Lines Matching full:used
6 client (e.g., management GUI) is used to enable WPS enrollment and
68 to be used for some operations (mainly WPS activation in GO). This may
85 The optional dev_id option can be used to specify a single P2P peer to
86 search for. The optional delay parameter can be used to request an extra
87 delay to be used between search iterations (e.g., to free up radio
93 other devices). Optional parameter can be used to specify the duration
96 testing. It can also be used to keep the device discoverable without
119 The optional "join" parameter can be used to indicate that this command
121 mainly used with "display" to request it to display a PIN. The "auto"
122 parameter can be used to request wpa_supplicant to automatically figure
138 used (e.g., 12345670). [display|keypad] is used with PIN method
139 to specify which PIN is used (display=dynamically generated random PIN
141 parameter can be used to request a persistent group to be formed. The
142 "persistent=<network id>" alternative can be used to pre-populate
143 SSID/passphrase configuration based on a previously used persistent
144 group where this device was the GO. The previously used parameters will
145 then be used if the local end becomes the GO in GO Negotiation (which
158 "go_intent" can be used to override the default GO Intent for this GO
161 "freq" can be used to set a forced operating channel (e.g., freq=2412
164 "provdisc" can be used to request a Provision Discovery exchange to be
165 used prior to starting GO Negotiation as a workaround with some deployed
173 GO. Optional persistent=<network id> can be used to specify restart of
174 a persistent group. Optional freq=<freq in MHz> can be used to force
176 options can be used to request the best 2.4 GHz or 5 GHz band channel
188 Terminate a P2P group. If a new virtual network interface was used for
190 group interface is used as a parameter for this command.
198 P2P group interface (if one was used) that is in the WPS provisioning
204 This command can be used to remove the specified client from all groups
232 "1f77628") that can be used to cancel the request. Directed requests
249 For UPnP, an alternative command format can be used to specify a
306 1 0300000101". This command is used only if external program is used
311 Indicate that local services have changed. This is used to increment
381 used to specify which device to invite. go_dev_addr parameter can be
382 used to override the GO device address for Invitation Request should
393 (These are used on the group interface.)
398 the AP/GO. This is used on the GO when a P2P client joins an existing
407 Enrollee to connect to the AP/GO. This is used
447 enabled by default and this parameter is mainly used to allow testing
470 can be used to request GO to assign a unique PSK for each client during
474 the old PSK. When per-client PSK is not used, the client can still be
477 passphrase on the GO that is normally used to allow legacy stations to
484 operations. The format on these parameters is same as is used in
564 (These are used on the group interface.)
584 persistent groups. The identifier in this list is used with
