Lines Matching full:used
56 * This pointer can be used to iterate over all networks. The head of
64 * This pointer can be used to iterate over all networks in the same
73 * This identifier is used as a unique identifier for each network
84 * of the networks are more desirable, this field can be used to change
94 * they try the networks in the order that used in the configuration
103 * used to select which network will be used. If set to %NULL (or
104 * ssid_len=0), any SSID can be used. For wired interfaces, this must
120 * If set, this network block is used only when associating with the AP
198 * scan_ssid can be used to scan for APs using hidden SSIDs.
199 * Note: Many drivers do not support this. ap_mode=2 can be used with
238 * This field can be used to enable proactive key caching which is also
243 * Proactive key caching is used to make supplicant assume that the APs
246 * and is normally used with wireless switches that co-locate the
249 * Internally, special value -1 is used to indicate that the parameter
258 * This option can be used to configure whether so called mixed cells,
270 * This field should be set to 1 if LEAP is enabled. This is used to
279 * enabled. This is used to select IEEE 802.11 authentication
310 * 4 = P2P Group Formation (used internally; not in configuration
313 * Note: IBSS can only be used with key_mgmt NONE (plaintext and
331 * 0 = this network can be used (default).
335 * group (can be used with P2P ctrl_iface commands)
342 * This flag is used to reenable all the temporarily disabled networks
350 * This is only used when both RSN/WPA2 and IEEE 802.11e (QoS) are
371 * This value is used to configure policy for management frame
376 * Internally, special value 3 is used to indicate that the parameter
386 * This value is used to configure the initial channel for IBSS (adhoc)
388 * the infrastructure mode. In addition, this value is only used by the
391 * will be used instead of this configured value.
400 * This value can be used to enforce rekeying of PTK to mitigate some
410 * network. This can be used to speed up scanning when the network is
472 * p2p_group - Network generated as a P2P group (used internally)
589 * This timeout value is used in AP mode to clean up inactive stations.
618 * This pointer can be used to delete temporary networks when a wpa_cred
619 * that was used to create them is removed. This pointer should not be
