Lines Matching full:scan
88 # uses the scan results to select a suitable AP. Another alternative is to
108 # created immediately regardless of scan results. ap_scan=1 mode will first try
109 # to scan for existing networks and only if no matches with the enabled
235 # This can be used to limit memory use on the BSS entries (cached scan
240 # Automatic scan
251 # So a delay of 30 seconds will be applied between each scan
253 # filter_ssids - SSID-based scan result filtering
254 # 0 = do not filter scan results (default)
255 # 1 = only include configured SSIDs in scan results/BSS table
305 # Ignore scan results older than request
307 # The driver may have a cache of scan results that makes it return
308 # information that is older than our scan trigger. This parameter can
313 # scan_cur_freq: Whether to scan only the current frequency
314 # 0: Scan all available frequencies. (Default)
315 # 1: Scan current operating frequency if another VIF on the same radio
333 # credentials have been configured and scan did not find a
483 # 0 = do not scan this SSID with specific Probe Request frames (default)
484 # 1 = scan with SSID-specific Probe Request frames (this can be used to
496 # priority value, the sooner the network is matched against the scan results).
520 # scan_freq: List of frequencies to scan
521 # Space-separated list of frequencies in MHz to scan when searching for this
528 # set, scan results that do not match any of the specified frequencies are not
619 # SSID, are allowed when selecting a BSS from scan results.
1248 # Example config file that will only scan on channel 36.
