1 /****************************************************************************** 2 * 3 * Copyright (C) 2003-2012 Broadcom Corporation 4 * 5 * Licensed under the Apache License, Version 2.0 (the "License"); 6 * you may not use this file except in compliance with the License. 7 * You may obtain a copy of the License at: 8 * 9 * http://www.apache.org/licenses/LICENSE-2.0 10 * 11 * Unless required by applicable law or agreed to in writing, software 12 * distributed under the License is distributed on an "AS IS" BASIS, 13 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 14 * See the License for the specific language governing permissions and 15 * limitations under the License. 16 * 17 ******************************************************************************/ 18 19 /****************************************************************************** 20 * 21 * This is the public interface file for BTA, Broadcom's Bluetooth 22 * application layer for mobile phones. 23 * 24 ******************************************************************************/ 25 #ifndef BTA_API_H 26 #define BTA_API_H 27 28 #include "data_types.h" 29 #include "bt_target.h" 30 #include "bt_types.h" 31 #include "btm_api.h" 32 #include "uipc_msg.h" 33 34 #if BLE_INCLUDED == TRUE 35 #include "btm_ble_api.h" 36 #endif 37 38 /***************************************************************************** 39 ** Constants and data types 40 *****************************************************************************/ 41 42 /* Status Return Value */ 43 #define BTA_SUCCESS 0 /* Successful operation. */ 44 #define BTA_FAILURE 1 /* Generic failure. */ 45 #define BTA_PENDING 2 /* API cannot be completed right now */ 46 #define BTA_BUSY 3 47 #define BTA_NO_RESOURCES 4 48 #define BTA_WRONG_MODE 5 49 50 typedef UINT8 tBTA_STATUS; 51 52 /* 53 * Service ID 54 * 55 * NOTES: When you add a new Service ID for BTA AND require to change the value of BTA_MAX_SERVICE_ID, 56 * make sure that the correct security ID of the new service from Security service definitions (btm_api.h) 57 * should be added to bta_service_id_to_btm_srv_id_lkup_tbl table in bta_dm_act.c. 58 */ 59 60 #define BTA_RES_SERVICE_ID 0 /* Reserved */ 61 #define BTA_SPP_SERVICE_ID 1 /* Serial port profile. */ 62 #define BTA_DUN_SERVICE_ID 2 /* Dial-up networking profile. */ 63 #define BTA_A2DP_SOURCE_SERVICE_ID 3 /* A2DP Source profile. */ 64 #define BTA_LAP_SERVICE_ID 4 /* LAN access profile. */ 65 #define BTA_HSP_SERVICE_ID 5 /* Headset profile. */ 66 #define BTA_HFP_SERVICE_ID 6 /* Hands-free profile. */ 67 #define BTA_OPP_SERVICE_ID 7 /* Object push */ 68 #define BTA_FTP_SERVICE_ID 8 /* File transfer */ 69 #define BTA_CTP_SERVICE_ID 9 /* Cordless Terminal */ 70 #define BTA_ICP_SERVICE_ID 10 /* Intercom Terminal */ 71 #define BTA_SYNC_SERVICE_ID 11 /* Synchronization */ 72 #define BTA_BPP_SERVICE_ID 12 /* Basic printing profile */ 73 #define BTA_BIP_SERVICE_ID 13 /* Basic Imaging profile */ 74 #define BTA_PANU_SERVICE_ID 14 /* PAN User */ 75 #define BTA_NAP_SERVICE_ID 15 /* PAN Network access point */ 76 #define BTA_GN_SERVICE_ID 16 /* PAN Group Ad-hoc networks */ 77 #define BTA_SAP_SERVICE_ID 17 /* SIM Access profile */ 78 #define BTA_A2DP_SERVICE_ID 18 /* A2DP Sink */ 79 #define BTA_AVRCP_SERVICE_ID 19 /* A/V remote control */ 80 #define BTA_HID_SERVICE_ID 20 /* HID */ 81 #define BTA_VDP_SERVICE_ID 21 /* Video distribution */ 82 #define BTA_PBAP_SERVICE_ID 22 /* PhoneBook Access Server*/ 83 #define BTA_HSP_HS_SERVICE_ID 23 /* HFP HS role */ 84 #define BTA_HFP_HS_SERVICE_ID 24 /* HSP HS role */ 85 #define BTA_MAP_SERVICE_ID 25 /* Message Access Profile */ 86 #define BTA_MN_SERVICE_ID 26 /* Message Notification Service */ 87 #define BTA_HDP_SERVICE_ID 27 /* Health Device Profile */ 88 #define BTA_PCE_SERVICE_ID 28 /* PhoneBook Access Client*/ 89 90 #if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE 91 /* BLE profile service ID */ 92 #define BTA_BLE_SERVICE_ID 29 /* GATT profile */ 93 94 // btla-specific ++ 95 #define BTA_USER_SERVICE_ID 30 /* User requested UUID */ 96 97 #define BTA_MAX_SERVICE_ID 31 98 // btla-specific -- 99 #else 100 #define BTA_USER_SERVICE_ID 29 /* User requested UUID */ 101 #define BTA_MAX_SERVICE_ID 30 102 #endif 103 /* service IDs (BTM_SEC_SERVICE_FIRST_EMPTY + 1) to (BTM_SEC_MAX_SERVICES - 1) 104 * are used by BTA JV */ 105 #define BTA_FIRST_JV_SERVICE_ID (BTM_SEC_SERVICE_FIRST_EMPTY + 1) 106 #define BTA_LAST_JV_SERVICE_ID (BTM_SEC_MAX_SERVICES - 1) 107 108 typedef UINT8 tBTA_SERVICE_ID; 109 110 /* Service ID Mask */ 111 #define BTA_RES_SERVICE_MASK 0x00000001 /* Reserved */ 112 #define BTA_SPP_SERVICE_MASK 0x00000002 /* Serial port profile. */ 113 #define BTA_DUN_SERVICE_MASK 0x00000004 /* Dial-up networking profile. */ 114 #define BTA_FAX_SERVICE_MASK 0x00000008 /* Fax profile. */ 115 #define BTA_LAP_SERVICE_MASK 0x00000010 /* LAN access profile. */ 116 #define BTA_HSP_SERVICE_MASK 0x00000020 /* HSP AG role. */ 117 #define BTA_HFP_SERVICE_MASK 0x00000040 /* HFP AG role */ 118 #define BTA_OPP_SERVICE_MASK 0x00000080 /* Object push */ 119 #define BTA_FTP_SERVICE_MASK 0x00000100 /* File transfer */ 120 #define BTA_CTP_SERVICE_MASK 0x00000200 /* Cordless Terminal */ 121 #define BTA_ICP_SERVICE_MASK 0x00000400 /* Intercom Terminal */ 122 #define BTA_SYNC_SERVICE_MASK 0x00000800 /* Synchronization */ 123 #define BTA_BPP_SERVICE_MASK 0x00001000 /* Print server */ 124 #define BTA_BIP_SERVICE_MASK 0x00002000 /* Basic Imaging */ 125 #define BTA_PANU_SERVICE_MASK 0x00004000 /* PAN User */ 126 #define BTA_NAP_SERVICE_MASK 0x00008000 /* PAN Network access point */ 127 #define BTA_GN_SERVICE_MASK 0x00010000 /* PAN Group Ad-hoc networks */ 128 #define BTA_SAP_SERVICE_MASK 0x00020000 /* PAN Group Ad-hoc networks */ 129 #define BTA_A2DP_SERVICE_MASK 0x00040000 /* Advanced audio distribution */ 130 #define BTA_AVRCP_SERVICE_MASK 0x00080000 /* A/V remote control */ 131 #define BTA_HID_SERVICE_MASK 0x00100000 /* HID */ 132 #define BTA_VDP_SERVICE_MASK 0x00200000 /* Video distribution */ 133 #define BTA_PBAP_SERVICE_MASK 0x00400000 /* Phone Book Server */ 134 #define BTA_HSP_HS_SERVICE_MASK 0x00800000 /* HFP HS role */ 135 #define BTA_HFP_HS_SERVICE_MASK 0x01000000 /* HSP HS role */ 136 #define BTA_MAS_SERVICE_MASK 0x02000000 /* Message Access Profile */ 137 #define BTA_MN_SERVICE_MASK 0x04000000 /* Message Notification Profile */ 138 #define BTA_HL_SERVICE_MASK 0x08000000 /* Health Device Profile */ 139 #define BTA_PCE_SERVICE_MASK 0x10000000 /* Phone Book Client */ 140 141 #if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE 142 #define BTA_BLE_SERVICE_MASK 0x20000000 /* GATT based service */ 143 // btla-specific ++ 144 #define BTA_USER_SERVICE_MASK 0x40000000 /* Message Notification Profile */ 145 // btla-specific -- 146 #else 147 // btla-specific ++ 148 #define BTA_USER_SERVICE_MASK 0x20000000 /* Message Notification Profile */ 149 // btla-specific -- 150 #endif 151 152 #if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE 153 #define BTA_ALL_SERVICE_MASK 0x3FFFFFFF /* All services supported by BTA. */ 154 #else 155 #define BTA_ALL_SERVICE_MASK 0x1FFFFFFF /* All services supported by BTA. */ 156 #endif 157 158 typedef UINT32 tBTA_SERVICE_MASK; 159 160 /* extended service mask, including mask with one or more GATT UUID */ 161 typedef struct 162 { 163 tBTA_SERVICE_MASK srvc_mask; 164 UINT8 num_uuid; 165 tBT_UUID *p_uuid; 166 }tBTA_SERVICE_MASK_EXT; 167 168 /* Security Setting Mask */ 169 #define BTA_SEC_NONE BTM_SEC_NONE /* No security. */ 170 #define BTA_SEC_AUTHORIZE (BTM_SEC_IN_AUTHORIZE ) /* Authorization required (only needed for out going connection )*/ 171 #define BTA_SEC_AUTHENTICATE (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_OUT_AUTHENTICATE) /* Authentication required. */ 172 #define BTA_SEC_ENCRYPT (BTM_SEC_IN_ENCRYPT | BTM_SEC_OUT_ENCRYPT) /* Encryption required. */ 173 174 typedef UINT8 tBTA_SEC; 175 176 /* Ignore for Discoverable, Connectable, Pairable and Connectable Paired only device modes */ 177 178 #define BTA_DM_IGNORE 0xFF 179 180 #define BTA_ALL_APP_ID 0xFF 181 182 /* Discoverable Modes */ 183 #define BTA_DM_NON_DISC BTM_NON_DISCOVERABLE /* Device is not discoverable. */ 184 #define BTA_DM_GENERAL_DISC BTM_GENERAL_DISCOVERABLE /* General discoverable. */ 185 #define BTA_DM_LIMITED_DISC BTM_LIMITED_DISCOVERABLE /* Limited discoverable. */ 186 #if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 187 #define BTA_DM_BLE_NON_DISCOVERABLE BTM_BLE_NON_DISCOVERABLE /* Device is not LE discoverable */ 188 #define BTA_DM_BLE_GENERAL_DISCOVERABLE BTM_BLE_GENERAL_DISCOVERABLE /* Device is LE General discoverable */ 189 #define BTA_DM_BLE_LIMITED_DISCOVERABLE BTM_BLE_LIMITED_DISCOVERABLE /* Device is LE Limited discoverable */ 190 #endif 191 typedef UINT16 tBTA_DM_DISC; /* this discoverability mode is a bit mask among BR mode and LE mode */ 192 193 /* Connectable Modes */ 194 #define BTA_DM_NON_CONN BTM_NON_CONNECTABLE /* Device is not connectable. */ 195 #define BTA_DM_CONN BTM_CONNECTABLE /* Device is connectable. */ 196 #if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 197 #define BTA_DM_BLE_NON_CONNECTABLE BTM_BLE_NON_CONNECTABLE /* Device is LE non-connectable. */ 198 #define BTA_DM_BLE_CONNECTABLE BTM_BLE_CONNECTABLE /* Device is LE connectable. */ 199 #endif 200 201 // btla-specific ++ 202 typedef UINT16 tBTA_DM_CONN; 203 // btla-specific -- 204 205 /* Pairable Modes */ 206 #define BTA_DM_PAIRABLE 1 207 #define BTA_DM_NON_PAIRABLE 0 208 209 /* Connectable Paired Only Mode */ 210 #define BTA_DM_CONN_ALL 0 211 #define BTA_DM_CONN_PAIRED 1 212 213 /* Inquiry Modes */ 214 #define BTA_DM_INQUIRY_NONE BTM_INQUIRY_NONE /*No BR inquiry. */ 215 #define BTA_DM_GENERAL_INQUIRY BTM_GENERAL_INQUIRY /* Perform general inquiry. */ 216 #define BTA_DM_LIMITED_INQUIRY BTM_LIMITED_INQUIRY /* Perform limited inquiry. */ 217 218 #if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 219 #define BTA_BLE_INQUIRY_NONE BTM_BLE_INQUIRY_NONE 220 #define BTA_BLE_GENERAL_INQUIRY BTM_BLE_GENERAL_INQUIRY /* Perform LE general inquiry. */ 221 #define BTA_BLE_LIMITED_INQUIRY BTM_BLE_LIMITED_INQUIRY /* Perform LE limited inquiry. */ 222 #endif 223 typedef UINT8 tBTA_DM_INQ_MODE; 224 225 /* Inquiry Filter Type */ 226 #define BTA_DM_INQ_CLR BTM_CLR_INQUIRY_FILTER /* Clear inquiry filter. */ 227 #define BTA_DM_INQ_DEV_CLASS BTM_FILTER_COND_DEVICE_CLASS /* Filter on device class. */ 228 #define BTA_DM_INQ_BD_ADDR BTM_FILTER_COND_BD_ADDR /* Filter on a specific BD address. */ 229 230 typedef UINT8 tBTA_DM_INQ_FILT; 231 232 /* Authorize Response */ 233 #define BTA_DM_AUTH_PERM 0 /* Authorized for future connections to the service */ 234 #define BTA_DM_AUTH_TEMP 1 /* Authorized for current connection only */ 235 #define BTA_DM_NOT_AUTH 2 /* Not authorized for the service */ 236 237 typedef UINT8 tBTA_AUTH_RESP; 238 239 /* M/S preferred roles */ 240 #define BTA_ANY_ROLE 0x00 241 #define BTA_MASTER_ROLE_PREF 0x01 242 #define BTA_MASTER_ROLE_ONLY 0x02 243 244 typedef UINT8 tBTA_PREF_ROLES; 245 246 enum 247 { 248 249 BTA_DM_NO_SCATTERNET, /* Device doesn't support scatternet, it might 250 support "role switch during connection" for 251 an incoming connection, when it already has 252 another connection in master role */ 253 BTA_DM_PARTIAL_SCATTERNET, /* Device supports partial scatternet. It can have 254 simulateous connection in Master and Slave roles 255 for short period of time */ 256 BTA_DM_FULL_SCATTERNET /* Device can have simultaneous connection in master 257 and slave roles */ 258 259 }; 260 261 262 /* Inquiry filter device class condition */ 263 typedef struct 264 { 265 DEV_CLASS dev_class; /* device class of interest */ 266 DEV_CLASS dev_class_mask; /* mask to determine the bits of device class of interest */ 267 } tBTA_DM_COD_COND; 268 269 270 /* Inquiry Filter Condition */ 271 typedef union 272 { 273 BD_ADDR bd_addr; /* BD address of device to filter. */ 274 tBTA_DM_COD_COND dev_class_cond; /* Device class filter condition */ 275 } tBTA_DM_INQ_COND; 276 277 /* Inquiry Parameters */ 278 typedef struct 279 { 280 tBTA_DM_INQ_MODE mode; /* Inquiry mode, limited or general. */ 281 UINT8 duration; /* Inquiry duration in 1.28 sec units. */ 282 UINT8 max_resps; /* Maximum inquiry responses. Set to zero for unlimited responses. */ 283 BOOLEAN report_dup; /* report duplicated inquiry response with higher RSSI value */ 284 tBTA_DM_INQ_FILT filter_type; /* Filter condition type. */ 285 tBTA_DM_INQ_COND filter_cond; /* Filter condition data. */ 286 #if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE) 287 UINT8 intl_duration[4];/*duration array storing the interleave scan's time portions*/ 288 #endif 289 } tBTA_DM_INQ; 290 291 typedef struct 292 { 293 UINT8 bta_dm_eir_min_name_len; /* minimum length of local name when it is shortened */ 294 #if (BTA_EIR_CANNED_UUID_LIST == TRUE) 295 UINT8 bta_dm_eir_uuid16_len; /* length of 16-bit UUIDs */ 296 UINT8 *bta_dm_eir_uuid16; /* 16-bit UUIDs */ 297 #else 298 UINT32 uuid_mask[BTM_EIR_SERVICE_ARRAY_SIZE]; /* mask of UUID list in EIR */ 299 #endif 300 INT8 *bta_dm_eir_inq_tx_power; /* Inquiry TX power */ 301 UINT8 bta_dm_eir_flag_len; /* length of flags in bytes */ 302 UINT8 *bta_dm_eir_flags; /* flags for EIR */ 303 UINT8 bta_dm_eir_manufac_spec_len; /* length of manufacturer specific in bytes */ 304 UINT8 *bta_dm_eir_manufac_spec; /* manufacturer specific */ 305 UINT8 bta_dm_eir_additional_len; /* length of additional data in bytes */ 306 UINT8 *bta_dm_eir_additional; /* additional data */ 307 } tBTA_DM_EIR_CONF; 308 309 #if BLE_INCLUDED == TRUE 310 /* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */ 311 #define BTA_BLE_LIMIT_DISC_FLAG BTM_BLE_LIMIT_DISC_FLAG 312 #define BTA_BLE_GEN_DISC_FLAG BTM_BLE_GEN_DISC_FLAG 313 #define BTA_BLE_BREDR_NOT_SPT BTM_BLE_BREDR_NOT_SPT 314 #define BTA_BLE_NON_LIMIT_DISC_FLAG BTM_BLE_NON_LIMIT_DISC_FLAG 315 #define BTA_BLE_ADV_FLAG_MASK BTM_BLE_ADV_FLAG_MASK 316 #define BTA_BLE_LIMIT_DISC_MASK BTM_BLE_LIMIT_DISC_MASK 317 318 /* ADV data bit mask */ 319 #define BTA_BLE_AD_BIT_DEV_NAME BTM_BLE_AD_BIT_DEV_NAME 320 #define BTA_BLE_AD_BIT_FLAGS BTM_BLE_AD_BIT_FLAGS 321 #define BTA_BLE_AD_BIT_MANU BTM_BLE_AD_BIT_MANU 322 #define BTA_BLE_AD_BIT_TX_PWR BTM_BLE_AD_BIT_TX_PWR 323 #define BTA_BLE_AD_BIT_INT_RANGE BTM_BLE_AD_BIT_INT_RANGE 324 #define BTA_BLE_AD_BIT_SERVICE BTM_BLE_AD_BIT_SERVICE 325 #define BTA_BLE_AD_BIT_APPEARANCE BTM_BLE_AD_BIT_APPEARANCE 326 #define BTA_BLE_AD_BIT_PROPRIETARY BTM_BLE_AD_BIT_PROPRIETARY 327 #define BTA_DM_BLE_AD_BIT_SERVICE_SOL BTM_BLE_AD_BIT_SERVICE_SOL 328 #define BTA_DM_BLE_AD_BIT_SERVICE_DATA BTM_BLE_AD_BIT_SERVICE_DATA 329 #define BTA_DM_BLE_AD_BIT_SIGN_DATA BTM_BLE_AD_BIT_SIGN_DATA 330 #define BTA_DM_BLE_AD_BIT_SERVICE_128SOL BTM_BLE_AD_BIT_SERVICE_128SOL 331 #define BTA_DM_BLE_AD_BIT_PUBLIC_ADDR BTM_BLE_AD_BIT_PUBLIC_ADDR 332 #define BTA_DM_BLE_AD_BIT_RANDOM_ADDR BTM_BLE_AD_BIT_RANDOM_ADDR 333 334 typedef UINT16 tBTA_BLE_AD_MASK; 335 336 /* slave preferred connection interval range */ 337 typedef struct 338 { 339 UINT16 low; 340 UINT16 hi; 341 342 }tBTA_BLE_INT_RANGE; 343 344 /* Service tag supported in the device */ 345 typedef struct 346 { 347 UINT8 num_service; 348 BOOLEAN list_cmpl; 349 UINT16 *p_uuid; 350 }tBTA_BLE_SERVICE; 351 352 353 typedef struct 354 { 355 UINT8 len; 356 UINT8 *p_val; 357 }tBTA_BLE_MANU; 358 359 typedef struct 360 { 361 UINT8 adv_type; 362 UINT8 len; 363 UINT8 *p_val; /* number of len byte */ 364 }tBTA_BLE_PROP_ELEM; 365 366 /* vendor proprietary adv type */ 367 typedef struct 368 { 369 UINT8 num_elem; 370 tBTA_BLE_PROP_ELEM *p_elem; 371 }tBTA_BLE_PROPRIETARY; 372 373 typedef struct 374 { 375 tBTA_BLE_MANU manu; /* manufactuer data */ 376 tBTA_BLE_INT_RANGE int_range; /* slave prefered conn interval range */ 377 tBTA_BLE_SERVICE services; /* services */ 378 UINT16 appearance; /* appearance data */ 379 UINT8 flag; 380 tBTA_BLE_PROPRIETARY *p_proprietary; 381 382 }tBTA_BLE_ADV_DATA; 383 384 /* These are the fields returned in each device adv packet. It 385 ** is returned in the results callback if registered. 386 */ 387 typedef struct 388 { 389 UINT8 conn_mode; 390 tBTA_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */ 391 UINT8 flag; 392 UINT8 tx_power_level; 393 UINT8 remote_name_len; 394 UINT8 *p_remote_name; 395 tBTA_BLE_SERVICE service; 396 } tBTA_BLE_INQ_DATA; 397 #endif 398 399 /* BLE customer specific feature function type definitions */ 400 /* data type used on customer specific feature for RSSI monitoring */ 401 #define BTA_BLE_RSSI_ALERT_HI 0 402 #define BTA_BLE_RSSI_ALERT_RANGE 1 403 #define BTA_BLE_RSSI_ALERT_LO 2 404 typedef UINT8 tBTA_DM_BLE_RSSI_ALERT_TYPE; 405 406 #define BTA_BLE_RSSI_ALERT_NONE BTM_BLE_RSSI_ALERT_NONE /* (0) */ 407 #define BTA_BLE_RSSI_ALERT_HI_BIT BTM_BLE_RSSI_ALERT_HI_BIT /* (1) */ 408 #define BTA_BLE_RSSI_ALERT_RANGE_BIT BTM_BLE_RSSI_ALERT_RANGE_BIT /* (1 << 1) */ 409 #define BTA_BLE_RSSI_ALERT_LO_BIT BTM_BLE_RSSI_ALERT_LO_BIT /* (1 << 2) */ 410 typedef UINT8 tBTA_DM_BLE_RSSI_ALERT_MASK; 411 412 413 typedef void (tBTA_DM_BLE_RSSI_CBACK) (BD_ADDR bd_addr, tBTA_DM_BLE_RSSI_ALERT_TYPE alert_type, INT8 rssi); 414 415 /* max number of filter spot for different filter type */ 416 #define BTA_DM_BLE_MAX_UUID_FILTER BTM_BLE_MAX_UUID_FILTER /* 8 */ 417 #define BTA_DM_BLE_MAX_ADDR_FILTER BTM_BLE_MAX_ADDR_FILTER /* 8 */ 418 #define BTA_DM_BLE_PF_STR_COND_MAX BTM_BLE_PF_STR_COND_MAX /* 4 apply to manu data , or local name */ 419 #define BTA_DM_BLE_PF_STR_LEN_MAX BTM_BLE_PF_STR_LEN_MAX /* match for first 20 bytes */ 420 421 #define BTA_DM_BLE_PF_LOGIC_OR 0 422 #define BTA_DM_BLE_PF_LOGIC_AND 1 423 typedef UINT8 tBTA_DM_BLE_PF_LOGIC_TYPE; 424 425 enum 426 { 427 BTA_DM_BLE_SCAN_COND_ADD, 428 BTA_DM_BLE_SCAN_COND_DELETE, 429 BTA_DM_BLE_SCAN_COND_CLEAR = 2 430 }; 431 typedef UINT8 tBTA_DM_BLE_SCAN_COND_OP; 432 433 /* filter selection bit index */ 434 #define BTA_DM_BLE_PF_ADDR_FILTER BTM_BLE_PF_ADDR_FILTER 435 #define BTA_DM_BLE_PF_SRVC_UUID BTM_BLE_PF_SRVC_UUID 436 #define BTA_DM_BLE_PF_SRVC_SOL_UUID BTM_BLE_PF_SRVC_SOL_UUID 437 #define BTA_DM_BLE_PF_LOCAL_NAME BTM_BLE_PF_LOCAL_NAME 438 #define BTA_DM_BLE_PF_MANU_DATA BTM_BLE_PF_MANU_DATA 439 #define BTA_DM_BLE_PF_SRVC_DATA BTM_BLE_PF_SRVC_DATA 440 #define BTA_DM_BLE_PF_TYPE_MAX BTM_BLE_PF_TYPE_MAX 441 #define BTA_DM_BLE_PF_TYPE_ALL BTM_BLE_PF_TYPE_ALL 442 typedef UINT8 tBTA_DM_BLE_PF_COND_TYPE; 443 444 typedef struct 445 { 446 tBLE_BD_ADDR *p_target_addr; /* target address, if NULL, generic UUID filter */ 447 tBT_UUID uuid; /* UUID condition */ 448 tBTA_DM_BLE_PF_LOGIC_TYPE cond_logic; /* AND/OR */ 449 }tBTA_DM_BLE_PF_UUID_COND; 450 451 typedef struct 452 { 453 UINT8 data_len; /* <= 20 bytes */ 454 UINT8 *p_data; 455 }tBTA_DM_BLE_PF_LOCAL_NAME_COND; 456 457 typedef struct 458 { 459 UINT16 company_id; /* company ID */ 460 UINT8 data_len; /* <= 20 bytes */ 461 UINT8 *p_pattern; 462 }tBTA_DM_BLE_PF_MANU_COND; 463 464 typedef union 465 { 466 tBLE_BD_ADDR target_addr; 467 tBTA_DM_BLE_PF_LOCAL_NAME_COND local_name; /* lcoal name filtering */ 468 tBTA_DM_BLE_PF_MANU_COND manu_data; /* manufactuer data filtering */ 469 tBTA_DM_BLE_PF_UUID_COND srvc_uuid; /* service UUID filtering */ 470 tBTA_DM_BLE_PF_UUID_COND solicitate_uuid; /* solicitated service UUID filtering */ 471 }tBTA_DM_BLE_PF_COND_PARAM; 472 473 474 typedef INT8 tBTA_DM_RSSI_VALUE; 475 typedef UINT8 tBTA_DM_LINK_QUALITY_VALUE; 476 477 478 /* signal strength mask */ 479 #define BTA_SIG_STRENGTH_RSSI_MASK 1 480 #define BTA_SIG_STRENGTH_LINK_QUALITY_MASK 2 481 482 typedef UINT8 tBTA_SIG_STRENGTH_MASK; 483 484 485 /* Security Callback Events */ 486 #define BTA_DM_ENABLE_EVT 0 /* Enable Event */ 487 #define BTA_DM_DISABLE_EVT 1 /* Disable Event */ 488 #define BTA_DM_PIN_REQ_EVT 2 /* PIN request. */ 489 #define BTA_DM_AUTH_CMPL_EVT 3 /* Authentication complete indication. */ 490 #define BTA_DM_AUTHORIZE_EVT 4 /* Authorization request. */ 491 #define BTA_DM_LINK_UP_EVT 5 /* Connection UP event */ 492 #define BTA_DM_LINK_DOWN_EVT 6 /* Connection DOWN event */ 493 #define BTA_DM_SIG_STRENGTH_EVT 7 /* Signal strength for bluetooth connection */ 494 #define BTA_DM_BUSY_LEVEL_EVT 8 /* System busy level */ 495 #define BTA_DM_BOND_CANCEL_CMPL_EVT 9 /* Bond cancel complete indication */ 496 #define BTA_DM_SP_CFM_REQ_EVT 10 /* Simple Pairing User Confirmation request. */ 497 #define BTA_DM_SP_KEY_NOTIF_EVT 11 /* Simple Pairing Passkey Notification */ 498 #define BTA_DM_SP_RMT_OOB_EVT 12 /* Simple Pairing Remote OOB Data request. */ 499 #define BTA_DM_SP_KEYPRESS_EVT 13 /* Key press notification event. */ 500 #define BTA_DM_ROLE_CHG_EVT 14 /* Role Change event. */ 501 #define BTA_DM_BLE_KEY_EVT 15 /* BLE SMP key event for peer device keys */ 502 #define BTA_DM_BLE_SEC_REQ_EVT 16 /* BLE SMP security request */ 503 #define BTA_DM_BLE_PASSKEY_NOTIF_EVT 17 /* SMP passkey notification event */ 504 #define BTA_DM_BLE_PASSKEY_REQ_EVT 18 /* SMP passkey request event */ 505 #define BTA_DM_BLE_OOB_REQ_EVT 19 /* SMP OOB request event */ 506 #define BTA_DM_BLE_LOCAL_IR_EVT 20 /* BLE local IR event */ 507 #define BTA_DM_BLE_LOCAL_ER_EVT 21 /* BLE local ER event */ 508 // btla-specific ++ 509 #define BTA_DM_BLE_AUTH_CMPL_EVT 22 /* BLE Auth complete */ 510 // btla-specific -- 511 #define BTA_DM_DEV_UNPAIRED_EVT 23 512 #define BTA_DM_HW_ERROR_EVT 24 /* BT Chip H/W error */ 513 typedef UINT8 tBTA_DM_SEC_EVT; 514 515 /* Structure associated with BTA_DM_ENABLE_EVT */ 516 typedef struct 517 { 518 BD_ADDR bd_addr; /* BD address of local device. */ 519 tBTA_STATUS status; 520 } tBTA_DM_ENABLE; 521 522 /* Structure associated with BTA_DM_PIN_REQ_EVT */ 523 typedef struct 524 { 525 BD_ADDR bd_addr; /* BD address peer device. */ 526 DEV_CLASS dev_class; /* Class of Device */ 527 BD_NAME bd_name; /* Name of peer device. */ 528 } tBTA_DM_PIN_REQ; 529 530 /* BLE related definition */ 531 532 #define BTA_DM_AUTH_FAIL_BASE (HCI_ERR_MAX_ERR + 10) 533 #define BTA_DM_AUTH_CONVERT_SMP_CODE(x) (BTA_DM_AUTH_FAIL_BASE + (x)) 534 #define BTA_DM_AUTH_SMP_PASSKEY_FAIL BTA_DM_AUTH_CONVERT_SMP_CODE (SMP_PASSKEY_ENTRY_FAIL) 535 #define BTA_DM_AUTH_SMP_OOB_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_OOB_FAIL) 536 #define BTA_DM_AUTH_SMP_PAIR_AUTH_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_AUTH_FAIL) 537 #define BTA_DM_AUTH_SMP_CONFIRM_VALUE_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_VALUE_ERR) 538 #define BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_NOT_SUPPORT) 539 #define BTA_DM_AUTH_SMP_ENC_KEY_SIZE (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_KEY_SIZE) 540 #define BTA_DM_AUTH_SMP_INVALID_CMD (BTA_DM_AUTH_FAIL_BASE + SMP_INVALID_CMD) 541 #define BTA_DM_AUTH_SMP_UNKNOWN_ERR (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_FAIL_UNKNOWN) 542 #define BTA_DM_AUTH_SMP_REPEATED_ATTEMPT (BTA_DM_AUTH_FAIL_BASE + SMP_REPEATED_ATTEMPTS) 543 #define BTA_DM_AUTH_SMP_INTERNAL_ERR (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_INTERNAL_ERR) 544 #define BTA_DM_AUTH_SMP_UNKNOWN_IO (BTA_DM_AUTH_FAIL_BASE + SMP_UNKNOWN_IO_CAP) 545 #define BTA_DM_AUTH_SMP_INIT_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_INIT_FAIL) 546 #define BTA_DM_AUTH_SMP_CONFIRM_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_FAIL) 547 #define BTA_DM_AUTH_SMP_BUSY (BTA_DM_AUTH_FAIL_BASE + SMP_BUSY) 548 #define BTA_DM_AUTH_SMP_ENC_FAIL (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_FAIL) 549 #define BTA_DM_AUTH_SMP_RSP_TIMEOUT (BTA_DM_AUTH_FAIL_BASE + SMP_RSP_TIMEOUT) 550 551 /* connection parameter boundary value and dummy value */ 552 #define BTA_DM_BLE_SCAN_INT_MIN BTM_BLE_SCAN_INT_MIN 553 #define BTA_DM_BLE_SCAN_INT_MAX BTM_BLE_SCAN_INT_MAX 554 #define BTA_DM_BLE_SCAN_WIN_MIN BTM_BLE_SCAN_WIN_MIN 555 #define BTA_DM_BLE_SCAN_WIN_MAX BTM_BLE_SCAN_WIN_MAX 556 #define BTA_DM_BLE_CONN_INT_MIN BTM_BLE_CONN_INT_MIN 557 #define BTA_DM_BLE_CONN_INT_MAX BTM_BLE_CONN_INT_MAX 558 #define BTA_DM_BLE_CONN_LATENCY_MAX BTM_BLE_CONN_LATENCY_MAX 559 #define BTA_DM_BLE_CONN_SUP_TOUT_MIN BTM_BLE_CONN_SUP_TOUT_MIN 560 #define BTA_DM_BLE_CONN_SUP_TOUT_MAX BTM_BLE_CONN_SUP_TOUT_MAX 561 #define BTA_DM_BLE_CONN_PARAM_UNDEF BTM_BLE_CONN_PARAM_UNDEF /* use this value when a specific value not to be overwritten */ 562 563 564 #define BTA_LE_KEY_PENC BTM_LE_KEY_PENC /* encryption information of peer device */ 565 #define BTA_LE_KEY_PID BTM_LE_KEY_PID /* identity key of the peer device */ 566 #define BTA_LE_KEY_PCSRK BTM_LE_KEY_PCSRK /* peer SRK */ 567 #define BTA_LE_KEY_LENC BTM_LE_KEY_LENC /* master role security information:div */ 568 #define BTA_LE_KEY_LID BTM_LE_KEY_LID /* master device ID key */ 569 #define BTA_LE_KEY_LCSRK BTM_LE_KEY_LCSRK /* local CSRK has been deliver to peer */ 570 typedef UINT8 tBTA_LE_KEY_TYPE; /* can be used as a bit mask */ 571 572 573 typedef tBTM_LE_PENC_KEYS tBTA_LE_PENC_KEYS ; 574 typedef tBTM_LE_PCSRK_KEYS tBTA_LE_PCSRK_KEYS; 575 typedef tBTM_LE_LENC_KEYS tBTA_LE_LENC_KEYS ; 576 typedef tBTM_LE_LCSRK_KEYS tBTA_LE_LCSRK_KEYS ; 577 typedef tBTM_LE_PID_KEYS tBTA_LE_PID_KEYS ; 578 579 typedef union 580 { 581 tBTA_LE_PENC_KEYS penc_key; /* received peer encryption key */ 582 tBTA_LE_PCSRK_KEYS psrk_key; /* received peer device SRK */ 583 tBTA_LE_PID_KEYS pid_key; /* peer device ID key */ 584 tBTA_LE_LENC_KEYS lenc_key; /* local encryption reproduction keys LTK = = d1(ER,DIV,0)*/ 585 tBTA_LE_LCSRK_KEYS lcsrk_key; /* local device CSRK = d1(ER,DIV,1)*/ 586 }tBTA_LE_KEY_VALUE; 587 588 #define BTA_BLE_LOCAL_KEY_TYPE_ID 1 589 #define BTA_BLE_LOCAL_KEY_TYPE_ER 2 590 typedef UINT8 tBTA_DM_BLE_LOCAL_KEY_MASK; 591 592 typedef struct 593 { 594 BT_OCTET16 ir; 595 BT_OCTET16 irk; 596 BT_OCTET16 dhk; 597 }tBTA_BLE_LOCAL_ID_KEYS; 598 599 #define BTA_DM_SEC_GRANTED BTA_SUCCESS 600 #define BTA_DM_SEC_PAIR_NOT_SPT BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT 601 #define BTA_DM_SEC_REP_ATTEMPTS BTA_DM_AUTH_SMP_REPEATED_ATTEMPT 602 typedef UINT8 tBTA_DM_BLE_SEC_GRANT; 603 604 605 #define BTA_DM_BLE_ONN_NONE BTM_BLE_CONN_NONE 606 #define BTA_DM_BLE_CONN_AUTO BTM_BLE_CONN_AUTO 607 #define BTA_DM_BLE_CONN_SELECTIVE BTM_BLE_CONN_SELECTIVE 608 typedef UINT8 tBTA_DM_BLE_CONN_TYPE; 609 610 typedef BOOLEAN (tBTA_DM_BLE_SEL_CBACK)(BD_ADDR random_bda, UINT8 *p_remote_name); 611 612 /* Structure associated with BTA_DM_BLE_SEC_REQ_EVT */ 613 typedef struct 614 { 615 BD_ADDR bd_addr; /* peer address */ 616 BD_NAME bd_name; /* peer device name */ 617 } tBTA_DM_BLE_SEC_REQ; 618 619 typedef struct 620 { 621 BD_ADDR bd_addr; /* peer address */ 622 tBTM_LE_KEY_TYPE key_type; 623 tBTM_LE_KEY_VALUE key_value; 624 }tBTA_DM_BLE_KEY; 625 626 /* Structure associated with BTA_DM_AUTH_CMPL_EVT */ 627 typedef struct 628 { 629 BD_ADDR bd_addr; /* BD address peer device. */ 630 BD_NAME bd_name; /* Name of peer device. */ 631 BOOLEAN key_present; /* Valid link key value in key element */ 632 LINK_KEY key; /* Link key associated with peer device. */ 633 UINT8 key_type; /* The type of Link Key */ 634 BOOLEAN success; /* TRUE of authentication succeeded, FALSE if failed. */ 635 #if BLE_INCLUDED == TRUE 636 BOOLEAN privacy_enabled; /* used for BLE device only */ 637 #endif 638 UINT8 fail_reason; /* The HCI reason/error code for when success=FALSE */ 639 640 } tBTA_DM_AUTH_CMPL; 641 642 643 /* Structure associated with BTA_DM_AUTHORIZE_EVT */ 644 typedef struct 645 { 646 BD_ADDR bd_addr; /* BD address peer device. */ 647 BD_NAME bd_name; /* Name of peer device. */ 648 tBTA_SERVICE_ID service; /* Service ID to authorize. */ 649 // btla-specific ++ 650 DEV_CLASS dev_class; 651 // btla-specific -- 652 } tBTA_DM_AUTHORIZE; 653 654 /* Structure associated with BTA_DM_LINK_UP_EVT */ 655 typedef struct 656 { 657 BD_ADDR bd_addr; /* BD address peer device. */ 658 } tBTA_DM_LINK_UP; 659 660 /* Structure associated with BTA_DM_LINK_DOWN_EVT */ 661 typedef struct 662 { 663 BD_ADDR bd_addr; /* BD address peer device. */ 664 UINT8 status; /* connection open/closed */ 665 BOOLEAN is_removed; /* TRUE if device is removed when link is down */ 666 } tBTA_DM_LINK_DOWN; 667 668 /* Structure associated with BTA_DM_ROLE_CHG_EVT */ 669 typedef struct 670 { 671 BD_ADDR bd_addr; /* BD address peer device. */ 672 UINT8 new_role; /* the new connection role */ 673 } tBTA_DM_ROLE_CHG; 674 675 /* Structure associated with BTA_DM_SIG_STRENGTH_EVT */ 676 typedef struct 677 { 678 BD_ADDR bd_addr; /* BD address peer device. */ 679 tBTA_SIG_STRENGTH_MASK mask; /* mask for the values that are valid */ 680 tBTA_DM_RSSI_VALUE rssi_value; 681 tBTA_DM_LINK_QUALITY_VALUE link_quality_value; 682 683 } tBTA_DM_SIG_STRENGTH; 684 685 /* Structure associated with BTA_DM_BUSY_LEVEL_EVT */ 686 typedef struct 687 { 688 UINT8 level; /* when paging or inquiring, level is 10. 689 Otherwise, the number of ACL links */ 690 UINT8 level_flags; /* indicates individual flags */ 691 } tBTA_DM_BUSY_LEVEL; 692 693 #define BTA_IO_CAP_OUT BTM_IO_CAP_OUT /* DisplayOnly */ 694 #define BTA_IO_CAP_IO BTM_IO_CAP_IO /* DisplayYesNo */ 695 #define BTA_IO_CAP_IN BTM_IO_CAP_IN /* KeyboardOnly */ 696 #define BTA_IO_CAP_NONE BTM_IO_CAP_NONE /* NoInputNoOutput */ 697 typedef tBTM_IO_CAP tBTA_IO_CAP; 698 699 #define BTA_AUTH_SP_NO BTM_AUTH_SP_NO /* 0 MITM Protection Not Required - Single Profile/non-bonding 700 Numeric comparison with automatic accept allowed */ 701 #define BTA_AUTH_SP_YES BTM_AUTH_SP_YES /* 1 MITM Protection Required - Single Profile/non-bonding 702 Use IO Capabilities to determine authentication procedure */ 703 #define BTA_AUTH_AP_NO BTM_AUTH_AP_NO /* 2 MITM Protection Not Required - All Profiles/dedicated bonding 704 Numeric comparison with automatic accept allowed */ 705 #define BTA_AUTH_AP_YES BTM_AUTH_AP_YES /* 3 MITM Protection Required - All Profiles/dedicated bonding 706 Use IO Capabilities to determine authentication procedure */ 707 #define BTA_AUTH_SPGB_NO BTM_AUTH_SPGB_NO /* 4 MITM Protection Not Required - Single Profiles/general bonding 708 Numeric comparison with automatic accept allowed */ 709 #define BTA_AUTH_SPGB_YES BTM_AUTH_SPGB_YES /* 5 MITM Protection Required - Single Profiles/general bonding 710 Use IO Capabilities to determine authentication procedure */ 711 typedef tBTM_AUTH_REQ tBTA_AUTH_REQ; 712 713 #define BTA_AUTH_DD_BOND BTM_AUTH_DD_BOND /* 2 this bit is set for dedicated bonding */ 714 #define BTA_AUTH_GEN_BOND BTM_AUTH_SPGB_NO /* 4 this bit is set for general bonding */ 715 #define BTA_AUTH_BONDS BTM_AUTH_BONDS /* 6 the general/dedicated bonding bits */ 716 717 #define BTA_LE_AUTH_NO_BOND BTM_LE_AUTH_REQ_NO_BOND /* 0*/ 718 #define BTA_LE_AUTH_BOND BTM_LE_AUTH_REQ_BOND /* 1 << 0 */ 719 #define BTA_LE_AUTH_REQ_MITM BTM_LE_AUTH_REQ_MITM /* 1 << 2 */ 720 typedef tBTM_LE_AUTH_REQ tBTA_LE_AUTH_REQ; /* combination of the above bit pattern */ 721 722 #define BTA_OOB_NONE BTM_OOB_NONE 723 #define BTA_OOB_PRESENT BTM_OOB_PRESENT 724 #if BTM_OOB_INCLUDED == TRUE 725 #define BTA_OOB_UNKNOWN BTM_OOB_UNKNOWN 726 #endif 727 typedef tBTM_OOB_DATA tBTA_OOB_DATA; 728 729 /* Structure associated with BTA_DM_SP_CFM_REQ_EVT */ 730 typedef struct 731 { 732 /* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */ 733 BD_ADDR bd_addr; /* peer address */ 734 DEV_CLASS dev_class; /* peer CoD */ 735 BD_NAME bd_name; /* peer device name */ 736 UINT32 num_val; /* the numeric value for comparison. If just_works, do not show this number to UI */ 737 BOOLEAN just_works; /* TRUE, if "Just Works" association model */ 738 tBTA_AUTH_REQ loc_auth_req; /* Authentication required for local device */ 739 tBTA_AUTH_REQ rmt_auth_req; /* Authentication required for peer device */ 740 tBTA_IO_CAP loc_io_caps; /* IO Capabilities of local device */ 741 tBTA_AUTH_REQ rmt_io_caps; /* IO Capabilities of remote device */ 742 } tBTA_DM_SP_CFM_REQ; 743 744 enum 745 { 746 BTA_SP_KEY_STARTED, /* passkey entry started */ 747 BTA_SP_KEY_ENTERED, /* passkey digit entered */ 748 BTA_SP_KEY_ERASED, /* passkey digit erased */ 749 BTA_SP_KEY_CLEARED, /* passkey cleared */ 750 BTA_SP_KEY_COMPLT /* passkey entry completed */ 751 }; 752 typedef UINT8 tBTA_SP_KEY_TYPE; 753 754 /* Structure associated with BTA_DM_SP_KEYPRESS_EVT */ 755 typedef struct 756 { 757 BD_ADDR bd_addr; /* peer address */ 758 tBTA_SP_KEY_TYPE notif_type; 759 }tBTA_DM_SP_KEY_PRESS; 760 761 /* Structure associated with BTA_DM_SP_KEY_NOTIF_EVT */ 762 typedef struct 763 { 764 /* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */ 765 BD_ADDR bd_addr; /* peer address */ 766 DEV_CLASS dev_class; /* peer CoD */ 767 BD_NAME bd_name; /* peer device name */ 768 UINT32 passkey; /* the numeric value for comparison. If just_works, do not show this number to UI */ 769 } tBTA_DM_SP_KEY_NOTIF; 770 771 /* Structure associated with BTA_DM_SP_RMT_OOB_EVT */ 772 typedef struct 773 { 774 /* Note: First 3 data members must be, bd_addr, dev_class, and bd_name in order */ 775 BD_ADDR bd_addr; /* peer address */ 776 DEV_CLASS dev_class; /* peer CoD */ 777 BD_NAME bd_name; /* peer device name */ 778 } tBTA_DM_SP_RMT_OOB; 779 780 /* Structure associated with BTA_DM_BOND_CANCEL_CMPL_EVT */ 781 typedef struct 782 { 783 tBTA_STATUS result; /* TRUE of bond cancel succeeded, FALSE if failed. */ 784 } tBTA_DM_BOND_CANCEL_CMPL; 785 786 /* Union of all security callback structures */ 787 typedef union 788 { 789 tBTA_DM_ENABLE enable; /* BTA enabled */ 790 tBTA_DM_PIN_REQ pin_req; /* PIN request. */ 791 tBTA_DM_AUTH_CMPL auth_cmpl; /* Authentication complete indication. */ 792 tBTA_DM_AUTHORIZE authorize; /* Authorization request. */ 793 tBTA_DM_LINK_UP link_up; /* ACL connection down event */ 794 tBTA_DM_LINK_DOWN link_down; /* ACL connection down event */ 795 tBTA_DM_SIG_STRENGTH sig_strength; /* rssi and link quality value */ 796 tBTA_DM_BUSY_LEVEL busy_level; /* System busy level */ 797 tBTA_DM_SP_CFM_REQ cfm_req; /* user confirm request */ 798 tBTA_DM_SP_KEY_NOTIF key_notif; /* passkey notification */ 799 tBTA_DM_SP_RMT_OOB rmt_oob; /* remote oob */ 800 tBTA_DM_BOND_CANCEL_CMPL bond_cancel_cmpl; /* Bond Cancel Complete indication */ 801 tBTA_DM_SP_KEY_PRESS key_press; /* key press notification event */ 802 tBTA_DM_ROLE_CHG role_chg; /* role change event */ 803 tBTA_DM_BLE_SEC_REQ ble_req; /* BLE SMP related request */ 804 tBTA_DM_BLE_KEY ble_key; /* BLE SMP keys used when pairing */ 805 tBTA_BLE_LOCAL_ID_KEYS ble_id_keys; /* IR event */ 806 BT_OCTET16 ble_er; /* ER event data */ 807 } tBTA_DM_SEC; 808 809 /* Security callback */ 810 typedef void (tBTA_DM_SEC_CBACK)(tBTA_DM_SEC_EVT event, tBTA_DM_SEC *p_data); 811 812 /* Vendor Specific Command Callback */ 813 typedef tBTM_VSC_CMPL_CB tBTA_VENDOR_CMPL_CBACK; 814 815 /* Search callback events */ 816 #define BTA_DM_INQ_RES_EVT 0 /* Inquiry result for a peer device. */ 817 #define BTA_DM_INQ_CMPL_EVT 1 /* Inquiry complete. */ 818 #define BTA_DM_DISC_RES_EVT 2 /* Discovery result for a peer device. */ 819 #define BTA_DM_DISC_BLE_RES_EVT 3 /* Discovery result for BLE GATT based servoce on a peer device. */ 820 #define BTA_DM_DISC_CMPL_EVT 4 /* Discovery complete. */ 821 #define BTA_DM_DI_DISC_CMPL_EVT 5 /* Discovery complete. */ 822 #define BTA_DM_SEARCH_CANCEL_CMPL_EVT 6 /* Search cancelled */ 823 824 typedef UINT8 tBTA_DM_SEARCH_EVT; 825 826 #define BTA_DM_INQ_RES_IGNORE_RSSI BTM_INQ_RES_IGNORE_RSSI /* 0x7f RSSI value not supplied (ignore it) */ 827 828 /* Structure associated with BTA_DM_INQ_RES_EVT */ 829 typedef struct 830 { 831 BD_ADDR bd_addr; /* BD address peer device. */ 832 DEV_CLASS dev_class; /* Device class of peer device. */ 833 BOOLEAN remt_name_not_required; /* Application sets this flag if it already knows the name of the device */ 834 /* If the device name is known to application BTA skips the remote name request */ 835 BOOLEAN is_limited; /* TRUE, if the limited inquiry bit is set in the CoD */ 836 INT8 rssi; /* The rssi value */ 837 UINT8 *p_eir; /* received EIR */ 838 #if (BLE_INCLUDED == TRUE) 839 UINT8 inq_result_type; 840 UINT8 ble_addr_type; 841 tBTM_BLE_EVT_TYPE ble_evt_type; 842 tBT_DEVICE_TYPE device_type; 843 #endif 844 845 } tBTA_DM_INQ_RES; 846 847 /* Structure associated with BTA_DM_INQ_CMPL_EVT */ 848 typedef struct 849 { 850 UINT8 num_resps; /* Number of inquiry responses. */ 851 } tBTA_DM_INQ_CMPL; 852 853 /* Structure associated with BTA_DM_DI_DISC_CMPL_EVT */ 854 typedef struct 855 { 856 BD_ADDR bd_addr; /* BD address peer device. */ 857 UINT8 num_record; /* Number of DI record */ 858 tBTA_STATUS result; 859 } tBTA_DM_DI_DISC_CMPL; 860 861 /* Structure associated with BTA_DM_DISC_RES_EVT */ 862 typedef struct 863 { 864 BD_ADDR bd_addr; /* BD address peer device. */ 865 BD_NAME bd_name; /* Name of peer device. */ 866 tBTA_SERVICE_MASK services; /* Services found on peer device. */ 867 // btla-specific ++ 868 UINT8 * p_raw_data; /* Raw data for discovery DB */ 869 UINT32 raw_data_size; /* size of raw data */ 870 tBT_DEVICE_TYPE device_type; /* device type in case it is BLE device */ 871 UINT32 num_uuids; 872 UINT8 *p_uuid_list; 873 // btla-specific -- 874 tBTA_STATUS result; 875 } tBTA_DM_DISC_RES; 876 877 /* Structure associated with tBTA_DM_DISC_BLE_RES */ 878 typedef struct 879 { 880 BD_ADDR bd_addr; /* BD address peer device. */ 881 BD_NAME bd_name; /* Name of peer device. */ 882 tBT_UUID service; /* GATT based Services UUID found on peer device. */ 883 } tBTA_DM_DISC_BLE_RES; 884 885 886 /* Union of all search callback structures */ 887 typedef union 888 { 889 tBTA_DM_INQ_RES inq_res; /* Inquiry result for a peer device. */ 890 tBTA_DM_INQ_CMPL inq_cmpl; /* Inquiry complete. */ 891 tBTA_DM_DISC_RES disc_res; /* Discovery result for a peer device. */ 892 tBTA_DM_DISC_BLE_RES disc_ble_res; /* discovery result for GATT based service */ 893 tBTA_DM_DI_DISC_CMPL di_disc; /* DI discovery result for a peer device */ 894 895 } tBTA_DM_SEARCH; 896 897 /* Search callback */ 898 typedef void (tBTA_DM_SEARCH_CBACK)(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data); 899 900 /* Execute call back */ 901 typedef void (tBTA_DM_EXEC_CBACK) (void * p_param); 902 903 /* Encryption callback*/ 904 typedef void (tBTA_DM_ENCRYPT_CBACK) (BD_ADDR bd_addr, tBTA_STATUS result); 905 906 #if BLE_INCLUDED == TRUE 907 #define BTA_DM_BLE_SEC_NONE BTM_BLE_SEC_NONE 908 #define BTA_DM_BLE_SEC_ENCRYPT BTM_BLE_SEC_ENCRYPT 909 #define BTA_DM_BLE_SEC_NO_MITM BTM_BLE_SEC_ENCRYPT_NO_MITM 910 #define BTA_DM_BLE_SEC_MITM BTM_BLE_SEC_ENCRYPT_MITM 911 typedef tBTM_BLE_SEC_ACT tBTA_DM_BLE_SEC_ACT; 912 #else 913 typedef UINT8 tBTA_DM_BLE_SEC_ACT; 914 #endif 915 916 /* Maximum service name length */ 917 #define BTA_SERVICE_NAME_LEN 35 918 #define BTA_SERVICE_DESP_LEN BTA_SERVICE_NAME_LEN 919 #define BTA_PROVIDER_NAME_LEN BTA_SERVICE_NAME_LEN 920 921 922 /* link policy masks */ 923 #define BTA_DM_LP_SWITCH HCI_ENABLE_MASTER_SLAVE_SWITCH 924 #define BTA_DM_LP_HOLD HCI_ENABLE_HOLD_MODE 925 #define BTA_DM_LP_SNIFF HCI_ENABLE_SNIFF_MODE 926 #define BTA_DM_LP_PARK HCI_ENABLE_PARK_MODE 927 typedef UINT16 tBTA_DM_LP_MASK; 928 929 /* power mode actions */ 930 #define BTA_DM_PM_NO_ACTION 0x00 /* no change to the current pm setting */ 931 #define BTA_DM_PM_PARK 0x10 /* prefers park mode */ 932 #define BTA_DM_PM_SNIFF 0x20 /* prefers sniff mode */ 933 #define BTA_DM_PM_SNIFF1 0x21 /* prefers sniff1 mode */ 934 #define BTA_DM_PM_SNIFF2 0x22 /* prefers sniff2 mode */ 935 #define BTA_DM_PM_SNIFF3 0x23 /* prefers sniff3 mode */ 936 #define BTA_DM_PM_SNIFF4 0x24 /* prefers sniff4 mode */ 937 #define BTA_DM_PM_SNIFF5 0x25 /* prefers sniff5 mode */ 938 #define BTA_DM_PM_SNIFF6 0x26 /* prefers sniff6 mode */ 939 #define BTA_DM_PM_SNIFF7 0x27 /* prefers sniff7 mode */ 940 #define BTA_DM_PM_SNIFF_USER0 0x28 /* prefers user-defined sniff0 mode (testtool only) */ 941 #define BTA_DM_PM_SNIFF_USER1 0x29 /* prefers user-defined sniff1 mode (testtool only) */ 942 #define BTA_DM_PM_ACTIVE 0x40 /* prefers active mode */ 943 #define BTA_DM_PM_RETRY 0x80 /* retry power mode based on current settings */ 944 #define BTA_DM_PM_NO_PREF 0x01 /* service has no prefernce on power mode setting. eg. connection to service got closed */ 945 946 typedef UINT8 tBTA_DM_PM_ACTTION; 947 948 /* index to bta_dm_ssr_spec */ 949 #define BTA_DM_PM_SSR0 0 950 #define BTA_DM_PM_SSR1 1 /* BTA_DM_PM_SSR1 will be dedicated for 951 HH SSR setting entry, no other profile can use it */ 952 #define BTA_DM_PM_SSR2 2 953 #define BTA_DM_PM_SSR3 3 954 #define BTA_DM_PM_SSR4 4 955 #define BTA_DM_PM_SSR5 5 956 #define BTA_DM_PM_SSR6 6 957 958 #define BTA_DM_PM_NUM_EVTS 9 959 960 #ifndef BTA_DM_PM_PARK_IDX 961 #define BTA_DM_PM_PARK_IDX 5 /* the actual index to bta_dm_pm_md[] for PARK mode */ 962 #endif 963 964 #define BTA_DM_SW_BB_TO_MM BTM_SW_BB_TO_MM 965 #define BTA_DM_SW_MM_TO_BB BTM_SW_MM_TO_BB 966 #define BTA_DM_SW_BB_TO_BTC BTM_SW_BB_TO_BTC 967 #define BTA_DM_SW_BTC_TO_BB BTM_SW_BTC_TO_BB 968 969 typedef tBTM_SW_DIR tBTA_DM_SW_DIR; 970 971 /* Switch callback events */ 972 #define BTA_DM_SWITCH_CMPL_EVT 0 /* Completion of the Switch API */ 973 974 typedef UINT8 tBTA_DM_SWITCH_EVT; 975 typedef void (tBTA_DM_SWITCH_CBACK)(tBTA_DM_SWITCH_EVT event, tBTA_STATUS status); 976 977 /* Audio routing out configuration */ 978 #define BTA_DM_ROUTE_NONE 0x00 /* No Audio output */ 979 #define BTA_DM_ROUTE_DAC 0x01 /* routing over analog output */ 980 #define BTA_DM_ROUTE_I2S 0x02 /* routing over digital (I2S) output */ 981 #define BTA_DM_ROUTE_BT_MONO 0x04 /* routing over SCO */ 982 #define BTA_DM_ROUTE_BT_STEREO 0x08 /* routing over BT Stereo */ 983 #define BTA_DM_ROUTE_HOST 0x10 /* routing over Host */ 984 #define BTA_DM_ROUTE_FMTX 0x20 /* routing over FMTX */ 985 #define BTA_DM_ROUTE_FMRX 0x40 /* routing over FMRX */ 986 #define BTA_DM_ROUTE_BTSNK 0x80 /* routing over BT SNK */ 987 988 typedef UINT8 tBTA_DM_ROUTE_PATH; 989 990 991 /* Device Identification (DI) data structure 992 */ 993 /* Used to set the DI record */ 994 typedef tSDP_DI_RECORD tBTA_DI_RECORD; 995 /* Used to get the DI record */ 996 typedef tSDP_DI_GET_RECORD tBTA_DI_GET_RECORD; 997 /* SDP discovery database */ 998 typedef tSDP_DISCOVERY_DB tBTA_DISCOVERY_DB; 999 1000 #ifndef BTA_DI_NUM_MAX 1001 #define BTA_DI_NUM_MAX 3 1002 #endif 1003 1004 /* Device features mask definitions */ 1005 #define BTA_FEATURE_BYTES_PER_PAGE BTM_FEATURE_BYTES_PER_PAGE 1006 #define BTA_EXT_FEATURES_PAGE_MAX BTM_EXT_FEATURES_PAGE_MAX 1007 1008 /***************************************************************************** 1009 ** External Function Declarations 1010 *****************************************************************************/ 1011 #ifdef __cplusplus 1012 extern "C" 1013 { 1014 #endif 1015 1016 /******************************************************************************* 1017 ** 1018 ** Function BTA_EnableBluetooth 1019 ** 1020 ** Description This function initializes BTA and prepares BTA and the 1021 ** Bluetooth protocol stack for use. This function is 1022 ** typically called at startup or when Bluetooth services 1023 ** are required by the phone. This function must be called 1024 ** before calling any other API function. 1025 ** 1026 ** 1027 ** Returns BTA_SUCCESS if successful. 1028 ** BTA_FAIL if internal failure. 1029 ** 1030 *******************************************************************************/ 1031 BTA_API extern tBTA_STATUS BTA_EnableBluetooth(tBTA_DM_SEC_CBACK *p_cback); 1032 1033 /******************************************************************************* 1034 ** 1035 ** Function BTA_DisableBluetooth 1036 ** 1037 ** Description This function disables BTA and the Bluetooth protocol 1038 ** stack. It is called when BTA is no longer being used 1039 ** by any application in the system. 1040 ** 1041 ** 1042 ** Returns void 1043 ** 1044 *******************************************************************************/ 1045 BTA_API extern tBTA_STATUS BTA_DisableBluetooth(void); 1046 1047 /******************************************************************************* 1048 ** 1049 ** Function BTA_EnableTestMode 1050 ** 1051 ** Description Enables bluetooth device under test mode 1052 ** 1053 ** 1054 ** Returns tBTA_STATUS 1055 ** 1056 *******************************************************************************/ 1057 BTA_API extern tBTA_STATUS BTA_EnableTestMode(void); 1058 1059 /******************************************************************************* 1060 ** 1061 ** Function BTA_DisableTestMode 1062 ** 1063 ** Description Disable bluetooth device under test mode 1064 ** 1065 ** 1066 ** Returns None 1067 ** 1068 *******************************************************************************/ 1069 BTA_API extern void BTA_DisableTestMode(void); 1070 1071 /******************************************************************************* 1072 ** 1073 ** Function BTA_DmIsDeviceUp 1074 ** 1075 ** Description This function tests whether the Bluetooth module is up 1076 ** and ready. This is a direct execution function that 1077 ** may lock task scheduling on some platforms. 1078 ** 1079 ** 1080 ** Returns TRUE if the module is ready. 1081 ** FALSE if the module is not ready. 1082 ** 1083 *******************************************************************************/ 1084 BTA_API extern BOOLEAN BTA_DmIsDeviceUp(void); 1085 1086 /******************************************************************************* 1087 ** 1088 ** Function BTA_DmSetDeviceName 1089 ** 1090 ** Description This function sets the Bluetooth name of the local device. 1091 ** 1092 ** 1093 ** Returns void 1094 ** 1095 *******************************************************************************/ 1096 BTA_API extern void BTA_DmSetDeviceName(char *p_name); 1097 1098 /******************************************************************************* 1099 ** 1100 ** Function BTA_DmSetVisibility 1101 ** 1102 ** Description This function sets the Bluetooth connectable,discoverable, 1103 ** pairable and conn paired only modesmodes of the local device. 1104 ** This controls whether other Bluetooth devices can find and connect to 1105 ** the local device. 1106 ** 1107 ** 1108 ** Returns void 1109 ** 1110 *******************************************************************************/ 1111 BTA_API extern void BTA_DmSetVisibility(tBTA_DM_DISC disc_mode, tBTA_DM_CONN conn_mode, UINT8 pairable_mode, UINT8 conn_filter); 1112 1113 /******************************************************************************* 1114 ** 1115 ** Function BTA_DmSetScanParam 1116 ** 1117 ** Description This function sets the parameters for page scan and 1118 ** inquiry scan. 1119 ** 1120 ** 1121 ** Returns void 1122 ** 1123 *******************************************************************************/ 1124 BTA_API extern void BTA_DmSetScanParam (UINT16 page_scan_interval, UINT16 page_scan_window, 1125 UINT16 inquiry_scan_interval, UINT16 inquiry_scan_window); 1126 1127 /******************************************************************************* 1128 ** 1129 ** Function BTA_DmSetAfhChannels 1130 ** 1131 ** Description This function sets the AFH first and 1132 ** last disable channel, so channels within 1133 ** that range are disabled. 1134 ** In order to use this API, BTM_BYPASS_AMP_AUTO_AFH must be set 1135 ** to be TRUE 1136 ** 1137 ** Returns void 1138 ** 1139 *******************************************************************************/ 1140 BTA_API extern void BTA_DmSetAfhChannels(UINT8 first, UINT8 last); 1141 1142 1143 /******************************************************************************* 1144 ** 1145 ** Function BTA_DmVendorSpecificCommand 1146 ** 1147 ** Description This function sends the vendor specific command 1148 ** to the controller 1149 ** 1150 ** 1151 ** Returns tBTA_STATUS 1152 ** 1153 *******************************************************************************/ 1154 BTA_API extern tBTA_STATUS BTA_DmVendorSpecificCommand (UINT16 opcode, UINT8 param_len,UINT8 *p_param_buf, tBTA_VENDOR_CMPL_CBACK *p_cback); 1155 1156 1157 /******************************************************************************* 1158 ** 1159 ** Function BTA_DmSearch 1160 ** 1161 ** Description This function searches for peer Bluetooth devices. It 1162 ** first performs an inquiry; for each device found from the 1163 ** inquiry it gets the remote name of the device. If 1164 ** parameter services is nonzero, service discovery will be 1165 ** performed on each device for the services specified. 1166 ** 1167 ** 1168 ** Returns void 1169 ** 1170 *******************************************************************************/ 1171 BTA_API extern void BTA_DmSearch(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK services, 1172 tBTA_DM_SEARCH_CBACK *p_cback); 1173 1174 /******************************************************************************* 1175 ** 1176 ** Function BTA_DmSearchCancel 1177 ** 1178 ** Description This function cancels a search that has been initiated 1179 ** by calling BTA_DmSearch(). 1180 ** 1181 ** 1182 ** Returns void 1183 ** 1184 *******************************************************************************/ 1185 BTA_API extern void BTA_DmSearchCancel(void); 1186 1187 /******************************************************************************* 1188 ** 1189 ** Function BTA_DmDiscover 1190 ** 1191 ** Description This function performs service discovery for the services 1192 ** of a particular peer device. 1193 ** 1194 ** 1195 ** Returns void 1196 ** 1197 *******************************************************************************/ 1198 BTA_API extern void BTA_DmDiscover(BD_ADDR bd_addr, tBTA_SERVICE_MASK services, 1199 tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search); 1200 1201 // btla-specific ++ 1202 /******************************************************************************* 1203 ** 1204 ** Function BTA_DmDiscoverUUID 1205 ** 1206 ** Description This function performs service discovery for the services 1207 ** of a particular peer device. 1208 ** 1209 ** 1210 ** Returns void 1211 ** 1212 *******************************************************************************/ 1213 BTA_API extern void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID *uuid, 1214 tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search); 1215 1216 /******************************************************************************* 1217 ** 1218 ** Function BTA_DmGetCachedRemoteName 1219 ** 1220 ** Description Retieve cached remote name if available 1221 ** 1222 ** Returns BTA_SUCCESS if cached name was retrieved 1223 ** BTA_FAILURE if cached name is not available 1224 ** 1225 *******************************************************************************/ 1226 tBTA_STATUS BTA_DmGetCachedRemoteName(BD_ADDR remote_device, UINT8 **pp_cached_name); 1227 // btla-specific -- 1228 1229 /******************************************************************************* 1230 ** 1231 ** Function BTA_DmIsMaster 1232 ** 1233 ** Description This function checks if the local device is the master of 1234 ** the link to the given device 1235 ** 1236 ** Returns TRUE if master. 1237 ** FALSE if not. 1238 ** 1239 *******************************************************************************/ 1240 BTA_API extern BOOLEAN BTA_DmIsMaster(BD_ADDR bd_addr); 1241 1242 /******************************************************************************* 1243 ** 1244 ** Function BTA_DmBond 1245 ** 1246 ** Description This function initiates a bonding procedure with a peer 1247 ** device. The bonding procedure enables authentication 1248 ** and optionally encryption on the Bluetooth link. 1249 ** 1250 ** 1251 ** Returns void 1252 ** 1253 *******************************************************************************/ 1254 BTA_API extern void BTA_DmBond(BD_ADDR bd_addr); 1255 1256 /******************************************************************************* 1257 ** 1258 ** Function BTA_DmBondCancel 1259 ** 1260 ** Description This function cancels a bonding procedure with a peer 1261 ** device. 1262 ** 1263 ** 1264 ** Returns void 1265 ** 1266 *******************************************************************************/ 1267 BTA_API extern void BTA_DmBondCancel(BD_ADDR bd_addr); 1268 1269 /******************************************************************************* 1270 ** 1271 ** Function BTA_DmPinReply 1272 ** 1273 ** Description This function provides a PIN when one is requested by DM 1274 ** during a bonding procedure. The application should call 1275 ** this function after the security callback is called with 1276 ** a BTA_DM_PIN_REQ_EVT. 1277 ** 1278 ** 1279 ** Returns void 1280 ** 1281 *******************************************************************************/ 1282 BTA_API extern void BTA_DmPinReply(BD_ADDR bd_addr, BOOLEAN accept, UINT8 pin_len, 1283 UINT8 *p_pin); 1284 1285 /******************************************************************************* 1286 ** 1287 ** Function BTA_DmLinkPolicy 1288 ** 1289 ** Description This function sets/clears the link policy mask to the given 1290 ** bd_addr. 1291 ** If clearing the sniff or park mode mask, the link is put 1292 ** in active mode. 1293 ** 1294 ** Returns void 1295 ** 1296 *******************************************************************************/ 1297 BTA_API extern void BTA_DmLinkPolicy(BD_ADDR bd_addr, tBTA_DM_LP_MASK policy_mask, 1298 BOOLEAN set); 1299 1300 #if (BTM_OOB_INCLUDED == TRUE) 1301 /******************************************************************************* 1302 ** 1303 ** Function BTA_DmLocalOob 1304 ** 1305 ** Description This function retrieves the OOB data from local controller. 1306 ** The result is reported by bta_dm_co_loc_oob(). 1307 ** 1308 ** Returns void 1309 ** 1310 *******************************************************************************/ 1311 BTA_API extern void BTA_DmLocalOob(void); 1312 #endif /* BTM_OOB_INCLUDED */ 1313 1314 /******************************************************************************* 1315 ** 1316 ** Function BTA_DmConfirm 1317 ** 1318 ** Description This function accepts or rejects the numerical value of the 1319 ** Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT 1320 ** 1321 ** Returns void 1322 ** 1323 *******************************************************************************/ 1324 BTA_API extern void BTA_DmConfirm(BD_ADDR bd_addr, BOOLEAN accept); 1325 1326 /******************************************************************************* 1327 ** 1328 ** Function BTA_DmPasskeyCancel 1329 ** 1330 ** Description This function is called to cancel the simple pairing process 1331 ** reported by BTA_DM_SP_KEY_NOTIF_EVT 1332 ** 1333 ** Returns void 1334 ** 1335 *******************************************************************************/ 1336 BTA_API extern void BTA_DmPasskeyCancel(BD_ADDR bd_addr); 1337 1338 /******************************************************************************* 1339 ** 1340 ** Function BTA_DmAddDevice 1341 ** 1342 ** Description This function adds a device to the security database list 1343 ** of peer devices. This function would typically be called 1344 ** at system startup to initialize the security database with 1345 ** known peer devices. This is a direct execution function 1346 ** that may lock task scheduling on some platforms. 1347 ** 1348 ** Returns void 1349 ** 1350 *******************************************************************************/ 1351 BTA_API extern void BTA_DmAddDevice(BD_ADDR bd_addr, DEV_CLASS dev_class, 1352 LINK_KEY link_key, tBTA_SERVICE_MASK trusted_mask, 1353 BOOLEAN is_trusted, UINT8 key_type, 1354 tBTA_IO_CAP io_cap); 1355 1356 /******************************************************************************* 1357 ** 1358 ** Function BTA_DmAddDevWithName 1359 ** 1360 ** Description This function is newer version of BTA_DmAddDevice() 1361 ** which added bd_name and features as input parameters. 1362 ** 1363 ** 1364 ** Returns void 1365 ** 1366 ** Note: features points to the remote device features array. 1367 ** The array size is 1368 ** BTA_FEATURE_BYTES_PER_PAGE * (BTA_EXT_FEATURES_PAGE_MAX + 1) 1369 ** 1370 *******************************************************************************/ 1371 BTA_API extern void BTA_DmAddDevWithName (BD_ADDR bd_addr, DEV_CLASS dev_class, 1372 BD_NAME bd_name, UINT8 *features, 1373 LINK_KEY link_key, tBTA_SERVICE_MASK trusted_mask, 1374 BOOLEAN is_trusted, UINT8 key_type, tBTA_IO_CAP io_cap); 1375 1376 /******************************************************************************* 1377 ** 1378 ** Function BTA_DmRemoveDevice 1379 ** 1380 ** Description This function removes a device from the security database. 1381 ** This is a direct execution function that may lock task 1382 ** scheduling on some platforms. 1383 ** 1384 ** 1385 ** Returns BTA_SUCCESS if successful. 1386 ** BTA_FAIL if operation failed. 1387 ** 1388 *******************************************************************************/ 1389 BTA_API extern tBTA_STATUS BTA_DmRemoveDevice(BD_ADDR bd_addr); 1390 1391 /******************************************************************************* 1392 ** 1393 ** Function BTA_DmAuthorizeReply 1394 ** 1395 ** Description This function provides an authorization reply when 1396 ** authorization is requested by BTA. The application calls 1397 ** this function after the security callback is called with 1398 ** a BTA_DM_AUTHORIZE_EVT. 1399 ** 1400 ** 1401 ** Returns void 1402 ** 1403 *******************************************************************************/ 1404 BTA_API extern void BTA_DmAuthorizeReply(BD_ADDR bd_addr, tBTA_SERVICE_ID service, 1405 tBTA_AUTH_RESP response); 1406 1407 /******************************************************************************* 1408 ** 1409 ** Function BTA_DmSignalStrength 1410 ** 1411 ** Description This function initiates RSSI and channnel quality 1412 ** measurments. BTA_DM_SIG_STRENGTH_EVT is sent to 1413 ** application with the values of RSSI and channel 1414 ** quality 1415 ** 1416 ** 1417 ** Returns void 1418 ** 1419 *******************************************************************************/ 1420 BTA_API extern void BTA_DmSignalStrength(tBTA_SIG_STRENGTH_MASK mask, UINT16 period, BOOLEAN start); 1421 1422 /******************************************************************************* 1423 ** 1424 ** Function BTA_DmWriteInqTxPower 1425 ** 1426 ** Description This command is used to write the inquiry transmit power level 1427 ** used to transmit the inquiry (ID) data packets. 1428 ** 1429 ** Parameters tx_power - tx inquiry power to use, valid value is -70 ~ 20 1430 1431 ** Returns void 1432 ** 1433 *******************************************************************************/ 1434 BTA_API extern void BTA_DmWriteInqTxPower(INT8 tx_power); 1435 1436 /******************************************************************************* 1437 ** 1438 ** Function BTA_DmEirAddUUID 1439 ** 1440 ** Description This function is called to add UUID into EIR. 1441 ** 1442 ** Parameters tBT_UUID - UUID 1443 ** 1444 ** Returns None 1445 ** 1446 *******************************************************************************/ 1447 BTA_API extern void BTA_DmEirAddUUID (tBT_UUID *p_uuid); 1448 1449 /******************************************************************************* 1450 ** 1451 ** Function BTA_DmEirRemoveUUID 1452 ** 1453 ** Description This function is called to remove UUID from EIR. 1454 ** 1455 ** Parameters tBT_UUID - UUID 1456 ** 1457 ** Returns None 1458 ** 1459 *******************************************************************************/ 1460 BTA_API extern void BTA_DmEirRemoveUUID (tBT_UUID *p_uuid); 1461 1462 /******************************************************************************* 1463 ** 1464 ** Function BTA_DmSetEIRConfig 1465 ** 1466 ** Description This function is called to override the BTA default EIR parameters. 1467 ** This funciton is only valid in a system where BTU & App task 1468 ** are in the same memory space. 1469 ** 1470 ** Parameters Pointer to User defined EIR config 1471 ** 1472 ** Returns None 1473 ** 1474 *******************************************************************************/ 1475 BTA_API extern void BTA_DmSetEIRConfig (tBTA_DM_EIR_CONF *p_eir_cfg); 1476 1477 /******************************************************************************* 1478 ** 1479 ** Function BTA_CheckEirData 1480 ** 1481 ** Description This function is called to get EIR data from significant part. 1482 ** 1483 ** Parameters p_eir - pointer of EIR significant part 1484 ** type - finding EIR data type 1485 ** p_length - return the length of EIR data 1486 ** 1487 ** Returns pointer of EIR data 1488 ** 1489 *******************************************************************************/ 1490 BTA_API extern UINT8 *BTA_CheckEirData( UINT8 *p_eir, UINT8 tag, UINT8 *p_length ); 1491 1492 /******************************************************************************* 1493 ** 1494 ** Function BTA_GetEirService 1495 ** 1496 ** Description This function is called to get BTA service mask from EIR. 1497 ** 1498 ** Parameters p_eir - pointer of EIR significant part 1499 ** p_services - return the BTA service mask 1500 ** 1501 ** Returns None 1502 ** 1503 *******************************************************************************/ 1504 BTA_API extern void BTA_GetEirService( UINT8 *p_eir, tBTA_SERVICE_MASK *p_services ); 1505 1506 /******************************************************************************* 1507 ** 1508 ** Function BTA_DmUseSsr 1509 ** 1510 ** Description This function is called to check if the connected peer device 1511 ** supports SSR or not. 1512 ** 1513 ** Returns TRUE, if SSR is supported 1514 ** 1515 *******************************************************************************/ 1516 BTA_API extern BOOLEAN BTA_DmUseSsr( BD_ADDR bd_addr ); 1517 1518 1519 /******************************************************************************* 1520 ** 1521 ** Function BTA_DmSetLocalDiRecord 1522 ** 1523 ** Description This function adds a DI record to the local SDP database. 1524 ** 1525 ** Returns BTA_SUCCESS if record set sucessfully, otherwise error code. 1526 ** 1527 *******************************************************************************/ 1528 BTA_API extern tBTA_STATUS BTA_DmSetLocalDiRecord( tBTA_DI_RECORD *p_device_info, 1529 UINT32 *p_handle ); 1530 1531 /******************************************************************************* 1532 ** 1533 ** Function BTA_DmGetLocalDiRecord 1534 ** 1535 ** Description Get a specified DI record to the local SDP database. If no 1536 ** record handle is provided, the primary DI record will be 1537 ** returned. 1538 ** 1539 ** Returns BTA_SUCCESS if record set sucessfully, otherwise error code. 1540 ** 1541 *******************************************************************************/ 1542 BTA_API extern tBTA_STATUS BTA_DmGetLocalDiRecord( tBTA_DI_GET_RECORD *p_device_info, 1543 UINT32 *p_handle ); 1544 1545 /******************************************************************************* 1546 ** 1547 ** Function BTA_DmDiDiscover 1548 ** 1549 ** Description This function queries a remote device for DI information. 1550 ** 1551 ** Returns None. 1552 ** 1553 *******************************************************************************/ 1554 BTA_API extern void BTA_DmDiDiscover( BD_ADDR remote_device, tBTA_DISCOVERY_DB *p_db, 1555 UINT32 len, tBTA_DM_SEARCH_CBACK *p_cback ); 1556 1557 /******************************************************************************* 1558 ** 1559 ** Function BTA_DmGetDiRecord 1560 ** 1561 ** Description This function retrieves a remote device's DI record from 1562 ** the specified database. 1563 ** 1564 ** Returns None. 1565 ** 1566 *******************************************************************************/ 1567 BTA_API extern tBTA_STATUS BTA_DmGetDiRecord( UINT8 get_record_index, tBTA_DI_GET_RECORD *p_device_info, 1568 tBTA_DISCOVERY_DB *p_db ); 1569 1570 /******************************************************************************* 1571 ** 1572 ** 1573 ** Function BTA_DmCloseACL 1574 ** 1575 ** Description This function force to close an ACL connection and remove the 1576 ** device from the security database list of known devices. 1577 ** 1578 ** Parameters: bd_addr - Address of the peer device 1579 ** remove_dev - remove device or not after link down 1580 ** 1581 ** Returns void. 1582 ** 1583 *******************************************************************************/ 1584 BTA_API extern void BTA_DmCloseACL(BD_ADDR bd_addr, BOOLEAN remove_dev); 1585 1586 /******************************************************************************* 1587 ** 1588 ** Function BTA_SysFeatures 1589 ** 1590 ** Description This function is called to set system features. 1591 ** 1592 ** Returns void 1593 ** 1594 *******************************************************************************/ 1595 BTA_API extern void BTA_SysFeatures (UINT16 sys_features); 1596 1597 /******************************************************************************* 1598 ** 1599 ** Function bta_dmexecutecallback 1600 ** 1601 ** Description This function will request BTA to execute a call back in the context of BTU task 1602 ** This API was named in lower case because it is only intended 1603 ** for the internal customers(like BTIF). 1604 ** 1605 ** Returns void 1606 ** 1607 *******************************************************************************/ 1608 BTA_API extern void bta_dmexecutecallback (tBTA_DM_EXEC_CBACK* p_callback, void * p_param); 1609 1610 #if (BTM_SCO_HCI_INCLUDED == TRUE) 1611 /******************************************************************************* 1612 ** 1613 ** Function BTA_DmPcmInitSamples 1614 ** 1615 ** Description initialize the down sample converter. 1616 ** 1617 ** src_sps: original samples per second (source audio data) 1618 ** (ex. 44100, 48000) 1619 ** bits: number of bits per pcm sample (16) 1620 ** n_channels: number of channels (i.e. mono(1), stereo(2)...) 1621 ** 1622 ** Returns none 1623 ** 1624 *******************************************************************************/ 1625 BTA_API extern void BTA_DmPcmInitSamples (UINT32 src_sps, UINT32 bits, UINT32 n_channels); 1626 1627 /************************************************************************************** 1628 ** Function BTA_DmPcmResample 1629 ** 1630 ** Description Down sampling utility to convert higher sampling rate into 8K/16bits 1631 ** PCM samples. 1632 ** 1633 ** Parameters p_src: pointer to the buffer where the original sampling PCM 1634 ** are stored. 1635 ** in_bytes: Length of the input PCM sample buffer in byte. 1636 ** p_dst: pointer to the buffer which is to be used to store 1637 ** the converted PCM samples. 1638 ** 1639 ** 1640 ** Returns INT32: number of samples converted. 1641 ** 1642 **************************************************************************************/ 1643 BTA_API extern INT32 BTA_DmPcmResample (void *p_src, UINT32 in_bytes, void *p_dst); 1644 #endif 1645 1646 #if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) 1647 /* BLE related API functions */ 1648 /******************************************************************************* 1649 ** 1650 ** Function BTA_DmBleSecurityGrant 1651 ** 1652 ** Description Grant security request access. 1653 ** 1654 ** Parameters: bd_addr - BD address of the peer 1655 ** res - security grant status. 1656 ** 1657 ** Returns void 1658 ** 1659 *******************************************************************************/ 1660 BTA_API extern void BTA_DmBleSecurityGrant(BD_ADDR bd_addr, tBTA_DM_BLE_SEC_GRANT res); 1661 1662 1663 1664 /******************************************************************************* 1665 ** 1666 ** Function BTA_DmBleSetBgConnType 1667 ** 1668 ** Description This function is called to set BLE connectable mode for a 1669 ** peripheral device. 1670 ** 1671 ** Parameters bg_conn_type: it can be auto connection, or selective connection. 1672 ** p_select_cback: callback function when selective connection procedure 1673 ** is being used. 1674 ** 1675 ** Returns void 1676 ** 1677 *******************************************************************************/ 1678 BTA_API extern void BTA_DmBleSetBgConnType(tBTA_DM_BLE_CONN_TYPE bg_conn_type, tBTA_DM_BLE_SEL_CBACK *p_select_cback); 1679 1680 /******************************************************************************* 1681 ** 1682 ** Function BTA_DmBlePasskeyReply 1683 ** 1684 ** Description Send BLE SMP passkey reply. 1685 ** 1686 ** Parameters: bd_addr - BD address of the peer 1687 ** accept - passkey entry sucessful or declined. 1688 ** passkey - passkey value, must be a 6 digit number, 1689 ** can be lead by 0. 1690 ** 1691 ** Returns void 1692 ** 1693 *******************************************************************************/ 1694 BTA_API extern void BTA_DmBlePasskeyReply(BD_ADDR bd_addr, BOOLEAN accept, UINT32 passkey); 1695 1696 /******************************************************************************* 1697 ** 1698 ** Function BTA_DmAddBleDevice 1699 ** 1700 ** Description Add a BLE device. This function will be normally called 1701 ** during host startup to restore all required information 1702 ** for a LE device stored in the NVRAM. 1703 ** 1704 ** Parameters: bd_addr - BD address of the peer 1705 ** dev_type - Remote device's device type. 1706 ** addr_type - LE device address type. 1707 ** 1708 ** Returns void 1709 ** 1710 *******************************************************************************/ 1711 BTA_API extern void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type, 1712 tBT_DEVICE_TYPE dev_type); 1713 1714 1715 /******************************************************************************* 1716 ** 1717 ** Function BTA_DmAddBleKey 1718 ** 1719 ** Description Add/modify LE device information. This function will be 1720 ** normally called during host startup to restore all required 1721 ** information stored in the NVRAM. 1722 ** 1723 ** Parameters: bd_addr - BD address of the peer 1724 ** p_le_key - LE key values. 1725 ** key_type - LE SMP key type. 1726 ** 1727 ** Returns void 1728 ** 1729 *******************************************************************************/ 1730 BTA_API extern void BTA_DmAddBleKey (BD_ADDR bd_addr, tBTA_LE_KEY_VALUE *p_le_key, 1731 tBTA_LE_KEY_TYPE key_type); 1732 1733 /******************************************************************************* 1734 ** 1735 ** Function BTA_DmSetBlePrefConnParams 1736 ** 1737 ** Description This function is called to set the preferred connection 1738 ** parameters when default connection parameter is not desired. 1739 ** 1740 ** Parameters: bd_addr - BD address of the peripheral 1741 ** min_conn_int - minimum preferred connection interval 1742 ** max_conn_int - maximum preferred connection interval 1743 ** slave_latency - preferred slave latency 1744 ** supervision_tout - preferred supervision timeout 1745 ** 1746 ** 1747 ** Returns void 1748 ** 1749 *******************************************************************************/ 1750 BTA_API extern void BTA_DmSetBlePrefConnParams(BD_ADDR bd_addr, 1751 UINT16 min_conn_int, UINT16 max_conn_int, 1752 UINT16 slave_latency, UINT16 supervision_tout ); 1753 1754 /******************************************************************************* 1755 ** 1756 ** Function BTA_DmSetBleConnScanParams 1757 ** 1758 ** Description This function is called to set scan parameters used in 1759 ** BLE connection request 1760 ** 1761 ** Parameters: bd_addr - BD address of the peripheral 1762 ** scan_interval - scan interval 1763 ** scan_window - scan window 1764 ** 1765 ** Returns void 1766 ** 1767 *******************************************************************************/ 1768 BTA_API extern void BTA_DmSetBleConnScanParams(UINT16 scan_interval, 1769 UINT16 scan_window ); 1770 1771 /******************************************************************************* 1772 ** 1773 ** Function BTA_DmSetBleAdvParams 1774 ** 1775 ** Description This function sets the advertising parameters BLE functionality. 1776 ** It is to be called when device act in peripheral or broadcaster 1777 ** role. 1778 ** 1779 ** Parameters: adv_int_min - adv interval minimum 1780 ** adv_int_max - adv interval max 1781 ** p_dir_bda - directed adv initator address 1782 ** 1783 ** Returns void 1784 ** 1785 *******************************************************************************/ 1786 BTA_API extern void BTA_DmSetBleAdvParams (UINT16 adv_int_min, UINT16 adv_int_max, 1787 tBLE_BD_ADDR *p_dir_bda); 1788 /******************************************************************************* 1789 ** 1790 ** Function BTA_DmSearchExt 1791 ** 1792 ** Description This function searches for peer Bluetooth devices. It performs 1793 ** an inquiry and gets the remote name for devices. Service 1794 ** discovery is done if services is non zero 1795 ** 1796 ** Parameters p_dm_inq: inquiry conditions 1797 ** services: if service is not empty, service discovery will be done. 1798 ** for all GATT based service condition, put num_uuid, and 1799 ** p_uuid is the pointer to the list of UUID values. 1800 ** p_cback: callback functino when search is completed. 1801 ** 1802 ** 1803 ** 1804 ** Returns void 1805 ** 1806 *******************************************************************************/ 1807 BTA_API extern void BTA_DmSearchExt(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK_EXT *p_services, 1808 tBTA_DM_SEARCH_CBACK *p_cback); 1809 1810 /******************************************************************************* 1811 ** 1812 ** Function BTA_DmDiscoverExt 1813 ** 1814 ** Description This function does service discovery for services of a 1815 ** peer device. When services.num_uuid is 0, it indicates all 1816 ** GATT based services are to be searched; other wise a list of 1817 ** UUID of interested services should be provided through 1818 ** services.p_uuid. 1819 ** 1820 ** 1821 ** 1822 ** Returns void 1823 ** 1824 *******************************************************************************/ 1825 BTA_API extern void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services, 1826 tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search); 1827 1828 1829 /******************************************************************************* 1830 ** 1831 ** Function BTA_DmSetEncryption 1832 ** 1833 ** Description This function is called to ensure that connection is 1834 ** encrypted. Should be called only on an open connection. 1835 ** Typically only needed for connections that first want to 1836 ** bring up unencrypted links, then later encrypt them. 1837 ** 1838 ** Parameters: bd_addr - Address of the peer device 1839 ** p_callback - Pointer to callback function to indicat the 1840 ** link encryption status 1841 ** sec_act - This is the security action to indicate 1842 ** what knid of BLE security level is required for 1843 ** the BLE link if the BLE is supported 1844 ** Note: This parameter is ignored for the BR/EDR link 1845 ** or the BLE is not supported 1846 ** 1847 ** Returns void 1848 ** 1849 ** 1850 *******************************************************************************/ 1851 BTA_API extern void BTA_DmSetEncryption(BD_ADDR bd_addr, tBTA_DM_ENCRYPT_CBACK *p_callback, 1852 tBTA_DM_BLE_SEC_ACT sec_act); 1853 1854 1855 /******************************************************************************* 1856 ** 1857 ** Function BTA_DmBleObserve 1858 ** 1859 ** Description This procedure keep the device listening for advertising 1860 ** events from a broadcast device. 1861 ** 1862 ** Parameters start: start or stop observe. 1863 ** duration : Duration of the scan. Continuous scan if 0 is passed 1864 ** p_results_cb: Callback to be called with scan results 1865 ** 1866 ** Returns void 1867 ** 1868 *******************************************************************************/ 1869 BTA_API extern void BTA_DmBleObserve(BOOLEAN start, UINT8 duration, 1870 tBTA_DM_SEARCH_CBACK *p_results_cb); 1871 1872 1873 #endif 1874 1875 // btla-specific ++ 1876 /******************************************************************************* 1877 ** 1878 ** Function BTA_DmSetAfhChannelAssessment 1879 ** 1880 ** Description This function is called to set the channel assessment mode on or off 1881 ** 1882 ** Returns status 1883 ** 1884 *******************************************************************************/ 1885 BTA_API extern void BTA_DmSetAfhChannelAssessment (BOOLEAN enable_or_disable); 1886 1887 #if BLE_INCLUDE == TRUE 1888 // btla-specific -- 1889 /******************************************************************************* 1890 ** 1891 ** Function BTA_DmBleConfigLocalPrivacy 1892 ** 1893 ** Description Enable/disable privacy on the local device 1894 ** 1895 ** Parameters: privacy_enable - enable/disabe privacy on remote device. 1896 ** 1897 ** Returns void 1898 ** 1899 *******************************************************************************/ 1900 BTA_API extern void BTA_DmBleConfigLocalPrivacy(BOOLEAN privacy_enable); 1901 1902 /******************************************************************************* 1903 ** 1904 ** Function BTA_DmBleEnableRemotePrivacy 1905 ** 1906 ** Description Enable/disable privacy on a remote device 1907 ** 1908 ** Parameters: bd_addr - BD address of the peer 1909 ** privacy_enable - enable/disabe privacy on remote device. 1910 ** 1911 ** Returns void 1912 ** 1913 *******************************************************************************/ 1914 BTA_API extern void BTA_DmBleEnableRemotePrivacy(BD_ADDR bd_addr, BOOLEAN privacy_enable); 1915 1916 1917 /******************************************************************************* 1918 ** 1919 ** Function BTA_DmBleSetAdvConfig 1920 ** 1921 ** Description This function is called to override the BTA default ADV parameters. 1922 ** 1923 ** Parameters Pointer to User defined ADV data structure 1924 ** 1925 ** Returns None 1926 ** 1927 *******************************************************************************/ 1928 BTA_API extern void BTA_DmBleSetAdvConfig (tBTA_BLE_AD_MASK data_mask, 1929 tBTA_BLE_ADV_DATA *p_adv_cfg); 1930 #endif 1931 1932 #ifdef __cplusplus 1933 } 1934 #endif 1935 1936 #endif /* BTA_API_H */ 1937 1938
