1 /* 2 * Copyright (C) 2011 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 #ifndef SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H 18 #define SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H 19 20 #include <stdint.h> 21 22 #ifdef __cplusplus 23 extern "C" { 24 #endif 25 26 /* 27 * If the HAL needs to create service threads to handle graphics related 28 * tasks, these threads need to run at HAL_PRIORITY_URGENT_DISPLAY priority 29 * if they can block the main rendering thread in any way. 30 * 31 * the priority of the current thread can be set with: 32 * 33 * #include <sys/resource.h> 34 * setpriority(PRIO_PROCESS, 0, HAL_PRIORITY_URGENT_DISPLAY); 35 * 36 */ 37 38 #define HAL_PRIORITY_URGENT_DISPLAY (-8) 39 40 /** 41 * pixel format definitions 42 */ 43 44 enum { 45 /* 46 * "linear" color pixel formats: 47 * 48 * The pixel formats below contain sRGB data but are otherwise treated 49 * as linear formats, i.e.: no special operation is performed when 50 * reading or writing into a buffer in one of these formats 51 */ 52 HAL_PIXEL_FORMAT_RGBA_8888 = 1, 53 HAL_PIXEL_FORMAT_RGBX_8888 = 2, 54 HAL_PIXEL_FORMAT_RGB_888 = 3, 55 HAL_PIXEL_FORMAT_RGB_565 = 4, 56 HAL_PIXEL_FORMAT_BGRA_8888 = 5, 57 58 /* 59 * sRGB color pixel formats: 60 * 61 * The red, green and blue components are stored in sRGB space, and converted 62 * to linear space when read, using the standard sRGB to linear equation: 63 * 64 * Clinear = Csrgb / 12.92 for Csrgb <= 0.04045 65 * = (Csrgb + 0.055 / 1.055)^2.4 for Csrgb > 0.04045 66 * 67 * When written the inverse transformation is performed: 68 * 69 * Csrgb = 12.92 * Clinear for Clinear <= 0.0031308 70 * = 1.055 * Clinear^(1/2.4) - 0.055 for Clinear > 0.0031308 71 * 72 * 73 * The alpha component, if present, is always stored in linear space and 74 * is left unmodified when read or written. 75 * 76 */ 77 HAL_PIXEL_FORMAT_sRGB_A_8888 = 0xC, 78 HAL_PIXEL_FORMAT_sRGB_X_8888 = 0xD, 79 80 /* 81 * 0x100 - 0x1FF 82 * 83 * This range is reserved for pixel formats that are specific to the HAL 84 * implementation. Implementations can use any value in this range to 85 * communicate video pixel formats between their HAL modules. These formats 86 * must not have an alpha channel. Additionally, an EGLimage created from a 87 * gralloc buffer of one of these formats must be supported for use with the 88 * GL_OES_EGL_image_external OpenGL ES extension. 89 */ 90 91 /* 92 * Android YUV format: 93 * 94 * This format is exposed outside of the HAL to software decoders and 95 * applications. EGLImageKHR must support it in conjunction with the 96 * OES_EGL_image_external extension. 97 * 98 * YV12 is a 4:2:0 YCrCb planar format comprised of a WxH Y plane followed 99 * by (W/2) x (H/2) Cr and Cb planes. 100 * 101 * This format assumes 102 * - an even width 103 * - an even height 104 * - a horizontal stride multiple of 16 pixels 105 * - a vertical stride equal to the height 106 * 107 * y_size = stride * height 108 * c_stride = ALIGN(stride/2, 16) 109 * c_size = c_stride * height/2 110 * size = y_size + c_size * 2 111 * cr_offset = y_size 112 * cb_offset = y_size + c_size 113 * 114 */ 115 HAL_PIXEL_FORMAT_YV12 = 0x32315659, // YCrCb 4:2:0 Planar 116 117 118 /* 119 * Android Y8 format: 120 * 121 * This format is exposed outside of the HAL to the framework. 122 * The expected gralloc usage flags are SW_* and HW_CAMERA_*, 123 * and no other HW_ flags will be used. 124 * 125 * Y8 is a YUV planar format comprised of a WxH Y plane, 126 * with each pixel being represented by 8 bits. 127 * 128 * It is equivalent to just the Y plane from YV12. 129 * 130 * This format assumes 131 * - an even width 132 * - an even height 133 * - a horizontal stride multiple of 16 pixels 134 * - a vertical stride equal to the height 135 * 136 * size = stride * height 137 * 138 */ 139 HAL_PIXEL_FORMAT_Y8 = 0x20203859, 140 141 /* 142 * Android Y16 format: 143 * 144 * This format is exposed outside of the HAL to the framework. 145 * The expected gralloc usage flags are SW_* and HW_CAMERA_*, 146 * and no other HW_ flags will be used. 147 * 148 * Y16 is a YUV planar format comprised of a WxH Y plane, 149 * with each pixel being represented by 16 bits. 150 * 151 * It is just like Y8, but has double the bits per pixel (little endian). 152 * 153 * This format assumes 154 * - an even width 155 * - an even height 156 * - a horizontal stride multiple of 16 pixels 157 * - a vertical stride equal to the height 158 * - strides are specified in pixels, not in bytes 159 * 160 * size = stride * height * 2 161 * 162 */ 163 HAL_PIXEL_FORMAT_Y16 = 0x20363159, 164 165 /* 166 * Android RAW sensor format: 167 * 168 * This format is exposed outside of the HAL to applications. 169 * 170 * RAW_SENSOR is a single-channel 16-bit format, typically representing raw 171 * Bayer-pattern images from an image sensor, with minimal processing. 172 * 173 * The exact pixel layout of the data in the buffer is sensor-dependent, and 174 * needs to be queried from the camera device. 175 * 176 * Generally, not all 16 bits are used; more common values are 10 or 12 177 * bits. All parameters to interpret the raw data (black and white points, 178 * color space, etc) must be queried from the camera device. 179 * 180 * This format assumes 181 * - an even width 182 * - an even height 183 * - a horizontal stride multiple of 16 pixels (32 bytes). 184 */ 185 HAL_PIXEL_FORMAT_RAW_SENSOR = 0x20, 186 187 /* 188 * Android binary blob graphics buffer format: 189 * 190 * This format is used to carry task-specific data which does not have a 191 * standard image structure. The details of the format are left to the two 192 * endpoints. 193 * 194 * A typical use case is for transporting JPEG-compressed images from the 195 * Camera HAL to the framework or to applications. 196 * 197 * Buffers of this format must have a height of 1, and width equal to their 198 * size in bytes. 199 */ 200 HAL_PIXEL_FORMAT_BLOB = 0x21, 201 202 /* 203 * Android format indicating that the choice of format is entirely up to the 204 * device-specific Gralloc implementation. 205 * 206 * The Gralloc implementation should examine the usage bits passed in when 207 * allocating a buffer with this format, and it should derive the pixel 208 * format from those usage flags. This format will never be used with any 209 * of the GRALLOC_USAGE_SW_* usage flags. 210 * 211 * If a buffer of this format is to be used as an OpenGL ES texture, the 212 * framework will assume that sampling the texture will always return an 213 * alpha value of 1.0 (i.e. the buffer contains only opaque pixel values). 214 * 215 */ 216 HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED = 0x22, 217 218 /* 219 * Android flexible YCbCr formats 220 * 221 * This format allows platforms to use an efficient YCbCr/YCrCb buffer 222 * layout, while still describing the buffer layout in a way accessible to 223 * the CPU in a device-independent manner. While called YCbCr, it can be 224 * used to describe formats with either chromatic ordering, as well as 225 * whole planar or semiplanar layouts. 226 * 227 * struct android_ycbcr (below) is the the struct used to describe it. 228 * 229 * This format must be accepted by the gralloc module when 230 * USAGE_HW_CAMERA_WRITE and USAGE_SW_READ_* are set. 231 * 232 * This format is locked for use by gralloc's (*lock_ycbcr) method, and 233 * locking with the (*lock) method will return an error. 234 */ 235 HAL_PIXEL_FORMAT_YCbCr_420_888 = 0x23, 236 237 /* Legacy formats (deprecated), used by ImageFormat.java */ 238 HAL_PIXEL_FORMAT_YCbCr_422_SP = 0x10, // NV16 239 HAL_PIXEL_FORMAT_YCrCb_420_SP = 0x11, // NV21 240 HAL_PIXEL_FORMAT_YCbCr_422_I = 0x14, // YUY2 241 }; 242 243 /* 244 * Structure for describing YCbCr formats for consumption by applications. 245 * This is used with HAL_PIXEL_FORMAT_YCbCr_*_888. 246 * 247 * Buffer chroma subsampling is defined in the format. 248 * e.g. HAL_PIXEL_FORMAT_YCbCr_420_888 has subsampling 4:2:0. 249 * 250 * Buffers must have a 8 bit depth. 251 * 252 * @y, @cb, and @cr point to the first byte of their respective planes. 253 * 254 * Stride describes the distance in bytes from the first value of one row of 255 * the image to the first value of the next row. It includes the width of the 256 * image plus padding. 257 * @ystride is the stride of the luma plane. 258 * @cstride is the stride of the chroma planes. 259 * 260 * @chroma_step is the distance in bytes from one chroma pixel value to the 261 * next. This is 2 bytes for semiplanar (because chroma values are interleaved 262 * and each chroma value is one byte) and 1 for planar. 263 */ 264 265 struct android_ycbcr { 266 void *y; 267 void *cb; 268 void *cr; 269 size_t ystride; 270 size_t cstride; 271 size_t chroma_step; 272 273 /** reserved for future use, set to 0 by gralloc's (*lock_ycbcr)() */ 274 uint32_t reserved[8]; 275 }; 276 277 /** 278 * Transformation definitions 279 * 280 * IMPORTANT NOTE: 281 * HAL_TRANSFORM_ROT_90 is applied CLOCKWISE and AFTER HAL_TRANSFORM_FLIP_{H|V}. 282 * 283 */ 284 285 enum { 286 /* flip source image horizontally (around the vertical axis) */ 287 HAL_TRANSFORM_FLIP_H = 0x01, 288 /* flip source image vertically (around the horizontal axis)*/ 289 HAL_TRANSFORM_FLIP_V = 0x02, 290 /* rotate source image 90 degrees clockwise */ 291 HAL_TRANSFORM_ROT_90 = 0x04, 292 /* rotate source image 180 degrees */ 293 HAL_TRANSFORM_ROT_180 = 0x03, 294 /* rotate source image 270 degrees clockwise */ 295 HAL_TRANSFORM_ROT_270 = 0x07, 296 /* don't use. see system/window.h */ 297 HAL_TRANSFORM_RESERVED = 0x08, 298 }; 299 300 #ifdef __cplusplus 301 } 302 #endif 303 304 #endif /* SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H */ 305
