Lines Matching full:reported
205 tools. Likewise, touching tools and hovering tools are reported to applications
207 <p>Touching tools are reported to applications as touch events
210 <p>Hovering tools are reported to applications as generic motion events using
350 <p>For a touch screen, the system automatically interpolates the reported touch
356 <p>A touch screen may report touches outside of the reported active area.</p>
365 area. If a touch exits the active area, it should be reported as being outside of
366 the active area, or it should not be reported at all.</p>
379 <p>The values reported by <code>ABS_PRESSURE</code> or <code>ABS_MT_PRESSURE</code>, if they
380 are reported at all, must be non-zero when the tool is touching the device
387 <p>The values reported by <code>ABS_TOOL_WIDTH</code>, <code>ABS_MT_TOUCH_MAJOR</code>, <code>ABS_MT_TOUCH_MINOR</code>,
397 <p>The values reported by <code>ABS_DISTANCE</code> or <code>ABS_MT_DISTANCE</code> should approach
399 even when the tool is in direct contact. The exact values reported depend
405 <p>The values reported by <code>ABS_TILT_X</code> and <code>ABS_TILT_Y</code> should be zero when the
421 <p>If the tool type is reported by <code>ABS_MT_TOOL_TYPE</code>, it will supercede any tool
422 type information reported by <code>BTN_TOOL_*</code>.
457 and the reported pressure is zero, then the tool is hovering.</p>
479 <p>Previous versions of Android expected "up" events to be reported by sending
484 <p>Physical pressure or signal strength information should be reported using
491 <p>Touch size information should be reported using <code>ABS_MT_TOUCH_MAJOR</code>.</p>
562 files to decode, transform, and normalize the values reported by the touch
568 <p>The following expressions denote the raw values reported by the touch
615 be reported to applications such as display pixels.</p>
666 <p>If the value is <code>1</code>, touch positions reported by the touch device are rotated
670 <p>If the value is <code>0</code>, touch positions reported by the touch device are immune
683 is reported as a touch in the top-left corner of the display's rotated coordinate system.
684 This is done so that touches are reported with the same coordinate system that
784 <p>Specifies whether the size is reported as the sum of the sizes of all
785 active contacts, or is reported individually for each contact.</p>
788 <p>If the value is <code>1</code>, the reported size will be divided by the number
792 <p>If the value is <code>0</code>, the reported size will be used as is.</p>
1014 <p>If the value is <code>scaled</code>, the reported distance is multiplied by a
