Lines Matching defs:PRINTF
64 /* to get some global routines like printf */
351 #define PRINTF(x) printf x
353 #define PRINTF(x) /**/
357 #define PRINTF2(x) printf x
532 printf("%s: error: %#hX", SK_NAME, csr0);
536 printf(", Packet dropped.");
563 printf("%s: packet too long\n", SK_NAME);
579 printf("%s: RX error: %#hX\n", SK_NAME, (int) rmdstat);
677 printf("%s: error: %#hX", SK_NAME, csr0);
681 printf(", Packet dropped.");
699 printf("%s: TX error: %#hX %#hX\n", SK_NAME, (int) tmdstat,
704 printf("%s: tdr-problems \n", SK_NAME);
733 PRINTF(("## %s: At beginning of SK_disable(). CSR0: %#hX\n",
735 PRINTF(("%s: Shutting %s down CSR0 %#hX\n", SK_NAME, SK_NAME,
791 printf("%s: SK_ADDR %#hX is not valid. Check configuration.\n",
806 PRINTF(("adr[0]: %hX, adr[1]: %hX, adr[2]: %hX\n",
821 PRINTF(("## %s: We did not find SK_G16 at RAM location.\n",
835 printf("Schneider & Koch G16 at %#hX, mem at %#hX, HW addr: %!\n",
861 printf("## %s: After lance init. CSR0: %#hX\n",
864 printf("## %s: LANCE stopped. CSR0: %#hX\n",
867 printf("## %s: Reinit with DTX + DRX off. CSR0: %#hX\n",
870 printf("## %s: LANCE stopped. CSR0: %#hX\n",
873 printf("## %s: LANCE back to normal mode. CSR0: %#hX\n",
883 PRINTF(("## %s: LANCE init failed: CSR0: %#hX\n",
904 PRINTF(("## %s: At beginning of LANCE init. CSR0: %#hX\n",
991 PRINTF(("## %s: After setting CSR1-3. CSR0: %#hX\n",
1012 printf("%s: can't init am7990, status: %#hX "
1024 PRINTF(("## %s: init done after %d ticks\n", SK_NAME, i));
1030 PRINTF(("## %s: LANCE started. CSR0: %#hX\n", SK_NAME,
1046 PRINTF(("## %s: At beginning of SK_reset_board.\n", SK_NAME));
1117 printf("## %s: %s.\n"
1129 printf("## %s: RAM Details.\n"
1137 printf("## ");
1143 printf("\n## ");
1145 printf("tmdbufs%d: %#hX ", (i+1), (int) p->tmdbufs[i]);
1147 printf("## ");
1153 printf("\n## ");
1155 printf("rmdbufs%d: %#hX ", (i+1), (int) p->rmdbufs[i]);
