Lines Matching full:used
102 commands are used to establish static, or so-called
118 address to be used to reach the peer must also be specified. This is
138 used at each site must correspond or no data will be passed. No
140 used to establish unmanaged L2TP tunnels. Once the virtual network
166 identifies the tunnel. The value used must match the peer_tunnel_id
167 value being used at the peer.
171 the tunnel by the peer. The value used must match the tunnel_id value
172 being used at the peer.
179 set the IP address of the local interface to be used for the
190 set the UDP source port to be used for the tunnel. Must be present
195 set the UDP destination port to be used for the tunnel. Must be
220 identifies the session being created. The value used must match the
221 peer_session_id value being used at the peer.
225 the session by the peer. The value used must match the session_id
226 value being used at the peer.
244 transmitted L2TP data packets. This is hardly ever used. If set, the
245 value must match the peer_offset value used at the peer. Default is 0.
249 received L2TP data packets. This is hardly ever used. If set, the
250 value must match the offset value used at the peer. Default is 0.
343 the recipient, depending on the MTU of the physical interface used by
360 If L2TP is being used over IPv6, use the IPv6 degrag module.
367 tunnels. Hello messages are used by L2TP clients and servers to detect
