Lines Matching full:suspend
54 from going into suspend state. Blame is shared across these apps (not necessarily equally).
166 System suspended/resumed state. When the screen is off the system may enter a suspend state
170 See Controlling and Measuring System Suspend State for more instructions.
186 prevent system suspend. The current readings in this state should be stable. Take the reading
209 Controlling and Measuring System Suspend State
212 As mentioned above, system suspend can introduce unwanted variance in power measurements and
214 But at some point you?ll also need to measure the power draw of system suspend state. This
215 section describes how to avoid system suspend state when you don?t want it to interfere with
216 other measurements, and how to measure the power draw of system suspend state when you do
220 To avoid system suspend you can temporarily connect the device to a development host and
237 The power consumption of the system suspend state is measured for the value of cpu.idle in
240 from the portions of the SoC controlled by the system suspend. To ensure the measurement is
243 the suspend state of the SoC entered plus the consumption of additional system components
245 system status (such as turning off an LED when not in suspend) may also be observed during
319 For the <code>cpu.active</code> value you can measure the power consumed when the system is not in suspend
358 holding a partial wakelock so the system doesn't go to suspend, and turning on and off the
372 system suspend (sleep) state with Wi-Fi enabled vs. disabled.
521 (and the SoC) are in system suspend state </td>
530 in scheduling idle state (kernel idle loop); system is not in system suspend state </td>
