Lines Matching refs:Support
6 support weak references to its instances. If weak\n reference support is needed, then add ``\'__weakref__\'`` to the\n sequence of strings in the *__slots__* declaration.\n\n Changed in version 2.3: Previously, adding ``\'__weakref__\'`` to the\n *__slots__* declaration would not enable support for weak\n references.\n\n* *__slots__* are implemented at the class level by creating\n descriptors (*Implementing Descriptors*) for each variable name. As\n a result, class attributes cannot be used to set default values for\n instance variables defined by *__slots__*; otherwise, the class\n attribute would overwrite the descriptor assignment.\n\n* The action of a *__slots__* declaration is limited to the class\n where it is defined. As a result, subclasses will have a *__dict__*\n unless they also define *__slots__* (which must only contain names\n of any *additional* slots).\n\n* If a class defines a slot also defined in a base class, the instance\n variable defined by the base class slot is inaccessible (except by\n retrieving its descriptor directly from the base class). This\n renders the meaning of the program undefined. In the future, a\n check may be added to prevent this.\n\n* Nonempty *__slots__* does not work for classes derived from\n "variable-length" built-in types such as ``long``, ``str`` and\n ``tuple``.\n\n* Any non-string iterable may be assigned to *__slots__*. Mappings may\n also be used; however, in the future, special meaning may be\n assigned to the values corresponding to each key.\n\n* *__class__* assignment works only if both classes have the same\n *__slots__*.\n\n Changed in version 2.6: Previously, *__class__* assignment raised an\n error if either new or old class had *__slots__*.\n',
20 'comparisons': '\nComparisons\n***********\n\nUnlike C, all comparison operations in Python have the same priority,\nwhich is lower than that of any arithmetic, shifting or bitwise\noperation. Also unlike C, expressions like ``a < b < c`` have the\ninterpretation that is conventional in mathematics:\n\n comparison ::= or_expr ( comp_operator or_expr )*\n comp_operator ::= "<" | ">" | "==" | ">=" | "<=" | "<>" | "!="\n | "is" ["not"] | ["not"] "in"\n\nComparisons yield boolean values: ``True`` or ``False``.\n\nComparisons can be chained arbitrarily, e.g., ``x < y <= z`` is\nequivalent to ``x < y and y <= z``, except that ``y`` is evaluated\nonly once (but in both cases ``z`` is not evaluated at all when ``x <\ny`` is found to be false).\n\nFormally, if *a*, *b*, *c*, ..., *y*, *z* are expressions and *op1*,\n*op2*, ..., *opN* are comparison operators, then ``a op1 b op2 c ... y\nopN z`` is equivalent to ``a op1 b and b op2 c and ... y opN z``,\nexcept that each expression is evaluated at most once.\n\nNote that ``a op1 b op2 c`` doesn\'t imply any kind of comparison\nbetween *a* and *c*, so that, e.g., ``x < y > z`` is perfectly legal\n(though perhaps not pretty).\n\nThe forms ``<>`` and ``!=`` are equivalent; for consistency with C,\n``!=`` is preferred; where ``!=`` is mentioned below ``<>`` is also\naccepted. The ``<>`` spelling is considered obsolescent.\n\nThe operators ``<``, ``>``, ``==``, ``>=``, ``<=``, and ``!=`` compare\nthe values of two objects. The objects need not have the same type.\nIf both are numbers, they are converted to a common type. Otherwise,\nobjects of different types *always* compare unequal, and are ordered\nconsistently but arbitrarily. You can control comparison behavior of\nobjects of non-built-in types by defining a ``__cmp__`` method or rich\ncomparison methods like ``__gt__``, described in section *Special\nmethod names*.\n\n(This unusual definition of comparison was used to simplify the\ndefinition of operations like sorting and the ``in`` and ``not in``\noperators. In the future, the comparison rules for objects of\ndifferent types are likely to change.)\n\nComparison of objects of the same type depends on the type:\n\n* Numbers are compared arithmetically.\n\n* Strings are compared lexicographically using the numeric equivalents\n (the result of the built-in function ``ord()``) of their characters.\n Unicode and 8-bit strings are fully interoperable in this behavior.\n [4]\n\n* Tuples and lists are compared lexicographically using comparison of\n corresponding elements. This means that to compare equal, each\n element must compare equal and the two sequences must be of the same\n type and have the same length.\n\n If not equal, the sequences are ordered the same as their first\n differing elements. For example, ``cmp([1,2,x], [1,2,y])`` returns\n the same as ``cmp(x,y)``. If the corresponding element does not\n exist, the shorter sequence is ordered first (for example, ``[1,2] <\n [1,2,3]``).\n\n* Mappings (dictionaries) compare equal if and only if their sorted\n (key, value) lists compare equal. [5] Outcomes other than equality\n are resolved consistently, but are not otherwise defined. [6]\n\n* Most other objects of built-in types compare unequal unless they are\n the same object; the choice whether one object is considered smaller\n or larger than another one is made arbitrarily but consistently\n within one execution of a program.\n\nThe operators ``in`` and ``not in`` test for collection membership.\n``x in s`` evaluates to true if *x* is a member of the collection *s*,\nand false otherwise. ``x not in s`` returns the negation of ``x in\ns``. The collection membership test has traditionally been bound to\nsequences; an object is a member of a collection if the collection is\na sequence and contains an element equal to that object. However, it\nmake sense for many other object types to support membership tests\nwithout being a sequence. In particular, dictionaries (for keys) and\nsets support membership testing.\n\nFor the list and tuple types, ``x in y`` is true if and only if there\nexists an index *i* such that ``x == y[i]`` is true.\n\nFor the Unicode and string types, ``x in y`` is true if and only if\n*x* is a substring of *y*. An equivalent test is ``y.find(x) != -1``.\nNote, *x* and *y* need not be the same type; consequently, ``u\'ab\' in\n\'abc\'`` will return ``True``. Empty strings are always considered to\nbe a substring of any other string, so ``"" in "abc"`` will return\n``True``.\n\nChanged in version 2.3: Previously, *x* was required to be a string of\nlength ``1``.\n\nFor user-defined classes which define the ``__contains__()`` method,\n``x in y`` is true if and only if ``y.__contains__(x)`` is true.\n\nFor user-defined classes which do not define ``__contains__()`` but do\ndefine ``__iter__()``, ``x in y`` is true if some value ``z`` with ``x\n== z`` is produced while iterating over ``y``. If an exception is\nraised during the iteration, it is as if ``in`` raised that exception.\n\nLastly, the old-style iteration protocol is tried: if a class defines\n``__getitem__()``, ``x in y`` is true if and only if there is a non-\nnegative integer index *i* such that ``x == y[i]``, and all lower\ninteger indices do not raise ``IndexError`` exception. (If any other\nexception is raised, it is as if ``in`` raised that exception).\n\nThe operator ``not in`` is defined to have the inverse true value of\n``in``.\n\nThe operators ``is`` and ``is not`` test for object identity: ``x is\ny`` is true if and only if *x* and *y* are the same object. ``x is\nnot y`` yields the inverse truth value. [7]\n',
21 Support
25 'customization': '\nBasic customization\n*******************\n\nobject.__new__(cls[, ...])\n\n Called to create a new instance of class *cls*. ``__new__()`` is a\n static method (special-cased so you need not declare it as such)\n that takes the class of which an instance was requested as its\n first argument. The remaining arguments are those passed to the\n object constructor expression (the call to the class). The return\n value of ``__new__()`` should be the new object instance (usually\n an instance of *cls*).\n\n Typical implementations create a new instance of the class by\n invoking the superclass\'s ``__new__()`` method using\n ``super(currentclass, cls).__new__(cls[, ...])`` with appropriate\n arguments and then modifying the newly-created instance as\n necessary before returning it.\n\n If ``__new__()`` returns an instance of *cls*, then the new\n instance\'s ``__init__()`` method will be invoked like\n ``__init__(self[, ...])``, where *self* is the new instance and the\n remaining arguments are the same as were passed to ``__new__()``.\n\n If ``__new__()`` does not return an instance of *cls*, then the new\n instance\'s ``__init__()`` method will not be invoked.\n\n ``__new__()`` is intended mainly to allow subclasses of immutable\n types (like int, str, or tuple) to customize instance creation. It\n is also commonly overridden in custom metaclasses in order to\n customize class creation.\n\nobject.__init__(self[, ...])\n\n Called when the instance is created. The arguments are those\n passed to the class constructor expression. If a base class has an\n ``__init__()`` method, the derived class\'s ``__init__()`` method,\n if any, must explicitly call it to ensure proper initialization of\n the base class part of the instance; for example:\n ``BaseClass.__init__(self, [args...])``. As a special constraint\n on constructors, no value may be returned; doing so will cause a\n ``TypeError`` to be raised at runtime.\n\nobject.__del__(self)\n\n Called when the instance is about to be destroyed. This is also\n called a destructor. If a base class has a ``__del__()`` method,\n the derived class\'s ``__del__()`` method, if any, must explicitly\n call it to ensure proper deletion of the base class part of the\n instance. Note that it is possible (though not recommended!) for\n the ``__del__()`` method to postpone destruction of the instance by\n creating a new reference to it. It may then be called at a later\n time when this new reference is deleted. It is not guaranteed that\n ``__del__()`` methods are called for objects that still exist when\n the interpreter exits.\n\n Note: ``del x`` doesn\'t directly call ``x.__del__()`` --- the former\n decrements the reference count for ``x`` by one, and the latter\n is only called when ``x``\'s reference count reaches zero. Some\n common situations that may prevent the reference count of an\n object from going to zero include: circular references between\n objects (e.g., a doubly-linked list or a tree data structure with\n parent and child pointers); a reference to the object on the\n stack frame of a function that caught an exception (the traceback\n stored in ``sys.exc_traceback`` keeps the stack frame alive); or\n a reference to the object on the stack frame that raised an\n unhandled exception in interactive mode (the traceback stored in\n ``sys.last_traceback`` keeps the stack frame alive). The first\n situation can only be remedied by explicitly breaking the cycles;\n the latter two situations can be resolved by storing ``None`` in\n ``sys.exc_traceback`` or ``sys.last_traceback``. Circular\n references which are garbage are detected when the option cycle\n detector is enabled (it\'s on by default), but can only be cleaned\n up if there are no Python-level ``__del__()`` methods involved.\n Refer to the documentation for the ``gc`` module for more\n information about how ``__del__()`` methods are handled by the\n cycle detector, particularly the description of the ``garbage``\n value.\n\n Warning: Due to the precarious circumstances under which ``__del__()``\n methods are invoked, exceptions that occur during their execution\n are ignored, and a warning is printed to ``sys.stderr`` instead.\n Also, when ``__del__()`` is invoked in response to a module being\n deleted (e.g., when execution of the program is done), other\n globals referenced by the ``__del__()`` method may already have\n been deleted or in the process of being torn down (e.g. the\n import machinery shutting down). For this reason, ``__del__()``\n methods should do the absolute minimum needed to maintain\n external invariants. Starting with version 1.5, Python\n guarantees that globals whose name begins with a single\n underscore are deleted from their module before other globals are\n deleted; if no other references to such globals exist, this may\n help in assuring that imported modules are still available at the\n time when the ``__del__()`` method is called.\n\n See also the *-R* command-line option.\n\nobject.__repr__(self)\n\n Called by the ``repr()`` built-in function and by string\n conversions (reverse quotes) to compute the "official" string\n representation of an object. If at all possible, this should look\n like a valid Python expression that could be used to recreate an\n object with the same value (given an appropriate environment). If\n this is not possible, a string of the form ``<...some useful\n description...>`` should be returned. The return value must be a\n string object. If a class defines ``__repr__()`` but not\n ``__str__()``, then ``__repr__()`` is also used when an "informal"\n string representation of instances of that class is required.\n\n This is typically used for debugging, so it is important that the\n representation is information-rich and unambiguous.\n\nobject.__str__(self)\n\n Called by the ``str()`` built-in function and by the ``print``\n statement to compute the "informal" string representation of an\n object. This differs from ``__repr__()`` in that it does not have\n to be a valid Python expression: a more convenient or concise\n representation may be used instead. The return value must be a\n string object.\n\nobject.__lt__(self, other)\nobject.__le__(self, other)\nobject.__eq__(self, other)\nobject.__ne__(self, other)\nobject.__gt__(self, other)\nobject.__ge__(self, other)\n\n New in version 2.1.\n\n These are the so-called "rich comparison" methods, and are called\n for comparison operators in preference to ``__cmp__()`` below. The\n correspondence between operator symbols and method names is as\n follows: ``x<y`` calls ``x.__lt__(y)``, ``x<=y`` calls\n ``x.__le__(y)``, ``x==y`` calls ``x.__eq__(y)``, ``x!=y`` and\n ``x<>y`` call ``x.__ne__(y)``, ``x>y`` calls ``x.__gt__(y)``, and\n ``x>=y`` calls ``x.__ge__(y)``.\n\n A rich comparison method may return the singleton\n ``NotImplemented`` if it does not implement the operation for a\n given pair of arguments. By convention, ``False`` and ``True`` are\n returned for a successful comparison. However, these methods can\n return any value, so if the comparison operator is used in a\n Boolean context (e.g., in the condition of an ``if`` statement),\n Python will call ``bool()`` on the value to determine if the result\n is true or false.\n\n There are no implied relationships among the comparison operators.\n The truth of ``x==y`` does not imply that ``x!=y`` is false.\n Accordingly, when defining ``__eq__()``, one should also define\n ``__ne__()`` so that the operators will behave as expected. See\n the paragraph on ``__hash__()`` for some important notes on\n creating *hashable* objects which support custom comparison\n operations and are usable as dictionary keys.\n\n There are no swapped-argument versions of these methods (to be used\n when the left argument does not supportsupport custom\n comparison operations and are usable as dictionary keys. (Note: the\n restriction that exceptions are not propagated by ``__cmp__()`` has\n been removed since Python 1.5.)\n\nobject.__rcmp__(self, other)\n\n Changed in version 2.1: No longer supported.\n\nobject.__hash__(self)\n\n Called by built-in function ``hash()`` and for operations on\n members of hashed collections including ``set``, ``frozenset``, and\n ``dict``. ``__hash__()`` should return an integer. The only\n required property is that objects which compare equal have the same\n hash value; it is advised to somehow mix together (e.g. using\n exclusive or) the hash values for the components of the object that\n also play a part in comparison of objects.\n\n If a class does not define a ``__cmp__()`` or ``__eq__()`` method\n it should not define a ``__hash__()`` operation either; if it\n defines ``__cmp__()`` or ``__eq__()`` but not ``__hash__()``, its\n instances will not be usable in hashed collections. If a class\n defines mutable objects and implements a ``__cmp__()`` or\n ``__eq__()`` method, it should not implement ``__hash__()``, since\n hashable collection implementations require that a object\'s hash\n value is immutable (if the object\'s hash value changes, it will be\n in the wrong hash bucket).\n\n User-defined classes have ``__cmp__()`` and ``__hash__()`` methods\n by default; with them, all objects compare unequal (except with\n themselves) and ``x.__hash__()`` returns ``id(x)``.\n\n Classes which inherit a ``__hash__()`` method from a parent class\n but change the meaning of ``__cmp__()`` or ``__eq__()`` such that\n the hash value returned is no longer appropriate (e.g. by switching\n to a value-based concept of equality instead of the default\n identity based equality) can explicitly flag themselves as being\n unhashable by setting ``__hash__ = None`` in the class definition.\n Doing so means that not only will instances of the class raise an\n appropriate ``TypeError`` when a program attempts to retrieve their\n hash value, but they will also be correctly identified as\n unhashable when checking ``isinstance(obj, collections.Hashable)``\n (unlike classes which define their own ``__hash__()`` to explicitly\n raise ``TypeError``).\n\n Changed in version 2.5: ``__hash__()`` may now also return a long\n integer object; the 32-bit integer is then derived from the hash of\n that object.\n\n Changed in version 2.6: ``__hash__`` may now be set to ``None`` to\n explicitly flag instances of a class as unhashable.\n\nobject.__nonzero__(self)\n\n Called to implement truth value testing and the built-in operation\n ``bool()``; should return ``False`` or ``True``, or their integer\n equivalents ``0`` or ``1``. When this method is not defined,\n ``__len__()`` is called, if it is defined, and the object is\n considered true if its result is nonzero. If a class defines\n neither ``__len__()`` nor ``__nonzero__()``, all its instances are\n considered true.\n\nobject.__unicode__(self)\n\n Called to implement ``unicode()`` built-in; should return a Unicode\n object. When this method is not defined, string conversion is\n attempted, and the result of string conversion is converted to\n Unicode using the system default encoding.\n',
36 supportnts/total)\n \'Correct answers: 88.64%\'\n\nUsing type-specific formatting:\n\n >>> import datetime\n >>> d = datetime.datetime(2010, 7, 4, 12, 15, 58)\n >>> \'{:%Y-%m-%d %H:%M:%S}\'.format(d)\n \'2010-07-04 12:15:58\'\n\nNesting arguments and more complex examples:\n\n >>> for align, text in zip(\'<^>\', [\'left\', \'center\', \'right\']):\n ... \'{0:{fill}{align}16}\'.format(text, fill=align, align=align)\n ...\n \'left<<<<<<<<<<<<\'\n \'^^^^^center^^^^^\'\n \'>>>>>>>>>>>right\'\n >>>\n >>> octets = [192, 168, 0, 1]\n >>> \'{:02X}{:02X}{:02X}{:02X}\'.format(*octets)\n \'C0A80001\'\n >>> int(_, 16)\n 3232235521\n >>>\n >>> width = 5\n >>> for num in range(5,12):\n ... for base in \'dXob\':\n ... print \'{0:{width}{base}}\'.format(num, base=base, width=width),\n ... print\n ...\n 5 5 5 101\n 6 6 6 110\n 7 7 7 111\n 8 8 10 1000\n 9 9 11 1001\n 10 A 12 1010\n 11 B 13 1011\n',
43 support applications that\ndetermine which modules need to be loaded dynamically.\n\n\nFuture statements\n=================\n\nA *future statement* is a directive to the compiler that a particular\nmodule should be compiled using syntax or semantics that will be\navailable in a specified future release of Python. The future\nstatement is intended to ease migration to future versions of Python\nthat introduce incompatible changes to the language. It allows use of\nthe new features on a per-module basis before the release in which the\nfeature becomes standard.\n\n future_statement ::= "from" "__future__" "import" feature ["as" name]\n ("," feature ["as" name])*\n | "from" "__future__" "import" "(" feature ["as" name]\n ("," feature ["as" name])* [","] ")"\n feature ::= identifier\n name ::= identifier\n\nA future statement must appear near the top of the module. The only\nlines that can appear before a future statement are:\n\n* the module docstring (if any),\n\n* comments,\n\n* blank lines, and\n\n* other future statements.\n\nThe features recognized by Python 2.6 are ``unicode_literals``,\n``print_function``, ``absolute_import``, ``division``, ``generators``,\n``nested_scopes`` and ``with_statement``. ``generators``,\n``with_statement``, ``nested_scopes`` are redundant in Python version\n2.6 and above because they are always enabled.\n\nA future statement is recognized and treated specially at compile\ntime: Changes to the semantics of core constructs are often\nimplemented by generating different code. It may even be the case\nthat a new feature introduces new incompatible syntax (such as a new\nreserved word), in which case the compiler may need to parse the\nmodule differently. Such decisions cannot be pushed off until\nruntime.\n\nFor any given release, the compiler knows which feature names have\nbeen defined, and raises a compile-time error if a future statement\ncontains a feature not known to it.\n\nThe direct runtime semantics are the same as for any import statement:\nthere is a standard module ``__future__``, described later, and it\nwill be imported in the usual way at the time the future statement is\nexecuted.\n\nThe interesting runtime semantics depend on the specific feature\nenabled by the future statement.\n\nNote that there is nothing special about the statement:\n\n import __future__ [as name]\n\nThat is not a future statement; it\'s an ordinary import statement with\nno special semantics or syntax restrictions.\n\nCode compiled by an ``exec`` statement or calls to the built-in\nfunctions ``compile()`` and ``execfile()`` that occur in a module\n``M`` containing a future statement will, by default, use the new\nsyntax or semantics associated with the future statement. This can,\nstarting with Python 2.2 be controlled by optional arguments to\n``compile()`` --- see the documentation of that function for details.\n\nA future statement typed at an interactive interpreter prompt will\ntake effect for the rest of the interpreter session. If an\ninterpreter is started with the *-i* option, is passed a script name\nto execute, and the script includes a future statement, it will be in\neffect in the interactive session started after the script is\nexecuted.\n\nSee also:\n\n **PEP 236** - Back to the __future__\n The original proposal for the __future__ mechanism.\n',
44 'in': '\nComparisons\n***********\n\nUnlike C, all comparison operations in Python have the same priority,\nwhich is lower than that of any arithmetic, shifting or bitwise\noperation. Also unlike C, expressions like ``a < b < c`` have the\ninterpretation that is conventional in mathematics:\n\n comparison ::= or_expr ( comp_operator or_expr )*\n comp_operator ::= "<" | ">" | "==" | ">=" | "<=" | "<>" | "!="\n | "is" ["not"] | ["not"] "in"\n\nComparisons yield boolean values: ``True`` or ``False``.\n\nComparisons can be chained arbitrarily, e.g., ``x < y <= z`` is\nequivalent to ``x < y and y <= z``, except that ``y`` is evaluated\nonly once (but in both cases ``z`` is not evaluated at all when ``x <\ny`` is found to be false).\n\nFormally, if *a*, *b*, *c*, ..., *y*, *z* are expressions and *op1*,\n*op2*, ..., *opN* are comparison operators, then ``a op1 b op2 c ... y\nopN z`` is equivalent to ``a op1 b and b op2 c and ... y opN z``,\nexcept that each expression is evaluated at most once.\n\nNote that ``a op1 b op2 c`` doesn\'t imply any kind of comparison\nbetween *a* and *c*, so that, e.g., ``x < y > z`` is perfectly legal\n(though perhaps not pretty).\n\nThe forms ``<>`` and ``!=`` are equivalent; for consistency with C,\n``!=`` is preferred; where ``!=`` is mentioned below ``<>`` is also\naccepted. The ``<>`` spelling is considered obsolescent.\n\nThe operators ``<``, ``>``, ``==``, ``>=``, ``<=``, and ``!=`` compare\nthe values of two objects. The objects need not have the same type.\nIf both are numbers, they are converted to a common type. Otherwise,\nobjects of different types *always* compare unequal, and are ordered\nconsistently but arbitrarily. You can control comparison behavior of\nobjects of non-built-in types by defining a ``__cmp__`` method or rich\ncomparison methods like ``__gt__``, described in section *Special\nmethod names*.\n\n(This unusual definition of comparison was used to simplify the\ndefinition of operations like sorting and the ``in`` and ``not in``\noperators. In the future, the comparison rules for objects of\ndifferent types are likely to change.)\n\nComparison of objects of the same type depends on the type:\n\n* Numbers are compared arithmetically.\n\n* Strings are compared lexicographically using the numeric equivalents\n (the result of the built-in function ``ord()``) of their characters.\n Unicode and 8-bit strings are fully interoperable in this behavior.\n [4]\n\n* Tuples and lists are compared lexicographically using comparison of\n corresponding elements. This means that to compare equal, each\n element must compare equal and the two sequences must be of the same\n type and have the same length.\n\n If not equal, the sequences are ordered the same as their first\n differing elements. For example, ``cmp([1,2,x], [1,2,y])`` returns\n the same as ``cmp(x,y)``. If the corresponding element does not\n exist, the shorter sequence is ordered first (for example, ``[1,2] <\n [1,2,3]``).\n\n* Mappings (dictionaries) compare equal if and only if their sorted\n (key, value) lists compare equal. [5] Outcomes other than equality\n are resolved consistently, but are not otherwise defined. [6]\n\n* Most other objects of built-in types compare unequal unless they are\n the same object; the choice whether one object is considered smaller\n or larger than another one is made arbitrarily but consistently\n within one execution of a program.\n\nThe operators ``in`` and ``not in`` test for collection membership.\n``x in s`` evaluates to true if *x* is a member of the collection *s*,\nand false otherwise. ``x not in s`` returns the negation of ``x in\ns``. The collection membership test has traditionally been bound to\nsequences; an object is a member of a collection if the collection is\na sequence and contains an element equal to that object. However, it\nmake sense for many other object types to support membership tests\nwithout being a sequence. In particular, dictionaries (for keys) and\nsets support membership testing.\n\nFor the list and tuple types, ``x in y`` is true if and only if there\nexists an index *i* such that ``x == y[i]`` is true.\n\nFor the Unicode and string types, ``x in y`` is true if and only if\n*x* is a substring of *y*. An equivalent test is ``y.find(x) != -1``.\nNote, *x* and *y* need not be the same type; consequently, ``u\'ab\' in\n\'abc\'`` will return ``True``. Empty strings are always considered to\nbe a substring of any other string, so ``"" in "abc"`` will return\n``True``.\n\nChanged in version 2.3: Previously, *x* was required to be a string of\nlength ``1``.\n\nFor user-defined classes which define the ``__contains__()`` method,\n``x in y`` is true if and only if ``y.__contains__(x)`` is true.\n\nFor user-defined classes which do not define ``__contains__()`` but do\ndefine ``__iter__()``, ``x in y`` is true if some value ``z`` with ``x\n== z`` is produced while iterating over ``y``. If an exception is\nraised during the iteration, it is as if ``in`` raised that exception.\n\nLastly, the old-style iteration protocol is tried: if a class defines\n``__getitem__()``, ``x in y`` is true if and only if there is a non-\nnegative integer index *i* such that ``x == y[i]``, and all lower\ninteger indices do not raise ``IndexError`` exception. (If any other\nexception is raised, it is as if ``in`` raised that exception).\n\nThe operator ``not in`` is defined to have the inverse true value of\n``in``.\n\nThe operators ``is`` and ``is not`` test for object identity: ``x is\ny`` is true if and only if *x* and *y* are the same object. ``x is\nnot y`` yields the inverse truth value. [7]\n',
50 'numeric-types': '\nEmulating numeric types\n***********************\n\nThe following methods can be defined to emulate numeric objects.\nMethods corresponding to operations that are not supported by the\nparticular kind of number implemented (e.g., bitwise operations for\nnon-integral numbers) should be left undefined.\n\nobject.__add__(self, other)\nobject.__sub__(self, other)\nobject.__mul__(self, other)\nobject.__floordiv__(self, other)\nobject.__mod__(self, other)\nobject.__divmod__(self, other)\nobject.__pow__(self, other[, modulo])\nobject.__lshift__(self, other)\nobject.__rshift__(self, other)\nobject.__and__(self, other)\nobject.__xor__(self, other)\nobject.__or__(self, other)\n\n These methods are called to implement the binary arithmetic\n operations (``+``, ``-``, ``*``, ``//``, ``%``, ``divmod()``,\n ``pow()``, ``**``, ``<<``, ``>>``, ``&``, ``^``, ``|``). For\n instance, to evaluate the expression ``x + y``, where *x* is an\n instance of a class that has an ``__add__()`` method,\n ``x.__add__(y)`` is called. The ``__divmod__()`` method should be\n the equivalent to using ``__floordiv__()`` and ``__mod__()``; it\n should not be related to ``__truediv__()`` (described below). Note\n that ``__pow__()`` should be defined to accept an optional third\n argument if the ternary version of the built-in ``pow()`` function\n is to be supported.\n\n If one of those methods does not support the operation with the\n supplied arguments, it should return ``NotImplemented``.\n\nobject.__div__(self, other)\nobject.__truediv__(self, other)\n\n The division operator (``/``) is implemented by these methods. The\n ``__truediv__()`` method is used when ``__future__.division`` is in\n effect, otherwise ``__div__()`` is used. If only one of these two\n methods is defined, the object will not support division in the\n alternate context; ``TypeError`` will be raised instead.\n\nobject.__radd__(self, other)\nobject.__rsub__(self, other)\nobject.__rmul__(self, other)\nobject.__rdiv__(self, other)\nobject.__rtruediv__(self, other)\nobject.__rfloordiv__(self, other)\nobject.__rmod__(self, other)\nobject.__rdivmod__(self, other)\nobject.__rpow__(self, other)\nobject.__rlshift__(self, other)\nobject.__rrshift__(self, other)\nobject.__rand__(self, other)\nobject.__rxor__(self, other)\nobject.__ror__(self, other)\n\n These methods are called to implement the binary arithmetic\n operations (``+``, ``-``, ``*``, ``/``, ``%``, ``divmod()``,\n ``pow()``, ``**``, ``<<``, ``>>``, ``&``, ``^``, ``|``) with\n reflected (swapped) operands. These functions are only called if\n the left operand does not support
57 'sequence-types': "\nEmulating container types\n*************************\n\nThe following methods can be defined to implement container objects.\nContainers usually are sequences (such as lists or tuples) or mappings\n(like dictionaries), but can represent other containers as well. The\nfirst set of methods is used either to emulate a sequence or to\nemulate a mapping; the difference is that for a sequence, the\nallowable keys should be the integers *k* for which ``0 <= k < N``\nwhere *N* is the length of the sequence, or slice objects, which\ndefine a range of items. (For backwards compatibility, the method\n``__getslice__()`` (see below) can also be defined to handle simple,\nbut not extended slices.) It is also recommended that mappings provide\nthe methods ``keys()``, ``values()``, ``items()``, ``has_key()``,\n``get()``, ``clear()``, ``setdefault()``, ``iterkeys()``,\n``itervalues()``, ``iteritems()``, ``pop()``, ``popitem()``,\n``copy()``, and ``update()`` behaving similar to those for Python's\nstandard dictionary objects. The ``UserDict`` module provides a\n``DictMixin`` class to help create those methods from a base set of\n``__getitem__()``, ``__setitem__()``, ``__delitem__()``, and\n``keys()``. Mutable sequences should provide methods ``append()``,\n``count()``, ``index()``, ``extend()``, ``insert()``, ``pop()``,\n``remove()``, ``reverse()`` and ``sort()``, like Python standard list\nobjects. Finally, sequence types should implement addition (meaning\nconcatenation) and multiplication (meaning repetition) by defining the\nmethods ``__add__()``, ``__radd__()``, ``__iadd__()``, ``__mul__()``,\n``__rmul__()`` and ``__imul__()`` described below; they should not\ndefine ``__coerce__()`` or other numerical operators. It is\nrecommended that both mappings and sequences implement the\n``__contains__()`` method to allow efficient use of the ``in``\noperator; for mappings, ``in`` should be equivalent of ``has_key()``;\nfor sequences, it should search through the values. It is further\nrecommended that both mappings and sequences implement the\n``__iter__()`` method to allow efficient iteration through the\ncontainer; for mappings, ``__iter__()`` should be the same as\n``iterkeys()``; for sequences, it should iterate through the values.\n\nobject.__len__(self)\n\n Called to implement the built-in function ``len()``. Should return\n the length of the object, an integer ``>=`` 0. Also, an object\n that doesn't define a ``__nonzero__()`` method and whose\n ``__len__()`` method returns zero is considered to be false in a\n Boolean context.\n\nobject.__getitem__(self, key)\n\n Called to implement evaluation of ``self[key]``. For sequence\n types, the accepted keys should be integers and slice objects.\n Note that the special interpretation of negative indexes (if the\n class wishes to emulate a sequence type) is up to the\n ``__getitem__()`` method. If *key* is of an inappropriate type,\n ``TypeError`` may be raised; if of a value outside the set of\n indexes for the sequence (after any special interpretation of\n negative values), ``IndexError`` should be raised. For mapping\n types, if *key* is missing (not in the container), ``KeyError``\n should be raised.\n\n Note: ``for`` loops expect that an ``IndexError`` will be raised for\n illegal indexes to allow proper detection of the end of the\n sequence.\n\nobject.__setitem__(self, key, value)\n\n Called to implement assignment to ``self[key]``. Same note as for\n ``__getitem__()``. This should only be implemented for mappings if\n the objects support changes to the values for keys, or if new keys\n can be added, or for sequences if elements can be replaced. The\n same exceptions should be raised for improper *key* values as for\n the ``__getitem__()`` method.\n\nobject.__delitem__(self, key)\n\n Called to implement deletion of ``self[key]``. Same note as for\n ``__getitem__()``. This should only be implemented for mappings if\n the objects support removal of keys, or for sequences if elements\n can be removed from the sequence. The same exceptions should be\n raised for improper *key* values as for the ``__getitem__()``\n method.\n\nobject.__iter__(self)\n\n This method is called when an iterator is required for a container.\n This method should return a new iterator object that can iterate\n over all the objects in the container. For mappings, it should\n iterate over the keys of the container, and should also be made\n available as the method ``iterkeys()``.\n\n Iterator objects also need to implement this method; they are\n required to return themselves. For more information on iterator\n objects, see *Iterator Types*.\n\nobject.__reversed__(self)\n\n Called (if present) by the ``reversed()`` built-in to implement\n reverse iteration. It should return a new iterator object that\n iterates over all the objects in the container in reverse order.\n\n If the ``__reversed__()`` method is not provided, the\n ``reversed()`` built-in will fall back to using the sequence\n protocol (``__len__()`` and ``__getitem__()``). Objects that\n support the sequence protocol should only provide\n ``__reversed__()`` if they can provide an implementation that is\n more efficient than the one provided by ``reversed()``.\n\n New in version 2.6.\n\nThe membership test operators (``in`` and ``not in``) are normally\nimplemented as an iteration through a sequence. However, container\nobjects can supply the following special method with a more efficient\nimplementation, which also does not require the object be a sequence.\n\nobject.__contains__(self, item)\n\n Called to implement membership test operators. Should return true\n if *item* is in *self*, false otherwise. For mapping objects, this\n should consider the keys of the mapping rather than the values or\n the key-item pairs.\n\n For objects that don't define ``__contains__()``, the membership\n test first tries iteration via ``__iter__()``, then the old\n sequence iteration protocol via ``__getitem__()``, see *this\n section in the language reference*.\n",
61 support custom comparison\n operations and are usable as dictionary keys.\n\n There are no swapped-argument versions of these methods (to be used\n when the left argument does not support the operation but the right\n argument does); rather, ``__lt__()`` and ``__gt__()`` are each\n other\'s reflection, ``__le__()`` and ``__ge__()`` are each other\'s\n reflection, and ``__eq__()`` and ``__ne__()`` are their own\n reflection.\n\n Arguments to rich comparison methods are never coerced.\n\n To automatically generate ordering operations from a single root\n operation, see ``functools.total_ordering()``.\n\nobject.__cmp__(self, other)\n\n Called by comparison operations if rich comparison (see above) is\n not defined. Should return a negative integer if ``self < other``,\n zero if ``self == other``, a positive integer if ``self > other``.\n If no ``__cmp__()``, ``__eq__()`` or ``__ne__()`` operation is\n defined, class instances are compared by object identity\n ("address"). See also the description of ``__hash__()`` for some\n important notes on creating *hashable* objects which supportsupport weak references to its instances. If weak\n reference support is needed, then add ``\'__weakref__\'`` to the\n sequence of strings in the *__slots__* declaration.\n\n Changed in version 2.3: Previously, adding ``\'__weakref__\'`` to the\n *__slots__* declaration would not enable support for weak\n references.\n\n* *__slots__* are implemented at the class level by creating\n descriptors (*Implementing Descriptors*) for each variable name. As\n a result, class attributes cannot be used to set default values for\n instance variables defined by *__slots__*; otherwise, the class\n attribute would overwrite the descriptor assignment.\n\n* The action of a *__slots__* declaration is limited to the class\n where it is defined. As a result, subclasses will have a *__dict__*\n unless they also define *__slots__* (which must only contain names\n of any *additional* slots).\n\n* If a class defines a slot also defined in a base class, the instance\n variable defined by the base class slot is inaccessible (except by\n retrieving its descriptor directly from the base class). This\n renders the meaning of the program undefined. In the future, a\n check may be added to prevent this.\n\n* Nonempty *__slots__* does not work for classes derived from\n "variable-length" built-in types such as ``long``, ``str`` and\n ``tuple``.\n\n* Any non-string iterable may be assigned to *__slots__*. Mappings may\n also be used; however, in the future, special meaning may be\n assigned to the values corresponding to each key.\n\n* *__class__* assignment works only if both classes have the same\n *__slots__*.\n\n Changed in version 2.6: Previously, *__class__* assignment raised an\n error if either new or old class had *__slots__*.\n\n\nCustomizing class creation\n==========================\n\nBy default, new-style classes are constructed using ``type()``. A\nclass definition is read into a separate namespace and the value of\nclass name is bound to the result of ``type(name, bases, dict)``.\n\nWhen the class definition is read, if *__metaclass__* is defined then\nthe callable assigned to it will be called instead of ``type()``. This\nallows classes or functions to be written which monitor or alter the\nclass creation process:\n\n* Modifying the class dictionary prior to the class being created.\n\n* Returning an instance of another class -- essentially performing the\n role of a factory function.\n\nThese steps will have to be performed in the metaclass\'s ``__new__()``\nmethod -- ``type.__new__()`` can then be called from this method to\ncreate a class with different properties. This example adds a new\nelement to the class dictionary before creating the class:\n\n class metacls(type):\n def __new__(mcs, name, bases, dict):\n dict[\'foo\'] = \'metacls was here\'\n return type.__new__(mcs, name, bases, dict)\n\nYou can of course also override other class methods (or add new\nmethods); for example defining a custom ``__call__()`` method in the\nmetaclass allows custom behavior when the class is called, e.g. not\nalways creating a new instance.\n\n__metaclass__\n\n This variable can be any callable accepting arguments for ``name``,\n ``bases``, and ``dict``. Upon class creation, the callable is used\n instead of the built-in ``type()``.\n\n New in version 2.2.\n\nThe appropriate metaclass is determined by the following precedence\nrules:\n\n* If ``dict[\'__metaclass__\']`` exists, it is used.\n\n* Otherwise, if there is at least one base class, its metaclass is\n used (this looks for a *__class__* attribute first and if not found,\n uses its type).\n\n* Otherwise, if a global variable named __metaclass__ exists, it is\n used.\n\n* Otherwise, the old-style, classic metaclass (types.ClassType) is\n used.\n\nThe potential uses for metaclasses are boundless. Some ideas that have\nbeen explored including logging, interface checking, automatic\ndelegation, automatic property creation, proxies, frameworks, and\nautomatic resource locking/synchronization.\n\n\nCustomizing instance and subclass checks\n========================================\n\nNew in version 2.6.\n\nThe following methods are used to override the default behavior of the\n``isinstance()`` and ``issubclass()`` built-in functions.\n\nIn particular, the metaclass ``abc.ABCMeta`` implements these methods\nin order to allow the addition of Abstract Base Classes (ABCs) as\n"virtual base classes" to any class or type (including built-in\ntypes), including other ABCs.\n\nclass.__instancecheck__(self, instance)\n\n Return true if *instance* should be considered a (direct or\n indirect) instance of *class*. If defined, called to implement\n ``isinstance(instance, class)``.\n\nclass.__subclasscheck__(self, subclass)\n\n Return true if *subclass* should be considered a (direct or\n indirect) subclass of *class*. If defined, called to implement\n ``issubclass(subclass, class)``.\n\nNote that these methods are looked up on the type (metaclass) of a\nclass. They cannot be defined as class methods in the actual class.\nThis is consistent with the lookup of special methods that are called\non instances, only in this case the instance is itself a class.\n\nSee also:\n\n **PEP 3119** - Introducing Abstract Base Classes\n Includes the specification for customizing ``isinstance()`` and\n ``issubclass()`` behavior through ``__instancecheck__()`` and\n ``__subclasscheck__()``, with motivation for this functionality\n in the context of adding Abstract Base Classes (see the ``abc``\n module) to the language.\n\n\nEmulating callable objects\n==========================\n\nobject.__call__(self[, args...])\n\n Called when the instance is "called" as a function; if this method\n is defined, ``x(arg1, arg2, ...)`` is a shorthand for\n ``x.__call__(arg1, arg2, ...)``.\n\n\nEmulating container types\n=========================\n\nThe following methods can be defined to implement container objects.\nContainers usually are sequences (such as lists or tuples) or mappings\n(like dictionaries), but can represent other containers as well. The\nfirst set of methods is used either to emulate a sequence or to\nemulate a mapping; the difference is that for a sequence, the\nallowable keys should be the integers *k* for which ``0 <= k < N``\nwhere *N* is the length of the sequence, or slice objects, which\ndefine a range of items. (For backwards compatibility, the method\n``__getslice__()`` (see below) can also be defined to handle simple,\nbut not extended slices.) It is also recommended that mappings provide\nthe methods ``keys()``, ``values()``, ``items()``, ``has_key()``,\n``get()``, ``clear()``, ``setdefault()``, ``iterkeys()``,\n``itervalues()``, ``iteritems()``, ``pop()``, ``popitem()``,\n``copy()``, and ``update()`` behaving similar to those for Python\'s\nstandard dictionary objects. The ``UserDict`` module provides a\n``DictMixin`` class to help create those methods from a base set of\n``__getitem__()``, ``__setitem__()``, ``__delitem__()``, and\n``keys()``. Mutable sequences should provide methods ``append()``,\n``count()``, ``index()``, ``extend()``, ``insert()``, ``pop()``,\n``remove()``, ``reverse()`` and ``sort()``, like Python standard list\nobjects. Finally, sequence types should implement addition (meaning\nconcatenation) and multiplication (meaning repetition) by defining the\nmethods ``__add__()``, ``__radd__()``, ``__iadd__()``, ``__mul__()``,\n``__rmul__()`` and ``__imul__()`` described below; they should not\ndefine ``__coerce__()`` or other numerical operators. It is\nrecommended that both mappings and sequences implement the\n``__contains__()`` method to allow efficient use of the ``in``\noperator; for mappings, ``in`` should be equivalent of ``has_key()``;\nfor sequences, it should search through the values. It is further\nrecommended that both mappings and sequences implement the\n``__iter__()`` method to allow efficient iteration through the\ncontainer; for mappings, ``__iter__()`` should be the same as\n``iterkeys()``; for sequences, it should iterate through the values.\n\nobject.__len__(self)\n\n Called to implement the built-in function ``len()``. Should return\n the length of the object, an integer ``>=`` 0. Also, an object\n that doesn\'t define a ``__nonzero__()`` method and whose\n ``__len__()`` method returns zero is considered to be false in a\n Boolean context.\n\nobject.__getitem__(self, key)\n\n Called to implement evaluation of ``self[key]``. For sequence\n types, the accepted keys should be integers and slice objects.\n Note that the special interpretation of negative indexes (if the\n class wishes to emulate a sequence type) is up to the\n ``__getitem__()`` method. If *key* is of an inappropriate type,\n ``TypeError`` may be raised; if of a value outside the set of\n indexes for the sequence (after any special interpretation of\n negative values), ``IndexError`` should be raised. For mapping\n types, if *key* is missing (not in the container), ``KeyError``\n should be raised.\n\n Note: ``for`` loops expect that an ``IndexError`` will be raised for\n illegal indexes to allow proper detection of the end of the\n sequence.\n\nobject.__setitem__(self, key, value)\n\n Called to implement assignment to ``self[key]``. Same note as for\n ``__getitem__()``. This should only be implemented for mappings if\n the objects support changes to the values for keys, or if new keys\n can be added, or for sequences if elements can be replaced. The\n same exceptions should be raised for improper *key* values as for\n the ``__getitem__()`` method.\n\nobject.__delitem__(self, key)\n\n Called to implement deletion of ``self[key]``. Same note as for\n ``__getitem__()``. This should only be implemented for mappings if\n the objects support removal of keys, or for sequences if elements\n can be removed from the sequence. The same exceptions should be\n raised for improper *key* values as for the ``__getitem__()``\n method.\n\nobject.__iter__(self)\n\n This method is called when an iterator is required for a container.\n This method should return a new iterator object that can iterate\n over all the objects in the container. For mappings, it should\n iterate over the keys of the container, and should also be made\n available as the method ``iterkeys()``.\n\n Iterator objects also need to implement this method; they are\n required to return themselves. For more information on iterator\n objects, see *Iterator Types*.\n\nobject.__reversed__(self)\n\n Called (if present) by the ``reversed()`` built-in to implement\n reverse iteration. It should return a new iterator object that\n iterates over all the objects in the container in reverse order.\n\n If the ``__reversed__()`` method is not provided, the\n ``reversed()`` built-in will fall back to using the sequence\n protocol (``__len__()`` and ``__getitem__()``). Objects that\n support the sequence protocol should only provide\n ``__reversed__()`` if they can provide an implementation that is\n more efficient than the one provided by ``reversed()``.\n\n New in version 2.6.\n\nThe membership test operators (``in`` and ``not in``) are normally\nimplemented as an iteration through a sequence. However, container\nobjects can supply the following special method with a more efficient\nimplementation, which also does not require the object be a sequence.\n\nobject.__contains__(self, item)\n\n Called to implement membership test operators. Should return true\n if *item* is in *self*, false otherwise. For mapping objects, this\n should consider the keys of the mapping rather than the values or\n the key-item pairs.\n\n For objects that don\'t define ``__contains__()``, the membership\n test first tries iteration via ``__iter__()``, then the old\n sequence iteration protocol via ``__getitem__()``, see *this\n section in the language reference*.\n\n\nAdditional methods for emulation of sequence types\n==================================================\n\nThe following optional methods can be defined to further emulate\nsequence objects. Immutable sequences methods should at most only\ndefine ``__getslice__()``; mutable sequences might define all three\nmethods.\n\nobject.__getslice__(self, i, j)\n\n Deprecated since version 2.0: Supportsupport\nslice objects as arguments):\n\n class MyClass:\n ...\n def __getitem__(self, index):\n ...\n def __setitem__(self, index, value):\n ...\n def __delitem__(self, index):\n ...\n\n if sys.version_info < (2, 0):\n # They won\'t be defined if version is at least 2.0 final\n\n def __getslice__(self, i, j):\n return self[max(0, i):max(0, j):]\n def __setslice__(self, i, j, seq):\n self[max(0, i):max(0, j):] = seq\n def __delslice__(self, i, j):\n del self[max(0, i):max(0, j):]\n ...\n\nNote the calls to ``max()``; these are necessary because of the\nhandling of negative indices before the ``__*slice__()`` methods are\ncalled. When negative indexes are used, the ``__*item__()`` methods\nreceive them as provided, but the ``__*slice__()`` methods get a\n"cooked" form of the index values. For each negative index value, the\nlength of the sequence is added to the index before calling the method\n(which may still result in a negative index); this is the customary\nhandling of negative indexes by the built-in sequence types, and the\n``__*item__()`` methods are expected to do this as well. However,\nsince they should already be doing that, negative indexes cannot be\npassed in; they must be constrained to the bounds of the sequence\nbefore being passed to the ``__*item__()`` methods. Calling ``max(0,\ni)`` conveniently returns the proper value.\n\n\nEmulating numeric types\n=======================\n\nThe following methods can be defined to emulate numeric objects.\nMethods corresponding to operations that are not supported by the\nparticular kind of number implemented (e.g., bitwise operations for\nnon-integral numbers) should be left undefined.\n\nobject.__add__(self, other)\nobject.__sub__(self, other)\nobject.__mul__(self, other)\nobject.__floordiv__(self, other)\nobject.__mod__(self, other)\nobject.__divmod__(self, other)\nobject.__pow__(self, other[, modulo])\nobject.__lshift__(self, other)\nobject.__rshift__(self, other)\nobject.__and__(self, other)\nobject.__xor__(self, other)\nobject.__or__(self, other)\n\n These methods are called to implement the binary arithmetic\n operations (``+``, ``-``, ``*``, ``//``, ``%``, ``divmod()``,\n ``pow()``, ``**``, ``<<``, ``>>``, ``&``, ``^``, ``|``). For\n instance, to evaluate the expression ``x + y``, where *x* is an\n instance of a class that has an ``__add__()`` method,\n ``x.__add__(y)`` is called. The ``__divmod__()`` method should be\n the equivalent to using ``__floordiv__()`` and ``__mod__()``; it\n should not be related to ``__truediv__()`` (described below). Note\n that ``__pow__()`` should be defined to accept an optional third\n argument if the ternary version of the built-in ``pow()`` function\n is to be supported.\n\n If one of those methods does not support the operation with the\n supplied arguments, it should return ``NotImplemented``.\n\nobject.__div__(self, other)\nobject.__truediv__(self, other)\n\n The division operator (``/``) is implemented by these methods. The\n ``__truediv__()`` method is used when ``__future__.division`` is in\n effect, otherwise ``__div__()`` is used. If only one of these two\n methods is defined, the object will not support division in the\n alternate context; ``TypeError`` will be raised instead.\n\nobject.__radd__(self, other)\nobject.__rsub__(self, other)\nobject.__rmul__(self, other)\nobject.__rdiv__(self, other)\nobject.__rtruediv__(self, other)\nobject.__rfloordiv__(self, other)\nobject.__rmod__(self, other)\nobject.__rdivmod__(self, other)\nobject.__rpow__(self, other)\nobject.__rlshift__(self, other)\nobject.__rrshift__(self, other)\nobject.__rand__(self, other)\nobject.__rxor__(self, other)\nobject.__ror__(self, other)\n\n These methods are called to implement the binary arithmetic\n operations (``+``, ``-``, ``*``, ``/``, ``%``, ``divmod()``,\n ``pow()``, ``**``, ``<<``, ``>>``, ``&``, ``^``, ``|``) with\n reflected (swapped) operands. These functions are only called if\n the left operand does not support
62 'string-methods': '\nString Methods\n**************\n\nBelow are listed the string methods which both 8-bit strings and\nUnicode objects support. Some of them are also available on\n``bytearray`` objects.\n\nIn addition, Python\'s strings support the sequence type methods\ndescribed in the *Sequence Types --- str, unicode, list, tuple,\nbytearray, buffer, xrange* section. To output formatted strings use\ntemplate strings or the ``%`` operator described in the *String\nFormatting Operations* section. Also, see the ``re`` module for string\nfunctions based on regular expressions.\n\nstr.capitalize()\n\n Return a copy of the string with its first character capitalized\n and the rest lowercased.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.center(width[, fillchar])\n\n Return centered in a string of length *width*. Padding is done\n using the specified *fillchar* (default is a space).\n\n Changed in version 2.4: Support for the *fillchar* argument.\n\nstr.count(sub[, start[, end]])\n\n Return the number of non-overlapping occurrences of substring *sub*\n in the range [*start*, *end*]. Optional arguments *start* and\n *end* are interpreted as in slice notation.\n\nstr.decode([encoding[, errors]])\n\n Decodes the string using the codec registered for *encoding*.\n *encoding* defaults to the default string encoding. *errors* may\n be given to set a different error handling scheme. The default is\n ``\'strict\'``, meaning that encoding errors raise ``UnicodeError``.\n Other possible values are ``\'ignore\'``, ``\'replace\'`` and any other\n name registered via ``codecs.register_error()``, see section *Codec\n Base Classes*.\n\n New in version 2.2.\n\n Changed in version 2.3: Support for other error handling schemes\n added.\n\n Changed in version 2.7: Support for keyword arguments added.\n\nstr.encode([encoding[, errors]])\n\n Return an encoded version of the string. Default encoding is the\n current default string encoding. *errors* may be given to set a\n different error handling scheme. The default for *errors* is\n ``\'strict\'``, meaning that encoding errors raise a\n ``UnicodeError``. Other possible values are ``\'ignore\'``,\n ``\'replace\'``, ``\'xmlcharrefreplace\'``, ``\'backslashreplace\'`` and\n any other name registered via ``codecs.register_error()``, see\n section *Codec Base Classes*. For a list of possible encodings, see\n section *Standard Encodings*.\n\n New in version 2.0.\n\n Changed in version 2.3: Support for ``\'xmlcharrefreplace\'`` and\n ``\'backslashreplace\'`` and other error handling schemes added.\n\n Changed in version 2.7: Support for keyword arguments added.\n\nstr.endswith(suffix[, start[, end]])\n\n Return ``True`` if the string ends with the specified *suffix*,\n otherwise return ``False``. *suffix* can also be a tuple of\n suffixes to look for. With optional *start*, test beginning at\n that position. With optional *end*, stop comparing at that\n position.\n\n Changed in version 2.5: Accept tuples as *suffix*.\n\nstr.expandtabs([tabsize])\n\n Return a copy of the string where all tab characters are replaced\n by one or more spaces, depending on the current column and the\n given tab size. Tab positions occur every *tabsize* characters\n (default is 8, giving tab positions at columns 0, 8, 16 and so on).\n To expand the string, the current column is set to zero and the\n string is examined character by character. If the character is a\n tab (``\\t``), one or more space characters are inserted in the\n result until the current column is equal to the next tab position.\n (The tab character itself is not copied.) If the character is a\n newline (``\\n``) or return (``\\r``), it is copied and the current\n column is reset to zero. Any other character is copied unchanged\n and the current column is incremented by one regardless of how the\n character is represented when printed.\n\n >>> \'01\\t012\\t0123\\t01234\'.expandtabs()\n \'01 012 0123 01234\'\n >>> \'01\\t012\\t0123\\t01234\'.expandtabs(4)\n \'01 012 0123 01234\'\n\nstr.find(sub[, start[, end]])\n\n Return the lowest index in the string where substring *sub* is\n found, such that *sub* is contained in the slice ``s[start:end]``.\n Optional arguments *start* and *end* are interpreted as in slice\n notation. Return ``-1`` if *sub* is not found.\n\n Note: The ``find()`` method should be used only if you need to know the\n position of *sub*. To check if *sub* is a substring or not, use\n the ``in`` operator:\n\n >>> \'Py\' in \'Python\'\n True\n\nstr.format(*args, **kwargs)\n\n Perform a string formatting operation. The string on which this\n method is called can contain literal text or replacement fields\n delimited by braces ``{}``. Each replacement field contains either\n the numeric index of a positional argument, or the name of a\n keyword argument. Returns a copy of the string where each\n replacement field is replaced with the string value of the\n corresponding argument.\n\n >>> "The sum of 1 + 2 is {0}".format(1+2)\n \'The sum of 1 + 2 is 3\'\n\n See *Format String Syntax* for a description of the various\n formatting options that can be specified in format strings.\n\n This method of string formatting is the new standard in Python 3,\n and should be preferred to the ``%`` formatting described in\n *String Formatting Operations* in new code.\n\n New in version 2.6.\n\nstr.index(sub[, start[, end]])\n\n Like ``find()``, but raise ``ValueError`` when the substring is not\n found.\n\nstr.isalnum()\n\n Return true if all characters in the string are alphanumeric and\n there is at least one character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.isalpha()\n\n Return true if all characters in the string are alphabetic and\n there is at least one character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.isdigit()\n\n Return true if all characters in the string are digits and there is\n at least one character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.islower()\n\n Return true if all cased characters [4] in the string are lowercase\n and there is at least one cased character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.isspace()\n\n Return true if there are only whitespace characters in the string\n and there is at least one character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.istitle()\n\n Return true if the string is a titlecased string and there is at\n least one character, for example uppercase characters may only\n follow uncased characters and lowercase characters only cased ones.\n Return false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.isupper()\n\n Return true if all cased characters [4] in the string are uppercase\n and there is at least one cased character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.join(iterable)\n\n Return a string which is the concatenation of the strings in the\n *iterable* *iterable*. The separator between elements is the\n string providing this method.\n\nstr.ljust(width[, fillchar])\n\n Return the string left justified in a string of length *width*.\n Padding is done using the specified *fillchar* (default is a\n space). The original string is returned if *width* is less than or\n equal to ``len(s)``.\n\n Changed in version 2.4: Support for the *fillchar* argument.\n\nstr.lower()\n\n Return a copy of the string with all the cased characters [4]\n converted to lowercase.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.lstrip([chars])\n\n Return a copy of the string with leading characters removed. The\n *chars* argument is a string specifying the set of characters to be\n removed. If omitted or ``None``, the *chars* argument defaults to\n removing whitespace. The *chars* argument is not a prefix; rather,\n all combinations of its values are stripped:\n\n >>> \' spacious \'.lstrip()\n \'spacious \'\n >>> \'www.example.com\'.lstrip(\'cmowz.\')\n \'example.com\'\n\n Changed in version 2.2.2: Support for the *chars* argument.\n\nstr.partition(sep)\n\n Split the string at the first occurrence of *sep*, and return a\n 3-tuple containing the part before the separator, the separator\n itself, and the part after the separator. If the separator is not\n found, return a 3-tuple containing the string itself, followed by\n two empty strings.\n\n New in version 2.5.\n\nstr.replace(old, new[, count])\n\n Return a copy of the string with all occurrences of substring *old*\n replaced by *new*. If the optional argument *count* is given, only\n the first *count* occurrences are replaced.\n\nstr.rfind(sub[, start[, end]])\n\n Return the highest index in the string where substring *sub* is\n found, such that *sub* is contained within ``s[start:end]``.\n Optional arguments *start* and *end* are interpreted as in slice\n notation. Return ``-1`` on failure.\n\nstr.rindex(sub[, start[, end]])\n\n Like ``rfind()`` but raises ``ValueError`` when the substring *sub*\n is not found.\n\nstr.rjust(width[, fillchar])\n\n Return the string right justified in a string of length *width*.\n Padding is done using the specified *fillchar* (default is a\n space). The original string is returned if *width* is less than or\n equal to ``len(s)``.\n\n Changed in version 2.4: Support for the *fillchar* argument.\n\nstr.rpartition(sep)\n\n Split the string at the last occurrence of *sep*, and return a\n 3-tuple containing the part before the separator, the separator\n itself, and the part after the separator. If the separator is not\n found, return a 3-tuple containing two empty strings, followed by\n the string itself.\n\n New in version 2.5.\n\nstr.rsplit([sep[, maxsplit]])\n\n Return a list of the words in the string, using *sep* as the\n delimiter string. If *maxsplit* is given, at most *maxsplit* splits\n are done, the *rightmost* ones. If *sep* is not specified or\n ``None``, any whitespace string is a separator. Except for\n splitting from the right, ``rsplit()`` behaves like ``split()``\n which is described in detail below.\n\n New in version 2.4.\n\nstr.rstrip([chars])\n\n Return a copy of the string with trailing characters removed. The\n *chars* argument is a string specifying the set of characters to be\n removed. If omitted or ``None``, the *chars* argument defaults to\n removing whitespace. The *chars* argument is not a suffix; rather,\n all combinations of its values are stripped:\n\n >>> \' spacious \'.rstrip()\n \' spacious\'\n >>> \'mississippi\'.rstrip(\'ipz\')\n \'mississ\'\n\n Changed in version 2.2.2: SupportSupport for the *chars* argument.\n\nstr.swapcase()\n\n Return a copy of the string with uppercase characters converted to\n lowercase and vice versa.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.title()\n\n Return a titlecased version of the string where words start with an\n uppercase character and the remaining characters are lowercase.\n\n The algorithm uses a simple language-independent definition of a\n word as groups of consecutive letters. The definition works in\n many contexts but it means that apostrophes in contractions and\n possessives form word boundaries, which may not be the desired\n result:\n\n >>> "they\'re bill\'s friends from the UK".title()\n "They\'Re Bill\'S Friends From The Uk"\n\n A workaround for apostrophes can be constructed using regular\n expressions:\n\n >>> import re\n >>> def titlecase(s):\n ... return re.sub(r"[A-Za-z]+(\'[A-Za-z]+)?",\n ... lambda mo: mo.group(0)[0].upper() +\n ... mo.group(0)[1:].lower(),\n ... s)\n ...\n >>> titlecase("they\'re bill\'s friends.")\n "They\'re Bill\'s Friends."\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.translate(table[, deletechars])\n\n Return a copy of the string where all characters occurring in the\n optional argument *deletechars* are removed, and the remaining\n characters have been mapped through the given translation table,\n which must be a string of length 256.\n\n You can use the ``maketrans()`` helper function in the ``string``\n module to create a translation table. For string objects, set the\n *table* argument to ``None`` for translations that only delete\n characters:\n\n >>> \'read this short text\'.translate(None, \'aeiou\')\n \'rd ths shrt txt\'\n\n New in version 2.6: Support for a ``None`` *table* argument.\n\n For Unicode objects, the ``translate()`` method does not accept the\n optional *deletechars* argument. Instead, it returns a copy of the\n *s* where all characters have been mapped through the given\n translation table which must be a mapping of Unicode ordinals to\n Unicode ordinals, Unicode strings or ``None``. Unmapped characters\n are left untouched. Characters mapped to ``None`` are deleted.\n Note, a more flexible approach is to create a custom character\n mapping codec using the ``codecs`` module (see ``encodings.cp1251``\n for an example).\n\nstr.upper()\n\n Return a copy of the string with all the cased characters [4]\n converted to uppercase. Note that ``str.upper().isupper()`` might\n be ``False`` if ``s`` contains uncased characters or if the Unicode\n category of the resulting character(s) is not "Lu" (Letter,\n uppercase), but e.g. "Lt" (Letter, titlecase).\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.zfill(width)\n\n Return the numeric string left filled with zeros in a string of\n length *width*. A sign prefix is handled correctly. The original\n string is returned if *width* is less than or equal to ``len(s)``.\n\n New in version 2.2.2.\n\nThe following methods are present only on unicode objects:\n\nunicode.isnumeric()\n\n Return ``True`` if there are only numeric characters in S,\n ``False`` otherwise. Numeric characters include digit characters,\n and all characters that have the Unicode numeric value property,\n e.g. U+2155, VULGAR FRACTION ONE FIFTH.\n\nunicode.isdecimal()\n\n Return ``True`` if there are only decimal characters in S,\n ``False`` otherwise. Decimal characters include digit characters,\n and all characters that can be used to form decimal-radix numbers,\n e.g. U+0660, ARABIC-INDIC DIGIT ZERO.\n',
67 'types': '\nThe standard type hierarchy\n***************************\n\nBelow is a list of the types that are built into Python. Extension\nmodules (written in C, Java, or other languages, depending on the\nimplementation) can define additional types. Future versions of\nPython may add types to the type hierarchy (e.g., rational numbers,\nefficiently stored arrays of integers, etc.).\n\nSome of the type descriptions below contain a paragraph listing\n\'special attributes.\' These are attributes that provide access to the\nimplementation and are not intended for general use. Their definition\nmay change in the future.\n\nNone\n This type has a single value. There is a single object with this\n value. This object is accessed through the built-in name ``None``.\n It is used to signify the absence of a value in many situations,\n e.g., it is returned from functions that don\'t explicitly return\n anything. Its truth value is false.\n\nNotImplemented\n This type has a single value. There is a single object with this\n value. This object is accessed through the built-in name\n ``NotImplemented``. Numeric methods and rich comparison methods may\n return this value if they do not implement the operation for the\n operands provided. (The interpreter will then try the reflected\n operation, or some other fallback, depending on the operator.) Its\n truth value is true.\n\nEllipsis\n This type has a single value. There is a single object with this\n value. This object is accessed through the built-in name\n ``Ellipsis``. It is used to indicate the presence of the ``...``\n syntax in a slice. Its truth value is true.\n\n``numbers.Number``\n These are created by numeric literals and returned as results by\n arithmetic operators and arithmetic built-in functions. Numeric\n objects are immutable; once created their value never changes.\n Python numbers are of course strongly related to mathematical\n numbers, but subject to the limitations of numerical representation\n in computers.\n\n Python distinguishes between integers, floating point numbers, and\n complex numbers:\n\n ``numbers.Integral``\n These represent elements from the mathematical set of integers\n (positive and negative).\n\n There are three types of integers:\n\n Plain integers\n These represent numbers in the range -2147483648 through\n 2147483647. (The range may be larger on machines with a\n larger natural word size, but not smaller.) When the result\n of an operation would fall outside this range, the result is\n normally returned as a long integer (in some cases, the\n exception ``OverflowError`` is raised instead). For the\n purpose of shift and mask operations, integers are assumed to\n have a binary, 2\'s complement notation using 32 or more bits,\n and hiding no bits from the user (i.e., all 4294967296\n different bit patterns correspond to different values).\n\n Long integers\n These represent numbers in an unlimited range, subject to\n available (virtual) memory only. For the purpose of shift\n and mask operations, a binary representation is assumed, and\n negative numbers are represented in a variant of 2\'s\n complement which gives the illusion of an infinite string of\n sign bits extending to the left.\n\n Booleans\n These represent the truth values False and True. The two\n objects representing the values False and True are the only\n Boolean objects. The Boolean type is a subtype of plain\n integers, and Boolean values behave like the values 0 and 1,\n respectively, in almost all contexts, the exception being\n that when converted to a string, the strings ``"False"`` or\n ``"True"`` are returned, respectively.\n\n The rules for integer representation are intended to give the\n most meaningful interpretation of shift and mask operations\n involving negative integers and the least surprises when\n switching between the plain and long integer domains. Any\n operation, if it yields a result in the plain integer domain,\n will yield the same result in the long integer domain or when\n using mixed operands. The switch between domains is transparent\n to the programmer.\n\n ``numbers.Real`` (``float``)\n These represent machine-level double precision floating point\n numbers. You are at the mercy of the underlying machine\n architecture (and C or Java implementation) for the accepted\n range and handling of overflow. Python does not support single-\n precision floating point numbers; the savings in processor and\n memory usage that are usually the reason for using these is\n dwarfed by the overhead of using objects in Python, so there is\n no reason to complicate the language with two kinds of floating\n point numbers.\n\n ``numbers.Complex``\n These represent complex numbers as a pair of machine-level\n double precision floating point numbers. The same caveats apply\n as for floating point numbers. The real and imaginary parts of a\n complex number ``z`` can be retrieved through the read-only\n attributes ``z.real`` and ``z.imag``.\n\nSequences\n These represent finite ordered sets indexed by non-negative\n numbers. The built-in function ``len()`` returns the number of\n items of a sequence. When the length of a sequence is *n*, the\n index set contains the numbers 0, 1, ..., *n*-1. Item *i* of\n sequence *a* is selected by ``a[i]``.\n\n Sequences also support slicing: ``a[i:j]`` selects all items with\n index *k* such that *i* ``<=`` *k* ``<`` *j*. When used as an\n expression, a slice is a sequence of the same type. This implies\n that the index set is renumbered so that it starts at 0.\n\n Some sequences also supportsupport getting and setting arbitrary\n attributes, which can be used, for example, to attach metadata\n to functions. Regular attribute dot-notation is used to get and\n set such attributes. *Note that the current implementation only\n supports function attributes on user-defined functions. Function\n attributes on built-in functions may be supported in the\n future.*\n\n Additional information about a function\'s definition can be\n retrieved from its code object; see the description of internal\n types below.\n\n User-defined methods\n A user-defined method object combines a class, a class instance\n (or ``None``) and any callable object (normally a user-defined\n function).\n\n Special read-only attributes: ``im_self`` is the class instance\n object, ``im_func`` is the function object; ``im_class`` is the\n class of ``im_self`` for bound methods or the class that asked\n for the method for unbound methods; ``__doc__`` is the method\'s\n documentation (same as ``im_func.__doc__``); ``__name__`` is the\n method name (same as ``im_func.__name__``); ``__module__`` is\n the name of the module the method was defined in, or ``None`` if\n unavailable.\n\n Changed in version 2.2: ``im_self`` used to refer to the class\n that defined the method.\n\n Changed in version 2.6: For Python 3 forward-compatibility,\n ``im_func`` is also available as ``__func__``, and ``im_self``\n as ``__self__``.\n\n Methods also support accessing (but not setting) the arbitrary\n function attributes on the underlying function object.\n\n User-defined method objects may be created when getting an\n attribute of a class (perhaps via an instance of that class), if\n that attribute is a user-defined function object, an unbound\n user-defined method object, or a class method object. When the\n attribute is a user-defined method object, a new method object\n is only created if the class from which it is being retrieved is\n the same as, or a derived class of, the class stored in the\n original method object; otherwise, the original method object is\n used as it is.\n\n When a user-defined method object is created by retrieving a\n user-defined function object from a class, its ``im_self``\n attribute is ``None`` and the method object is said to be\n unbound. When one is created by retrieving a user-defined\n function object from a class via one of its instances, its\n ``im_self`` attribute is the instance, and the method object is\n said to be bound. In either case, the new method\'s ``im_class``\n attribute is the class from which the retrieval takes place, and\n its ``im_func`` attribute is the original function object.\n\n When a user-defined method object is created by retrieving\n another method object from a class or instance, the behaviour is\n the same as for a function object, except that the ``im_func``\n attribute of the new instance is not the original method object\n but its ``im_func`` attribute.\n\n When a user-defined method object is created by retrieving a\n class method object from a class or instance, its ``im_self``\n attribute is the class itself, and its ``im_func`` attribute is\n the function object underlying the class method.\n\n When an unbound user-defined method object is called, the\n underlying function (``im_func``) is called, with the\n restriction that the first argument must be an instance of the\n proper class (``im_class``) or of a derived class thereof.\n\n When a bound user-defined method object is called, the\n underlying function (``im_func``) is called, inserting the class\n instance (``im_self``) in front of the argument list. For\n instance, when ``C`` is a class which contains a definition for\n a function ``f()``, and ``x`` is an instance of ``C``, calling\n ``x.f(1)`` is equivalent to calling ``C.f(x, 1)``.\n\n When a user-defined method object is derived from a class method\n object, the "class instance" stored in ``im_self`` will actually\n be the class itself, so that calling either ``x.f(1)`` or\n ``C.f(1)`` is equivalent to calling ``f(C,1)`` where ``f`` is\n the underlying function.\n\n Note that the transformation from function object to (unbound or\n bound) method object happens each time the attribute is\n retrieved from the class or instance. In some cases, a fruitful\n optimization is to assign the attribute to a local variable and\n call that local variable. Also notice that this transformation\n only happens for user-defined functions; other callable objects\n (and all non-callable objects) are retrieved without\n transformation. It is also important to note that user-defined\n functions which are attributes of a class instance are not\n converted to bound methods; this *only* happens when the\n function is an attribute of the class.\n\n Generator functions\n A function or method which uses the ``yield`` statement (see\n section *The yield statement*) is called a *generator function*.\n Such a function, when called, always returns an iterator object\n which can be used to execute the body of the function: calling\n the iterator\'s ``next()`` method will cause the function to\n execute until it provides a value using the ``yield`` statement.\n When the function executes a ``return`` statement or falls off\n the end, a ``StopIteration`` exception is raised and the\n iterator will have reached the end of the set of values to be\n returned.\n\n Built-in functions\n A built-in function object is a wrapper around a C function.\n Examples of built-in functions are ``len()`` and ``math.sin()``\n (``math`` is a standard built-in module). The number and type of\n the arguments are determined by the C function. Special read-\n only attributes: ``__doc__`` is the function\'s documentation\n string, or ``None`` if unavailable; ``__name__`` is the\n function\'s name; ``__self__`` is set to ``None`` (but see the\n next item); ``__module__`` is the name of the module the\n function was defined in or ``None`` if unavailable.\n\n Built-in methods\n This is really a different disguise of a built-in function, this\n time containing an object passed to the C function as an\n implicit extra argument. An example of a built-in method is\n ``alist.append()``, assuming *alist* is a list object. In this\n case, the special read-only attribute ``__self__`` is set to the\n object denoted by *alist*.\n\n Class Types\n Class types, or "new-style classes," are callable. These\n objects normally act as factories for new instances of\n themselves, but variations are possible for class types that\n override ``__new__()``. The arguments of the call are passed to\n ``__new__()`` and, in the typical case, to ``__init__()`` to\n initialize the new instance.\n\n Classic Classes\n Class objects are described below. When a class object is\n called, a new class instance (also described below) is created\n and returned. This implies a call to the class\'s ``__init__()``\n method if it has one. Any arguments are passed on to the\n ``__init__()`` method. If there is no ``__init__()`` method,\n the class must be called without arguments.\n\n Class instances\n Class instances are described below. Class instances are\n callable only when the class has a ``__call__()`` method;\n ``x(arguments)`` is a shorthand for ``x.__call__(arguments)``.\n\nModules\n Modules are imported by the ``import`` statement (see section *The\n import statement*). A module object has a namespace implemented by\n a dictionary object (this is the dictionary referenced by the\n func_globals attribute of functions defined in the module).\n Attribute references are translated to lookups in this dictionary,\n e.g., ``m.x`` is equivalent to ``m.__dict__["x"]``. A module object\n does not contain the code object used to initialize the module\n (since it isn\'t needed once the initialization is done).\n\n Attribute assignment updates the module\'s namespace dictionary,\n e.g., ``m.x = 1`` is equivalent to ``m.__dict__["x"] = 1``.\n\n Special read-only attribute: ``__dict__`` is the module\'s namespace\n as a dictionary object.\n\n **CPython implementation detail:** Because of the way CPython\n clears module dictionaries, the module dictionary will be cleared\n when the module falls out of scope even if the dictionary still has\n live references. To avoid this, copy the dictionary or keep the\n module around while using its dictionary directly.\n\n Predefined (writable) attributes: ``__name__`` is the module\'s\n name; ``__doc__`` is the module\'s documentation string, or ``None``\n if unavailable; ``__file__`` is the pathname of the file from which\n the module was loaded, if it was loaded from a file. The\n ``__file__`` attribute is not present for C modules that are\n statically linked into the interpreter; for extension modules\n loaded dynamically from a shared library, it is the pathname of the\n shared library file.\n\nClasses\n Both class types (new-style classes) and class objects (old-\n style/classic classes) are typically created by class definitions\n (see section *Class definitions*). A class has a namespace\n implemented by a dictionary object. Class attribute references are\n translated to lookups in this dictionary, e.g., ``C.x`` is\n translated to ``C.__dict__["x"]`` (although for new-style classes\n in particular there are a number of hooks which allow for other\n means of locating attributes). When the attribute name is not found\n there, the attribute search continues in the base classes. For\n old-style classes, the search is depth-first, left-to-right in the\n order of occurrence in the base class list. New-style classes use\n the more complex C3 method resolution order which behaves correctly\n even in the presence of \'diamond\' inheritance structures where\n there are multiple inheritance paths leading back to a common\n ancestor. Additional details on the C3 MRO used by new-style\n classes can be found in the documentation accompanying the 2.3\n release at http://www.python.org/download/releases/2.3/mro/.\n\n When a class attribute reference (for class ``C``, say) would yield\n a user-defined function object or an unbound user-defined method\n object whose associated class is either ``C`` or one of its base\n classes, it is transformed into an unbound user-defined method\n object whose ``im_class`` attribute is ``C``. When it would yield a\n class method object, it is transformed into a bound user-defined\n method object whose ``im_self`` attribute is ``C``. When it would\n yield a static method object, it is transformed into the object\n wrapped by the static method object. See section *Implementing\n Descriptors* for another way in which attributes retrieved from a\n class may differ from those actually contained in its ``__dict__``\n (note that only new-style classes supportsupport one method:\n\n slice.indices(self, length)\n\n This method takes a single integer argument *length* and\n computes information about the extended slice that the slice\n object would describe if applied to a sequence of *length*\n items. It returns a tuple of three integers; respectively\n these are the *start* and *stop* indices and the *step* or\n stride length of the slice. Missing or out-of-bounds indices\n are handled in a manner consistent with regular slices.\n\n New in version 2.3.\n\n Static method objects\n Static method objects provide a way of defeating the\n transformation of function objects to method objects described\n above. A static method object is a wrapper around any other\n object, usually a user-defined method object. When a static\n method object is retrieved from a class or a class instance, the\n object actually returned is the wrapped object, which is not\n subject to any further transformation. Static method objects are\n not themselves callable, although the objects they wrap usually\n are. Static method objects are created by the built-in\n ``staticmethod()`` constructor.\n\n Class method objects\n A class method object, like a static method object, is a wrapper\n around another object that alters the way in which that object\n is retrieved from classes and class instances. The behaviour of\n class method objects upon such retrieval is described above,\n under "User-defined methods". Class method objects are created\n by the built-in ``classmethod()`` constructor.\n',
68 'typesfunctions': '\nFunctions\n*********\n\nFunction objects are created by function definitions. The only\noperation on a function object is to call it: ``func(argument-list)``.\n\nThere are really two flavors of function objects: built-in functions\nand user-defined functions. Both support the same operation (to call\nthe function), but the implementation is different, hence the\ndifferent object types.\n\nSee *Function definitions* for more information.\n',
69 'typesmapping': '\nMapping Types --- ``dict``\n**************************\n\nA *mapping* object maps *hashable* values to arbitrary objects.\nMappings are mutable objects. There is currently only one standard\nmapping type, the *dictionary*. (For other containers see the built\nin ``list``, ``set``, and ``tuple`` classes, and the ``collections``\nmodule.)\n\nA dictionary\'s keys are *almost* arbitrary values. Values that are\nnot *hashable*, that is, values containing lists, dictionaries or\nother mutable types (that are compared by value rather than by object\nidentity) may not be used as keys. Numeric types used for keys obey\nthe normal rules for numeric comparison: if two numbers compare equal\n(such as ``1`` and ``1.0``) then they can be used interchangeably to\nindex the same dictionary entry. (Note however, that since computers\nstore floating-point numbers as approximations it is usually unwise to\nuse them as dictionary keys.)\n\nDictionaries can be created by placing a comma-separated list of\n``key: value`` pairs within braces, for example: ``{\'jack\': 4098,\n\'sjoerd\': 4127}`` or ``{4098: \'jack\', 4127: \'sjoerd\'}``, or by the\n``dict`` constructor.\n\nclass class dict(**kwarg)\nclass class dict(mapping, **kwarg)\nclass class dict(iterable, **kwarg)\n\n Return a new dictionary initialized from an optional positional\n argument and a possibly empty set of keyword arguments.\n\n If no positional argument is given, an empty dictionary is created.\n If a positional argument is given and it is a mapping object, a\n dictionary is created with the same key-value pairs as the mapping\n object. Otherwise, the positional argument must be an *iterator*\n object. Each item in the iterable must itself be an iterator with\n exactly two objects. The first object of each item becomes a key\n in the new dictionary, and the second object the corresponding\n value. If a key occurs more than once, the last value for that key\n becomes the corresponding value in the new dictionary.\n\n If keyword arguments are given, the keyword arguments and their\n values are added to the dictionary created from the positional\n argument. If a key being added is already present, the value from\n the keyword argument replaces the value from the positional\n argument.\n\n To illustrate, the following examples all return a dictionary equal\n to ``{"one": 1, "two": 2, "three": 3}``:\n\n >>> a = dict(one=1, two=2, three=3)\n >>> b = {\'one\': 1, \'two\': 2, \'three\': 3}\n >>> c = dict(zip([\'one\', \'two\', \'three\'], [1, 2, 3]))\n >>> d = dict([(\'two\', 2), (\'one\', 1), (\'three\', 3)])\n >>> e = dict({\'three\': 3, \'one\': 1, \'two\': 2})\n >>> a == b == c == d == e\n True\n\n Providing keyword arguments as in the first example only works for\n keys that are valid Python identifiers. Otherwise, any valid keys\n can be used.\n\n New in version 2.2.\n\n Changed in version 2.3: Support for building a dictionary from\n keyword arguments added.\n\n These are the operations that dictionaries support (and therefore,\n custom mapping types should supportsupport membership tests:\n\nlen(dictview)\n\n Return the number of entries in the dictionary.\n\niter(dictview)\n\n Return an iterator over the keys, values or items (represented as\n tuples of ``(key, value)``) in the dictionary.\n\n Keys and values are iterated over in an arbitrary order which is\n non-random, varies across Python implementations, and depends on\n the dictionary\'s history of insertions and deletions. If keys,\n values and items views are iterated over with no intervening\n modifications to the dictionary, the order of items will directly\n correspond. This allows the creation of ``(value, key)`` pairs\n using ``zip()``: ``pairs = zip(d.values(), d.keys())``. Another\n way to create the same list is ``pairs = [(v, k) for (k, v) in\n d.items()]``.\n\n Iterating views while adding or deleting entries in the dictionary\n may raise a ``RuntimeError`` or fail to iterate over all entries.\n\nx in dictview\n\n Return ``True`` if *x* is in the underlying dictionary\'s keys,\n values or items (in the latter case, *x* should be a ``(key,\n value)`` tuple).\n\nKeys views are set-like since their entries are unique and hashable.\nIf all values are hashable, so that (key, value) pairs are unique and\nhashable, then the items view is also set-like. (Values views are not\ntreated as set-like since the entries are generally not unique.) Then\nthese set operations are available ("other" refers either to another\nview or a set):\n\ndictview & other\n\n Return the intersection of the dictview and the other object as a\n new set.\n\ndictview | other\n\n Return the union of the dictview and the other object as a new set.\n\ndictview - other\n\n Return the difference between the dictview and the other object\n (all elements in *dictview* that aren\'t in *other*) as a new set.\n\ndictview ^ other\n\n Return the symmetric difference (all elements either in *dictview*\n or *other*, but not in both) of the dictview and the other object\n as a new set.\n\nAn example of dictionary view usage:\n\n >>> dishes = {\'eggs\': 2, \'sausage\': 1, \'bacon\': 1, \'spam\': 500}\n >>> keys = dishes.viewkeys()\n >>> values = dishes.viewvalues()\n\n >>> # iteration\n >>> n = 0\n >>> for val in values:\n ... n += val\n >>> print(n)\n 504\n\n >>> # keys and values are iterated over in the same order\n >>> list(keys)\n [\'eggs\', \'bacon\', \'sausage\', \'spam\']\n >>> list(values)\n [2, 1, 1, 500]\n\n >>> # view objects are dynamic and reflect dict changes\n >>> del dishes[\'eggs\']\n >>> del dishes[\'sausage\']\n >>> list(keys)\n [\'spam\', \'bacon\']\n\n >>> # set operations\n >>> keys & {\'eggs\', \'bacon\', \'salad\'}\n {\'bacon\'}\n',
70 'typesmethods': '\nMethods\n*******\n\nMethods are functions that are called using the attribute notation.\nThere are two flavors: built-in methods (such as ``append()`` on\nlists) and class instance methods. Built-in methods are described\nwith the types that support them.\n\nThe implementation adds two special read-only attributes to class\ninstance methods: ``m.im_self`` is the object on which the method\noperates, and ``m.im_func`` is the function implementing the method.\nCalling ``m(arg-1, arg-2, ..., arg-n)`` is completely equivalent to\ncalling ``m.im_func(m.im_self, arg-1, arg-2, ..., arg-n)``.\n\nClass instance methods are either *bound* or *unbound*, referring to\nwhether the method was accessed through an instance or a class,\nrespectively. When a method is unbound, its ``im_self`` attribute\nwill be ``None`` and if called, an explicit ``self`` object must be\npassed as the first argument. In this case, ``self`` must be an\ninstance of the unbound method\'s class (or a subclass of that class),\notherwise a ``TypeError`` is raised.\n\nLike function objects, methods objects support getting arbitrary\nattributes. However, since method attributes are actually stored on\nthe underlying function object (``meth.im_func``), setting method\nattributes on either bound or unbound methods is disallowed.\nAttempting to set an attribute on a method results in an\n``AttributeError`` being raised. In order to set a method attribute,\nyou need to explicitly set it on the underlying function object:\n\n >>> class C:\n ... def method(self):\n ... pass\n ...\n >>> c = C()\n >>> c.method.whoami = \'my name is method\' # can\'t set on the method\n Traceback (most recent call last):\n File "<stdin>", line 1, in <module>\n AttributeError: \'instancemethod\' object has no attribute \'whoami\'\n >>> c.method.im_func.whoami = \'my name is method\'\n >>> c.method.whoami\n \'my name is method\'\n\nSee *The standard type hierarchy* for more information.\n',
72 'typesseq': '\nSequence Types --- ``str``, ``unicode``, ``list``, ``tuple``, ``bytearray``, ``buffer``, ``xrange``\n***************************************************************************************************\n\nThere are seven sequence types: strings, Unicode strings, lists,\ntuples, bytearrays, buffers, and xrange objects.\n\nFor other containers see the built in ``dict`` and ``set`` classes,\nand the ``collections`` module.\n\nString literals are written in single or double quotes: ``\'xyzzy\'``,\n``"frobozz"``. See *String literals* for more about string literals.\nUnicode strings are much like strings, but are specified in the syntax\nusing a preceding ``\'u\'`` character: ``u\'abc\'``, ``u"def"``. In\naddition to the functionality described here, there are also string-\nspecific methods described in the *String Methods* section. Lists are\nconstructed with square brackets, separating items with commas: ``[a,\nb, c]``. Tuples are constructed by the comma operator (not within\nsquare brackets), with or without enclosing parentheses, but an empty\ntuple must have the enclosing parentheses, such as ``a, b, c`` or\n``()``. A single item tuple must have a trailing comma, such as\n``(d,)``.\n\nBytearray objects are created with the built-in function\n``bytearray()``.\n\nBuffer objects are not directly supported by Python syntax, but can be\ncreated by calling the built-in function ``buffer()``. They don\'t\nsupport concatenation or repetition.\n\nObjects of type xrange are similar to buffers in that there is no\nspecific syntax to create them, but they are created using the\n``xrange()`` function. They don\'t support slicing, concatenation or\nrepetition, and using ``in``, ``not in``, ``min()`` or ``max()`` on\nthem is inefficient.\n\nMost sequence types support the following operations. The ``in`` and\n``not in`` operations have the same priorities as the comparison\noperations. The ``+`` and ``*`` operations have the same priority as\nthe corresponding numeric operations. [3] Additional methods are\nprovided for *Mutable Sequence Types*.\n\nThis table lists the sequence operations sorted in ascending priority\n(operations in the same box have the same priority). In the table,\n*s* and *t* are sequences of the same type; *n*, *i* and *j* are\nintegers:\n\n+--------------------+----------------------------------+------------+\n| Operation | Result | Notes |\n+====================+==================================+============+\n| ``x in s`` | ``True`` if an item of *s* is | (1) |\n| | equal to *x*, else ``False`` | |\n+--------------------+----------------------------------+------------+\n| ``x not in s`` | ``False`` if an item of *s* is | (1) |\n| | equal to *x*, else ``True`` | |\n+--------------------+----------------------------------+------------+\n| ``s + t`` | the concatenation of *s* and *t* | (6) |\n+--------------------+----------------------------------+------------+\n| ``s * n, n * s`` | *n* shallow copies of *s* | (2) |\n| | concatenated | |\n+--------------------+----------------------------------+------------+\n| ``s[i]`` | *i*th item of *s*, origin 0 | (3) |\n+--------------------+----------------------------------+------------+\n| ``s[i:j]`` | slice of *s* from *i* to *j* | (3)(4) |\n+--------------------+----------------------------------+------------+\n| ``s[i:j:k]`` | slice of *s* from *i* to *j* | (3)(5) |\n| | with step *k* | |\n+--------------------+----------------------------------+------------+\n| ``len(s)`` | length of *s* | |\n+--------------------+----------------------------------+------------+\n| ``min(s)`` | smallest item of *s* | |\n+--------------------+----------------------------------+------------+\n| ``max(s)`` | largest item of *s* | |\n+--------------------+----------------------------------+------------+\n| ``s.index(i)`` | index of the first occurence of | |\n| | *i* in *s* | |\n+--------------------+----------------------------------+------------+\n| ``s.count(i)`` | total number of occurences of | |\n| | *i* in *s* | |\n+--------------------+----------------------------------+------------+\n\nSequence types also supportsupport. Some of them are also available on\n``bytearray`` objects.\n\nIn addition, Python\'s strings support the sequence type methods\ndescribed in the *Sequence Types --- str, unicode, list, tuple,\nbytearray, buffer, xrange* section. To output formatted strings use\ntemplate strings or the ``%`` operator described in the *String\nFormatting Operations* section. Also, see the ``re`` module for string\nfunctions based on regular expressions.\n\nstr.capitalize()\n\n Return a copy of the string with its first character capitalized\n and the rest lowercased.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.center(width[, fillchar])\n\n Return centered in a string of length *width*. Padding is done\n using the specified *fillchar* (default is a space).\n\n Changed in version 2.4: Support for the *fillchar* argument.\n\nstr.count(sub[, start[, end]])\n\n Return the number of non-overlapping occurrences of substring *sub*\n in the range [*start*, *end*]. Optional arguments *start* and\n *end* are interpreted as in slice notation.\n\nstr.decode([encoding[, errors]])\n\n Decodes the string using the codec registered for *encoding*.\n *encoding* defaults to the default string encoding. *errors* may\n be given to set a different error handling scheme. The default is\n ``\'strict\'``, meaning that encoding errors raise ``UnicodeError``.\n Other possible values are ``\'ignore\'``, ``\'replace\'`` and any other\n name registered via ``codecs.register_error()``, see section *Codec\n Base Classes*.\n\n New in version 2.2.\n\n Changed in version 2.3: Support for other error handling schemes\n added.\n\n Changed in version 2.7: Support for keyword arguments added.\n\nstr.encode([encoding[, errors]])\n\n Return an encoded version of the string. Default encoding is the\n current default string encoding. *errors* may be given to set a\n different error handling scheme. The default for *errors* is\n ``\'strict\'``, meaning that encoding errors raise a\n ``UnicodeError``. Other possible values are ``\'ignore\'``,\n ``\'replace\'``, ``\'xmlcharrefreplace\'``, ``\'backslashreplace\'`` and\n any other name registered via ``codecs.register_error()``, see\n section *Codec Base Classes*. For a list of possible encodings, see\n section *Standard Encodings*.\n\n New in version 2.0.\n\n Changed in version 2.3: Support for ``\'xmlcharrefreplace\'`` and\n ``\'backslashreplace\'`` and other error handling schemes added.\n\n Changed in version 2.7: Support for keyword arguments added.\n\nstr.endswith(suffix[, start[, end]])\n\n Return ``True`` if the string ends with the specified *suffix*,\n otherwise return ``False``. *suffix* can also be a tuple of\n suffixes to look for. With optional *start*, test beginning at\n that position. With optional *end*, stop comparing at that\n position.\n\n Changed in version 2.5: Accept tuples as *suffix*.\n\nstr.expandtabs([tabsize])\n\n Return a copy of the string where all tab characters are replaced\n by one or more spaces, depending on the current column and the\n given tab size. Tab positions occur every *tabsize* characters\n (default is 8, giving tab positions at columns 0, 8, 16 and so on).\n To expand the string, the current column is set to zero and the\n string is examined character by character. If the character is a\n tab (``\\t``), one or more space characters are inserted in the\n result until the current column is equal to the next tab position.\n (The tab character itself is not copied.) If the character is a\n newline (``\\n``) or return (``\\r``), it is copied and the current\n column is reset to zero. Any other character is copied unchanged\n and the current column is incremented by one regardless of how the\n character is represented when printed.\n\n >>> \'01\\t012\\t0123\\t01234\'.expandtabs()\n \'01 012 0123 01234\'\n >>> \'01\\t012\\t0123\\t01234\'.expandtabs(4)\n \'01 012 0123 01234\'\n\nstr.find(sub[, start[, end]])\n\n Return the lowest index in the string where substring *sub* is\n found, such that *sub* is contained in the slice ``s[start:end]``.\n Optional arguments *start* and *end* are interpreted as in slice\n notation. Return ``-1`` if *sub* is not found.\n\n Note: The ``find()`` method should be used only if you need to know the\n position of *sub*. To check if *sub* is a substring or not, use\n the ``in`` operator:\n\n >>> \'Py\' in \'Python\'\n True\n\nstr.format(*args, **kwargs)\n\n Perform a string formatting operation. The string on which this\n method is called can contain literal text or replacement fields\n delimited by braces ``{}``. Each replacement field contains either\n the numeric index of a positional argument, or the name of a\n keyword argument. Returns a copy of the string where each\n replacement field is replaced with the string value of the\n corresponding argument.\n\n >>> "The sum of 1 + 2 is {0}".format(1+2)\n \'The sum of 1 + 2 is 3\'\n\n See *Format String Syntax* for a description of the various\n formatting options that can be specified in format strings.\n\n This method of string formatting is the new standard in Python 3,\n and should be preferred to the ``%`` formatting described in\n *String Formatting Operations* in new code.\n\n New in version 2.6.\n\nstr.index(sub[, start[, end]])\n\n Like ``find()``, but raise ``ValueError`` when the substring is not\n found.\n\nstr.isalnum()\n\n Return true if all characters in the string are alphanumeric and\n there is at least one character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.isalpha()\n\n Return true if all characters in the string are alphabetic and\n there is at least one character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.isdigit()\n\n Return true if all characters in the string are digits and there is\n at least one character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.islower()\n\n Return true if all cased characters [4] in the string are lowercase\n and there is at least one cased character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.isspace()\n\n Return true if there are only whitespace characters in the string\n and there is at least one character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.istitle()\n\n Return true if the string is a titlecased string and there is at\n least one character, for example uppercase characters may only\n follow uncased characters and lowercase characters only cased ones.\n Return false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.isupper()\n\n Return true if all cased characters [4] in the string are uppercase\n and there is at least one cased character, false otherwise.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.join(iterable)\n\n Return a string which is the concatenation of the strings in the\n *iterable* *iterable*. The separator between elements is the\n string providing this method.\n\nstr.ljust(width[, fillchar])\n\n Return the string left justified in a string of length *width*.\n Padding is done using the specified *fillchar* (default is a\n space). The original string is returned if *width* is less than or\n equal to ``len(s)``.\n\n Changed in version 2.4: Support for the *fillchar* argument.\n\nstr.lower()\n\n Return a copy of the string with all the cased characters [4]\n converted to lowercase.\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.lstrip([chars])\n\n Return a copy of the string with leading characters removed. The\n *chars* argument is a string specifying the set of characters to be\n removed. If omitted or ``None``, the *chars* argument defaults to\n removing whitespace. The *chars* argument is not a prefix; rather,\n all combinations of its values are stripped:\n\n >>> \' spacious \'.lstrip()\n \'spacious \'\n >>> \'www.example.com\'.lstrip(\'cmowz.\')\n \'example.com\'\n\n Changed in version 2.2.2: Support for the *chars* argument.\n\nstr.partition(sep)\n\n Split the string at the first occurrence of *sep*, and return a\n 3-tuple containing the part before the separator, the separator\n itself, and the part after the separator. If the separator is not\n found, return a 3-tuple containing the string itself, followed by\n two empty strings.\n\n New in version 2.5.\n\nstr.replace(old, new[, count])\n\n Return a copy of the string with all occurrences of substring *old*\n replaced by *new*. If the optional argument *count* is given, only\n the first *count* occurrences are replaced.\n\nstr.rfind(sub[, start[, end]])\n\n Return the highest index in the string where substring *sub* is\n found, such that *sub* is contained within ``s[start:end]``.\n Optional arguments *start* and *end* are interpreted as in slice\n notation. Return ``-1`` on failure.\n\nstr.rindex(sub[, start[, end]])\n\n Like ``rfind()`` but raises ``ValueError`` when the substring *sub*\n is not found.\n\nstr.rjust(width[, fillchar])\n\n Return the string right justified in a string of length *width*.\n Padding is done using the specified *fillchar* (default is a\n space). The original string is returned if *width* is less than or\n equal to ``len(s)``.\n\n Changed in version 2.4: Support for the *fillchar* argument.\n\nstr.rpartition(sep)\n\n Split the string at the last occurrence of *sep*, and return a\n 3-tuple containing the part before the separator, the separator\n itself, and the part after the separator. If the separator is not\n found, return a 3-tuple containing two empty strings, followed by\n the string itself.\n\n New in version 2.5.\n\nstr.rsplit([sep[, maxsplit]])\n\n Return a list of the words in the string, using *sep* as the\n delimiter string. If *maxsplit* is given, at most *maxsplit* splits\n are done, the *rightmost* ones. If *sep* is not specified or\n ``None``, any whitespace string is a separator. Except for\n splitting from the right, ``rsplit()`` behaves like ``split()``\n which is described in detail below.\n\n New in version 2.4.\n\nstr.rstrip([chars])\n\n Return a copy of the string with trailing characters removed. The\n *chars* argument is a string specifying the set of characters to be\n removed. If omitted or ``None``, the *chars* argument defaults to\n removing whitespace. The *chars* argument is not a suffix; rather,\n all combinations of its values are stripped:\n\n >>> \' spacious \'.rstrip()\n \' spacious\'\n >>> \'mississippi\'.rstrip(\'ipz\')\n \'mississ\'\n\n Changed in version 2.2.2: Support for the *chars* argument.\n\nstr.split([sep[, maxsplit]])\n\n Return a list of the words in the string, using *sep* as the\n delimiter string. If *maxsplit* is given, at most *maxsplit*\n splits are done (thus, the list will have at most ``maxsplit+1``\n elements). If *maxsplit* is not specified or ``-1``, then there is\n no limit on the number of splits (all possible splits are made).\n\n If *sep* is given, consecutive delimiters are not grouped together\n and are deemed to delimit empty strings (for example,\n ``\'1,,2\'.split(\',\')`` returns ``[\'1\', \'\', \'2\']``). The *sep*\n argument may consist of multiple characters (for example,\n ``\'1<>2<>3\'.split(\'<>\')`` returns ``[\'1\', \'2\', \'3\']``). Splitting\n an empty string with a specified separator returns ``[\'\']``.\n\n If *sep* is not specified or is ``None``, a different splitting\n algorithm is applied: runs of consecutive whitespace are regarded\n as a single separator, and the result will contain no empty strings\n at the start or end if the string has leading or trailing\n whitespace. Consequently, splitting an empty string or a string\n consisting of just whitespace with a ``None`` separator returns\n ``[]``.\n\n For example, ``\' 1 2 3 \'.split()`` returns ``[\'1\', \'2\', \'3\']``,\n and ``\' 1 2 3 \'.split(None, 1)`` returns ``[\'1\', \'2 3 \']``.\n\nstr.splitlines([keepends])\n\n Return a list of the lines in the string, breaking at line\n boundaries. This method uses the *universal newlines* approach to\n splitting lines. Line breaks are not included in the resulting list\n unless *keepends* is given and true.\n\n For example, ``\'ab c\\n\\nde fg\\rkl\\r\\n\'.splitlines()`` returns\n ``[\'ab c\', \'\', \'de fg\', \'kl\']``, while the same call with\n ``splitlines(True)`` returns ``[\'ab c\\n\', \'\\n\', \'de fg\\r\',\n \'kl\\r\\n\']``.\n\n Unlike ``split()`` when a delimiter string *sep* is given, this\n method returns an empty list for the empty string, and a terminal\n line break does not result in an extra line.\n\nstr.startswith(prefix[, start[, end]])\n\n Return ``True`` if string starts with the *prefix*, otherwise\n return ``False``. *prefix* can also be a tuple of prefixes to look\n for. With optional *start*, test string beginning at that\n position. With optional *end*, stop comparing string at that\n position.\n\n Changed in version 2.5: Accept tuples as *prefix*.\n\nstr.strip([chars])\n\n Return a copy of the string with the leading and trailing\n characters removed. The *chars* argument is a string specifying the\n set of characters to be removed. If omitted or ``None``, the\n *chars* argument defaults to removing whitespace. The *chars*\n argument is not a prefix or suffix; rather, all combinations of its\n values are stripped:\n\n >>> \' spacious \'.strip()\n \'spacious\'\n >>> \'www.example.com\'.strip(\'cmowz.\')\n \'example\'\n\n Changed in version 2.2.2: SupportSupport for a ``None`` *table* argument.\n\n For Unicode objects, the ``translate()`` method does not accept the\n optional *deletechars* argument. Instead, it returns a copy of the\n *s* where all characters have been mapped through the given\n translation table which must be a mapping of Unicode ordinals to\n Unicode ordinals, Unicode strings or ``None``. Unmapped characters\n are left untouched. Characters mapped to ``None`` are deleted.\n Note, a more flexible approach is to create a custom character\n mapping codec using the ``codecs`` module (see ``encodings.cp1251``\n for an example).\n\nstr.upper()\n\n Return a copy of the string with all the cased characters [4]\n converted to uppercase. Note that ``str.upper().isupper()`` might\n be ``False`` if ``s`` contains uncased characters or if the Unicode\n category of the resulting character(s) is not "Lu" (Letter,\n uppercase), but e.g. "Lt" (Letter, titlecase).\n\n For 8-bit strings, this method is locale-dependent.\n\nstr.zfill(width)\n\n Return the numeric string left filled with zeros in a string of\n length *width*. A sign prefix is handled correctly. The original\n string is returned if *width* is less than or equal to ``len(s)``.\n\n New in version 2.2.2.\n\nThe following methods are present only on unicode objects:\n\nunicode.isnumeric()\n\n Return ``True`` if there are only numeric characters in S,\n ``False`` otherwise. Numeric characters include digit characters,\n and all characters that have the Unicode numeric value property,\n e.g. U+2155, VULGAR FRACTION ONE FIFTH.\n\nunicode.isdecimal()\n\n Return ``True`` if there are only decimal characters in S,\n ``False`` otherwise. Decimal characters include digit characters,\n and all characters that can be used to form decimal-radix numbers,\n e.g. U+0660, ARABIC-INDIC DIGIT ZERO.\n\n\nString Formatting Operations\n============================\n\nString and Unicode objects have one unique built-in operation: the\n``%`` operator (modulo). This is also known as the string\n*formatting* or *interpolation* operator. Given ``format % values``\n(where *format* is a string or Unicode object), ``%`` conversion\nspecifications in *format* are replaced with zero or more elements of\n*values*. The effect is similar to the using ``sprintf()`` in the C\nlanguage. If *format* is a Unicode object, or if any of the objects\nbeing converted using the ``%s`` conversion are Unicode objects, the\nresult will also be a Unicode object.\n\nIf *format* requires a single argument, *values* may be a single non-\ntuple object. [5] Otherwise, *values* must be a tuple with exactly\nthe number of items specified by the format string, or a single\nmapping object (for example, a dictionary).\n\nA conversion specifier contains two or more characters and has the\nfollowing components, which must occur in this order:\n\n1. The ``\'%\'`` character, which marks the start of the specifier.\n\n2. Mapping key (optional), consisting of a parenthesised sequence of\n characters (for example, ``(somename)``).\n\n3. Conversion flags (optional), which affect the result of some\n conversion types.\n\n4. Minimum field width (optional). If specified as an ``\'*\'``\n (asterisk), the actual width is read from the next element of the\n tuple in *values*, and the object to convert comes after the\n minimum field width and optional precision.\n\n5. Precision (optional), given as a ``\'.\'`` (dot) followed by the\n precision. If specified as ``\'*\'`` (an asterisk), the actual width\n is read from the next element of the tuple in *values*, and the\n value to convert comes after the precision.\n\n6. Length modifier (optional).\n\n7. Conversion type.\n\nWhen the right argument is a dictionary (or other mapping type), then\nthe formats in the string *must* include a parenthesised mapping key\ninto that dictionary inserted immediately after the ``\'%\'`` character.\nThe mapping key selects the value to be formatted from the mapping.\nFor example:\n\n>>> print \'%(language)s has %(number)03d quote types.\' % \\\n... {"language": "Python", "number": 2}\nPython has 002 quote types.\n\nIn this case no ``*`` specifiers may occur in a format (since they\nrequire a sequential parameter list).\n\nThe conversion flag characters are:\n\n+-----------+-----------------------------------------------------------------------+\n| Flag | Meaning |\n+===========+=======================================================================+\n| ``\'#\'`` | The value conversion will use the "alternate form" (where defined |\n| | below). |\n+-----------+-----------------------------------------------------------------------+\n| ``\'0\'`` | The conversion will be zero padded for numeric values. |\n+-----------+-----------------------------------------------------------------------+\n| ``\'-\'`` | The converted value is left adjusted (overrides the ``\'0\'`` |\n| | conversion if both are given). |\n+-----------+-----------------------------------------------------------------------+\n| ``\' \'`` | (a space) A blank should be left before a positive number (or empty |\n| | string) produced by a signed conversion. |\n+-----------+-----------------------------------------------------------------------+\n| ``\'+\'`` | A sign character (``\'+\'`` or ``\'-\'``) will precede the conversion |\n| | (overrides a "space" flag). |\n+-----------+-----------------------------------------------------------------------+\n\nA length modifier (``h``, ``l``, or ``L``) may be present, but is\nignored as it is not necessary for Python -- so e.g. ``%ld`` is\nidentical to ``%d``.\n\nThe conversion types are:\n\n+--------------+-------------------------------------------------------+---------+\n| Conversion | Meaning | Notes |\n+==============+=======================================================+=========+\n| ``\'d\'`` | Signed integer decimal. | |\n+--------------+-------------------------------------------------------+---------+\n| ``\'i\'`` | Signed integer decimal. | |\n+--------------+-------------------------------------------------------+---------+\n| ``\'o\'`` | Signed octal value. | (1) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'u\'`` | Obsolete type -- it is identical to ``\'d\'``. | (7) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'x\'`` | Signed hexadecimal (lowercase). | (2) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'X\'`` | Signed hexadecimal (uppercase). | (2) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'e\'`` | Floating point exponential format (lowercase). | (3) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'E\'`` | Floating point exponential format (uppercase). | (3) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'f\'`` | Floating point decimal format. | (3) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'F\'`` | Floating point decimal format. | (3) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'g\'`` | Floating point format. Uses lowercase exponential | (4) |\n| | format if exponent is less than -4 or not less than | |\n| | precision, decimal format otherwise. | |\n+--------------+-------------------------------------------------------+---------+\n| ``\'G\'`` | Floating point format. Uses uppercase exponential | (4) |\n| | format if exponent is less than -4 or not less than | |\n| | precision, decimal format otherwise. | |\n+--------------+-------------------------------------------------------+---------+\n| ``\'c\'`` | Single character (accepts integer or single character | |\n| | string). | |\n+--------------+-------------------------------------------------------+---------+\n| ``\'r\'`` | String (converts any Python object using *repr()*). | (5) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'s\'`` | String (converts any Python object using ``str()``). | (6) |\n+--------------+-------------------------------------------------------+---------+\n| ``\'%\'`` | No argument is converted, results in a ``\'%\'`` | |\n| | character in the result. | |\n+--------------+-------------------------------------------------------+---------+\n\nNotes:\n\n1. The alternate form causes a leading zero (``\'0\'``) to be inserted\n between left-hand padding and the formatting of the number if the\n leading character of the result is not already a zero.\n\n2. The alternate form causes a leading ``\'0x\'`` or ``\'0X\'`` (depending\n on whether the ``\'x\'`` or ``\'X\'`` format was used) to be inserted\n between left-hand padding and the formatting of the number if the\n leading character of the result is not already a zero.\n\n3. The alternate form causes the result to always contain a decimal\n point, even if no digits follow it.\n\n The precision determines the number of digits after the decimal\n point and defaults to 6.\n\n4. The alternate form causes the result to always contain a decimal\n point, and trailing zeroes are not removed as they would otherwise\n be.\n\n The precision determines the number of significant digits before\n and after the decimal point and defaults to 6.\n\n5. The ``%r`` conversion was added in Python 2.0.\n\n The precision determines the maximal number of characters used.\n\n6. If the object or format provided is a ``unicode`` string, the\n resulting string will also be ``unicode``.\n\n The precision determines the maximal number of characters used.\n\n7. See **PEP 237**.\n\nSince Python strings have an explicit length, ``%s`` conversions do\nnot assume that ``\'\\0\'`` is the end of the string.\n\nChanged in version 2.7: ``%f`` conversions for numbers whose absolute\nvalue is over 1e50 are no longer replaced by ``%g`` conversions.\n\nAdditional string operations are defined in standard modules\n``string`` and ``re``.\n\n\nXRange Type\n===========\n\nThe ``xrange`` type is an immutable sequence which is commonly used\nfor looping. The advantage of the ``xrange`` type is that an\n``xrange`` object will always take the same amount of memory, no\nmatter the size of the range it represents. There are no consistent\nperformance advantages.\n\nXRange objects have very little behavior: they only support indexing,\niteration, and the ``len()`` function.\n\n\nMutable Sequence Types\n======================\n\nList and ``bytearray`` objects support additional operations that\nallow in-place modification of the object. Other mutable sequence\ntypes (when added to the language) should also supportSupport for ``None`` as an equivalent to\n omitting *cmp* was added.\n\n Changed in version 2.4: Support for *key* and *reverse* was added.\n\n9. Starting with Python 2.3, the ``sort()`` method is guaranteed to be\n stable. A sort is stable if it guarantees not to change the\n relative order of elements that compare equal --- this is helpful\n for sorting in multiple passes (for example, sort by department,\n then by salary grade).\n\n10. **CPython implementation detail:** While a list is being sorted,\n the effect of attempting to mutate, or even inspect, the list is\n undefined. The C implementation of Python 2.3 and newer makes the\n list appear empty for the duration, and raises ``ValueError`` if\n it can detect that the list has been mutated during a sort.\n',
73 'typesseq-mutable': "\nMutable Sequence Types\n**********************\n\nList and ``bytearray`` objects support additional operations that\nallow in-place modification of the object. Other mutable sequence\ntypes (when added to the language) should also support these\noperations. Strings and tuples are immutable sequence types: such\nobjects cannot be modified once created. The following operations are\ndefined on mutable sequence types (where *x* is an arbitrary object):\n\n+--------------------------------+----------------------------------+-----------------------+\n| Operation | Result | Notes |\n+================================+==================================+=======================+\n| ``s[i] = x`` | item *i* of *s* is replaced by | |\n| | *x* | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s[i:j] = t`` | slice of *s* from *i* to *j* is | |\n| | replaced by the contents of the | |\n| | iterable *t* | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``del s[i:j]`` | same as ``s[i:j] = []`` | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s[i:j:k] = t`` | the elements of ``s[i:j:k]`` are | (1) |\n| | replaced by those of *t* | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``del s[i:j:k]`` | removes the elements of | |\n| | ``s[i:j:k]`` from the list | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.append(x)`` | same as ``s[len(s):len(s)] = | (2) |\n| | [x]`` | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.extend(x)`` | same as ``s[len(s):len(s)] = x`` | (3) |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.count(x)`` | return number of *i*'s for which | |\n| | ``s[i] == x`` | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.index(x[, i[, j]])`` | return smallest *k* such that | (4) |\n| | ``s[k] == x`` and ``i <= k < j`` | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.insert(i, x)`` | same as ``s[i:i] = [x]`` | (5) |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.pop([i])`` | same as ``x = s[i]; del s[i]; | (6) |\n| | return x`` | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.remove(x)`` | same as ``del s[s.index(x)]`` | (4) |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.reverse()`` | reverses the items of *s* in | (7) |\n| | place | |\n+--------------------------------+----------------------------------+-----------------------+\n| ``s.sort([cmp[, key[, | sort the items of *s* in place | (7)(8)(9)(10) |\n| reverse]]])`` | | |\n+--------------------------------+----------------------------------+-----------------------+\n\nNotes:\n\n1. *t* must have the same length as the slice it is replacing.\n\n2. The C implementation of Python has historically accepted multiple\n parameters and implicitly joined them into a tuple; this no longer\n works in Python 2.0. Use of this misfeature has been deprecated\n since Python 1.4.\n\n3. *x* can be any iterable object.\n\n4. Raises ``ValueError`` when *x* is not found in *s*. When a negative\n index is passed as the second or third parameter to the ``index()``\n method, the list length is added, as for slice indices. If it is\n still negative, it is truncated to zero, as for slice indices.\n\n Changed in version 2.3: Previously, ``index()`` didn't have\n arguments for specifying start and stop positions.\n\n5. When a negative index is passed as the first parameter to the\n ``insert()`` method, the list length is added, as for slice\n indices. If it is still negative, it is truncated to zero, as for\n slice indices.\n\n Changed in version 2.3: Previously, all negative indices were\n truncated to zero.\n\n6. The ``pop()`` method is only supported by the list and array types.\n The optional argument *i* defaults to ``-1``, so that by default\n the last item is removed and returned.\n\n7. The ``sort()`` and ``reverse()`` methods modify the list in place\n for economy of space when sorting or reversing a large list. To\n remind you that they operate by side effect, they don't return the\n sorted or reversed list.\n\n8. The ``sort()`` method takes optional arguments for controlling the\n comparisons.\n\n *cmp* specifies a custom comparison function of two arguments (list\n items) which should return a negative, zero or positive number\n depending on whether the first argument is considered smaller than,\n equal to, or larger than the second argument: ``cmp=lambda x,y:\n cmp(x.lower(), y.lower())``. The default value is ``None``.\n\n *key* specifies a function of one argument that is used to extract\n a comparison key from each list element: ``key=str.lower``. The\n default value is ``None``.\n\n *reverse* is a boolean value. If set to ``True``, then the list\n elements are sorted as if each comparison were reversed.\n\n In general, the *key* and *reverse* conversion processes are much\n faster than specifying an equivalent *cmp* function. This is\n because *cmp* is called multiple times for each list element while\n *key* and *reverse* touch each element only once. Use\n ``functools.cmp_to_key()`` to convert an old-style *cmp* function\n to a *key* function.\n\n Changed in version 2.3: Support for ``None`` as an equivalent to\n omitting *cmp* was added.\n\n Changed in version 2.4: Support for *key* and *reverse* was added.\n\n9. Starting with Python 2.3, the ``sort()`` method is guaranteed to be\n stable. A sort is stable if it guarantees not to change the\n relative order of elements that compare equal --- this is helpful\n for sorting in multiple passes (for example, sort by department,\n then by salary grade).\n\n10. **CPython implementation detail:** While a list is being sorted,\n the effect of attempting to mutate, or even inspect, the list is\n undefined. The C implementation of Python 2.3 and newer makes the\n list appear empty for the duration, and raises ``ValueError`` if\n it can detect that the list has been mutated during a sort.\n",
76 'with': '\nThe ``with`` statement\n**********************\n\nNew in version 2.5.\n\nThe ``with`` statement is used to wrap the execution of a block with\nmethods defined by a context manager (see section *With Statement\nContext Managers*). This allows common\n``try``...``except``...``finally`` usage patterns to be encapsulated\nfor convenient reuse.\n\n with_stmt ::= "with" with_item ("," with_item)* ":" suite\n with_item ::= expression ["as" target]\n\nThe execution of the ``with`` statement with one "item" proceeds as\nfollows:\n\n1. The context expression (the expression given in the ``with_item``)\n is evaluated to obtain a context manager.\n\n2. The context manager\'s ``__exit__()`` is loaded for later use.\n\n3. The context manager\'s ``__enter__()`` method is invoked.\n\n4. If a target was included in the ``with`` statement, the return\n value from ``__enter__()`` is assigned to it.\n\n Note: The ``with`` statement guarantees that if the ``__enter__()``\n method returns without an error, then ``__exit__()`` will always\n be called. Thus, if an error occurs during the assignment to the\n target list, it will be treated the same as an error occurring\n within the suite would be. See step 6 below.\n\n5. The suite is executed.\n\n6. The context manager\'s ``__exit__()`` method is invoked. If an\n exception caused the suite to be exited, its type, value, and\n traceback are passed as arguments to ``__exit__()``. Otherwise,\n three ``None`` arguments are supplied.\n\n If the suite was exited due to an exception, and the return value\n from the ``__exit__()`` method was false, the exception is\n reraised. If the return value was true, the exception is\n suppressed, and execution continues with the statement following\n the ``with`` statement.\n\n If the suite was exited for any reason other than an exception, the\n return value from ``__exit__()`` is ignored, and execution proceeds\n at the normal location for the kind of exit that was taken.\n\nWith more than one item, the context managers are processed as if\nmultiple ``with`` statements were nested:\n\n with A() as a, B() as b:\n suite\n\nis equivalent to\n\n with A() as a:\n with B() as b:\n suite\n\nNote: In Python 2.5, the ``with`` statement is only allowed when the\n ``with_statement`` feature has been enabled. It is always enabled\n in Python 2.6.\n\nChanged in version 2.7: Support for multiple context expressions.\n\nSee also:\n\n **PEP 0343** - The "with" statement\n The specification, background, and examples for the Python\n ``with`` statement.\n',
