Lines Matching refs:network
19 # file whenever configuration is changed (e.g., new network block is added with
26 # global configuration (shared by all network blocks)
46 # possible to run wpa_supplicant as root (since it needs to change network
49 # change the network configuration, this access needs to be protected in many
93 # the currently enabled networks are found, a new network (IBSS or AP mode
103 # the network blocks in the configuration file are tried one by one until
104 # the driver reports successful association; each network block should have
107 # When using IBSS or AP mode, ap_scan=2 mode can force the new network to be
110 # networks are found, a new IBSS or AP mode network is created.
133 # loaded here before being used in the network blocks. By default, EAP methods
192 # 6-0050F204-1 (Network Infrastructure / AP)
271 # with the global okc=1 parameter or with the per-network
273 # can be disabled with per-network proactive_key_caching=0 parameter.
279 # parameter or with the per-network ieee80211w=1/2 parameter. With pmf=1/2, PMF
280 # is enabled/required by default, but can be disabled with the per-network
292 # Default value for DTIM period (if not overridden in network block)
295 # Default value for Beacon interval (if not overridden in network block)
325 # Automatic network selection behavior
326 # 0 = do not automatically go through Interworking network selection
328 # 1 = perform Interworking network selection if one or more
330 # matching network block
335 # Each credential used for automatic network selection is configured as a set
344 # (and similarly in struct wpa_ssid for network blocks) to change the
346 # network (based on either an enabled network block or a credential)
353 # username: Username for Interworking network selection
355 # password: Password for Interworking network selection
357 # ca_cert: CA certificate for Interworking network selection
407 # Consortium to match the network, the EAP parameters need to be
424 # matching with the network. Multiple entries can be used to specify more
456 # network block
458 # Each network (usually AP's sharing the same SSID) is configured as a separate
459 # block in this configuration file. The network blocks are in preference order
462 # network block fields:
465 # 0 = this network can be used (default)
466 # 1 = this network block is disabled (can be enabled through ctrl_iface,
469 # id_str: Network identifier string for external scripts. This value is passed
471 # variable to make it easier to do network specific configuration.
473 # ssid: SSID (mandatory); network name in one of the optional formats:
484 # bssid: BSSID (optional); if set, this network block is used only when
492 # priority value, the sooner the network is matched against the scan results).
505 # following network block options:
513 # an IBSS network with the configured SSID is already present, the frequency of
514 # the network will be used instead of this configured value.
518 # BSS. If the subset of channels used by the network is known, this option can
519 # be used to optimize scanning to not occur on channels that the network does
531 # single network block with all the APs using the same SSID). The bgscan
538 # learn - Learn channels used by the network and try to avoid bgscans on other
572 # LEAP = LEAP/Network EAP (only used with LEAP)
807 # small enough to make the EAP messages fit in MTU of the network
905 network={
913 network={
921 network={
932 network={
944 network={
961 network={
975 network={
988 network={
1001 network={
1019 network={
1031 network={
1038 network={
1048 network={
1061 network={
1075 network={
1084 network={
1093 network={
1104 network={
1116 network={
1123 network={
1136 network={
1148 # IBSS/ad-hoc network with WPA-None/TKIP.
1149 network={
1162 network={
1180 network={
1213 network={
1231 network={
