Lines Matching full:configuration
13 Wi-Fi Protected Setup (WPS) is a mechanism for easy configuration of a
15 passphrase/PSK) and configuration of an access point and client
17 with PIN method and push-button configuration (PBC) being the most
53 wpa_supplicant configuration
57 wpa_supplicant build configuration (.config). Here is an example
58 configuration that includes WPS support and Linux nl80211 -based
76 the device. This is configured in the runtime configuration for
83 The network configuration blocks needed for WPS are added
85 to be added explicitly in the configuration file.
90 to allow configuration file updates:
160 current AP configuration and optionally, to configure an AP,
172 In order to change the AP configuration, the new configuration
193 a guided WPS configuration to the user. In addition, control interface
214 its configuration internally. However, it is possible to
220 configuration based on them.
263 - learn AP configuration
266 - use AP configuration from a locally configured network (e.g., from
267 wps_reg command); this does not change the AP's configuration, but
268 only prepares a configuration to be used when enrolling a new device
321 WPS can be used with NFC-based configuration method. An NFC tag
324 with a configuration token can be used to transfer AP settings without
332 in the configuration file (wps_nfc_dev_pw_id, wps_nfc_dh_pubkey,
340 NFC configuration token when wpa_supplicant is controlling an AP
342 hexdump of the current AP configuration (WPS parameter requests this to
345 tag with an external program. Once written, the NFC configuration token
350 to build an NFC configuration token based on a locally configured
360 If the NFC tag contains a configuration token, the network is added to
361 wpa_supplicant configuration. If the NFC tag contains a password token,
404 used to build an NFC configuration token for the specified AP when
406 command is a hexdump of the selected AP configuration
410 NFC configuration token can be used to touch an NFC interface on a
