSBC, etc. */ 401 #if BTM_SCO_HCI_INCLUDED == TRUE 402 tBTM_SCO_ROUTE_TYPE sco_path; 403 #endif 404 405 } tSCO_CB; 406 407 408 #if BTM_SCO_INCLUDED == TRUE 409 extern void btm_set_sco_ind_cback( tBTM_SCO_IND_CBACK *sco_ind_cb ); 410 extern void btm_accept_sco_link(UINT16 sco_inx, tBTM_ESCO_PARAMS *p_setup, 411 tBTM_SCO_CB *p_conn_cb, tBTM_SCO_CB *p_disc_cb); 412 extern void btm_reject_sco_link(UINT16 sco_inx ); 413 extern void btm_sco_chk_pend_rolechange (UINT16 hci_handle); 414 #else 415 #define btm_accept_sco_link(sco_inx, p_setup, p_conn_cb, p_disc_cb) 416 #define btm_reject_sco_link(sco_inx) 417 #define btm_set_sco_ind_cback(sco_ind_cb) 418 #define btm_sco_chk_pend_rolechange(hci_handle) 419 #endif /* BTM_SCO_INCLUDED */ 420 421 /* 422 ** Define structure for Security Service Record. 423 ** A record exists for each service registered with the Security Manager 424 */ 425 typedef struct 426 { 427 UINT32 mx_proto_id; /* Service runs over this multiplexer protocol */ 428 UINT32 orig_mx_chan_id; /* Channel on the multiplexer protocol */ 429 UINT32 term_mx_chan_id; /* Channel on the multiplexer protocol */ 430 UINT16 psm; /* L2CAP PSM value */ 431 UINT16 security_flags; /* Bitmap of required security features */ 432 UINT8 service_id; /* Passed in authorization callback */ 433 #if (L2CAP_UCD_INCLUDED == TRUE) 434 UINT16 ucd_security_flags; /* Bitmap of required security features for UCD */ 435 #endif 436 #if BTM_SEC_SERVICE_NAME_LEN > 0 437 UINT8 orig_service_name[BTM_SEC_SERVICE_NAME_LEN + 1]; 438 UINT8 term_service_name[BTM_SEC_SERVICE_NAME_LEN + 1]; 439 #endif 440 } tBTM_SEC_SERV_REC; 441 442 #if BLE_INCLUDED == TRUE 443 /* LE Security information of device in Slave Role */ 444 typedef struct 445 { 446 BT_OCTET16 irk; /* peer diverified identity root */ 447 BT_OCTET16 ltk; /* peer long term key */ 448 BT_OCTET16 csrk; /* peer SRK peer device used to secured sign local data */ 449 450 BT_OCTET8 rand; /* random vector for LTK generation */ 451 UINT16 ediv; /* LTK diversifier of this slave device */ 452 UINT16 div; /* local DIV to generate local LTK=d1(ER,DIV,0) and CSRK=d1(ER,DIV,1) */ 453 UINT8 sec_level; /* local pairing security level */ 454 UINT8 key_size; /* key size of the LTK delivered to peer device */ 455 UINT8 srk_sec_level; /* security property of peer SRK for this device */ 456 UINT8 local_csrk_sec_level; /* security property of local CSRK for this device */ 457 458 UINT32 counter; /* peer sign counter for verifying rcv signed cmd */ 459 UINT32 local_counter; /* local sign counter for sending signed write cmd*/ 460 }tBTM_SEC_BLE_KEYS; 461 462 #endif /* BLE_INCLUDED */ 463 464 typedef struct 465 { 466 tBLE_ADDR_TYPE ble_addr_type; /* LE device type: public or random address */ 467 BD_ADDR reconn_addr; /* reconnect address */ 468 BD_ADDR cur_rand_addr; /* current random address */ 469 BD_ADDR static_addr; /* static address */ 470 471 #if SMP_INCLUDED == TRUE 472 tBTM_LE_KEY_TYPE key_type; /* bit mask of valid key types in record */ 473 tBTM_SEC_BLE_KEYS keys; /* LE device security info in slave rode */ 474 #endif 475 } tBTM_SEC_BLE; 476 477 /* 478 ** Define structure for Security Device Record. 479 ** A record exists for each device authenticated with this device 480 */ 481 typedef struct 482 { 483 tBTM_SEC_SERV_REC *p_cur_service; 484 tBTM_SEC_CALLBACK *p_callback; 485 void *p_ref_data; 486 UINT32 timestamp; /* Timestamp of the last connection */ 487 UINT32 trusted_mask[BTM_SEC_SERVICE_ARRAY_SIZE]; /* Bitwise OR of trusted services */ 488 UINT16 hci_handle; /* Handle to connection when exists */ 489 UINT16 clock_offset; /* Latest known clock offset */ 490 BD_ADDR bd_addr; /* BD_ADDR of the device */ 491 DEV_CLASS dev_class; /* DEV_CLASS of the device */ 492 LINK_KEY link_key; /* Device link key */ 493 494 #define BTM_SEC_AUTHORIZED BTM_SEC_FLAG_AUTHORIZED 495 #define BTM_SEC_AUTHENTICATED BTM_SEC_FLAG_AUTHENTICATED 496 #define BTM_SEC_ENCRYPTED BTM_SEC_FLAG_ENCRYPTED 497 #define BTM_SEC_NAME_KNOWN 0x08 498 #define BTM_SEC_LINK_KEY_KNOWN BTM_SEC_FLAG_LKEY_KNOWN 499 #define BTM_SEC_LINK_KEY_AUTHED 0x20 500 #define BTM_SEC_ROLE_SWITCHED 0x40 501 #define BTM_SEC_IN_USE 0x80 502 503 tBTM_BD_NAME sec_bd_name; /* User friendly name of the device. (may be truncated to save space in dev_rec table) */ 504 UINT8 sec_flags; /* Current device security state */ 505 BD_FEATURES features; /* Features suported by the device */ 506 507 #define BTM_SEC_STATE_IDLE 0 508 #define BTM_SEC_STATE_AUTHENTICATING 1 509 #define BTM_SEC_STATE_ENCRYPTING 2 510 #define BTM_SEC_STATE_GETTING_NAME 3 511 #define BTM_SEC_STATE_AUTHORIZING 4 512 #define BTM_SEC_STATE_SWITCHING_ROLE 5 513 #define BTM_SEC_STATE_DISCONNECTING 6 514 #define BTM_SEC_STATE_DELAY_FOR_ENC 7 /* delay to check for encryption to work around controller problems */ 515 516 UINT8 sec_state; /* Operating state */ 517 BOOLEAN is_originator; /* TRUE if device is originating connection */ 518 #if (L2CAP_UCD_INCLUDED == TRUE) 519 BOOLEAN is_ucd; /* TRUE if device is sending or receiving UCD */ 520 /* if incoming security failed, received UCD will be discarded */ 521 #endif 522 BOOLEAN role_master; /* TRUE if current mode is master */ 523 UINT16 security_required; /* Security required for connection */ 524 BOOLEAN link_key_not_sent; /* link key notification has not been sent waiting for name */ 525 UINT8 link_key_type; /* Type of key used in pairing */ 526 BOOLEAN link_key_changed; /* Changed link key during current connection */ 527 528 #define BTM_SM4_UNKNOWN 0x00 529 #define BTM_SM4_KNOWN 0x10 530 #define BTM_SM4_TRUE 0x11 531 #define BTM_SM4_REQ_PEND 0x08 /* set this bit when getting remote features */ 532 #define BTM_SM4_UPGRADE 0x04 /* set this bit when upgrading link key */ 533 #define BTM_SM4_RETRY 0x02 /* set this bit to retry on HCI_ERR_KEY_MISSING or HCI_ERR_LMP_ERR_TRANS_COLLISION */ 534 #define BTM_SM4_DD_ACP 0x20 /* set this bit to indicate peer initiated dedicated bonding */ 535 #define BTM_SM4_CONN_PEND 0x40 /* set this bit to indicate accepting acl conn; to be cleared on btm_acl_created */ 536 UINT8 sm4; /* BTM_SM4_TRUE, if the peer supports SM4 */ 537 tBTM_IO_CAP rmt_io_caps; /* IO capability of the peer device */ 538 BOOLEAN rmt_auth_req; /* the auth_req flag as in the IO caps rsp evt */ 539 540 #if (BLE_INCLUDED == TRUE) 541 UINT8 enc_key_size; /* current link encryption key size */ 542 tBTM_SEC_BLE ble; 543 tBT_DEVICE_TYPE device_type; 544 tBTM_LE_CONN_PRAMS conn_params; 545 #endif 546 547 // btla-specific ++ 548 #if BTM_DISC_DURING_RS == TRUE 549 #define BTM_SEC_RS_NOT_PENDING 0 /* Role Switch not in progress */ 550 #define BTM_SEC_RS_PENDING 1 /* Role Switch in progress */ 551 #define BTM_SEC_DISC_PENDING 2 /* Disconnect is pending */ 552 UINT8 rs_disc_pending; 553 #endif 554 // btla-specific -- 555 } tBTM_SEC_DEV_REC; 556 557 #define BTM_SEC_IS_SM4(sm) ((BOOLEAN)(BTM_SM4_TRUE == ((sm)&BTM_SM4_TRUE))) 558 #define BTM_SEC_IS_SM4_LEGACY(sm) ((BOOLEAN)(BTM_SM4_KNOWN == ((sm)&BTM_SM4_TRUE))) 559 #define BTM_SEC_IS_SM4_UNKNOWN(sm) ((BOOLEAN)(BTM_SM4_UNKNOWN == ((sm)&BTM_SM4_TRUE))) 560 561 562 /* 563 ** Define device configuration structure 564 */ 565 typedef struct 566 { 567 #if BTM_MAX_LOC_BD_NAME_LEN > 0 568 tBTM_LOC_BD_NAME bd_name; /* local Bluetooth device name */ 569 #endif 570 BOOLEAN pin_type; /* TRUE if PIN type is fixed */ 571 UINT8 pin_code_len; /* Bonding information */ 572 PIN_CODE pin_code; /* PIN CODE if pin type is fixed */ 573 BOOLEAN connectable; /* If TRUE page scan should be enabled */ 574 UINT8 def_inq_scan_mode; /* ??? limited/general/none */ 575 } tBTM_CFG; 576 577 #if BTM_PWR_MGR_INCLUDED == TRUE 578 enum 579 { 580 BTM_PM_ST_ACTIVE = BTM_PM_STS_ACTIVE, 581 BTM_PM_ST_HOLD = BTM_PM_STS_HOLD, 582 BTM_PM_ST_SNIFF = BTM_PM_STS_SNIFF, 583 BTM_PM_ST_PARK = BTM_PM_STS_PARK, 584 BTM_PM_ST_PENDING = BTM_PM_STS_PENDING 585 }; 586 typedef UINT8 tBTM_PM_STATE; 587 588 enum 589 { 590 BTM_PM_SET_MODE_EVT, /* Set power mode API is called. */ 591 BTM_PM_UPDATE_EVT, 592 BTM_PM_RD_MODE_EVT /* Read power mode API is called. */ 593 }; 594 typedef UINT8 tBTM_PM_EVENT; 595 596 typedef struct 597 { 598 UINT16 event; 599 UINT16 len; 600 UINT8 link_ind; 601 } tBTM_PM_MSG_DATA; 602 603 typedef struct 604 { 605 UINT8 hci_status; 606 UINT8 mode; 607 UINT16 interval; 608 } tBTM_PM_MD_CHG_DATA; 609 610 typedef struct 611 { 612 UINT8 pm_id; /* the entity that calls SetPowerMode API */ 613 tBTM_PM_PWR_MD *p_pmd; 614 } tBTM_PM_SET_MD_DATA; 615 616 typedef struct 617 { 618 void *p_data; 619 UINT8 link_ind; 620 } tBTM_PM_SM_DATA; 621 622 typedef struct 623 { 624 tBTM_PM_PWR_MD req_mode[BTM_MAX_PM_RECORDS+1]; /* the desired mode and parameters of the connection*/ 625 tBTM_PM_PWR_MD set_mode; /* the mode and parameters sent down to the host controller. */ 626 UINT16 interval; /* the interval from last mode change event. */ 627 #if (BTM_SSR_INCLUDED == TRUE) 628 UINT16 max_lat; /* stored SSR maximum latency */ 629 UINT16 min_rmt_to;/* stored SSR minimum remote timeout */ 630 UINT16 min_loc_to;/* stored SSR minimum local timeout */ 631 #endif 632 tBTM_PM_STATE state; /* contains the current mode of the connection */ 633 BOOLEAN chg_ind; /* a request change indication */ 634 } tBTM_PM_MCB; 635 636 #define BTM_PM_REC_NOT_USED 0 637 typedef struct 638 { 639 tBTM_PM_STATUS_CBACK *cback;/* to notify the registered party of mode change event */ 640 UINT8 mask; /* registered request mask. 0, if this entry is not used */ 641 } tBTM_PM_RCB; 642 #endif /* BTM_PWR_MGR_INCLUDED */ 643 644 enum 645 { 646 BTM_BLI_ACL_UP_EVT, 647 BTM_BLI_ACL_DOWN_EVT, 648 BTM_BLI_PAGE_EVT, 649 BTM_BLI_PAGE_DONE_EVT, 650 BTM_BLI_INQ_EVT, 651 BTM_BLI_INQ_CANCEL_EVT, 652 BTM_BLI_INQ_DONE_EVT 653 }; 654 typedef UINT8 tBTM_BLI_EVENT; 655 656 /* Pairing State */ 657 enum 658 { 659 BTM_PAIR_STATE_IDLE, /* Idle */ 660 BTM_PAIR_STATE_GET_REM_NAME, /* Getting the remote name (to check for SM4) */ 661 BTM_PAIR_STATE_WAIT_PIN_REQ, /* Started authentication, waiting for PIN req (PIN is pre-fetched) */ 662 BTM_PAIR_STATE_WAIT_LOCAL_PIN, /* Waiting for local PIN code */ 663 BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM, /* Waiting user 'yes' to numeric confirmation */ 664 BTM_PAIR_STATE_KEY_ENTRY, /* Key entry state (we are a keyboard) */ 665 BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP, /* Waiting for local response to peer OOB data */ 666 BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS, /* Waiting for local IO capabilities and OOB data */ 667 BTM_PAIR_STATE_INCOMING_SSP, /* Incoming SSP (got peer IO caps when idle) */ 668 BTM_PAIR_STATE_WAIT_AUTH_COMPLETE, /* All done, waiting authentication cpmplete */ 669 BTM_PAIR_STATE_WAIT_DISCONNECT /* Waiting to disconnect the ACL */ 670 }; 671 typedef UINT8 tBTM_PAIRING_STATE; 672 673 #define BTM_PAIR_FLAGS_WE_STARTED_DD 0x01 /* We want to do dedicated bonding */ 674 #define BTM_PAIR_FLAGS_PEER_STARTED_DD 0x02 /* Peer initiated dedicated bonding */ 675 #define BTM_PAIR_FLAGS_DISC_WHEN_DONE 0x04 676 #define BTM_PAIR_FLAGS_PIN_REQD 0x08 /* set this bit when pin_callback is called */ 677 #define BTM_PAIR_FLAGS_PRE_FETCH_PIN 0x10 /* set this bit when pre-fetch pin */ 678 #define BTM_PAIR_FLAGS_REJECTED_CONNECT 0x20 /* set this bit when rejected incoming connection */ 679 680 typedef struct 681 { 682 BOOLEAN is_mux; 683 BD_ADDR bd_addr; 684 UINT16 psm; 685 BOOLEAN is_orig; 686 tBTM_SEC_CALLBACK *p_callback; 687 void *p_ref_data; 688 UINT32 mx_proto_id; 689 UINT32 mx_chan_id; 690 } tBTM_SEC_QUEUE_ENTRY; 691 692 #if (L2CAP_UCD_INCLUDED == TRUE) 693 694 #define CONN_ORIENT_TERM 0x00 /* incoming connection oriented */ 695 #define CONN_ORIENT_ORIG 0x01 /* outgoing connection oriented */ 696 #define CONNLESS_TERM 0x02 /* incoming connectionless */ 697 #define CONNLESS_ORIG 0x03 /* outgoing connectionless */ 698 #define CONNECTION_TYPE_ORIG_MASK 0x01 /* mask for direction */ 699 #define CONNECTION_TYPE_CONNLESS_MASK 0x02 /* mask for connectionless or not */ 700 typedef UINT8 CONNECTION_TYPE; 701 702 #else 703 704 #define CONN_ORIENT_TERM FALSE 705 #define CONN_ORIENT_ORIG TRUE 706 typedef BOOLEAN CONNECTION_TYPE; 707 708 #endif /* (L2CAP_UCD_INCLUDED == TRUE) */ 709 710 /* Define a structure to hold all the BTM data 711 */ 712 713 #define BTM_STATE_BUFFER_SIZE 5 /* size of state buffer */ 714 715 #if (BTM_PCM2_INCLUDED == TRUE) 716 /* Define pcm2_action */ 717 enum 718 { 719 BTM_PCM2_ACT_NONE, 720 BTM_PCM2_ACT_SENT_ARC, 721 BTM_PCM2_READ_PARAM, 722 BTM_PCM2_WRITE_PARAM, 723 }; 724 typedef UINT8 tBTM_PCM2_ACTION; 725 #endif 726 727 typedef struct 728 { 729 tBTM_CFG cfg; /* Device configuration */ 730 731 /**************************************************** 732 ** ACL Management 733 ****************************************************/ 734 tACL_CONN acl_db[MAX_L2CAP_LINKS]; 735 #if( RFCOMM_INCLUDED==TRUE) 736 UINT8 btm_scn[BTM_MAX_SCN]; /* current SCNs: TRUE if SCN is in use */ 737 #endif 738 UINT16 btm_def_link_policy; 739 UINT16 btm_def_link_super_tout; 740 741 #if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE) 742 tBTM_BL_EVENT_MASK bl_evt_mask; 743 tBTM_BL_CHANGE_CB *p_bl_changed_cb; /* Callback for when Busy Level changed */ 744 #else 745 tBTM_ACL_DB_CHANGE_CB *p_acl_changed_cb; /* Callback for when ACL DB changed */ 746 #endif 747 748 tBTM_LSTO_CBACK *p_lsto_cback; /* for link supervision timeout change event */ 749 750 /**************************************************** 751 ** Power Management 752 ****************************************************/ 753 #if BTM_PWR_MGR_INCLUDED == TRUE 754 tBTM_PM_MCB pm_mode_db[MAX_L2CAP_LINKS]; /* per ACL link */ 755 tBTM_PM_RCB pm_reg_db[BTM_MAX_PM_RECORDS+1]; /* per application/module */ 756 UINT8 pm_pend_link; /* the index of acl_db, which has a pending PM cmd */ 757 UINT8 pm_pend_id; /* the id pf the module, which has a pending PM cmd */ 758 #endif /* BTM_PWR_MGR_INCLUDED == TRUE */ 759 760 /***************************************************** 761 ** Device control 762 *****************************************************/ 763 tBTM_DEVCB devcb; 764 765 /***************************************************** 766 ** BLE Device controllers 767 *****************************************************/ 768 #if (BLE_INCLUDED == TRUE) 769 tBTM_BLE_CB ble_ctr_cb; 770 771 UINT16 enc_handle; 772 BT_OCTET8 enc_rand; /* received rand value from LTK request*/ 773 UINT16 ediv; /* received ediv value from LTK request */ 774 UINT8 key_size; 775 #endif 776 777 /* Packet types supported by the local device */ 778 UINT16 btm_acl_pkt_types_supported; 779 UINT16 btm_sco_pkt_types_supported; 780 781 782 /***************************************************** 783 ** Inquiry 784 *****************************************************/ 785 tBTM_INQUIRY_VAR_ST btm_inq_vars; 786 tBTM_FILTER_CB *p_inq_filter_cb; /* Callback that can be set if host */ 787 /* wants to verify inquiry filters */ 788 789 /***************************************************** 790 ** SCO Management 791 *****************************************************/ 792 #if BTM_SCO_INCLUDED == TRUE 793 tSCO_CB sco_cb; 794 #endif 795 796 /***************************************************** 797 ** Security Management 798 *****************************************************/ 799 tBTM_APPL_INFO api; 800 801 #define BTM_SEC_MAX_RMT_NAME_CALLBACKS 2 802 tBTM_RMT_NAME_CALLBACK *p_rmt_name_callback[BTM_SEC_MAX_RMT_NAME_CALLBACKS]; 803 804 tBTM_FILTER_CB *p_conn_filter_cb; /* Callback that can be set if host */ 805 /* wants to verify connectability filters*/ 806 807 tBTM_SEC_DEV_REC *p_collided_dev_rec; 808 TIMER_LIST_ENT sec_collision_tle; 809 UINT32 collision_start_time; 810 UINT32 max_collision_delay; 811 UINT32 dev_rec_count; /* Counter used for device record timestamp */ 812 UINT8 security_mode; 813 BOOLEAN pairing_disabled; 814 BOOLEAN connect_only_paired; 815 BOOLEAN security_mode_changed; /* mode changed during bonding */ 816 BOOLEAN pin_type_changed; /* pin type changed during bonding */ 817 BOOLEAN sec_req_pending; /* TRUE if a request is pending */ 818 // btla-specific ++ 819 #ifdef PORCHE_PAIRING_CONFLICT 820 UINT8 pin_code_len_saved; /* for legacy devices */ 821 #endif 822 // btla-specific -- 823 824 UINT8 pin_code_len; /* for legacy devices */ 825 PIN_CODE pin_code; /* for legacy devices */ 826 tBTM_PAIRING_STATE pairing_state; /* The current pairing state */ 827 UINT8 pairing_flags; /* The current pairing flags */ 828 BD_ADDR pairing_bda; /* The device currently pairing */ 829 TIMER_LIST_ENT pairing_tle; /* Timer for pairing process */ 830 UINT16 disc_handle; /* for legacy devices */ 831 UINT8 disc_reason; /* for legacy devices */ 832 tBTM_SEC_SERV_REC sec_serv_rec[BTM_SEC_MAX_SERVICE_RECORDS]; 833 tBTM_SEC_DEV_REC sec_dev_rec[BTM_SEC_MAX_DEVICE_RECORDS]; 834 tBTM_SEC_SERV_REC *p_out_serv; 835 tBTM_MKEY_CALLBACK *mkey_cback; 836 837 BD_ADDR connecting_bda; 838 DEV_CLASS connecting_dc; 839 840 UINT8 first_disabled_channel; 841 UINT8 last_disabled_channel; 842 843 UINT8 acl_disc_reason; 844 UINT8 trace_level; 845 #if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE) 846 UINT8 num_acl; /* num of active ACL links */ 847 UINT8 busy_level; /* the current busy level */ 848 BOOLEAN is_paging; /* TRUE, if paging is in progess */ 849 BOOLEAN is_inquiry; /* TRUE, if inquiry is in progess */ 850 #endif 851 BUFFER_Q page_queue; 852 BOOLEAN paging; 853 BOOLEAN discing; 854 BUFFER_Q sec_pending_q; /* pending sequrity requests in tBTM_SEC_QUEUE_ENTRY format */ 855 856 #if (!defined(BT_TRACE_VERBOSE) || (BT_TRACE_VERBOSE == FALSE)) 857 char state_temp_buffer[BTM_STATE_BUFFER_SIZE]; 858 #endif 859 860 #if (defined(BTM_PCM2_INCLUDED) && BTM_PCM2_INCLUDED == TRUE) 861 UINT16 sys_features; 862 UINT8 pcm2_params[BRCM_PCM2_SETUP_WRITE_SIZE]; 863 tBTM_PCM2_ACTION pcm2_action; 864 #endif 865 866 } tBTM_CB; 867 868 869 #ifdef __cplusplus 870 extern "C" 871 { 872 #endif 873 874 #if BTM_DYNAMIC_MEMORY == FALSE 875 BTM_API extern tBTM_CB btm_cb; 876 #else 877 BTM_API extern tBTM_CB *btm_cb_ptr; 878 #define btm_cb (*btm_cb_ptr) 879 #endif 880 881 /* Internal functions provided by btm_main.c 882 ******************************************** 883 */ 884 extern void btm_init (void); 885 886 /* Internal functions provided by btm_inq.c 887 ******************************************* 888 */ 889 extern tBTM_STATUS btm_initiate_rem_name (BD_ADDR remote_bda, 890 tBTM_INQ_INFO *p_cur, 891 UINT8 origin, UINT32 timeout, 892 tBTM_CMPL_CB *p_cb); 893 894 extern void btm_process_remote_name (BD_ADDR bda, BD_NAME name, UINT16 evt_len, 895 UINT8 hci_status); 896 extern void btm_inq_rmt_name_failed(void); 897 898 /* Inquiry related functions */ 899 extern void btm_clr_inq_db (BD_ADDR p_bda); 900 extern void btm_inq_db_init (void); 901 extern void btm_process_inq_results (UINT8 *p, UINT8 inq_res_mode); 902 extern void btm_process_inq_complete (UINT8 status, UINT8 mode); 903 extern void btm_event_filter_complete (UINT8 *p); 904 extern void btm_inq_stop_on_ssp(void); 905 extern void btm_inq_clear_ssp(void); 906 extern tINQ_DB_ENT *btm_inq_db_find (BD_ADDR p_bda); 907 extern BOOLEAN btm_inq_find_bdaddr (BD_ADDR p_bda); 908 909 #if (BTM_EIR_CLIENT_INCLUDED == TRUE) 910 extern BOOLEAN btm_lookup_eir(BD_ADDR_PTR p_rem_addr); 911 #endif 912 913 /* Internal functions provided by btm_acl.c 914 ******************************************** 915 */ 916 extern void btm_acl_init (void); 917 extern void btm_acl_timeout (TIMER_LIST_ENT *p_tle); 918 extern void btm_acl_created (BD_ADDR bda, DEV_CLASS dc, BD_NAME bdn, 919 UINT16 hci_handle, UINT8 link_role, UINT8 is_le_link); 920 extern void btm_acl_removed (BD_ADDR bda); 921 extern void btm_acl_device_down (void); 922 extern void btm_acl_update_busy_level (tBTM_BLI_EVENT event); 923 extern void btm_acl_link_key_change (UINT16 handle, UINT8 status); 924 925 extern void btm_cont_rswitch_or_chglinkkey (tACL_CONN *p, 926 tBTM_SEC_DEV_REC *p_dev_rec, 927 UINT8 hci_status); 928 929 extern UINT8 btm_handle_to_acl_index (UINT16 hci_handle); 930 extern void btm_read_link_policy_complete (UINT8 *p); 931 extern void btm_read_rssi_complete (UINT8 *p); 932 extern void btm_read_tx_power_complete (UINT8 *p, BOOLEAN is_ble); 933 extern void btm_read_link_quality_complete (UINT8 *p); 934 extern tBTM_STATUS btm_set_packet_types (tACL_CONN *p, UINT16 pkt_types); 935 extern void btm_process_clk_off_comp_evt (UINT16 hci_handle, UINT16 clock_offset); 936 extern void btm_acl_role_changed (UINT8 hci_status, BD_ADDR bd_addr, UINT8 new_role); 937 extern void btm_acl_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable); 938 BTM_API extern UINT16 btm_get_acl_disc_reason_code (void); 939 BTM_API extern tBTM_STATUS btm_remove_acl (BD_ADDR bd_addr); 940 extern void btm_read_remote_features_complete (UINT8 *p); 941 extern void btm_read_remote_ext_features_complete (UINT8 *p); 942 extern void btm_read_remote_ext_features_failed (UINT8 status); 943 extern void btm_read_remote_version_complete (UINT8 *p); 944 // btla-specific ++ 945 extern void btm_acl_chk_peer_pkt_type_support (tACL_CONN *p, UINT16 *p_pkt_type); 946 // btla-specific -- 947 /* Read maximum data packet that can be sent over current connection */ 948 extern UINT16 btm_get_max_packet_size (BD_ADDR addr); 949 extern tACL_CONN *btm_bda_to_acl (BD_ADDR bda); 950 extern BOOLEAN btm_acl_notif_conn_collision (BD_ADDR bda); 951 952 #if BTM_PWR_MGR_INCLUDED == FALSE 953 extern void btm_process_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode, 954 UINT16 interval); 955 956 /* Internal functions provided by btm_pm.c 957 ******************************************** 958 */ 959 #else 960 extern void btm_pm_reset(void); 961 extern void btm_pm_sm_alloc(UINT8 ind); 962 extern void btm_pm_proc_cmd_status(UINT8 status); 963 extern void btm_pm_proc_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode, 964 UINT16 interval); 965 extern void btm_pm_proc_ssr_evt (UINT8 *p, UINT16 evt_len); 966 #if BTM_SCO_INCLUDED == TRUE 967 extern void btm_sco_chk_pend_unpark (UINT8 hci_status, UINT16 hci_handle); 968 #else 969 #define btm_sco_chk_pend_unpark(hci_status, hci_handle) 970 #endif /* BTM_SCO_INCLUDED */ 971 #endif /* BTM_PWR_MGR_INCLUDED == FALSE */ 972 extern void btm_qos_setup_complete (UINT8 status, UINT16 handle, FLOW_SPEC *p_flow); 973 974 975 /* Internal functions provided by btm_sco.c 976 ******************************************** 977 */ 978 extern void btm_sco_init (void); 979 extern void btm_sco_connected (UINT8 hci_status, BD_ADDR bda, UINT16 hci_handle, 980 tBTM_ESCO_DATA *p_esco_data); 981 extern void btm_esco_proc_conn_chg (UINT8 status, UINT16 handle, UINT8 tx_interval, 982 UINT8 retrans_window, UINT16 rx_pkt_len, 983 UINT16 tx_pkt_len); 984 extern void btm_sco_conn_req (BD_ADDR bda, DEV_CLASS dev_class, UINT8 link_type); 985 extern void btm_sco_removed (UINT16 hci_handle, UINT8 reason); 986 extern void btm_sco_acl_removed (BD_ADDR bda); 987 extern void btm_route_sco_data (BT_HDR *p_msg); 988 extern BOOLEAN btm_is_sco_active (UINT16 handle); 989 extern void btm_remove_sco_links (BD_ADDR bda); 990 extern BOOLEAN btm_is_sco_active_by_bdaddr (BD_ADDR remote_bda); 991 992 extern tBTM_SCO_TYPE btm_read_def_esco_mode (tBTM_ESCO_PARAMS *p_parms); 993 extern UINT16 btm_find_scb_by_handle (UINT16 handle); 994 extern void btm_sco_flush_sco_data(UINT16 sco_inx); 995 996 /* Internal functions provided by btm_devctl.c 997 ********************************************** 998 */ 999 extern void btm_dev_init (void); 1000 extern void btm_dev_absent (void); 1001 extern void btm_dev_timeout (TIMER_LIST_ENT *p_tle); 1002 extern void btm_reset_complete (void); 1003 extern void btm_read_local_version_complete (UINT8 *p, UINT16 evt_len); 1004 extern void btm_read_hci_buf_size_complete (UINT8 *p, UINT16 evt_len); 1005 extern void btm_read_local_features_complete (UINT8 *p, UINT16 evt_len); 1006 extern void btm_read_local_name_complete (UINT8 *p, UINT16 evt_len); 1007 extern void btm_read_local_addr_complete (UINT8 *p, UINT16 evt_len); 1008 extern void btm_get_local_features (void); 1009 1010 #if (BLE_INCLUDED == TRUE) 1011 extern void btm_read_ble_buf_size_complete (UINT8 *p, UINT16 evt_len); 1012 extern void btm_read_white_list_size_complete(UINT8 *p, UINT16 evt_len); 1013 extern void btm_ble_add_2_white_list_complete(UINT8 *p, UINT16 evt_len); 1014 extern void btm_ble_remove_from_white_list_complete(UINT8 *p, UINT16 evt_len); 1015 extern void btm_ble_clear_white_list_complete(UINT8 *p, UINT16 evt_len); 1016 #endif /* BLE_INCLUDED */ 1017 1018 /* Vendor Specific Command complete evt handler */ 1019 extern void btm_vsc_complete (UINT8 *p, UINT16 cc_opcode, UINT16 evt_len, 1020 tBTM_CMPL_CB *p_vsc_cplt_cback); 1021 extern void btm_inq_db_reset (void); 1022 extern void btm_vendor_specific_evt (UINT8 *p, UINT8 evt_len); 1023 extern UINT8 btm_get_hci_version (void); 1024 extern void btm_read_stored_link_key_complete (UINT8 *p); 1025 extern void btm_write_stored_link_key_complete (UINT8 *p); 1026 extern void btm_delete_stored_link_key_complete (UINT8 *p); 1027 extern void btm_return_link_keys_evt (tBTM_RETURN_LINK_KEYS_EVT *result); 1028 extern void btm_report_device_status (tBTM_DEV_STATUS status); 1029 1030 1031 /* Internal functions provided by btm_dev.c 1032 ********************************************** 1033 */ 1034 extern BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr); 1035 extern UINT8 btm_get_voice_coding_support (void); 1036 1037 extern tBTM_SEC_DEV_REC *btm_sec_alloc_dev (BD_ADDR bd_addr); 1038 extern void btm_sec_free_dev (tBTM_SEC_DEV_REC *p_dev_rec); 1039 extern tBTM_SEC_DEV_REC *btm_find_dev (BD_ADDR bd_addr); 1040 extern tBTM_SEC_DEV_REC *btm_find_or_alloc_dev (BD_ADDR bd_addr); 1041 extern tBTM_SEC_DEV_REC *btm_find_dev_by_handle (UINT16 handle); 1042 1043 /* Internal functions provided by btm_sec.c 1044 ********************************************** 1045 */ 1046 extern BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr); 1047 extern tBTM_STATUS btm_sec_l2cap_access_req (BD_ADDR bd_addr, UINT16 psm, 1048 UINT16 handle, CONNECTION_TYPE conn_type, 1049 tBTM_SEC_CALLBACK *p_callback, void *p_ref_data); 1050 extern tBTM_STATUS btm_sec_mx_access_request (BD_ADDR bd_addr, UINT16 psm, BOOLEAN is_originator, 1051 UINT32 mx_proto_id, UINT32 mx_chan_id, 1052 tBTM_SEC_CALLBACK *p_callback, void *p_ref_data); 1053 extern void btm_sec_conn_req (UINT8 *bda, UINT8 *dc); 1054 extern void btm_create_conn_cancel_complete (UINT8 *p); 1055 extern void btm_proc_lsto_evt(UINT16 handle, UINT16 timeout); 1056 extern void btm_read_linq_tx_power_complete (UINT8 *p); 1057 1058 extern void btm_sec_init (UINT8 sec_mode); 1059 extern void btm_sec_dev_reset (void); 1060 extern void btm_sec_abort_access_req (BD_ADDR bd_addr); 1061 extern void btm_sec_auth_complete (UINT16 handle, UINT8 status); 1062 extern void btm_sec_mkey_comp_event (UINT16 handle, UINT8 status, UINT8 key_flg); 1063 extern void btm_sec_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable); 1064 extern void btm_sec_connected (UINT8 *bda, UINT16 handle, UINT8 status, UINT8 enc_mode); 1065 extern tBTM_STATUS btm_sec_disconnect (UINT16 handle, UINT8 reason); 1066 extern void btm_sec_disconnected (UINT16 handle, UINT8 reason); 1067 extern void btm_sec_rmt_name_request_complete (UINT8 *bd_addr, UINT8 *bd_name, UINT8 status); 1068 extern void btm_sec_rmt_host_support_feat_evt (UINT8 *p); 1069 extern void btm_io_capabilities_req (UINT8 *p); 1070 extern void btm_io_capabilities_rsp (UINT8 *p); 1071 extern void btm_proc_sp_req_evt (tBTM_SP_EVT event, UINT8 *p); 1072 extern void btm_keypress_notif_evt (UINT8 *p); 1073 extern void btm_simple_pair_complete (UINT8 *p); 1074 extern void btm_sec_link_key_notification (UINT8 *p_bda, UINT8 *p_link_key, UINT8 key_type); 1075 extern void btm_sec_link_key_request (UINT8 *p_bda); 1076 extern void btm_sec_pin_code_request (UINT8 *p_bda); 1077 extern void btm_sec_update_clock_offset (UINT16 handle, UINT16 clock_offset); 1078 extern void btm_sec_dev_rec_cback_event (tBTM_SEC_DEV_REC *p_dev_rec, UINT8 res); 1079 1080 #if BLE_INCLUDED == TRUE 1081 extern void btm_sec_clear_ble_keys (tBTM_SEC_DEV_REC *p_dev_rec); 1082 extern BOOLEAN btm_sec_find_bonded_dev (UINT8 start_idx, UINT8 *p_found_idx, tBTM_SEC_DEV_REC *p_rec); 1083 extern BOOLEAN btm_sec_is_a_bonded_dev (BD_ADDR bda); 1084 #endif /* BLE_INCLUDED */ 1085 1086 extern tINQ_DB_ENT *btm_inq_db_new (BD_ADDR p_bda); 1087 1088 #if BTM_OOB_INCLUDED == TRUE 1089 extern void btm_rem_oob_req (UINT8 *p); 1090 extern void btm_read_local_oob_complete (UINT8 *p); 1091 #else 1092 #define btm_rem_oob_req(p) 1093 #define btm_read_local_oob_complete(p) 1094 #endif 1095 1096 extern void btm_acl_resubmit_page (void); 1097 extern void btm_acl_reset_paging (void); 1098 extern void btm_acl_paging (BT_HDR *p, BD_ADDR dest); 1099 extern void btm_acl_set_discing (BOOLEAN discing); 1100 extern UINT8 btm_sec_clr_service_by_psm (UINT16 psm); 1101 1102 #ifdef BRCM_VS 1103 extern void btm_brcm_feat_init(void); 1104 extern void btm_vs_reset_complete (void); 1105 extern void btm_brcm_arc_init (void); 1106 1107 #endif 1108 1109 #ifdef __cplusplus 1110 } 1111 #endif 1112 1113 #endif 1114 1115
