1 /****************************************************************************** 2 * 3 * Copyright (C) 1999-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * this file contains the main Bluetooth Manager (BTM) internal 22 * definitions. 23 * 24 ******************************************************************************/ 25 26 #ifndef BTM_BLE_INT_H 27 #define BTM_BLE_INT_H 28 29 #include "bt_target.h" 30 #include "gki.h" 31 #include "hcidefs.h" 32 #include "btm_ble_api.h" 33 #include "btm_int.h" 34 35 #if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE 36 #include "smp_api.h" 37 #endif 38 39 40 /* scanning enable status */ 41 #define BTM_BLE_SCAN_ENABLE 0x01 42 #define BTM_BLE_SCAN_DISABLE 0x00 43 44 /* advertising enable status */ 45 #define BTM_BLE_ADV_ENABLE 0x01 46 #define BTM_BLE_ADV_DISABLE 0x00 47 48 /* use the high 4 bits unused by inquiry mode */ 49 #define BTM_BLE_SELECT_SCAN 0x20 50 #define BTM_BLE_NAME_REQUEST 0x40 51 #define BTM_BLE_OBSERVE 0x80 52 53 #define BTM_BLE_MAX_WL_ENTRY 1 54 #define BTM_BLE_AD_DATA_LEN 31 55 56 #define BTM_BLE_ENC_MASK 0x03 57 58 #define BTM_BLE_DUPLICATE_ENABLE 1 59 #define BTM_BLE_DUPLICATE_DISABLE 0 60 61 #define BTM_BLE_GAP_DISC_SCAN_INT 18 /* Interval(scan_int) = 11.25 ms= 0x0010 * 0.625 ms */ 62 #define BTM_BLE_GAP_DISC_SCAN_WIN 18 /* scan_window = 11.25 ms= 0x0010 * 0.625 ms */ 63 #define BTM_BLE_GAP_ADV_INT 512 /* Tgap(gen_disc) = 1.28 s= 512 * 0.625 ms */ 64 #define BTM_BLE_GAP_LIM_TOUT 30 /* Tgap(lim_timeout) = 30.72 s max, round down to 30 */ 65 66 67 #define BTM_BLE_SEC_REQ_ACT_NONE 0 68 #define BTM_BLE_SEC_REQ_ACT_ENCRYPT 1 /* encrypt the link using current key or key refresh */ 69 #define BTM_BLE_SEC_REQ_ACT_PAIR 2 70 #define BTM_BLE_SEC_REQ_ACT_DISCARD 3 /* discard the sec request while encryption is started but not completed */ 71 typedef UINT8 tBTM_BLE_SEC_REQ_ACT; 72 73 #define BLE_STATIC_PRIVATE_MSB_MASK 0x3f 74 #define BLE_RESOLVE_ADDR_MSB 0x40 /* most significant bit, bit7, bit6 is 01 to be resolvable random */ 75 #define BLE_RESOLVE_ADDR_MASK 0xc0 /* bit 6, and bit7 */ 76 #define BTM_BLE_IS_RESOLVE_BDA(x) ((x[0] & BLE_RESOLVE_ADDR_MASK) == BLE_RESOLVE_ADDR_MSB) 77 78 typedef struct 79 { 80 UINT16 data_mask; 81 UINT8 *p_flags; 82 UINT8 ad_data[BTM_BLE_AD_DATA_LEN]; 83 UINT8 *p_pad; 84 }tBTM_BLE_LOCAL_ADV_DATA; 85 86 typedef struct 87 { 88 UINT32 inq_count; /* Used for determining if a response has already been */ 89 /* received for the current inquiry operation. (We do not */ 90 /* want to flood the caller with multiple responses from */ 91 /* the same device. */ 92 BOOLEAN scan_rsp; 93 tBLE_BD_ADDR le_bda; 94 } tINQ_LE_BDADDR; 95 96 #define BTM_BLE_ADV_DATA_LEN_MAX 31 97 #define BTM_BLE_CACHE_ADV_DATA_MAX 62 98 99 #define BTM_BLE_VALID_PRAM(x, min, max) (((x) >= (min) && (x) <= (max)) || ((x) == BTM_BLE_CONN_PARAM_UNDEF)) 100 101 typedef struct 102 { 103 104 UINT16 discoverable_mode; 105 UINT16 connectable_mode; 106 UINT16 br_edr_supported_flag; /* combined BR EDR discoverable and connectable mode */ 107 /* only meaningful when it is zero. This means 108 BR EDR is not supported*/ 109 UINT8 proc_mode; /* current procedure mode : inquiry or discovery */ 110 111 UINT16 scan_window; 112 UINT16 scan_interval; 113 UINT8 scan_type; /* current scan type: active or passive */ 114 UINT16 adv_interval_min; 115 UINT16 adv_interval_max; 116 tBTM_BLE_AFP afp; /* advertising filter policy */ 117 tBTM_BLE_SFP sfp; /* scanning filter policy */ 118 119 tBLE_ADDR_TYPE adv_addr_type; 120 UINT8 evt_type; 121 UINT8 adv_mode; 122 tBLE_BD_ADDR direct_bda; 123 BOOLEAN directed_conn; 124 125 UINT8 adv_len; 126 UINT8 adv_data_cache[BTM_BLE_CACHE_ADV_DATA_MAX]; 127 128 /* inquiry BD addr database */ 129 UINT8 num_bd_entries; 130 UINT8 max_bd_entries; 131 132 133 tBTM_BLE_LOCAL_ADV_DATA adv_data; 134 tBTM_BLE_ADV_CHNL_MAP adv_chnl_map; 135 136 TIMER_LIST_ENT inq_timer_ent; 137 BOOLEAN scan_rsp; 138 UINT8 state; /* Current state that the inquiry process is in */ 139 INT8 tx_power; 140 } tBTM_BLE_INQ_CB; 141 142 143 /* random address resolving complete callback */ 144 typedef void (tBTM_BLE_RESOLVE_CBACK) (void * match_rec, void *p); 145 146 typedef void (tBTM_BLE_ADDR_CBACK) (BD_ADDR_PTR static_random, void *p); 147 148 /* random address management control block */ 149 typedef struct 150 { 151 tBLE_ADDR_TYPE own_addr_type; /* local device LE address type */ 152 BD_ADDR private_addr; 153 BD_ADDR random_bda; 154 BOOLEAN busy; 155 UINT16 index; 156 tBTM_BLE_RESOLVE_CBACK *p_resolve_cback; 157 tBTM_BLE_ADDR_CBACK *p_generate_cback; 158 void *p; 159 TIMER_LIST_ENT raddr_timer_ent; 160 } tBTM_LE_RANDOM_CB; 161 162 #define BTM_BLE_MAX_BG_CONN_DEV_NUM 10 163 164 typedef struct 165 { 166 UINT16 min_conn_int; 167 UINT16 max_conn_int; 168 UINT16 slave_latency; 169 UINT16 supervision_tout; 170 171 }tBTM_LE_CONN_PRAMS; 172 173 174 typedef struct 175 { 176 BD_ADDR bd_addr; 177 UINT8 attr; 178 BOOLEAN is_connected; 179 BOOLEAN in_use; 180 }tBTM_LE_BG_CONN_DEV; 181 182 /* white list using state as a bit mask */ 183 #define BTM_BLE_WL_IDLE 0 184 #define BTM_BLE_WL_INIT 1 185 #define BTM_BLE_WL_SCAN 2 186 #define BTM_BLE_WL_ADV 4 187 typedef UINT8 tBTM_BLE_WL_STATE; 188 189 /* BLE connection state */ 190 #define BLE_CONN_IDLE 0 191 #define BLE_DIR_CONN 1 192 #define BLE_BG_CONN 2 193 typedef UINT8 tBTM_BLE_CONN_ST; 194 195 typedef struct 196 { 197 void *p_param; 198 }tBTM_BLE_CONN_REQ; 199 /* Define BLE Device Management control structure 200 */ 201 typedef struct 202 { 203 /***************************************************** 204 ** BLE Inquiry 205 *****************************************************/ 206 tBTM_BLE_INQ_CB inq_var; 207 208 /* background connection procedure cb value */ 209 tBTM_BLE_CONN_TYPE bg_conn_type; 210 UINT16 scan_int; 211 UINT16 scan_win; 212 tBTM_BLE_SEL_CBACK *p_select_cback; 213 TIMER_LIST_ENT scan_param_idle_timer; 214 215 /* white list information */ 216 UINT8 num_empty_filter; /* Number of entries in white list */ 217 UINT8 max_filter_entries; /* Maximum number of entries that can be stored */ 218 tBTM_BLE_WL_STATE wl_state; 219 UINT8 bg_dev_num; 220 tBTM_LE_BG_CONN_DEV bg_dev_list[BTM_BLE_MAX_BG_CONN_DEV_NUM]; 221 222 BUFFER_Q conn_pending_q; 223 tBTM_BLE_CONN_ST conn_state; 224 225 /* random address management control block */ 226 tBTM_LE_RANDOM_CB addr_mgnt_cb; 227 228 BOOLEAN enabled; 229 230 #ifdef BTM_BLE_PC_ADV_TEST_MODE 231 tBTM_BLE_SCAN_REQ_CBACK *p_scan_req_cback; 232 #endif 233 234 BOOLEAN scatternet_enable; 235 } tBTM_BLE_CB; 236 237 #ifdef __cplusplus 238 extern "C" { 239 #endif 240 241 extern void btm_ble_timeout(TIMER_LIST_ENT *p_tle); 242 extern void btm_ble_process_adv_pkt (UINT8 *p); 243 extern void btm_ble_proc_scan_rsp_rpt (UINT8 *p); 244 extern tBTM_STATUS btm_ble_read_remote_name(BD_ADDR remote_bda, tBTM_INQ_INFO *p_cur, tBTM_CMPL_CB *p_cb); 245 extern BOOLEAN btm_ble_cancel_remote_name(BD_ADDR remote_bda); 246 247 extern tBTM_STATUS btm_ble_set_discoverability(UINT16 combined_mode); 248 extern tBTM_STATUS btm_ble_set_connectability(UINT16 combined_mode); 249 extern tBTM_STATUS btm_ble_start_inquiry (UINT8 mode, UINT8 duration); 250 extern void btm_ble_dir_adv_tout(void); 251 252 extern void btm_ble_stop_scan(void); 253 extern void btm_ble_att_db_init(void); 254 extern void btm_ble_init (void); 255 extern void btm_ble_connected (UINT8 *bda, UINT16 handle, UINT8 enc_mode, UINT8 role, tBLE_ADDR_TYPE addr_type, BOOLEAN addr_matched); 256 extern void btm_ble_read_remote_features_complete(UINT8 *p); 257 extern void btm_ble_write_adv_enable_complete(UINT8 * p); 258 extern void btm_ble_conn_complete(UINT8 *p, UINT16 evt_len); 259 extern tBTM_BLE_CONN_ST btm_ble_get_conn_st(void); 260 extern void btm_ble_set_conn_st(tBTM_BLE_CONN_ST new_st); 261 262 263 /* LE security function from btm_sec.c */ 264 #if SMP_INCLUDED == TRUE 265 extern void btm_ble_link_sec_check(BD_ADDR bd_addr, tBTM_LE_AUTH_REQ auth_req, tBTM_BLE_SEC_REQ_ACT *p_sec_req_act); 266 extern void btm_ble_ltk_request_reply(BD_ADDR bda, BOOLEAN use_stk, BT_OCTET16 stk); 267 extern UINT8 btm_proc_smp_cback(tSMP_EVT event, BD_ADDR bd_addr, tSMP_EVT_DATA *p_data); 268 extern tBTM_STATUS btm_ble_set_encryption (BD_ADDR bd_addr, void *p_ref_data, UINT8 link_role); 269 extern void btm_ble_ltk_request(UINT16 handle, UINT8 rand[8], UINT16 ediv); 270 extern BOOLEAN btm_ble_start_encrypt(BD_ADDR bda, BOOLEAN use_stk, BT_OCTET16 stk); 271 extern void btm_ble_link_encrypted(BD_ADDR bd_addr, UINT8 encr_enable); 272 #endif 273 274 /* LE device management functions */ 275 extern void btm_ble_reset_id( void ); 276 277 /* security related functions */ 278 extern void btm_ble_increment_sign_ctr(BD_ADDR bd_addr, BOOLEAN is_local ); 279 extern BOOLEAN btm_get_local_div (BD_ADDR bd_addr, UINT16 *p_div); 280 extern BOOLEAN btm_ble_check_link_type (BD_ADDR bd_addr); 281 extern BOOLEAN btm_ble_get_enc_key_type(BD_ADDR bd_addr, UINT8 *p_key_types); 282 283 extern void btm_ble_rand_enc_complete (UINT8 *p, UINT16 op_code, tBTM_RAND_ENC_CB *p_enc_cplt_cback); 284 extern void btm_sec_save_le_key(BD_ADDR bd_addr, tBTM_LE_KEY_TYPE key_type, tBTM_LE_KEY_VALUE *p_keys, BOOLEAN pass_to_application); 285 extern void btm_ble_update_sec_key_size(BD_ADDR bd_addr, UINT8 enc_key_size); 286 extern UINT8 btm_ble_read_sec_key_size(BD_ADDR bd_addr); 287 288 /* white list function */ 289 extern BOOLEAN btm_update_dev_to_white_list(BOOLEAN to_add, BD_ADDR bd_addr,UINT8 wl_type); 290 extern BOOLEAN btm_update_bg_conn_list(BOOLEAN to_add, BD_ADDR bd_addr, UINT8 *p_attr_tag); 291 extern void btm_update_scanner_filter_policy(tBTM_BLE_SFP scan_policy); 292 extern void btm_update_adv_filter_policy(tBTM_BLE_AFP adv_policy); 293 extern void btm_ble_clear_white_list (void); 294 295 /* background connection function */ 296 extern void btm_ble_suspend_bg_conn(void); 297 extern BOOLEAN btm_ble_resume_bg_conn(void); 298 extern void btm_ble_initiate_select_conn(BD_ADDR bda); 299 extern BOOLEAN btm_ble_start_auto_conn(BOOLEAN start); 300 extern BOOLEAN btm_ble_start_select_conn(BOOLEAN start,tBTM_BLE_SEL_CBACK *p_select_cback); 301 extern BOOLEAN btm_ble_renew_bg_conn_params(BOOLEAN add, BD_ADDR bd_addr); 302 extern UINT8 btm_ble_count_unconn_dev_in_whitelist(void); 303 extern void btm_write_dir_conn_wl(BD_ADDR target_addr); 304 extern void btm_ble_update_mode_operation(UINT8 link_role, BD_ADDR bda, BOOLEAN conn_ccancel); 305 306 /* direct connection utility */ 307 extern BOOLEAN btm_send_pending_direct_conn(void); 308 extern void btm_ble_enqueue_direct_conn_req(void *p_param); 309 310 /* BLE address management */ 311 extern void btm_gen_resolvable_private_addr (void); 312 extern void btm_gen_non_resolvable_private_addr (tBTM_BLE_ADDR_CBACK *p_cback, void *p); 313 extern void btm_ble_resolve_random_addr(BD_ADDR random_bda, tBTM_BLE_RESOLVE_CBACK * p_cback, void *p); 314 extern void btm_ble_update_reconnect_address(BD_ADDR bd_addr); 315 316 #if BTM_BLE_CONFORMANCE_TESTING == TRUE 317 BT_API extern void btm_ble_set_no_disc_if_pair_fail (BOOLEAN disble_disc); 318 BT_API extern void btm_ble_set_test_mac_value (BOOLEAN enable, UINT8 *p_test_mac_val); 319 BT_API extern void btm_ble_set_test_local_sign_cntr_value(BOOLEAN enable, UINT32 test_local_sign_cntr); 320 BT_API extern void btm_set_random_address(BD_ADDR random_bda); 321 #endif 322 323 324 #ifdef __cplusplus 325 } 326 #endif 327 328 #endif 329
