1 /* 2 * Copyright (C) 2009 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 #ifndef DALVIK_INDIRECTREFTABLE_H_ 18 #define DALVIK_INDIRECTREFTABLE_H_ 19 20 /* 21 * Maintain a table of indirect references. Used for local/global JNI 22 * references. 23 * 24 * The table contains object references that are part of the GC root set. 25 * When an object is added we return an IndirectRef that is not a valid 26 * pointer but can be used to find the original value in O(1) time. 27 * Conversions to and from indirect refs are performed on JNI method calls 28 * in and out of the VM, so they need to be very fast. 29 * 30 * To be efficient for JNI local variable storage, we need to provide 31 * operations that allow us to operate on segments of the table, where 32 * segments are pushed and popped as if on a stack. For example, deletion 33 * of an entry should only succeed if it appears in the current segment, 34 * and we want to be able to strip off the current segment quickly when 35 * a method returns. Additions to the table must be made in the current 36 * segment even if space is available in an earlier area. 37 * 38 * A new segment is created when we call into native code from interpreted 39 * code, or when we handle the JNI PushLocalFrame function. 40 * 41 * The GC must be able to scan the entire table quickly. 42 * 43 * In summary, these must be very fast: 44 * - adding or removing a segment 45 * - adding references to a new segment 46 * - converting an indirect reference back to an Object 47 * These can be a little slower, but must still be pretty quick: 48 * - adding references to a "mature" segment 49 * - removing individual references 50 * - scanning the entire table straight through 51 * 52 * If there's more than one segment, we don't guarantee that the table 53 * will fill completely before we fail due to lack of space. We do ensure 54 * that the current segment will pack tightly, which should satisfy JNI 55 * requirements (e.g. EnsureLocalCapacity). 56 * 57 * To make everything fit nicely in 32-bit integers, the maximum size of 58 * the table is capped at 64K. 59 * 60 * None of the table functions are synchronized. 61 */ 62 63 /* 64 * Indirect reference definition. This must be interchangeable with JNI's 65 * jobject, and it's convenient to let null be null, so we use void*. 66 * 67 * We need a 16-bit table index and a 2-bit reference type (global, local, 68 * weak global). Real object pointers will have zeroes in the low 2 or 3 69 * bits (4- or 8-byte alignment), so it's useful to put the ref type 70 * in the low bits and reserve zero as an invalid value. 71 * 72 * The remaining 14 bits can be used to detect stale indirect references. 73 * For example, if objects don't move, we can use a hash of the original 74 * Object* to make sure the entry hasn't been re-used. (If the Object* 75 * we find there doesn't match because of heap movement, we could do a 76 * secondary check on the preserved hash value; this implies that creating 77 * a global/local ref queries the hash value and forces it to be saved.) 78 * 79 * A more rigorous approach would be to put a serial number in the extra 80 * bits, and keep a copy of the serial number in a parallel table. This is 81 * easier when objects can move, but requires 2x the memory and additional 82 * memory accesses on add/get. It will catch additional problems, e.g.: 83 * create iref1 for obj, delete iref1, create iref2 for same obj, lookup 84 * iref1. A pattern based on object bits will miss this. 85 * 86 * For now, we use a serial number. 87 */ 88 typedef void* IndirectRef; 89 90 /* magic failure value; must not pass dvmIsHeapAddress() */ 91 #define kInvalidIndirectRefObject reinterpret_cast<Object*>(0xdead4321) 92 93 #define kClearedJniWeakGlobal reinterpret_cast<Object*>(0xdead1234) 94 95 /* 96 * Indirect reference kind, used as the two low bits of IndirectRef. 97 * 98 * For convenience these match up with enum jobjectRefType from jni.h. 99 */ 100 enum IndirectRefKind { 101 kIndirectKindInvalid = 0, 102 kIndirectKindLocal = 1, 103 kIndirectKindGlobal = 2, 104 kIndirectKindWeakGlobal = 3 105 }; 106 const char* indirectRefKindToString(IndirectRefKind kind); 107 108 /* 109 * Determine what kind of indirect reference this is. 110 */ 111 INLINE IndirectRefKind indirectRefKind(IndirectRef iref) 112 { 113 return (IndirectRefKind)((u4) iref & 0x03); 114 } 115 116 /* 117 * Information we store for each slot in the reference table. 118 */ 119 struct IndirectRefSlot { 120 Object* obj; /* object pointer itself, NULL if the slot is unused */ 121 u4 serial; /* slot serial number */ 122 }; 123 124 /* use as initial value for "cookie", and when table has only one segment */ 125 #define IRT_FIRST_SEGMENT 0 126 127 /* 128 * Table definition. 129 * 130 * For the global reference table, the expected common operations are 131 * adding a new entry and removing a recently-added entry (usually the 132 * most-recently-added entry). For JNI local references, the common 133 * operations are adding a new entry and removing an entire table segment. 134 * 135 * If "alloc_entries_" is not equal to "max_entries_", the table may expand 136 * when entries are added, which means the memory may move. If you want 137 * to keep pointers into "table" rather than offsets, you must use a 138 * fixed-size table. 139 * 140 * If we delete entries from the middle of the list, we will be left with 141 * "holes". We track the number of holes so that, when adding new elements, 142 * we can quickly decide to do a trivial append or go slot-hunting. 143 * 144 * When the top-most entry is removed, any holes immediately below it are 145 * also removed. Thus, deletion of an entry may reduce "topIndex" by more 146 * than one. 147 * 148 * To get the desired behavior for JNI locals, we need to know the bottom 149 * and top of the current "segment". The top is managed internally, and 150 * the bottom is passed in as a function argument (the VM keeps it in a 151 * slot in the interpreted stack frame). When we call a native method or 152 * push a local frame, the current top index gets pushed on, and serves 153 * as the new bottom. When we pop a frame off, the value from the stack 154 * becomes the new top index, and the value stored in the previous frame 155 * becomes the new bottom. 156 * 157 * To avoid having to re-scan the table after a pop, we want to push the 158 * number of holes in the table onto the stack. Because of our 64K-entry 159 * cap, we can combine the two into a single unsigned 32-bit value. 160 * Instead of a "bottom" argument we take a "cookie", which includes the 161 * bottom index and the count of holes below the bottom. 162 * 163 * We need to minimize method call/return overhead. If we store the 164 * "cookie" externally, on the interpreted call stack, the VM can handle 165 * pushes and pops with a single 4-byte load and store. (We could also 166 * store it internally in a public structure, but the local JNI refs are 167 * logically tied to interpreted stack frames anyway.) 168 * 169 * Common alternative implementation: make IndirectRef a pointer to the 170 * actual reference slot. Instead of getting a table and doing a lookup, 171 * the lookup can be done instantly. Operations like determining the 172 * type and deleting the reference are more expensive because the table 173 * must be hunted for (i.e. you have to do a pointer comparison to see 174 * which table it's in), you can't move the table when expanding it (so 175 * realloc() is out), and tricks like serial number checking to detect 176 * stale references aren't possible (though we may be able to get similar 177 * benefits with other approaches). 178 * 179 * TODO: consider a "lastDeleteIndex" for quick hole-filling when an 180 * add immediately follows a delete; must invalidate after segment pop 181 * (which could increase the cost/complexity of method call/return). 182 * Might be worth only using it for JNI globals. 183 * 184 * TODO: may want completely different add/remove algorithms for global 185 * and local refs to improve performance. A large circular buffer might 186 * reduce the amortized cost of adding global references. 187 * 188 * TODO: if we can guarantee that the underlying storage doesn't move, 189 * e.g. by using oversized mmap regions to handle expanding tables, we may 190 * be able to avoid having to synchronize lookups. Might make sense to 191 * add a "synchronized lookup" call that takes the mutex as an argument, 192 * and either locks or doesn't lock based on internal details. 193 */ 194 union IRTSegmentState { 195 u4 all; 196 struct { 197 u4 topIndex:16; /* index of first unused entry */ 198 u4 numHoles:16; /* #of holes in entire table */ 199 } parts; 200 }; 201 202 class iref_iterator { 203 public: 204 explicit iref_iterator(IndirectRefSlot* table, size_t i, size_t capacity) : 205 table_(table), i_(i), capacity_(capacity) { 206 skipNullsAndTombstones(); 207 } 208 209 iref_iterator& operator++() { 210 ++i_; 211 skipNullsAndTombstones(); 212 return *this; 213 } 214 215 Object** operator*() { 216 return &table_[i_].obj; 217 } 218 219 bool equals(const iref_iterator& rhs) const { 220 return (i_ == rhs.i_ && table_ == rhs.table_); 221 } 222 223 private: 224 void skipNullsAndTombstones() { 225 // We skip NULLs and tombstones. Clients don't want to see implementation details. 226 while (i_ < capacity_ && (table_[i_].obj == NULL 227 || table_[i_].obj == kClearedJniWeakGlobal)) { 228 ++i_; 229 } 230 } 231 232 IndirectRefSlot* table_; 233 size_t i_; 234 size_t capacity_; 235 }; 236 237 bool inline operator!=(const iref_iterator& lhs, const iref_iterator& rhs) { 238 return !lhs.equals(rhs); 239 } 240 241 struct IndirectRefTable { 242 public: 243 typedef iref_iterator iterator; 244 245 /* semi-public - read/write by interpreter in native call handler */ 246 IRTSegmentState segmentState; 247 248 /* 249 * private: 250 * 251 * TODO: we can't make these private as long as the interpreter 252 * uses offsetof, since private member data makes us non-POD. 253 */ 254 /* bottom of the stack */ 255 IndirectRefSlot* table_; 256 /* bit mask, ORed into all irefs */ 257 IndirectRefKind kind_; 258 /* #of entries we have space for */ 259 size_t alloc_entries_; 260 /* max #of entries allowed */ 261 size_t max_entries_; 262 263 // TODO: want hole-filling stats (#of holes filled, total entries scanned) 264 // for performance evaluation. 265 266 /* 267 * Add a new entry. "obj" must be a valid non-NULL object reference 268 * (though it's okay if it's not fully-formed, e.g. the result from 269 * dvmMalloc doesn't have obj->clazz set). 270 * 271 * Returns NULL if the table is full (max entries reached, or alloc 272 * failed during expansion). 273 */ 274 IndirectRef add(u4 cookie, Object* obj); 275 276 /* 277 * Given an IndirectRef in the table, return the Object it refers to. 278 * 279 * Returns kInvalidIndirectRefObject if iref is invalid. 280 */ 281 Object* get(IndirectRef iref) const; 282 283 /* 284 * Returns true if the table contains a reference to this object. 285 */ 286 bool contains(const Object* obj) const; 287 288 /* 289 * Remove an existing entry. 290 * 291 * If the entry is not between the current top index and the bottom index 292 * specified by the cookie, we don't remove anything. This is the behavior 293 * required by JNI's DeleteLocalRef function. 294 * 295 * Returns "false" if nothing was removed. 296 */ 297 bool remove(u4 cookie, IndirectRef iref); 298 299 /* 300 * Initialize an IndirectRefTable. 301 * 302 * If "initialCount" != "maxCount", the table will expand as required. 303 * 304 * "kind" should be Local or Global. The Global table may also hold 305 * WeakGlobal refs. 306 * 307 * Returns "false" if table allocation fails. 308 */ 309 bool init(size_t initialCount, size_t maxCount, IndirectRefKind kind); 310 311 /* 312 * Clear out the contents, freeing allocated storage. 313 * 314 * You must call dvmInitReferenceTable() before you can re-use this table. 315 * 316 * TODO: this should be a destructor. 317 */ 318 void destroy(); 319 320 /* 321 * Dump the contents of a reference table to the log file. 322 * 323 * The caller should lock any external sync before calling. 324 * 325 * TODO: we should name the table in a constructor and remove 326 * the argument here. 327 */ 328 void dump(const char* descr) const; 329 330 /* 331 * Return the #of entries in the entire table. This includes holes, and 332 * so may be larger than the actual number of "live" entries. 333 */ 334 size_t capacity() const { 335 return segmentState.parts.topIndex; 336 } 337 338 iterator begin() { 339 return iterator(table_, 0, capacity()); 340 } 341 342 iterator end() { 343 return iterator(table_, capacity(), capacity()); 344 } 345 346 private: 347 static inline u4 extractIndex(IndirectRef iref) { 348 u4 uref = (u4) iref; 349 return (uref >> 2) & 0xffff; 350 } 351 352 static inline u4 extractSerial(IndirectRef iref) { 353 u4 uref = (u4) iref; 354 return uref >> 20; 355 } 356 357 static inline u4 nextSerial(u4 serial) { 358 return (serial + 1) & 0xfff; 359 } 360 361 static inline IndirectRef toIndirectRef(u4 index, u4 serial, IndirectRefKind kind) { 362 assert(index < 65536); 363 return reinterpret_cast<IndirectRef>((serial << 20) | (index << 2) | kind); 364 } 365 }; 366 367 #endif // DALVIK_INDIRECTREFTABLE_H_ 368