| /prebuilts/ndk/7/platforms/android-9/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/7/platforms/android-9/arch-x86/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/8/platforms/android-14/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/8/platforms/android-14/arch-mips/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/8/platforms/android-14/arch-x86/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/8/platforms/android-3/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/8/platforms/android-4/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/8/platforms/android-5/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/8/platforms/android-8/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/8/platforms/android-9/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/8/platforms/android-9/arch-mips/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/8/platforms/android-9/arch-x86/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-14/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-14/arch-mips/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-14/arch-x86/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-18/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-18/arch-mips/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-18/arch-x86/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-3/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-4/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-5/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-8/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-9/arch-arm/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-9/arch-mips/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
| /prebuilts/ndk/9/platforms/android-9/arch-x86/usr/include/linux/ |
| qic117.h | 77 #define QIC117_COMMANDS { {NULL, 0x00, 0x00, mode, 0, discretional}, {"soft reset", 0x00, 0x00, motion, 1, required}, {"report next bit", 0x00, 0x00, report, 0, required}, {"pause", 0x36, 0x24, motion, 1, required}, {"micro step pause", 0x36, 0x24, motion, 1, required}, {"alternate command timeout", 0x00, 0x00, mode, 0, required}, {"report drive status", 0x00, 0x00, report, 0, required}, {"report error code", 0x01, 0x01, report, 0, required}, {"report drive configuration",0x00, 0x00, report, 0, required}, {"report rom version", 0x00, 0x00, report, 0, required}, {"logical forward", 0x37, 0x25, motion, 0, required}, {"physical reverse", 0x17, 0x05, motion, 0, required}, {"physical forward", 0x17, 0x05, motion, 0, required}, {"seek head to track", 0x37, 0x25, motion, 0, required}, {"seek load point", 0x17, 0x05, motion, 1, required}, {"enter format mode", 0x1f, 0x05, mode, 0, required}, {"write reference burst", 0x1f, 0x05, motion, 1, required}, {"enter verify mode", 0x37, 0x25, mode, 0, required}, {"stop tape", 0x00, 0x00, motion, 1, required}, {"reserved (19)", 0x00, 0x00, unused, 0, discretional}, {"reserved (20)", 0x00, 0x00, unused, 0, discretional}, {"micro step head up", 0x02, 0x00, motion, 0, required}, {"micro step head down", 0x02, 0x00, motion, 0, required}, {"soft select", 0x00, 0x00, mode, 0, discretional}, {"soft deselect", 0x00, 0x00, mode, 0, discretional}, {"skip segments reverse", 0x36, 0x24, motion, 1, required}, {"skip segments forward", 0x36, 0x24, motion, 1, required}, {"select rate or format", 0x03, 0x01, mode, 0, required }, {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional}, {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional}, {"enter primary mode", 0x00, 0x00, mode, 0, required}, {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional}, {"report vendor id", 0x00, 0x00, report, 0, required}, {"report tape status", 0x04, 0x04, report, 0, ccs1}, {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1}, {"skip extended forward", 0x36, 0x24, motion, 1, ccs1}, {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2}, {"report format segments", 0x17, 0x05, report, 0, ccs2}, {"set format segments", 0x17, 0x05, mode, 0, ccs2}, {"reserved (39)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional}, {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional}, {"phantom select", 0x00, 0x00, mode, 0, discretional}, {"phantom deselect", 0x00, 0x00, mode, 0, discretional}, }
121 #define QIC117_ERRORS { { "No error", 0, }, { "Command Received while Drive Not Ready", 0, }, { "Cartridge Not Present or Removed", 1, }, { "Motor Speed Error (not within 1%)", 1, }, { "Motor Speed Fault (jammed, or gross speed error", 1, }, { "Cartridge Write Protected", 1, }, { "Undefined or Reserved Command Code", 1, }, { "Illegal Track Address Specified for Seek", 1, }, { "Illegal Command in Report Subcontext", 0, }, { "Illegal Entry into a Diagnostic Mode", 1, }, { "Broken Tape Detected (based on hole sensor)", 1, }, { "Warning--Read Gain Setting Error", 1, }, { "Command Received While Error Status Pending (obs)", 1, }, { "Command Received While New Cartridge Pending", 1, }, { "Command Illegal or Undefined in Primary Mode", 1, }, { "Command Illegal or Undefined in Format Mode", 1, }, { "Command Illegal or Undefined in Verify Mode", 1, }, { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, }, { "Logical EOT Before All Segments generated", 1, }, { "Command Illegal When Cartridge Not Referenced", 1, }, { "Self-Diagnostic Failed (cannot be cleared)", 1, }, { "Warning EEPROM Not Initialized, Defaults Set", 1, }, { "EEPROM Corrupted or Hardware Failure", 1, }, { "Motion Time-out Error", 1, }, { "Data Segment Too Long -- Logical Forward or Pause", 1, }, { "Transmit Overrun (obs)", 1, }, { "Power On Reset Occurred", 0, }, { "Software Reset Occurred", 0, }, { "Diagnostic Mode 1 Error", 1, }, { "Diagnostic Mode 2 Error", 1, }, { "Command Received During Non-Interruptible Process", 1, }, { "Rate or Format Selection Error", 1, }, { "Illegal Command While in High Speed Mode", 1, }, { "Illegal Seek Segment Value", 1, }, { "Invalid Media", 1, }, { "Head Positioning Failure", 1, }, { "Write Reference Burst Failure", 1, }, { "Prom Code Missing", 1, }, { "Invalid Format", 1, }, { "EOT/BOT System Failure", 1, }, { "Prom A Checksum Error", 1, }, { "Drive Wakeup Reset Occurred", 1, }, { "Prom B Checksum Error", 1, }, { "Illegal Entry into Format Mode", 1, }, }
|
