Lines Matching refs:Be
17 % This texinfo.tex file is distributed in the hope that it will be
34 % The texinfo.tex in any given distribution could well be out
157 % Since the category of space is not known, we have to be careful.
322 % Do this outside of the \shipout so @code etc. will be expanded in
323 % the headline as they should be, not taken literally (outputting ''code).
336 % the page break happens to be in the middle of an example.
340 % it needs to be
422 % the input line (except we remove a trailing comment). #1 should be a
473 % that a pair of braces would be stripped.
524 % whether the environment name matches. The \checkenv macro can also be
571 % The general wording of \badenverr may not be ideal.
581 % Be sure we're in horizontal mode when doing a tie, since we make space
622 \errmessage{Unknown @frenchspacing option `\temp', must be on|off}%
631 % @group ... @end group forces ... to be all on one page, by enclosing
639 % Another complication is that the group might be very large. This can
640 % cause the glue on the previous page to be unduly stretched, because it
644 % percent of a page (\vfilllimit can be changed inside of @tex).
696 group can only be used in environments such as @example,^^J%
715 % Do a \strut just to make the height of this box be normal, so the
822 % \vadjust can only be used in horizontal mode.
942 % NCHARS can also be the word `asis' or `none'.
1034 % be able to disable indexing, cross-referencing, and contents, for test runs.
1094 % can be set). So we test for \relax and 0 as well as being undefined.
1108 % double any backslashes. Otherwise, a name like "\node" will be
1131 with PDF output, and none of those formats could be found. (.eps cannot
1132 be supported due to the design of the PDF format; use regular TeX (DVI
1184 % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
1247 % used to mark target names; must be expandable.
1264 % #1 is the section text, which is what will be displayed in the
1267 % which might be empty if this toc entry had no corresponding node.
1931 % Definitions to make the main text be 10pt Computer Modern, with
2185 % Define these just so they can be easily changed for other fonts.
2219 % define and register \INITMACRO to be called on markup style changes.
2335 \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}%
2349 \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}%
2373 % Output an italic correction unless \next (presumed to be the following
2457 % Change normal interword space to be same as for the current font.
2492 % The following should really be moved into \setupmarkupstyle handlers.
2539 \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}%
2939 \else \errmessage{@dotless can be used only with i or j}%
3010 % Since these characters are used in examples, they should be an even number of
3054 % that. The Euro is designed to be slightly taller than the regular
3165 % be smaller yet, but lllsize is the best we can do for now.
3273 % don't worry much about spacing, ragged right. This should be used
3274 % inside a \vbox, and fonts need to be set appropriately first. Because
3276 % should be specified before the end of the \vbox, since a vbox is a group.
3286 % Macros to be used within @titlepage:
3305 % It can also be used inside @quotation.
3366 % @evenfooting will not be used by itself.
3536 % We're going to be starting a paragraph, but we don't want the
3541 % what follows is an environment such as @example, there will be no
3556 % eventually be printed.
3662 % \nobreak will be last on the list, and \sectionheading will have
3666 % usually is), we do want to zero parskip, or there would be too much
3677 % \splitoff TOKENS\endmark defines \first to be the first token in
3678 % TOKENS, and \rest to be the remainder.
3692 % Detect if the argument is a single token. If so, it might be a
3693 % letter. Otherwise, the only valid thing it can be is a number.
3699 % Only one token in the argument. It could still be anything.
3736 % Be sure we're not beyond the end of the alphabet.
3749 % Be sure we're not beyond the end of the alphabet.
3781 % can be specified either with sample text given in a template line,
3793 % current hsize to be used for each column. You may use as many
3803 % starts with @tab. Empty columns may be produced by supplying @tab's
3807 % @item, @tab do not need to be on their own lines, but it will not hurt
3821 % @tab Many paragraphs of text may be used in any column.
3824 % @item@tab@tab This will be in third column.
3827 % Default dimensions may be reset by user.
3830 % @multitablecolmargin is horizontal space to be left between columns.
3853 % be just 1. We just use it, whatever it is.
3881 % we'll always have a period there to be parsed.
3893 % Assignments have to be global since we are inside the implicit group
3941 % table breaks over pages. Wouldn't \vfil be better? Wait until the
3942 % problem manifests itself, so it can be fixed for real --karl.
3953 % be used as many times as user calls for columns.
3978 % The first column will be indented with the surrounding text.
4012 % this, but (ironically) that caused the spacing to be off.
4146 % Since we want to separate VAR from REST-OF-LINE (which might be
4196 % The command has to be fully expandable (if the variable is set), since
4281 % Define \newwrite to be identical to plain tex's \newwrite
4282 % except not \outer, so it can be used within macros and \if's.
4288 % It also defines \fooindfile to be the number of the output channel for
4290 % The name of an index should be no more than 2 characters long
4384 % causes processing to be prematurely terminated. This is,
4415 % this will be simpler.
4434 % not control letters, because the \space would be incorrect for
4441 % These can be used both for control words that take an argument and
4606 % would be for a given command (usually its argument).
4755 % so it will be output as is; and it will print as backslash.
4798 % of the skip. The only way seems to be to check the textual
4814 % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
4836 % following glue (such as a \parskip) would be a breakpoint. For example:
4845 % this make-up glue would be preceded by a non-discardable item
4917 % character. It would be better to use @, but that's too big a change
4937 % Remove any glue we may have, we'll be inserting our own.
4948 % to column. It still won't often be perfect, because of the stretch
4996 % When the entry text needs to be broken, just fill out the first line
5025 % there are no page numbers. The next person who breaks this will be
5090 % output routine. Generally, \partialpage will be empty when this
5091 % runs and this will be a no-op. See the indexspread.tex test case.
5145 % box0 will be the left-hand column, box2 the right.
5172 % fit on the page and has to be broken off. Without the following
5173 % penalty the page builder will not be exercised until \eject
5176 % double-column page will be processed with \balancecolumns, which
5198 % though, there will be another page break right after this \output
5201 % definition right away. (We hope \balancecolumns will never be
5479 % This used to be simply \message{#1}, but TeX fully expands the
5483 % to be executed, not expanded).
5729 % xref code eventually uses it. On the other hand, it has to be called
5828 \checkenv{}% should not be in an environment.
5873 % Go into vertical mode. Usually we'll already be there, but we
5918 % Interline glue will be inserted when the vbox is completed.
5919 % That glue will be a valid breakpoint for the page, since it'll be
5935 % Do not let the kern be a potential breakpoint, as it would be if it
5942 % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out
5968 % any other fixed time) so that @contents can be anywhere in the document.
6118 % This space should be enough, since a single number is .5em, and the
6195 % If the toc has to be broken over pages, we want it to be at chapters
6352 \ifhmode\par\fi % can't be in the midst of a paragraph.
6404 \hfuzz = 12pt % Don't be fussy
6405 \sepspaces % Make spaces be word-separators rather than space tokens.
6540 \hbadness=10000 % Last line will usually be underfull, so turn off
6548 \hbadness=10000 % Last line will usually be underfull, so turn off
6671 % (can we?), so the \global won't be overwriting itself.
6769 % Saving the text in a box would be much easier, but then all the
6770 % typesetting commands (@smallbook, font changes, etc.) have to be done
6771 % beforehand -- and a) we want @copying to be done first in the source
6871 % \deffnheader has to be defined explicitly.
6901 must be on|off}%
7047 % \hsize has to be shortened this way:
7052 % Allow all lines to be underfull without complaint:
7056 % defun fonts. We use typewriter by default (used to be bold) because:
7057 % . we're printing identifiers, they should be in tt in principle.
7061 % . we don't want -- and --- to be treated as ligatures.
7080 % arguments will be output next, if any.
7114 % Be sure that we always have a definition for `(', etc. For example,
7115 % if the fn name has parens in it, \boldbrax will not be in effect yet,
7220 % The \empty here causes a following catcode 5 newline to be eaten as
7242 % Currently is also contains all @aliases; the list can be split
7327 % that would be written @\ @{ @} in a Texinfo document.
7331 % define for @math can't be used with @macro calls):
7339 % \anythingelse will almost certainly be an error of some kind.
7345 % We define \csname macarg.\endcsname to be \realbackslash, so
7426 % in the params list to some hook where the argument si to be expanded. If
7427 % there are less than 10 arguments that hook is to be replaced by ##N where N
7428 % is the position in that list, that is to say the macro arguments are to be
7434 % The technique used is stolen from LaTeX: let \hash be something
7442 % hook remains in the body, and when macro is to be expanded the body is
7485 % don't want \the to be expanded in the \parsermacbody as it uses an
7588 % values. The trick for values not to be expanded themselves is that they
7641 % newtoks that can be used non \outer .
7856 \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout
7877 must be on|off}%
7886 % manual. All but the node name can be omitted.
7946 % spaces in #1, which should be ignored.
8015 % _ (for example) has to be the character _ for the purposes of the
8022 % @unnumbered and @anchor, it won't be.
8026 % output the `[mynode]' via the macro below so it can be overridden.
8066 % output. It's a separate macro only so it can be changed more easily,
8213 % all be worked out, but why? Either we support ^^ or we don't.
8221 % Special characters. Should be turned off anyway, but...
8240 % of the xrdef. Seems like it should be a catcode12 \, and that
8245 % Make the characters 128-255 be printing characters.
8276 % removed. (Generally, numeric constants should always be followed by a
8304 % footnote text as a parameter. Our footnotes don't need to be so general.
8329 % to exdent this text, so make it be a no-op. makeinfo does not use
8330 % hanging indentation so @noindent can still be needed within footnote
8351 % would be lost.
8354 % And the same can be done for other insert classes. --kasal, 16nov03.
8414 % time, we might be inside a group, and then its definitions would get
8427 \newhelp\noepsfhelp{epsf.tex must be installed for images to
8435 \errmessage{epsf.tex not found, images will be ignored}%
8503 % There may be a space before second and/or third parameter; delete it.
8508 % this float will not be numbered and cannot be referred to.
8510 % #2 is the optional xref label. Also must be present for the float to
8511 % be referable.
8531 % We can't be used inside a paragraph.
8553 % We want each FLOATTYPE to be numbered separately (Figure 1,
8705 % #1 is (maybe) the \floatmagic string. If so, #2 will be the
8746 % Figures without xref labels will not be included in the list (since
8803 \newhelp\nolanghelp{The given language definition file cannot be found or
8859 % Supported encodings: names converted to tokens in order to be able
8896 % A message to be logged when using a character that isn't available
8904 % First, make active non-ASCII characters in order for them to be
8944 \gdef^^be{$3\over4$}
9028 \gdef^^be{\"Y}
9064 \gdef^^be{\v z}
9652 \def\asciichardefs{% nothing need be done
9674 % Don't be very finicky about underfull hboxes, either.
9811 % He also recommends making @example and @lisp be small.
9899 % (where it can probably be output as-is), and another way in other fonts,
9900 % where something hairier probably needs to be done.
9949 % name cannot be active until we have parsed the command line.
9990 % \otherbackslash defines an active \ to be a literal `\' character with
