Lines Matching full:used
6 management GUI) is used to enable WPS enrollment and registrar
38 when WPS is used to configure the access point.
48 wpa_supplicant includes an optional WPS component that can be used as
70 Following parameter can be used to enable support for NFC config method:
104 The PIN value used in the commands must be processed by an UI to
106 digit. "wpa_cli wps_check_pin <PIN>" can be used to do such processing.
125 used. wpa_supplicant is notified this with a control interface
134 interface, an optional timeout parameter can be used to specify
141 can be used to generate a new PIN without starting WPS negotiation.
167 This is used to fetch the current AP settings instead of actually
188 flags field that is used to indicate whether the BSS support WPS. If
194 monitor events WPS-AP-AVAILABLE{,-PBC,-PIN} can be used to find out if
196 all the details in the GUI. These notification could be used, e.g., to
218 option. When this is used, an external program is responsible for
232 wpa_supplicant can be used as a WPS ER to configure an AP or enroll
238 operations. A special "none" driver can be used in such a case to
240 example, following command could be used to start the ER:
254 - the optional IP address parameter can be used to filter operations only
268 only prepares a configuration to be used when enrolling a new device
285 - if Enrollee UUID is not known, "any" can be used to add a wildcard PIN
321 WPS can be used with NFC-based configuration method. An NFC tag
322 containing a password token from the Enrollee can be used to
324 with a configuration token can be used to transfer AP settings without
328 token can be used by touching the NFC interface of a Registrar.
335 (build with "make nfc_pw_token") can be used to generate NFC password
339 The "wps_nfc_config_token <WPS/NDEF>" command can be used to build an
346 can be used to touch an NFC interface on a station to provision the
349 The "wps_nfc_config_token <WPS/NDEF> <network id>" command can be used
363 then be used with wps_reg command (when the NFC password token was from
366 token is used to enable enrollment of a new station (that was the source
369 "nfc_get_handover_req <NDEF> <WPS>" command can be used to build the
375 "nfc_get_handover_sel <NDEF> <WPS> [UUID|BSSID]" command can be used to
385 "nfc_rx_handover_req <hexdump of payload>" is used to indicate receipt
391 "nfc_rx_handover_sel <hexdump of payload>" is used to indicate receipt
397 <carrier from handover select>" can be used as an alternative way for
404 used to build an NFC configuration token for the specified AP when
410 NFC configuration token can be used to touch an NFC interface on a
